| /* |
| * Altera 10/100/1000 triple speed ethernet mac driver |
| * |
| * Copyright (C) 2008 Altera Corporation. |
| * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| #include <config.h> |
| #include <common.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <command.h> |
| #include <asm/cache.h> |
| #include <asm/dma-mapping.h> |
| #include <miiphy.h> |
| #include "altera_tse.h" |
| |
| /* sgdma debug - print descriptor */ |
| static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc) |
| { |
| debug("SGDMA DEBUG :\n"); |
| debug("desc->source : 0x%x \n", (unsigned int)desc->source); |
| debug("desc->destination : 0x%x \n", (unsigned int)desc->destination); |
| debug("desc->next : 0x%x \n", (unsigned int)desc->next); |
| debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad); |
| debug("desc->destination_pad : 0x%x \n", |
| (unsigned int)desc->destination_pad); |
| debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad); |
| debug("desc->bytes_to_transfer : 0x%x \n", |
| (unsigned int)desc->bytes_to_transfer); |
| debug("desc->actual_bytes_transferred : 0x%x \n", |
| (unsigned int)desc->actual_bytes_transferred); |
| debug("desc->descriptor_status : 0x%x \n", |
| (unsigned int)desc->descriptor_status); |
| debug("desc->descriptor_control : 0x%x \n", |
| (unsigned int)desc->descriptor_control); |
| } |
| |
| /* This is a generic routine that the SGDMA mode-specific routines |
| * call to populate a descriptor. |
| * arg1 :pointer to first SGDMA descriptor. |
| * arg2 :pointer to next SGDMA descriptor. |
| * arg3 :Address to where data to be written. |
| * arg4 :Address from where data to be read. |
| * arg5 :no of byte to transaction. |
| * arg6 :variable indicating to generate start of packet or not |
| * arg7 :read fixed |
| * arg8 :write fixed |
| * arg9 :read burst |
| * arg10 :write burst |
| * arg11 :atlantic_channel number |
| */ |
| static void alt_sgdma_construct_descriptor_burst( |
| volatile struct alt_sgdma_descriptor *desc, |
| volatile struct alt_sgdma_descriptor *next, |
| unsigned int *read_addr, |
| unsigned int *write_addr, |
| unsigned short length_or_eop, |
| int generate_eop, |
| int read_fixed, |
| int write_fixed_or_sop, |
| int read_burst, |
| int write_burst, |
| unsigned char atlantic_channel) |
| { |
| /* |
| * Mark the "next" descriptor as "not" owned by hardware. This prevents |
| * The SGDMA controller from continuing to process the chain. This is |
| * done as a single IO write to bypass cache, without flushing |
| * the entire descriptor, since only the 8-bit descriptor status must |
| * be flushed. |
| */ |
| if (!next) |
| debug("Next descriptor not defined!!\n"); |
| |
| next->descriptor_control = (next->descriptor_control & |
| ~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK); |
| |
| desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF); |
| desc->destination = |
| (unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF); |
| desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF); |
| desc->source_pad = 0x0; |
| desc->destination_pad = 0x0; |
| desc->next_pad = 0x0; |
| desc->bytes_to_transfer = length_or_eop; |
| desc->actual_bytes_transferred = 0; |
| desc->descriptor_status = 0x0; |
| |
| /* SGDMA burst not currently supported */ |
| desc->read_burst = 0; |
| desc->write_burst = 0; |
| |
| /* |
| * Set the descriptor control block as follows: |
| * - Set "owned by hardware" bit |
| * - Optionally set "generate EOP" bit |
| * - Optionally set the "read from fixed address" bit |
| * - Optionally set the "write to fixed address bit (which serves |
| * serves as a "generate SOP" control bit in memory-to-stream mode). |
| * - Set the 4-bit atlantic channel, if specified |
| * |
| * Note this step is performed after all other descriptor information |
| * has been filled out so that, if the controller already happens to be |
| * pointing at this descriptor, it will not run (via the "owned by |
| * hardware" bit) until all other descriptor has been set up. |
| */ |
| |
| desc->descriptor_control = |
| ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) | |
| (generate_eop ? |
| ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) | |
| (read_fixed ? |
| ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) | |
| (write_fixed_or_sop ? |
| ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) | |
| (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0) |
| ); |
| } |
| |
| static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev, |
| volatile struct alt_sgdma_descriptor *desc) |
| { |
| unsigned int status; |
| int counter = 0; |
| |
| /* Wait for any pending transfers to complete */ |
| alt_sgdma_print_desc(desc); |
| status = dev->status; |
| |
| counter = 0; |
| while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| break; |
| } |
| |
| if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| debug("Timeout waiting sgdma in do sync!\n"); |
| |
| /* |
| * Clear any (previous) status register information |
| * that might occlude our error checking later. |
| */ |
| dev->status = 0xFF; |
| |
| /* Point the controller at the descriptor */ |
| dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; |
| debug("next desc in sgdma 0x%x\n", |
| (unsigned int)dev->next_descriptor_pointer); |
| |
| /* |
| * Set up SGDMA controller to: |
| * - Disable interrupt generation |
| * - Run once a valid descriptor is written to controller |
| * - Stop on an error with any particular descriptor |
| */ |
| dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | |
| ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); |
| |
| /* Wait for the descriptor (chain) to complete */ |
| status = dev->status; |
| debug("wait for sgdma...."); |
| while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) |
| ; |
| debug("done\n"); |
| |
| /* Clear Run */ |
| dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK)); |
| |
| /* Get & clear status register contents */ |
| status = dev->status; |
| dev->status = 0xFF; |
| |
| /* we really should check if the transfer completes properly */ |
| debug("tx sgdma status = 0x%x", status); |
| return 0; |
| } |
| |
| static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev, |
| volatile struct alt_sgdma_descriptor *desc) |
| { |
| unsigned int status; |
| int counter = 0; |
| |
| /* Wait for any pending transfers to complete */ |
| alt_sgdma_print_desc(desc); |
| status = dev->status; |
| |
| counter = 0; |
| while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| break; |
| } |
| |
| if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| debug("Timeout waiting sgdma in do async!\n"); |
| |
| /* |
| * Clear the RUN bit in the control register. This is needed |
| * to restart the SGDMA engine later on. |
| */ |
| dev->control = 0; |
| |
| /* |
| * Clear any (previous) status register information |
| * that might occlude our error checking later. |
| */ |
| dev->status = 0xFF; |
| |
| /* Point the controller at the descriptor */ |
| dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF; |
| |
| /* |
| * Set up SGDMA controller to: |
| * - Disable interrupt generation |
| * - Run once a valid descriptor is written to controller |
| * - Stop on an error with any particular descriptor |
| */ |
| dev->control = (ALT_SGDMA_CONTROL_RUN_MSK | |
| ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK); |
| |
| /* we really should check if the transfer completes properly */ |
| return 0; |
| } |
| |
| /* u-boot interface */ |
| static int tse_adjust_link(struct altera_tse_priv *priv) |
| { |
| unsigned int refvar; |
| |
| refvar = priv->mac_dev->command_config.image; |
| |
| if (!(priv->duplexity)) |
| refvar |= ALTERA_TSE_CMD_HD_ENA_MSK; |
| else |
| refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK; |
| |
| switch (priv->speed) { |
| case 1000: |
| refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK; |
| refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK; |
| break; |
| case 100: |
| refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK; |
| refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK; |
| break; |
| case 10: |
| refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK; |
| refvar |= ALTERA_TSE_CMD_ENA_10_MSK; |
| break; |
| } |
