board/gdsys/405ep/iocon.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2010
  * Dirk Eibach,  Guntermann & Drunck GmbH, eibach@gdsys.de
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <command.h>
 #include <errno.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <asm/ppc4xx-gpio.h>

 #include "405ep.h"
 #include <gdsys_fpga.h>

 #include "../common/osd.h"
 #include "../common/mclink.h"

 #include <i2c.h>
 #include <pca953x.h>
 #include <pca9698.h>

 #include <miiphy.h>

 DECLARE_GLOBAL_DATA_PTR;

 #define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
 #define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
 #define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)

 #define MAX_MUX_CHANNELS 2

 enum {
 	UNITTYPE_MAIN_SERVER = 0,
 	UNITTYPE_MAIN_USER = 1,
 	UNITTYPE_VIDEO_SERVER = 2,
 	UNITTYPE_VIDEO_USER = 3,
 };

 enum {
 	HWVER_100 = 0,
 	HWVER_104 = 1,
 	HWVER_110 = 2,
 	HWVER_120 = 3,
 	HWVER_200 = 4,
 	HWVER_210 = 5,
 	HWVER_220 = 6,
 	HWVER_230 = 7,
 };

 enum {
 	FPGA_HWVER_200 = 0,
 	FPGA_HWVER_210 = 1,
 };

 enum {
 	COMPRESSION_NONE = 0,
 	COMPRESSION_TYPE1_DELTA = 1,
 	COMPRESSION_TYPE1_TYPE2_DELTA = 3,
 };

 enum {
 	AUDIO_NONE = 0,
 	AUDIO_TX = 1,
 	AUDIO_RX = 2,
 	AUDIO_RXTX = 3,
 };

 enum {
 	SYSCLK_147456 = 0,
 };

 enum {
 	RAM_DDR2_32 = 0,
 	RAM_DDR3_32 = 1,
 };

 enum {
 	CARRIER_SPEED_1G = 0,
 	CARRIER_SPEED_2_5G = 1,
 };

 enum {
 	MCFPGA_DONE = 1 << 0,
 	MCFPGA_INIT_N = 1 << 1,
 	MCFPGA_PROGRAM_N = 1 << 2,
 	MCFPGA_UPDATE_ENABLE_N = 1 << 3,
 	MCFPGA_RESET_N = 1 << 4,
 };

 enum {
 	GPIO_MDC = 1 << 14,
 	GPIO_MDIO = 1 << 15,
 };

 unsigned int mclink_fpgacount;
 struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;

 static int setup_88e1518(const char *bus, unsigned char addr);

 int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
 {
 	int res;

 	switch (fpga) {
 	case 0:
 		out_le16(reg, data);
 		break;
 	default:
 		res = mclink_send(fpga - 1, regoff, data);
 		if (res < 0) {
 			printf("mclink_send reg %02lx data %04x returned %d\n",
 			       regoff, data, res);
 			return res;
 		}
 		break;
 	}

 	return 0;
 }

 int fpga_get_reg(u32 fpga, u16 *reg, off_t regoff, u16 *data)
 {
 	int res;

 	switch (fpga) {
 	case 0:
 		*data = in_le16(reg);
 		break;
 	default:
 		if (fpga > mclink_fpgacount)
 			return -EINVAL;
 		res = mclink_receive(fpga - 1, regoff, data);
 		if (res < 0) {
 			printf("mclink_receive reg %02lx returned %d\n",
 			       regoff, res);
 			return res;
 		}
 	}

 	return 0;
 }

 /*
  * Check Board Identity:
  */
 int checkboard(void)
 {
 	char *s = getenv("serial#");

 	puts("Board: ");

 	puts("IoCon");

 	if (s != NULL) {
 		puts(", serial# ");
 		puts(s);
 	}

 	puts("\n");

 	return 0;
 }

 static void print_fpga_info(unsigned int fpga, bool rgmii2_present)
 {
 	u16 versions;
 	u16 fpga_version;
 	u16 fpga_features;
 	unsigned unit_type;
 	unsigned hardware_version;
 	unsigned feature_compression;
 	unsigned feature_osd;
 	unsigned feature_audio;
 	unsigned feature_sysclock;
 	unsigned feature_ramconfig;
 	unsigned feature_carrier_speed;
 	unsigned feature_carriers;
 	unsigned feature_video_channels;

 	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;

 	FPGA_GET_REG(0, versions, &versions);
 	FPGA_GET_REG(0, fpga_version, &fpga_version);
 	FPGA_GET_REG(0, fpga_features, &fpga_features);

 	unit_type = (versions & 0xf000) >> 12;
 	feature_compression = (fpga_features & 0xe000) >> 13;
 	feature_osd = fpga_features & (1<<11);
 	feature_audio = (fpga_features & 0x0600) >> 9;
 	feature_sysclock = (fpga_features & 0x0180) >> 7;
 	feature_ramconfig = (fpga_features & 0x0060) >> 5;
 	feature_carrier_speed = fpga_features & (1<<4);
 	feature_carriers = (fpga_features & 0x000c) >> 2;
 	feature_video_channels = fpga_features & 0x0003;

 	if (legacy)
 		printf("legacy ");

 	switch (unit_type) {
 	case UNITTYPE_MAIN_USER:
 		printf("Mainchannel");
 		break;

 	case UNITTYPE_VIDEO_USER:
 		printf("Videochannel");
 		break;

 	default:
 		printf("UnitType %d(not supported)", unit_type);
 		break;
 	}

 	if (unit_type == UNITTYPE_MAIN_USER) {
 		if (legacy)
 			hardware_version =
 				(in_le16((void *)LATCH2_BASE)>>8) & 0x0f;
 		else
 			hardware_version =
 				  (!!pca9698_get_value(0x20, 24) << 0)
 				| (!!pca9698_get_value(0x20, 25) << 1)
 				| (!!pca9698_get_value(0x20, 26) << 2)
 				| (!!pca9698_get_value(0x20, 27) << 3);
 		switch (hardware_version) {
 		case HWVER_100:
 			printf(" HW-Ver 1.00,");
 			break;

