| /* |
| * Copyright (C) 2013 Bo Shen <voice.shen@atmel.com> |
| * |
| * Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de) |
| * |
| * Copyright (C) 2005 HP Labs |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <config.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <asm/io.h> |
| #include <linux/sizes.h> |
| #include <asm/gpio.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/arch/at91_pio.h> |
| |
| #define GPIO_PER_BANK 32 |
| |
| static struct at91_port *at91_pio_get_port(unsigned port) |
| { |
| switch (port) { |
| case AT91_PIO_PORTA: |
| return (struct at91_port *)ATMEL_BASE_PIOA; |
| case AT91_PIO_PORTB: |
| return (struct at91_port *)ATMEL_BASE_PIOB; |
| case AT91_PIO_PORTC: |
| return (struct at91_port *)ATMEL_BASE_PIOC; |
| #if (ATMEL_PIO_PORTS > 3) |
| case AT91_PIO_PORTD: |
| return (struct at91_port *)ATMEL_BASE_PIOD; |
| #if (ATMEL_PIO_PORTS > 4) |
| case AT91_PIO_PORTE: |
| return (struct at91_port *)ATMEL_BASE_PIOE; |
| #endif |
| #endif |
| default: |
| printf("Error: at91_gpio: Fail to get PIO base!\n"); |
| return NULL; |
| } |
| } |
| |
| static void at91_set_port_pullup(struct at91_port *at91_port, unsigned offset, |
| int use_pullup) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| if (use_pullup) |
| writel(mask, &at91_port->puer); |
| else |
| writel(mask, &at91_port->pudr); |
| writel(mask, &at91_port->per); |
| } |
| |
| int at91_set_pio_pullup(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_pullup(at91_port, pin, use_pullup); |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "GPIO" peripheral role. |
| */ |
| int at91_set_pio_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(mask, &at91_port->per); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "A" internal peripheral role. |
| */ |
| int at91_set_a_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| #if defined(CPU_HAS_PIO3) |
| writel(readl(&at91_port->abcdsr1) & ~mask, |
| &at91_port->abcdsr1); |
| writel(readl(&at91_port->abcdsr2) & ~mask, |
| &at91_port->abcdsr2); |
| #else |
| writel(mask, &at91_port->asr); |
| #endif |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "B" internal peripheral role. |
| */ |
| int at91_set_b_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| #if defined(CPU_HAS_PIO3) |
| writel(readl(&at91_port->abcdsr1) | mask, |
| &at91_port->abcdsr1); |
| writel(readl(&at91_port->abcdsr2) & ~mask, |
| &at91_port->abcdsr2); |
| #else |
| writel(mask, &at91_port->bsr); |
| #endif |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| #if defined(CPU_HAS_PIO3) |
| /* |
| * mux the pin to the "C" internal peripheral role. |
| */ |
| int at91_set_c_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(readl(&at91_port->abcdsr1) & ~mask, |
| &at91_port->abcdsr1); |
| writel(readl(&at91_port->abcdsr2) | mask, |
| &at91_port->abcdsr2); |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * mux the pin to the "D" internal peripheral role. |
| */ |
| int at91_set_d_periph(unsigned port, unsigned pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->idr); |
| at91_set_pio_pullup(port, pin, use_pullup); |
| writel(readl(&at91_port->abcdsr1) | mask, |
| &at91_port->abcdsr1); |
| writel(readl(&at91_port->abcdsr2) | mask, |
| &at91_port->abcdsr2); |
| writel(mask, &at91_port->pdr); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_DM_GPIO |
| static bool at91_get_port_output(struct at91_port *at91_port, int offset) |
| { |
| u32 mask, val; |
| |
| mask = 1 << offset; |
| val = readl(&at91_port->osr); |
| return val & mask; |
| } |
| #endif |
| |
| static void at91_set_port_input(struct at91_port *at91_port, int offset, |
| int use_pullup) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| writel(mask, &at91_port->idr); |