| priv->mac_dev->command_config.image = refvar; |
| |
| return 0; |
| } |
| |
| static int tse_eth_send(struct eth_device *dev, void *packet, int length) |
| { |
| struct altera_tse_priv *priv = dev->priv; |
| volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; |
| volatile struct alt_sgdma_descriptor *tx_desc = |
| (volatile struct alt_sgdma_descriptor *)priv->tx_desc; |
| |
| volatile struct alt_sgdma_descriptor *tx_desc_cur = |
| (volatile struct alt_sgdma_descriptor *)&tx_desc[0]; |
| |
| flush_dcache_range((unsigned long)packet, |
| (unsigned long)packet + length); |
| alt_sgdma_construct_descriptor_burst( |
| (volatile struct alt_sgdma_descriptor *)&tx_desc[0], |
| (volatile struct alt_sgdma_descriptor *)&tx_desc[1], |
| (unsigned int *)packet, /* read addr */ |
| (unsigned int *)0, |
| length, /* length or EOP ,will change for each tx */ |
| 0x1, /* gen eop */ |
| 0x0, /* read fixed */ |
| 0x1, /* write fixed or sop */ |
| 0x0, /* read burst */ |
| 0x0, /* write burst */ |
| 0x0 /* channel */ |
| ); |
| debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length); |
| |
| /* send the packet */ |
| debug("sending packet\n"); |
| alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur); |
| debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred); |
| return tx_desc_cur->actual_bytes_transferred; |
| } |
| |
| static int tse_eth_rx(struct eth_device *dev) |
| { |
| int packet_length = 0; |
| struct altera_tse_priv *priv = dev->priv; |
| volatile struct alt_sgdma_descriptor *rx_desc = |
| (volatile struct alt_sgdma_descriptor *)priv->rx_desc; |
| volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0]; |
| |
| if (rx_desc_cur->descriptor_status & |
| ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) { |
| debug("got packet\n"); |
| packet_length = rx_desc->actual_bytes_transferred; |
| NetReceive(NetRxPackets[0], packet_length); |
| |
| /* start descriptor again */ |
| flush_dcache_range((unsigned long)(NetRxPackets[0]), |
| (unsigned long)(NetRxPackets[0]) + PKTSIZE_ALIGN); |
| alt_sgdma_construct_descriptor_burst( |
| (volatile struct alt_sgdma_descriptor *)&rx_desc[0], |
| (volatile struct alt_sgdma_descriptor *)&rx_desc[1], |
| (unsigned int)0x0, /* read addr */ |
| (unsigned int *)NetRxPackets[0], |
| 0x0, /* length or EOP */ |
| 0x0, /* gen eop */ |
| 0x0, /* read fixed */ |
| 0x0, /* write fixed or sop */ |
| 0x0, /* read burst */ |
| 0x0, /* write burst */ |
| 0x0 /* channel */ |
| ); |
| |
| /* setup the sgdma */ |
| alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]); |
| |
| return packet_length; |
| } |
| |
| return -1; |
| } |
| |
| static void tse_eth_halt(struct eth_device *dev) |
| { |
| /* don't do anything! */ |
| /* this gets called after each uboot */ |
| /* network command. don't need to reset the thing all of the time */ |
| } |
| |
| static void tse_eth_reset(struct eth_device *dev) |
| { |
| /* stop sgdmas, disable tse receive */ |
| struct altera_tse_priv *priv = dev->priv; |
| volatile struct alt_tse_mac *mac_dev = priv->mac_dev; |
| volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx; |
| volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx; |
| int counter; |
| volatile struct alt_sgdma_descriptor *rx_desc = |
| (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0]; |
| |
| /* clear rx desc & wait for sgdma to complete */ |
| rx_desc->descriptor_control = 0; |
| rx_sgdma->control = 0; |
| counter = 0; |
| while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| break; |
| } |
| |
| if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { |
| debug("Timeout waiting for rx sgdma!\n"); |
| rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
| rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
| } |
| |
| counter = 0; |
| tx_sgdma->control = 0; |
| while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) { |
| if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) |
| break; |
| } |
| |
| if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) { |
| debug("Timeout waiting for tx sgdma!\n"); |
| tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
| tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK; |
| } |
| /* reset the mac */ |
| mac_dev->command_config.bits.transmit_enable = 1; |
| mac_dev->command_config.bits.receive_enable = 1; |
| mac_dev->command_config.bits.software_reset = 1; |
| |
| counter = 0; |
| while (mac_dev->command_config.bits.software_reset) { |
| if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR) |
| break; |
| } |
| |
| if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR) |
| debug("TSEMAC SW reset bit never cleared!\n"); |
| } |
| |
| static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum) |
| { |
| volatile struct alt_tse_mac *mac_dev; |
| unsigned int *mdio_regs; |
| unsigned int data; |
| u16 value; |
| |
| mac_dev = priv->mac_dev; |
| |
| /* set mdio address */ |
| mac_dev->mdio_phy1_addr = priv->phyaddr; |
| mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; |
| |
| /* get the data */ |
| data = mdio_regs[regnum]; |
| |
| value = data & 0xffff; |
| |
| return value; |
| } |
| |
| static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum, |
| unsigned int value) |
| { |
| volatile struct alt_tse_mac *mac_dev; |
| unsigned int *mdio_regs; |
| unsigned int data; |
| |
| mac_dev = priv->mac_dev; |
| |
| /* set mdio address */ |
| mac_dev->mdio_phy1_addr = priv->phyaddr; |
| mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; |
| |
| /* get the data */ |
| data = (unsigned int)value; |
| |
| mdio_regs[regnum] = data; |
| |
| return 0; |
| } |
| |
| /* MDIO access to phy */ |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) |
| static int altera_tse_miiphy_write(const char *devname, unsigned char addr, |
| unsigned char reg, unsigned short value) |
| { |
| struct eth_device *dev; |
| struct altera_tse_priv *priv; |
| dev = eth_get_dev_by_name(devname); |
| priv = dev->priv; |
| |
| tse_mdio_write(priv, (uint) reg, (uint) value); |
| |
| return 0; |
| } |
| |
| static int altera_tse_miiphy_read(const char *devname, unsigned char addr, |
| unsigned char reg, unsigned short *value) |
| { |
| struct eth_device *dev; |
| struct altera_tse_priv *priv; |
| volatile struct alt_tse_mac *mac_dev; |
| unsigned int *mdio_regs; |
| |
| dev = eth_get_dev_by_name(devname); |
| priv = dev->priv; |
| |
| mac_dev = priv->mac_dev; |
| mac_dev->mdio_phy1_addr = (int)addr; |
| mdio_regs = (unsigned int *)&mac_dev->mdio_phy1; |
| |
| *value = 0xffff & mdio_regs[reg]; |
| |
| return 0; |
| |
| } |
| #endif |
| |
| /* |
| * Also copied from tsec.c |
| */ |
| /* Parse the status register for link, and then do |
| * auto-negotiation |
| */ |
| static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv) |
| { |
| /* |
| * Wait if the link is up, and autonegotiation is in progress |
| * (ie - we're capable and it's not done) |
| */ |
| mii_reg = tse_mdio_read(priv, MIIM_STATUS); |
| |
| if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE) |
| && !(mii_reg & BMSR_ANEGCOMPLETE)) { |
| int i = 0; |
| |
| puts("Waiting for PHY auto negotiation to complete"); |
| while (!(mii_reg & BMSR_ANEGCOMPLETE)) { |
| /* |
| * Timeout reached ? |
| */ |
| if (i > PHY_AUTONEGOTIATE_TIMEOUT) { |
| puts(" TIMEOUT !\n"); |
| priv->link = 0; |
| return 0; |
| } |
| |
| if ((i++ % 1000) == 0) |
| putc('.'); |
| udelay(1000); /* 1 ms */ |
| mii_reg = tse_mdio_read(priv, MIIM_STATUS); |
| } |
| puts(" done\n"); |
| priv->link = 1; |
| udelay(500000); /* another 500 ms (results in faster booting) */ |
| } else { |
| if (mii_reg & MIIM_STATUS_LINK) { |
| debug("Link is up\n"); |
| priv->link = 1; |
| } else { |
| debug("Link is down\n"); |
| priv->link = 0; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* Parse the 88E1011's status register for speed and duplex |
| * information |
| */ |
| static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv) |
| { |
| uint speed; |
| |
| mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); |
| |
| if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) && |
| !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { |
| int i = 0; |
| |
| puts("Waiting for PHY realtime link"); |
| while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) { |