 		case HWVER_104:
 			printf(" HW-Ver 1.04,");
 			break;

 		case HWVER_110:
 			printf(" HW-Ver 1.10,");
 			break;

 		case HWVER_120:
 			printf(" HW-Ver 1.20-1.21,");
 			break;

 		case HWVER_200:
 			printf(" HW-Ver 2.00,");
 			break;

 		case HWVER_210:
 			printf(" HW-Ver 2.10,");
 			break;

 		case HWVER_220:
 			printf(" HW-Ver 2.20,");
 			break;

 		case HWVER_230:
 			printf(" HW-Ver 2.30,");
 			break;

 		default:
 			printf(" HW-Ver %d(not supported),",
 			       hardware_version);
 			break;
 		}
 		if (rgmii2_present)
 			printf(" RGMII2,");
 	}

 	if (unit_type == UNITTYPE_VIDEO_USER) {
 		hardware_version = versions & 0x000f;
 		switch (hardware_version) {
 		case FPGA_HWVER_200:
 			printf(" HW-Ver 2.00,");
 			break;

 		case FPGA_HWVER_210:
 			printf(" HW-Ver 2.10,");
 			break;

 		default:
 			printf(" HW-Ver %d(not supported),",
 			       hardware_version);
 			break;
 		}
 	}

 	printf(" FPGA V %d.%02d\n       features:",
 	       fpga_version / 100, fpga_version % 100);


 	switch (feature_compression) {
 	case COMPRESSION_NONE:
 		printf(" no compression");
 		break;

 	case COMPRESSION_TYPE1_DELTA:
 		printf(" type1-deltacompression");
 		break;

 	case COMPRESSION_TYPE1_TYPE2_DELTA:
 		printf(" type1-deltacompression, type2-inlinecompression");
 		break;

 	default:
 		printf(" compression %d(not supported)", feature_compression);
 		break;
 	}

 	printf(", %sosd", feature_osd ? "" : "no ");

 	switch (feature_audio) {
 	case AUDIO_NONE:
 		printf(", no audio");
 		break;

 	case AUDIO_TX:
 		printf(", audio tx");
 		break;

 	case AUDIO_RX:
 		printf(", audio rx");
 		break;

 	case AUDIO_RXTX:
 		printf(", audio rx+tx");
 		break;

 	default:
 		printf(", audio %d(not supported)", feature_audio);
 		break;
 	}

 	puts(",\n       ");

 	switch (feature_sysclock) {
 	case SYSCLK_147456:
 		printf("clock 147.456 MHz");
 		break;

 	default:
 		printf("clock %d(not supported)", feature_sysclock);
 		break;
 	}

 	switch (feature_ramconfig) {
 	case RAM_DDR2_32:
 		printf(", RAM 32 bit DDR2");
 		break;

 	case RAM_DDR3_32:
 		printf(", RAM 32 bit DDR3");
 		break;

 	default:
 		printf(", RAM %d(not supported)", feature_ramconfig);
 		break;
 	}

 	printf(", %d carrier(s) %s", feature_carriers,
 	       feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s");

 	printf(", %d video channel(s)\n", feature_video_channels);
 }

 int last_stage_init(void)
 {
 	int slaves;
 	unsigned int k;
 	unsigned int mux_ch;
 	unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 };
 	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
 	u16 fpga_features;
 	int feature_carrier_speed = fpga_features & (1<<4);
 	bool ch0_rgmii2_present = false;

 	FPGA_GET_REG(0, fpga_features, &fpga_features);

 	if (!legacy) {
 		/* Turn on Parade DP501 */
 		pca9698_direction_output(0x20, 9, 1);

 		ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
 	}

 	/* wait for FPGA done */
 	for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) {
 		unsigned int ctr = 0;

 		if (i2c_probe(mclink_controllers[k]))
 			continue;

 		while (!(pca953x_get_val(mclink_controllers[k])
 		       & MCFPGA_DONE)) {
 			udelay(100000);
 			if (ctr++ > 5) {
 				printf("no done for mclink_controller %d\n", k);
 				break;
 			}
 		}
 	}

 	if (!legacy && (feature_carrier_speed == CARRIER_SPEED_1G)) {
 		miiphy_register(bb_miiphy_buses[0].name, bb_miiphy_read,
 				bb_miiphy_write);
 		for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) {
 			if ((mux_ch == 1) && !ch0_rgmii2_present)
 				continue;

 			setup_88e1518(bb_miiphy_buses[0].name, mux_ch);
 		}
 	}

 	/* give slave-PLLs and Parade DP501 some time to be up and running */
 	udelay(500000);

 	mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
 	slaves = mclink_probe();
 	mclink_fpgacount = 0;

 	print_fpga_info(0, ch0_rgmii2_present);
 	osd_probe(0);

 	if (slaves <= 0)
 		return 0;

 	mclink_fpgacount = slaves;

 	for (k = 1; k <= slaves; ++k) {
 		FPGA_GET_REG(k, fpga_features, &fpga_features);
 		feature_carrier_speed = fpga_features & (1<<4);

 		print_fpga_info(k, false);
 		osd_probe(k);
 		if (feature_carrier_speed == CARRIER_SPEED_1G) {
 			miiphy_register(bb_miiphy_buses[k].name,
 					bb_miiphy_read, bb_miiphy_write);
 			setup_88e1518(bb_miiphy_buses[k].name, 0);
 		}
 	}

 	return 0;
 }

 /*
  * provide access to fpga gpios (for I2C bitbang)
  * (these may look all too simple but make iocon.h much more readable)
  */
 void fpga_gpio_set(unsigned int bus, int pin)
 {
 	FPGA_SET_REG(bus, gpio.set, pin);
 }

 void fpga_gpio_clear(unsigned int bus, int pin)
 {
 	FPGA_SET_REG(bus, gpio.clear, pin);
 }

 int fpga_gpio_get(unsigned int bus, int pin)
 {
 	u16 val;