| at91_set_port_pullup(at91_port, offset, use_pullup); |
| writel(mask, &at91_port->odr); |
| writel(mask, &at91_port->per); |
| } |
| |
| /* |
| * mux the pin to the gpio controller (instead of "A" or "B" peripheral), and |
| * configure it for an input. |
| */ |
| int at91_set_pio_input(unsigned port, u32 pin, int use_pullup) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_input(at91_port, pin, use_pullup); |
| |
| return 0; |
| } |
| |
| static void at91_set_port_output(struct at91_port *at91_port, int offset, |
| int value) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| writel(mask, &at91_port->idr); |
| writel(mask, &at91_port->pudr); |
| if (value) |
| writel(mask, &at91_port->sodr); |
| else |
| writel(mask, &at91_port->codr); |
| writel(mask, &at91_port->oer); |
| writel(mask, &at91_port->per); |
| } |
| |
| /* |
| * mux the pin to the gpio controller (instead of "A" or "B" peripheral), |
| * and configure it for an output. |
| */ |
| int at91_set_pio_output(unsigned port, u32 pin, int value) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_output(at91_port, pin, value); |
| |
| return 0; |
| } |
| |
| /* |
| * enable/disable the glitch filter. mostly used with IRQ handling. |
| */ |
| int at91_set_pio_deglitch(unsigned port, unsigned pin, int is_on) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) { |
| #if defined(CPU_HAS_PIO3) |
| writel(mask, &at91_port->ifscdr); |
| #endif |
| writel(mask, &at91_port->ifer); |
| } else { |
| writel(mask, &at91_port->ifdr); |
| } |
| } |
| |
| return 0; |
| } |
| |
| #if defined(CPU_HAS_PIO3) |
| /* |
| * enable/disable the debounce filter. |
| */ |
| int at91_set_pio_debounce(unsigned port, unsigned pin, int is_on, int div) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) { |
| writel(mask, &at91_port->ifscer); |
| writel(div & PIO_SCDR_DIV, &at91_port->scdr); |
| writel(mask, &at91_port->ifer); |
| } else { |
| writel(mask, &at91_port->ifdr); |
| } |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * enable/disable the pull-down. |
| * If pull-up already enabled while calling the function, we disable it. |
| */ |
| int at91_set_pio_pulldown(unsigned port, unsigned pin, int is_on) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(mask, &at91_port->pudr); |
| if (is_on) |
| writel(mask, &at91_port->ppder); |
| else |
| writel(mask, &at91_port->ppddr); |
| } |
| |
| return 0; |
| } |
| |
| /* |
| * disable Schmitt trigger |
| */ |
| int at91_set_pio_disable_schmitt_trig(unsigned port, unsigned pin) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| writel(readl(&at91_port->schmitt) | mask, |
| &at91_port->schmitt); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| /* |
| * enable/disable the multi-driver. This is only valid for output and |
| * allows the output pin to run as an open collector output. |
| */ |
| int at91_set_pio_multi_drive(unsigned port, unsigned pin, int is_on) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| u32 mask; |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) { |
| mask = 1 << pin; |
| if (is_on) |
| writel(mask, &at91_port->mder); |
| else |
| writel(mask, &at91_port->mddr); |
| } |
| |
| return 0; |
| } |
| |
| static void at91_set_port_value(struct at91_port *at91_port, int offset, |
| int value) |
| { |
| u32 mask; |
| |
| mask = 1 << offset; |
| if (value) |
| writel(mask, &at91_port->sodr); |
| else |
| writel(mask, &at91_port->codr); |
| } |
| |
| /* |
| * assuming the pin is muxed as a gpio output, set its value. |
| */ |
| int at91_set_pio_value(unsigned port, unsigned pin, int value) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| at91_set_port_value(at91_port, pin, value); |
| |
| return 0; |
| } |
| |
| static int at91_get_port_value(struct at91_port *at91_port, int offset) |