| /* Timeout reached ? */ |
| if (i > PHY_AUTONEGOTIATE_TIMEOUT) { |
| puts(" TIMEOUT !\n"); |
| priv->link = 0; |
| break; |
| } |
| |
| if ((i++ == 1000) == 0) { |
| i = 0; |
| puts("."); |
| } |
| udelay(1000); /* 1 ms */ |
| mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS); |
| } |
| puts(" done\n"); |
| udelay(500000); /* another 500 ms (results in faster booting) */ |
| } else { |
| if (mii_reg & MIIM_88E1011_PHYSTAT_LINK) |
| priv->link = 1; |
| else |
| priv->link = 0; |
| } |
| |
| if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX) |
| priv->duplexity = 1; |
| else |
| priv->duplexity = 0; |
| |
| speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED); |
| |
| switch (speed) { |
| case MIIM_88E1011_PHYSTAT_GBIT: |
| priv->speed = 1000; |
| debug("PHY Speed is 1000Mbit\n"); |
| break; |
| case MIIM_88E1011_PHYSTAT_100: |
| debug("PHY Speed is 100Mbit\n"); |
| priv->speed = 100; |
| break; |
| default: |
| debug("PHY Speed is 10Mbit\n"); |
| priv->speed = 10; |
| } |
| |
| return 0; |
| } |
| |
| static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv) |
| { |
| uint mii_data = tse_mdio_read(priv, mii_reg); |
| mii_data &= 0xfff0; |
| if ((priv->flags >= 1) && (priv->flags <= 4)) |
| mii_data |= 0xb; |
| else if (priv->flags == 5) |
| mii_data |= 0x4; |
| |
| return mii_data; |
| } |
| |
| static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv) |
| { |
| uint mii_data = tse_mdio_read(priv, mii_reg); |
| mii_data &= ~0x82; |
| if ((priv->flags >= 1) && (priv->flags <= 4)) |
| mii_data |= 0x82; |
| |
| return mii_data; |
| } |
| |
| /* |
| * Returns which value to write to the control register. |
| * For 10/100, the value is slightly different |
| */ |
| static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv) |
| { |
| return MIIM_CONTROL_INIT; |
| } |
| |
| /* |
| * PHY & MDIO code |
| * Need to add SGMII stuff |
| * |
| */ |
| |
| static struct phy_info phy_info_M88E1111S = { |
| 0x01410cc, |
| "Marvell 88E1111S", |
| 4, |
| (struct phy_cmd[]){ /* config */ |
| /* Reset and configure the PHY */ |
| {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, |
| {MIIM_88E1111_PHY_EXT_SR, 0x848f, |
| &mii_m88e1111s_setmode_sr}, |
| /* Delay RGMII TX and RX */ |
| {MIIM_88E1111_PHY_EXT_CR, 0x0cd2, |
| &mii_m88e1111s_setmode_cr}, |
| {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL}, |
| {MIIM_ANAR, MIIM_ANAR_INIT, NULL}, |
| {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL}, |
| {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init}, |
| {miim_end,} |
| }, |
| (struct phy_cmd[]){ /* startup */ |
| /* Status is read once to clear old link state */ |
| {MIIM_STATUS, miim_read, NULL}, |
| /* Auto-negotiate */ |
| {MIIM_STATUS, miim_read, &mii_parse_sr}, |
| /* Read the status */ |
| {MIIM_88E1011_PHY_STATUS, miim_read, |
| &mii_parse_88E1011_psr}, |
| {miim_end,} |
| }, |
| (struct phy_cmd[]){ /* shutdown */ |
| {miim_end,} |
| }, |
| }; |
| |
| /* a generic flavor. */ |
| static struct phy_info phy_info_generic = { |
| 0, |
| "Unknown/Generic PHY", |
| 32, |
| (struct phy_cmd[]){ /* config */ |
| {MII_BMCR, BMCR_RESET, NULL}, |
| {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL}, |
| {miim_end,} |
| }, |
| (struct phy_cmd[]){ /* startup */ |
| {MII_BMSR, miim_read, NULL}, |
| {MII_BMSR, miim_read, &mii_parse_sr}, |
| {miim_end,} |
| }, |
| (struct phy_cmd[]){ /* shutdown */ |
| {miim_end,} |
| } |
| }; |
| |
| static struct phy_info *phy_info[] = { |
| &phy_info_M88E1111S, |
| NULL |
| }; |
| |
| /* Grab the identifier of the device's PHY, and search through |
| * all of the known PHYs to see if one matches. If so, return |
| * it, if not, return NULL |
| */ |
| static struct phy_info *get_phy_info(struct eth_device *dev) |
| { |
| struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; |
| uint phy_reg, phy_ID; |
| int i; |
| struct phy_info *theInfo = NULL; |
| |
| /* Grab the bits from PHYIR1, and put them in the upper half */ |
| phy_reg = tse_mdio_read(priv, MIIM_PHYIR1); |
| phy_ID = (phy_reg & 0xffff) << 16; |
| |
| /* Grab the bits from PHYIR2, and put them in the lower half */ |