 	FPGA_GET_REG(bus, gpio.read, &val);

 	return val & pin;
 }

 void gd405ep_init(void)
 {
 	unsigned int k;

 	if (i2c_probe(0x20)) { /* i2c_probe returns 0 on success */
 		for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
 			gd->arch.fpga_state[k] |= FPGA_STATE_PLATFORM;
 	} else {
 		pca9698_direction_output(0x20, 4, 1);
 	}
 }

 void gd405ep_set_fpga_reset(unsigned state)
 {
 	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;

 	if (legacy) {
 		if (state) {
 			out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
 			out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
 		} else {
 			out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
 			out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
 		}
 	} else {
 		pca9698_set_value(0x20, 4, state ? 0 : 1);
 	}
 }

 void gd405ep_setup_hw(void)
 {
 	/*
 	 * set "startup-finished"-gpios
 	 */
 	gpio_write_bit(21, 0);
 	gpio_write_bit(22, 1);
 }

 int gd405ep_get_fpga_done(unsigned fpga)
 {
 	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;

 	if (legacy)
 		return in_le16((void *)LATCH2_BASE)
 		       & CONFIG_SYS_FPGA_DONE(fpga);
 	else
 		return pca9698_get_value(0x20, 20);
 }

 /*
  * FPGA MII bitbang implementation
  */

 struct fpga_mii {
 	unsigned fpga;
 	int mdio;
 } fpga_mii[] = {
 	{ 0, 1},
 	{ 1, 1},
 	{ 2, 1},
 	{ 3, 1},
 };

 static int mii_dummy_init(struct bb_miiphy_bus *bus)
 {
 	return 0;
 }

 static int mii_mdio_active(struct bb_miiphy_bus *bus)
 {
 	struct fpga_mii *fpga_mii = bus->priv;

 	if (fpga_mii->mdio)
 		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
 	else
 		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);

 	return 0;
 }

 static int mii_mdio_tristate(struct bb_miiphy_bus *bus)
 {
 	struct fpga_mii *fpga_mii = bus->priv;

 	FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);

 	return 0;
 }

 static int mii_set_mdio(struct bb_miiphy_bus *bus, int v)
 {
 	struct fpga_mii *fpga_mii = bus->priv;

 	if (v)
 		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
 	else
 		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);

 	fpga_mii->mdio = v;

 	return 0;
 }

 static int mii_get_mdio(struct bb_miiphy_bus *bus, int *v)
 {
 	u16 gpio;
 	struct fpga_mii *fpga_mii = bus->priv;

 	FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio);

 	*v = ((gpio & GPIO_MDIO) != 0);

 	return 0;
 }

 static int mii_set_mdc(struct bb_miiphy_bus *bus, int v)
 {
 	struct fpga_mii *fpga_mii = bus->priv;

 	if (v)
 		FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC);
 	else
 		FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC);

 	return 0;
 }

 static int mii_delay(struct bb_miiphy_bus *bus)
 {
 	udelay(1);

 	return 0;
 }

 struct bb_miiphy_bus bb_miiphy_buses[] = {
 	{
 		.name = "board0",
 		.init = mii_dummy_init,
 		.mdio_active = mii_mdio_active,
 		.mdio_tristate = mii_mdio_tristate,
 		.set_mdio = mii_set_mdio,
 		.get_mdio = mii_get_mdio,
 		.set_mdc = mii_set_mdc,
 		.delay = mii_delay,
 		.priv = &fpga_mii[0],
 	},
 	{
 		.name = "board1",
 		.init = mii_dummy_init,
 		.mdio_active = mii_mdio_active,
 		.mdio_tristate = mii_mdio_tristate,
 		.set_mdio = mii_set_mdio,
 		.get_mdio = mii_get_mdio,
 		.set_mdc = mii_set_mdc,
 		.delay = mii_delay,
 		.priv = &fpga_mii[1],
 	},
 	{
 		.name = "board2",
 		.init = mii_dummy_init,
 		.mdio_active = mii_mdio_active,
 		.mdio_tristate = mii_mdio_tristate,
 		.set_mdio = mii_set_mdio,
 		.get_mdio = mii_get_mdio,
 		.set_mdc = mii_set_mdc,
 		.delay = mii_delay,
 		.priv = &fpga_mii[2],
 	},
 	{
 		.name = "board3",
 		.init = mii_dummy_init,
 		.mdio_active = mii_mdio_active,
 		.mdio_tristate = mii_mdio_tristate,
 		.set_mdio = mii_set_mdio,
 		.get_mdio = mii_get_mdio,
 		.set_mdc = mii_set_mdc,
 		.delay = mii_delay,
 		.priv = &fpga_mii[3],
 	},
 };

 int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
 			  sizeof(bb_miiphy_buses[0]);

 enum {
 	MIICMD_SET,
 	MIICMD_MODIFY,
 	MIICMD_VERIFY_VALUE,
 	MIICMD_WAIT_FOR_VALUE,
 };

 struct mii_setupcmd {
 	u8 token;
 	u8 reg;
 	u16 data;
 	u16 mask;
 	u32 timeout;
 };

 /*
  * verify we are talking to a 88e1518
  */
 struct mii_setupcmd verify_88e1518[] = {
 	{ MIICMD_SET, 22, 0x0000 },
 	{ MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff },
 	{ MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 },
 };