| { |
| u32 pdsr = 0, mask; |
| |
| mask = 1 << offset; |
| pdsr = readl(&at91_port->pdsr) & mask; |
| |
| return pdsr != 0; |
| } |
| /* |
| * read the pin's value (works even if it's not muxed as a gpio). |
| */ |
| int at91_get_pio_value(unsigned port, unsigned pin) |
| { |
| struct at91_port *at91_port = at91_pio_get_port(port); |
| |
| if (at91_port && (pin < GPIO_PER_BANK)) |
| return at91_get_port_value(at91_port, pin); |
| |
| return 0; |
| } |
| |
| #ifndef CONFIG_DM_GPIO |
| /* Common GPIO API */ |
| |
| int gpio_request(unsigned gpio, const char *label) |
| { |
| return 0; |
| } |
| |
| int gpio_free(unsigned gpio) |
| { |
| return 0; |
| } |
| |
| int gpio_direction_input(unsigned gpio) |
| { |
| at91_set_pio_input(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio), 0); |
| return 0; |
| } |
| |
| int gpio_direction_output(unsigned gpio, int value) |
| { |
| at91_set_pio_output(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio), value); |
| return 0; |
| } |
| |
| int gpio_get_value(unsigned gpio) |
| { |
| return at91_get_pio_value(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio)); |
| } |
| |
| int gpio_set_value(unsigned gpio, int value) |
| { |
| at91_set_pio_value(at91_gpio_to_port(gpio), |
| at91_gpio_to_pin(gpio), value); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_DM_GPIO |
| |
| struct at91_port_priv { |
| struct at91_port *regs; |
| }; |
| |
| /* set GPIO pin 'gpio' as an input */ |
| static int at91_gpio_direction_input(struct udevice *dev, unsigned offset) |
| { |
| struct at91_port_priv *port = dev_get_platdata(dev); |
| |
| at91_set_port_input(port->regs, offset, 0); |
| |
| return 0; |
| } |
| |
| /* set GPIO pin 'gpio' as an output, with polarity 'value' */ |
| static int at91_gpio_direction_output(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct at91_port_priv *port = dev_get_platdata(dev); |
| |
| at91_set_port_output(port->regs, offset, value); |
| |
| return 0; |
| } |
| |
| /* read GPIO IN value of pin 'gpio' */ |
| static int at91_gpio_get_value(struct udevice *dev, unsigned offset) |
| { |
| struct at91_port_priv *port = dev_get_platdata(dev); |
| |
| return at91_get_port_value(port->regs, offset); |
| } |
| |
| /* write GPIO OUT value to pin 'gpio' */ |
| static int at91_gpio_set_value(struct udevice *dev, unsigned offset, |
| int value) |
| { |
| struct at91_port_priv *port = dev_get_platdata(dev); |
| |
| at91_set_port_value(port->regs, offset, value); |
| |
| return 0; |
| } |
| |
| static int at91_gpio_get_function(struct udevice *dev, unsigned offset) |
| { |
| struct at91_port_priv *port = dev_get_platdata(dev); |
| |
| /* GPIOF_FUNC is not implemented yet */ |
| if (at91_get_port_output(port->regs, offset)) |
| return GPIOF_OUTPUT; |
| else |
| return GPIOF_INPUT; |
| } |
| |
| static const struct dm_gpio_ops gpio_at91_ops = { |
| .direction_input = at91_gpio_direction_input, |
| .direction_output = at91_gpio_direction_output, |
| .get_value = at91_gpio_get_value, |
| .set_value = at91_gpio_set_value, |
| .get_function = at91_gpio_get_function, |
| }; |
| |
| static int at91_gpio_probe(struct udevice *dev) |
| { |
| struct at91_port_priv *port = dev_get_priv(dev); |
| struct at91_port_platdata *plat = dev_get_platdata(dev); |
| struct gpio_dev_priv *uc_priv = dev->uclass_priv; |
| |
| uc_priv->bank_name = plat->bank_name; |
| uc_priv->gpio_count = GPIO_PER_BANK; |
| port->regs = (struct at91_port *)plat->base_addr; |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(gpio_at91) = { |
| .name = "gpio_at91", |
| .id = UCLASS_GPIO, |
| .ops = &gpio_at91_ops, |
| .probe = at91_gpio_probe, |
| .priv_auto_alloc_size = sizeof(struct at91_port_priv), |
| }; |
| #endif |