| phy_reg = tse_mdio_read(priv, MIIM_PHYIR2); |
| phy_ID |= (phy_reg & 0xffff); |
| |
| /* loop through all the known PHY types, and find one that */ |
| /* matches the ID we read from the PHY. */ |
| for (i = 0; phy_info[i]; i++) { |
| if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) { |
| theInfo = phy_info[i]; |
| break; |
| } |
| } |
| |
| if (theInfo == NULL) { |
| theInfo = &phy_info_generic; |
| debug("%s: No support for PHY id %x; assuming generic\n", |
| dev->name, phy_ID); |
| } else |
| debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID); |
| |
| return theInfo; |
| } |
| |
| /* Execute the given series of commands on the given device's |
| * PHY, running functions as necessary |
| */ |
| static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd) |
| { |
| int i; |
| uint result; |
| |
| for (i = 0; cmd->mii_reg != miim_end; i++) { |
| if (cmd->mii_data == miim_read) { |
| result = tse_mdio_read(priv, cmd->mii_reg); |
| |
| if (cmd->funct != NULL) |
| (*(cmd->funct)) (result, priv); |
| |
| } else { |
| if (cmd->funct != NULL) |
| result = (*(cmd->funct)) (cmd->mii_reg, priv); |
| else |
| result = cmd->mii_data; |
| |
| tse_mdio_write(priv, cmd->mii_reg, result); |
| |
| } |
| cmd++; |
| } |
| } |
| |
| /* Phy init code */ |
| static int init_phy(struct eth_device *dev) |
| { |
| struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv; |
| struct phy_info *curphy; |
| |
| /* Get the cmd structure corresponding to the attached |
| * PHY */ |
| curphy = get_phy_info(dev); |
| |
| if (curphy == NULL) { |
| priv->phyinfo = NULL; |
| debug("%s: No PHY found\n", dev->name); |
| |
| return 0; |
| } else |
| debug("%s found\n", curphy->name); |
| priv->phyinfo = curphy; |
| |
| phy_run_commands(priv, priv->phyinfo->config); |
| |
| return 1; |
| } |
| |
| static int tse_set_mac_address(struct eth_device *dev) |
| { |
| struct altera_tse_priv *priv = dev->priv; |
| volatile struct alt_tse_mac *mac_dev = priv->mac_dev; |
| |
| debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n", |
| dev->enetaddr[5], dev->enetaddr[4], |
| dev->enetaddr[3], dev->enetaddr[2], |
| dev->enetaddr[1], dev->enetaddr[0]); |
| mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 | |
| (dev->enetaddr[2]) << 16 | |
| (dev->enetaddr[1]) << 8 | (dev->enetaddr[0])); |
| |
| mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 | |
| (dev->enetaddr[4])) & 0xFFFF); |
| |
| /* Set the MAC address */ |
| mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0; |
| mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1; |
| |
| /* Set the MAC address */ |
| mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0; |
| mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1; |
| |
| /* Set the MAC address */ |
| mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0; |
| mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1; |
| |
| /* Set the MAC address */ |
| mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0; |
| mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1; |
| return 0; |
| } |
| |
| static int tse_eth_init(struct eth_device *dev, bd_t * bd) |
| { |
| int dat; |
| struct altera_tse_priv *priv = dev->priv; |
| volatile struct alt_tse_mac *mac_dev = priv->mac_dev; |
| volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc; |
| volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc; |
| volatile struct alt_sgdma_descriptor *rx_desc_cur = |
| (volatile struct alt_sgdma_descriptor *)&rx_desc[0]; |
| |
| /* stop controller */ |
| debug("Reseting TSE & SGDMAs\n"); |
| tse_eth_reset(dev); |
| |
| /* start the phy */ |
| debug("Configuring PHY\n"); |
| phy_run_commands(priv, priv->phyinfo->startup); |
| |
| /* need to create sgdma */ |
| debug("Configuring tx desc\n"); |
| alt_sgdma_construct_descriptor_burst( |
| (volatile struct alt_sgdma_descriptor *)&tx_desc[0], |
| (volatile struct alt_sgdma_descriptor *)&tx_desc[1], |
| (unsigned int *)NULL, /* read addr */ |
| (unsigned int *)0, |
| 0, /* length or EOP ,will change for each tx */ |
| 0x1, /* gen eop */ |
| 0x0, /* read fixed */ |
| 0x1, /* write fixed or sop */ |