 /*
  * workaround for erratum mentioned in 88E1518 release notes
  */
 struct mii_setupcmd fixup_88e1518[] = {
 	{ MIICMD_SET, 22, 0x00ff },
 	{ MIICMD_SET, 17, 0x214b },
 	{ MIICMD_SET, 16, 0x2144 },
 	{ MIICMD_SET, 17, 0x0c28 },
 	{ MIICMD_SET, 16, 0x2146 },
 	{ MIICMD_SET, 17, 0xb233 },
 	{ MIICMD_SET, 16, 0x214d },
 	{ MIICMD_SET, 17, 0xcc0c },
 	{ MIICMD_SET, 16, 0x2159 },
 	{ MIICMD_SET, 22, 0x00fb },
 	{ MIICMD_SET,  7, 0xc00d },
 	{ MIICMD_SET, 22, 0x0000 },
 };

 /*
  * default initialization:
  * - set RGMII receive timing to "receive clock transition when data stable"
  * - set RGMII transmit timing to "transmit clock internally delayed"
  * - set RGMII output impedance target to 78,8 Ohm
  * - run output impedance calibration
  * - set autonegotiation advertise to 1000FD only
  */
 struct mii_setupcmd default_88e1518[] = {
 	{ MIICMD_SET, 22, 0x0002 },
 	{ MIICMD_MODIFY, 21, 0x0030, 0x0030 },
 	{ MIICMD_MODIFY, 25, 0x0000, 0x0003 },
 	{ MIICMD_MODIFY, 24, 0x8000, 0x8000 },
 	{ MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 },
 	{ MIICMD_SET, 22, 0x0000 },
 	{ MIICMD_MODIFY, 4, 0x0000, 0x01e0 },
 	{ MIICMD_MODIFY, 9, 0x0200, 0x0300 },
 };

 /*
  * turn off CLK125 for PHY daughterboard
  */
 struct mii_setupcmd ch1fix_88e1518[] = {
 	{ MIICMD_SET, 22, 0x0002 },
 	{ MIICMD_MODIFY, 16, 0x0006, 0x0006 },
 	{ MIICMD_SET, 22, 0x0000 },
 };

 /*
  * perform copper software reset
  */
 struct mii_setupcmd swreset_88e1518[] = {
 	{ MIICMD_SET, 22, 0x0000 },
 	{ MIICMD_MODIFY, 0, 0x8000, 0x8000 },
 	{ MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 },
 };

 static int process_setupcmd(const char *bus, unsigned char addr,
 			    struct mii_setupcmd *setupcmd)
 {
 	int res;
 	u8 reg = setupcmd->reg;
 	u16 data = setupcmd->data;
 	u16 mask = setupcmd->mask;
 	u32 timeout = setupcmd->timeout;
 	u16 orig_data;
 	unsigned long start;

 	debug("mii %s:%u reg %2u ", bus, addr, reg);

 	switch (setupcmd->token) {
 	case MIICMD_MODIFY:
 		res = miiphy_read(bus, addr, reg, &orig_data);
 		if (res)
 			break;
 		debug("is %04x. (value %04x mask %04x) ", orig_data, data,
 		      mask);
 		data = (orig_data & ~mask) | (data & mask);
 	case MIICMD_SET:
 		debug("=> %04x\n", data);
 		res = miiphy_write(bus, addr, reg, data);
 		break;
 	case MIICMD_VERIFY_VALUE:
 		res = miiphy_read(bus, addr, reg, &orig_data);
 		if (res)
 			break;
 		if ((orig_data & mask) != (data & mask))
 			res = -1;
 		debug("(value %04x mask %04x) == %04x? %s\n", data, mask,
 		      orig_data, res ? "FAIL" : "PASS");
 		break;
 	case MIICMD_WAIT_FOR_VALUE:
 		res = -1;
 		start = get_timer(0);
 		while ((res != 0) && (get_timer(start) < timeout)) {
 			res = miiphy_read(bus, addr, reg, &orig_data);
 			if (res)
 				continue;
 			if ((orig_data & mask) != (data & mask))
 				res = -1;
 		}
 		debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data,
 		      mask, orig_data, res ? "FAIL" : "PASS",
 		      get_timer(start));
 		break;
 	default:
 		res = -1;
 		break;
 	}

 	return res;
 }

 static int process_setup(const char *bus, unsigned char addr,
 			    struct mii_setupcmd *setupcmd, unsigned int count)
 {
 	int res = 0;
 	unsigned int k;

 	for (k = 0; k < count; ++k) {
 		res = process_setupcmd(bus, addr, &setupcmd[k]);
 		if (res) {
 			printf("mii cmd %u on bus %s addr %u failed, aborting setup",
 			       setupcmd[k].token, bus, addr);
 			break;
 		}
 	}

 	return res;
 }

 static int setup_88e1518(const char *bus, unsigned char addr)
 {
 	int res;

 	res = process_setup(bus, addr,
 			    verify_88e1518, ARRAY_SIZE(verify_88e1518));
 	if (res)
 		return res;

 	res = process_setup(bus, addr,
 			    fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
 	if (res)
 		return res;

 	res = process_setup(bus, addr,
 			    default_88e1518, ARRAY_SIZE(default_88e1518));
 	if (res)
 		return res;

 	if (addr) {
 		res = process_setup(bus, addr,
 				    ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
 		if (res)
 			return res;
 	}

 	res = process_setup(bus, addr,
 			    swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
 	if (res)
 		return res;

 	return 0;
 }
	/*
	* (C) Copyright 2010
	* Dirk Eibach, Guntermann & Drunck GmbH, eibach@gdsys.de
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <command.h>
	#include <errno.h>
	#include <asm/processor.h>
	#include <asm/io.h>
	#include <asm/ppc4xx-gpio.h>

	#include "405ep.h"
	#include <gdsys_fpga.h>

	#include "../common/osd.h"
	#include "../common/mclink.h"

	#include <i2c.h>
	#include <pca953x.h>
	#include <pca9698.h>

	#include <miiphy.h>

	DECLARE_GLOBAL_DATA_PTR;

	#define LATCH0_BASE (CONFIG_SYS_LATCH_BASE)
	#define LATCH1_BASE (CONFIG_SYS_LATCH_BASE + 0x100)
	#define LATCH2_BASE (CONFIG_SYS_LATCH_BASE + 0x200)

	#define MAX_MUX_CHANNELS 2

	enum {
	UNITTYPE_MAIN_SERVER = 0,
	UNITTYPE_MAIN_USER = 1,
	UNITTYPE_VIDEO_SERVER = 2,
	UNITTYPE_VIDEO_USER = 3,
	};

	enum {
	HWVER_100 = 0,
	HWVER_104 = 1,
	HWVER_110 = 2,
	HWVER_120 = 3,
	HWVER_200 = 4,
	HWVER_210 = 5,
	HWVER_220 = 6,
	HWVER_230 = 7,
	};

	enum {
	FPGA_HWVER_200 = 0,
	FPGA_HWVER_210 = 1,
	};

	enum {
	COMPRESSION_NONE = 0,
	COMPRESSION_TYPE1_DELTA = 1,
	COMPRESSION_TYPE1_TYPE2_DELTA = 3,
	};

	enum {
	AUDIO_NONE = 0,
	AUDIO_TX = 1,
	AUDIO_RX = 2,
	AUDIO_RXTX = 3,
	};

	enum {
	SYSCLK_147456 = 0,
	};

	enum {
	RAM_DDR2_32 = 0,
	RAM_DDR3_32 = 1,
	};

	enum {
	CARRIER_SPEED_1G = 0,
	CARRIER_SPEED_2_5G = 1,
	};

	enum {
	MCFPGA_DONE = 1 << 0,
	MCFPGA_INIT_N = 1 << 1,
	MCFPGA_PROGRAM_N = 1 << 2,
	MCFPGA_UPDATE_ENABLE_N = 1 << 3,
	MCFPGA_RESET_N = 1 << 4,
	};

	enum {
	GPIO_MDC = 1 << 14,
	GPIO_MDIO = 1 << 15,
	};

	unsigned int mclink_fpgacount;
	struct ihs_fpga *fpga_ptr[] = CONFIG_SYS_FPGA_PTR;

	static int setup_88e1518(const char *bus, unsigned char addr);

	int fpga_set_reg(u32 fpga, u16 *reg, off_t regoff, u16 data)
	{
	int res;

	switch (fpga) {
	case 0:
	out_le16(reg, data);
	break;
	default:
	res = mclink_send(fpga - 1, regoff, data);
	if (res < 0) {
	printf("mclink_send reg %02lx data %04x returned %d\n",
	regoff, data, res);
	return res;
	}
	break;
	}

	return 0;
	}

	int fpga_get_reg(u32 fpga, u16 reg, off_t regoff, u16 data)
	{
	int res;

	switch (fpga) {
	case 0:
	*data = in_le16(reg);
	break;
	default:
	if (fpga > mclink_fpgacount)
	return -EINVAL;
	res = mclink_receive(fpga - 1, regoff, data);
	if (res < 0) {
	printf("mclink_receive reg %02lx returned %d\n",
	regoff, res);
	return res;
	}
	}

	return 0;
	}

	/*
	* Check Board Identity:
	*/
	int checkboard(void)
	{
	char *s = getenv("serial#");

	puts("Board: ");

	puts("IoCon");

	if (s != NULL) {
	puts(", serial# ");
	puts(s);
	}

	puts("\n");

	return 0;
	}

	static void print_fpga_info(unsigned int fpga, bool rgmii2_present)
	{
	u16 versions;
	u16 fpga_version;
	u16 fpga_features;
	unsigned unit_type;
	unsigned hardware_version;
	unsigned feature_compression;
	unsigned feature_osd;
	unsigned feature_audio;
	unsigned feature_sysclock;
	unsigned feature_ramconfig;
	unsigned feature_carrier_speed;
	unsigned feature_carriers;
	unsigned feature_video_channels;

	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;

	FPGA_GET_REG(0, versions, &versions);
	FPGA_GET_REG(0, fpga_version, &fpga_version);
	FPGA_GET_REG(0, fpga_features, &fpga_features);

	unit_type = (versions & 0xf000) >> 12;
	feature_compression = (fpga_features & 0xe000) >> 13;
	feature_osd = fpga_features & (1<<11);
	feature_audio = (fpga_features & 0x0600) >> 9;
	feature_sysclock = (fpga_features & 0x0180) >> 7;
	feature_ramconfig = (fpga_features & 0x0060) >> 5;
	feature_carrier_speed = fpga_features & (1<<4);
	feature_carriers = (fpga_features & 0x000c) >> 2;
	feature_video_channels = fpga_features & 0x0003;

	if (legacy)
	printf("legacy ");

	switch (unit_type) {
	case UNITTYPE_MAIN_USER:
	printf("Mainchannel");
	break;

	case UNITTYPE_VIDEO_USER:
	printf("Videochannel");
	break;

	default:
	printf("UnitType %d(not supported)", unit_type);
	break;
	}

	if (unit_type == UNITTYPE_MAIN_USER) {
	if (legacy)
	hardware_version =
	(in_le16((void *)LATCH2_BASE)>>8) & 0x0f;
	else
	hardware_version =
	(!!pca9698_get_value(0x20, 24) << 0)
	\| (!!pca9698_get_value(0x20, 25) << 1)
	\| (!!pca9698_get_value(0x20, 26) << 2)
	\| (!!pca9698_get_value(0x20, 27) << 3);
	switch (hardware_version) {
	case HWVER_100:
	printf(" HW-Ver 1.00,");
	break;