| 0x0, /* read burst */ |
| 0x0, /* write burst */ |
| 0x0 /* channel */ |
| ); |
| debug("Configuring rx desc\n"); |
| flush_dcache_range((unsigned long)(NetRxPackets[0]), |
| (unsigned long)(NetRxPackets[0]) + PKTSIZE_ALIGN); |
| alt_sgdma_construct_descriptor_burst( |
| (volatile struct alt_sgdma_descriptor *)&rx_desc[0], |
| (volatile struct alt_sgdma_descriptor *)&rx_desc[1], |
| (unsigned int)0x0, /* read addr */ |
| (unsigned int *)NetRxPackets[0], |
| 0x0, /* length or EOP */ |
| 0x0, /* gen eop */ |
| 0x0, /* read fixed */ |
| 0x0, /* write fixed or sop */ |
| 0x0, /* read burst */ |
| 0x0, /* write burst */ |
| 0x0 /* channel */ |
| ); |
| /* start rx async transfer */ |
| debug("Starting rx sgdma\n"); |
| alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur); |
| |
| /* start TSE */ |
| debug("Configuring TSE Mac\n"); |
| /* Initialize MAC registers */ |
| mac_dev->max_frame_length = PKTSIZE_ALIGN; |
| mac_dev->rx_almost_empty_threshold = 8; |
| mac_dev->rx_almost_full_threshold = 8; |
| mac_dev->tx_almost_empty_threshold = 8; |
| mac_dev->tx_almost_full_threshold = 3; |
| mac_dev->tx_sel_empty_threshold = |
| CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; |
| mac_dev->tx_sel_full_threshold = 0; |
| mac_dev->rx_sel_empty_threshold = |
| CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16; |
| mac_dev->rx_sel_full_threshold = 0; |
| |
| /* NO Shift */ |
| mac_dev->rx_cmd_stat.bits.rx_shift16 = 0; |
| mac_dev->tx_cmd_stat.bits.tx_shift16 = 0; |
| |
| /* enable MAC */ |
| dat = 0; |
| dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK; |
| |
| mac_dev->command_config.image = dat; |
| |
| /* configure the TSE core */ |
| /* -- output clocks, */ |
| /* -- and later config stuff for SGMII */ |
| if (priv->link) { |
| debug("Adjusting TSE to link speed\n"); |
| tse_adjust_link(priv); |
| } |
| |
| return priv->link ? 0 : -1; |
| } |
| |
| /* TSE init code */ |
| int altera_tse_initialize(u8 dev_num, int mac_base, |
| int sgdma_rx_base, int sgdma_tx_base, |
| u32 sgdma_desc_base, u32 sgdma_desc_size) |
| { |
| struct altera_tse_priv *priv; |
| struct eth_device *dev; |
| struct alt_sgdma_descriptor *rx_desc; |
| struct alt_sgdma_descriptor *tx_desc; |
| unsigned long dma_handle; |
| |
| dev = (struct eth_device *)malloc(sizeof *dev); |
| |
| if (NULL == dev) |
| return 0; |
| |
| memset(dev, 0, sizeof *dev); |
| |
| priv = malloc(sizeof(*priv)); |
| |
| if (!priv) { |
| free(dev); |
| return 0; |
| } |
| if (sgdma_desc_size) { |
| if (sgdma_desc_size < (sizeof(*tx_desc) * (3 + PKTBUFSRX))) { |
| printf("ALTERA_TSE-%hu: " |
| "descriptor memory is too small\n", dev_num); |
| free(priv); |
| free(dev); |
| return 0; |
| } |
| tx_desc = (struct alt_sgdma_descriptor *)sgdma_desc_base; |
| } else { |
| tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX), |
| &dma_handle); |
| } |
| |
| rx_desc = tx_desc + 2; |
| debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc); |
| debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc); |
| |
| if (!tx_desc) { |
| free(priv); |
| free(dev); |
| return 0; |
| } |
| memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1)); |
| memset(tx_desc, 0, (sizeof *tx_desc) * 2); |
| |
| /* initialize tse priv */ |
| priv->mac_dev = (volatile struct alt_tse_mac *)mac_base; |
| priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base; |
| priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base; |
| priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR; |
| priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS; |
| priv->rx_desc = rx_desc; |
| priv->tx_desc = tx_desc; |
| |
| /* init eth structure */ |
| dev->priv = priv; |
| dev->init = tse_eth_init; |
| dev->halt = tse_eth_halt; |
| dev->send = tse_eth_send; |
| dev->recv = tse_eth_rx; |
| dev->write_hwaddr = tse_set_mac_address; |
| sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num); |
| |
| eth_register(dev); |
| |
| #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII) |
| miiphy_register(dev->name, altera_tse_miiphy_read, |
| altera_tse_miiphy_write); |
| #endif |
| |
| init_phy(dev); |
| |
| return 1; |
| } |