	case HWVER_104:
	printf(" HW-Ver 1.04,");
	break;

	case HWVER_110:
	printf(" HW-Ver 1.10,");
	break;

	case HWVER_120:
	printf(" HW-Ver 1.20-1.21,");
	break;

	case HWVER_200:
	printf(" HW-Ver 2.00,");
	break;

	case HWVER_210:
	printf(" HW-Ver 2.10,");
	break;

	case HWVER_220:
	printf(" HW-Ver 2.20,");
	break;

	case HWVER_230:
	printf(" HW-Ver 2.30,");
	break;

	default:
	printf(" HW-Ver %d(not supported),",
	hardware_version);
	break;
	}
	if (rgmii2_present)
	printf(" RGMII2,");
	}

	if (unit_type == UNITTYPE_VIDEO_USER) {
	hardware_version = versions & 0x000f;
	switch (hardware_version) {
	case FPGA_HWVER_200:
	printf(" HW-Ver 2.00,");
	break;

	case FPGA_HWVER_210:
	printf(" HW-Ver 2.10,");
	break;

	default:
	printf(" HW-Ver %d(not supported),",
	hardware_version);
	break;
	}
	}

	printf(" FPGA V %d.%02d\n features:",
	fpga_version / 100, fpga_version % 100);


	switch (feature_compression) {
	case COMPRESSION_NONE:
	printf(" no compression");
	break;

	case COMPRESSION_TYPE1_DELTA:
	printf(" type1-deltacompression");
	break;

	case COMPRESSION_TYPE1_TYPE2_DELTA:
	printf(" type1-deltacompression, type2-inlinecompression");
	break;

	default:
	printf(" compression %d(not supported)", feature_compression);
	break;
	}

	printf(", %sosd", feature_osd ? "" : "no ");

	switch (feature_audio) {
	case AUDIO_NONE:
	printf(", no audio");
	break;

	case AUDIO_TX:
	printf(", audio tx");
	break;

	case AUDIO_RX:
	printf(", audio rx");
	break;

	case AUDIO_RXTX:
	printf(", audio rx+tx");
	break;

	default:
	printf(", audio %d(not supported)", feature_audio);
	break;
	}

	puts(",\n ");

	switch (feature_sysclock) {
	case SYSCLK_147456:
	printf("clock 147.456 MHz");
	break;

	default:
	printf("clock %d(not supported)", feature_sysclock);
	break;
	}

	switch (feature_ramconfig) {
	case RAM_DDR2_32:
	printf(", RAM 32 bit DDR2");
	break;

	case RAM_DDR3_32:
	printf(", RAM 32 bit DDR3");
	break;

	default:
	printf(", RAM %d(not supported)", feature_ramconfig);
	break;
	}

	printf(", %d carrier(s) %s", feature_carriers,
	feature_carrier_speed ? "2.5Gbit/s" : "1Gbit/s");

	printf(", %d video channel(s)\n", feature_video_channels);
	}

	int last_stage_init(void)
	{
	int slaves;
	unsigned int k;
	unsigned int mux_ch;
	unsigned char mclink_controllers[] = { 0x24, 0x25, 0x26 };
	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;
	u16 fpga_features;
	int feature_carrier_speed = fpga_features & (1<<4);
	bool ch0_rgmii2_present = false;

	FPGA_GET_REG(0, fpga_features, &fpga_features);

	if (!legacy) {
	/* Turn on Parade DP501 */
	pca9698_direction_output(0x20, 9, 1);

	ch0_rgmii2_present = !pca9698_get_value(0x20, 30);
	}

	/* wait for FPGA done */
	for (k = 0; k < ARRAY_SIZE(mclink_controllers); ++k) {
	unsigned int ctr = 0;

	if (i2c_probe(mclink_controllers[k]))
	continue;

	while (!(pca953x_get_val(mclink_controllers[k])
	& MCFPGA_DONE)) {
	udelay(100000);
	if (ctr++ > 5) {
	printf("no done for mclink_controller %d\n", k);
	break;
	}
	}
	}

	if (!legacy && (feature_carrier_speed == CARRIER_SPEED_1G)) {
	miiphy_register(bb_miiphy_buses[0].name, bb_miiphy_read,
	bb_miiphy_write);
	for (mux_ch = 0; mux_ch < MAX_MUX_CHANNELS; ++mux_ch) {
	if ((mux_ch == 1) && !ch0_rgmii2_present)
	continue;

	setup_88e1518(bb_miiphy_buses[0].name, mux_ch);
	}
	}

	/* give slave-PLLs and Parade DP501 some time to be up and running */
	udelay(500000);

	mclink_fpgacount = CONFIG_SYS_MCLINK_MAX;
	slaves = mclink_probe();
	mclink_fpgacount = 0;

	print_fpga_info(0, ch0_rgmii2_present);
	osd_probe(0);

	if (slaves <= 0)
	return 0;

	mclink_fpgacount = slaves;

	for (k = 1; k <= slaves; ++k) {
	FPGA_GET_REG(k, fpga_features, &fpga_features);
	feature_carrier_speed = fpga_features & (1<<4);

	print_fpga_info(k, false);
	osd_probe(k);
	if (feature_carrier_speed == CARRIER_SPEED_1G) {
	miiphy_register(bb_miiphy_buses[k].name,
	bb_miiphy_read, bb_miiphy_write);
	setup_88e1518(bb_miiphy_buses[k].name, 0);
	}
	}

	return 0;
	}

	/*
	* provide access to fpga gpios (for I2C bitbang)
	* (these may look all too simple but make iocon.h much more readable)
	*/
	void fpga_gpio_set(unsigned int bus, int pin)
	{
	FPGA_SET_REG(bus, gpio.set, pin);
	}

	void fpga_gpio_clear(unsigned int bus, int pin)
	{
	FPGA_SET_REG(bus, gpio.clear, pin);
	}

	int fpga_gpio_get(unsigned int bus, int pin)
	{
	u16 val;

	FPGA_GET_REG(bus, gpio.read, &val);

	return val & pin;
	}

	void gd405ep_init(void)
	{
	unsigned int k;

	if (i2c_probe(0x20)) { /* i2c_probe returns 0 on success */
	for (k = 0; k < CONFIG_SYS_FPGA_COUNT; ++k)
	gd->arch.fpga_state[k] \|= FPGA_STATE_PLATFORM;
	} else {
	pca9698_direction_output(0x20, 4, 1);
	}
	}

	void gd405ep_set_fpga_reset(unsigned state)
	{
	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;

	if (legacy) {
	if (state) {
	out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_RESET);
	out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_RESET);
	} else {
	out_le16((void *)LATCH0_BASE, CONFIG_SYS_LATCH0_BOOT);
	out_le16((void *)LATCH1_BASE, CONFIG_SYS_LATCH1_BOOT);
	}
	} else {
	pca9698_set_value(0x20, 4, state ? 0 : 1);
	}
	}

	void gd405ep_setup_hw(void)
	{
	/*
	* set "startup-finished"-gpios
	*/
	gpio_write_bit(21, 0);
	gpio_write_bit(22, 1);
	}

	int gd405ep_get_fpga_done(unsigned fpga)
	{
	int legacy = get_fpga_state(0) & FPGA_STATE_PLATFORM;

	if (legacy)
	return in_le16((void *)LATCH2_BASE)
	& CONFIG_SYS_FPGA_DONE(fpga);
	else
	return pca9698_get_value(0x20, 20);
	}

	/*
	* FPGA MII bitbang implementation
	*/

	struct fpga_mii {
	unsigned fpga;
	int mdio;
	} fpga_mii[] = {
	{ 0, 1},
	{ 1, 1},
	{ 2, 1},
	{ 3, 1},
	};

	static int mii_dummy_init(struct bb_miiphy_bus *bus)
	{
	return 0;
	}

	static int mii_mdio_active(struct bb_miiphy_bus *bus)
	{
	struct fpga_mii *fpga_mii = bus->priv;

	if (fpga_mii->mdio)
	FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
	else
	FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);

	return 0;
	}

	static int mii_mdio_tristate(struct bb_miiphy_bus *bus)
	{
	struct fpga_mii *fpga_mii = bus->priv;

	FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);

	return 0;
	}

	static int mii_set_mdio(struct bb_miiphy_bus *bus, int v)
	{
	struct fpga_mii *fpga_mii = bus->priv;

	if (v)
	FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDIO);
	else
	FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDIO);

	fpga_mii->mdio = v;

	return 0;
	}

	static int mii_get_mdio(struct bb_miiphy_bus bus, int v)
	{
	u16 gpio;
	struct fpga_mii *fpga_mii = bus->priv;

	FPGA_GET_REG(fpga_mii->fpga, gpio.read, &gpio);

	*v = ((gpio & GPIO_MDIO) != 0);

	return 0;
	}

	static int mii_set_mdc(struct bb_miiphy_bus *bus, int v)
	{
	struct fpga_mii *fpga_mii = bus->priv;

	if (v)
	FPGA_SET_REG(fpga_mii->fpga, gpio.set, GPIO_MDC);
	else
	FPGA_SET_REG(fpga_mii->fpga, gpio.clear, GPIO_MDC);

	return 0;
	}

	static int mii_delay(struct bb_miiphy_bus *bus)
	{
	udelay(1);

	return 0;
	}

	struct bb_miiphy_bus bb_miiphy_buses[] = {
	{
	.name = "board0",
	.init = mii_dummy_init,
	.mdio_active = mii_mdio_active,
	.mdio_tristate = mii_mdio_tristate,
	.set_mdio = mii_set_mdio,
	.get_mdio = mii_get_mdio,
	.set_mdc = mii_set_mdc,
	.delay = mii_delay,
	.priv = &fpga_mii[0],
	},
	{
	.name = "board1",
	.init = mii_dummy_init,
	.mdio_active = mii_mdio_active,
	.mdio_tristate = mii_mdio_tristate,
	.set_mdio = mii_set_mdio,
	.get_mdio = mii_get_mdio,
	.set_mdc = mii_set_mdc,
	.delay = mii_delay,
	.priv = &fpga_mii[1],
	},
	{
	.name = "board2",
	.init = mii_dummy_init,
	.mdio_active = mii_mdio_active,
	.mdio_tristate = mii_mdio_tristate,
	.set_mdio = mii_set_mdio,
	.get_mdio = mii_get_mdio,
	.set_mdc = mii_set_mdc,
	.delay = mii_delay,
	.priv = &fpga_mii[2],
	},
	{
	.name = "board3",
	.init = mii_dummy_init,
	.mdio_active = mii_mdio_active,
	.mdio_tristate = mii_mdio_tristate,
	.set_mdio = mii_set_mdio,
	.get_mdio = mii_get_mdio,
	.set_mdc = mii_set_mdc,
	.delay = mii_delay,
	.priv = &fpga_mii[3],
	},
	};

	int bb_miiphy_buses_num = sizeof(bb_miiphy_buses) /
	sizeof(bb_miiphy_buses[0]);

	enum {
	MIICMD_SET,
	MIICMD_MODIFY,
	MIICMD_VERIFY_VALUE,
	MIICMD_WAIT_FOR_VALUE,
	};

	struct mii_setupcmd {
	u8 token;
	u8 reg;
	u16 data;
	u16 mask;
	u32 timeout;
	};

	/*
	* verify we are talking to a 88e1518
	*/
	struct mii_setupcmd verify_88e1518[] = {
	{ MIICMD_SET, 22, 0x0000 },
	{ MIICMD_VERIFY_VALUE, 2, 0x0141, 0xffff },
	{ MIICMD_VERIFY_VALUE, 3, 0x0dd0, 0xfff0 },
	};

	/*
	* workaround for erratum mentioned in 88E1518 release notes
	*/
	struct mii_setupcmd fixup_88e1518[] = {
	{ MIICMD_SET, 22, 0x00ff },
	{ MIICMD_SET, 17, 0x214b },
	{ MIICMD_SET, 16, 0x2144 },
	{ MIICMD_SET, 17, 0x0c28 },
	{ MIICMD_SET, 16, 0x2146 },
	{ MIICMD_SET, 17, 0xb233 },
	{ MIICMD_SET, 16, 0x214d },
	{ MIICMD_SET, 17, 0xcc0c },
	{ MIICMD_SET, 16, 0x2159 },
	{ MIICMD_SET, 22, 0x00fb },
	{ MIICMD_SET, 7, 0xc00d },
	{ MIICMD_SET, 22, 0x0000 },
	};

	/*
	* default initialization:
	* - set RGMII receive timing to "receive clock transition when data stable"
	* - set RGMII transmit timing to "transmit clock internally delayed"
	* - set RGMII output impedance target to 78,8 Ohm
	* - run output impedance calibration
	* - set autonegotiation advertise to 1000FD only
	*/
	struct mii_setupcmd default_88e1518[] = {
	{ MIICMD_SET, 22, 0x0002 },
	{ MIICMD_MODIFY, 21, 0x0030, 0x0030 },
	{ MIICMD_MODIFY, 25, 0x0000, 0x0003 },
	{ MIICMD_MODIFY, 24, 0x8000, 0x8000 },
	{ MIICMD_WAIT_FOR_VALUE, 24, 0x4000, 0x4000, 2000 },
	{ MIICMD_SET, 22, 0x0000 },
	{ MIICMD_MODIFY, 4, 0x0000, 0x01e0 },
	{ MIICMD_MODIFY, 9, 0x0200, 0x0300 },
	};

	/*
	* turn off CLK125 for PHY daughterboard
	*/
	struct mii_setupcmd ch1fix_88e1518[] = {
	{ MIICMD_SET, 22, 0x0002 },
	{ MIICMD_MODIFY, 16, 0x0006, 0x0006 },
	{ MIICMD_SET, 22, 0x0000 },
	};

	/*
	* perform copper software reset
	*/
	struct mii_setupcmd swreset_88e1518[] = {
	{ MIICMD_SET, 22, 0x0000 },
	{ MIICMD_MODIFY, 0, 0x8000, 0x8000 },
	{ MIICMD_WAIT_FOR_VALUE, 0, 0x0000, 0x8000, 2000 },
	};

	static int process_setupcmd(const char *bus, unsigned char addr,
	struct mii_setupcmd *setupcmd)
	{
	int res;
	u8 reg = setupcmd->reg;
	u16 data = setupcmd->data;
	u16 mask = setupcmd->mask;
	u32 timeout = setupcmd->timeout;
	u16 orig_data;
	unsigned long start;

	debug("mii %s:%u reg %2u ", bus, addr, reg);

	switch (setupcmd->token) {
	case MIICMD_MODIFY:
	res = miiphy_read(bus, addr, reg, &orig_data);
	if (res)
	break;
	debug("is %04x. (value %04x mask %04x) ", orig_data, data,
	mask);
	data = (orig_data & ~mask) \| (data & mask);
	case MIICMD_SET:
	debug("=> %04x\n", data);
	res = miiphy_write(bus, addr, reg, data);
	break;
	case MIICMD_VERIFY_VALUE:
	res = miiphy_read(bus, addr, reg, &orig_data);
	if (res)
	break;
	if ((orig_data & mask) != (data & mask))
	res = -1;
	debug("(value %04x mask %04x) == %04x? %s\n", data, mask,
	orig_data, res ? "FAIL" : "PASS");
	break;
	case MIICMD_WAIT_FOR_VALUE:
	res = -1;
	start = get_timer(0);
	while ((res != 0) && (get_timer(start) < timeout)) {
	res = miiphy_read(bus, addr, reg, &orig_data);
	if (res)
	continue;
	if ((orig_data & mask) != (data & mask))
	res = -1;
	}
	debug("(value %04x mask %04x) == %04x? %s after %lu ms\n", data,
	mask, orig_data, res ? "FAIL" : "PASS",
	get_timer(start));
	break;
	default:
	res = -1;
	break;
	}

	return res;
	}

	static int process_setup(const char *bus, unsigned char addr,
	struct mii_setupcmd *setupcmd, unsigned int count)
	{
	int res = 0;
	unsigned int k;

	for (k = 0; k < count; ++k) {
	res = process_setupcmd(bus, addr, &setupcmd[k]);
	if (res) {
	printf("mii cmd %u on bus %s addr %u failed, aborting setup",
	setupcmd[k].token, bus, addr);
	break;
	}
	}

	return res;
	}

	static int setup_88e1518(const char *bus, unsigned char addr)
	{
	int res;

	res = process_setup(bus, addr,
	verify_88e1518, ARRAY_SIZE(verify_88e1518));
	if (res)
	return res;

	res = process_setup(bus, addr,
	fixup_88e1518, ARRAY_SIZE(fixup_88e1518));
	if (res)
	return res;

	res = process_setup(bus, addr,
	default_88e1518, ARRAY_SIZE(default_88e1518));
	if (res)
	return res;

	if (addr) {
	res = process_setup(bus, addr,
	ch1fix_88e1518, ARRAY_SIZE(ch1fix_88e1518));
	if (res)
	return res;
	}

	res = process_setup(bus, addr,
	swreset_88e1518, ARRAY_SIZE(swreset_88e1518));
	if (res)
	return res;

	return 0;
	}