drivers/mtd/nand/atmel_nand.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2007-2008
  * Stelian Pop <stelian@popies.net>
  * Lead Tech Design <www.leadtechdesign.com>
  *
  * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <asm/arch/hardware.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/at91_pio.h>

 #include <nand.h>

 #ifdef CONFIG_ATMEL_NAND_HWECC

 /* Register access macros */
 #define ecc_readl(add, reg)				\
 	readl(AT91_BASE_SYS + add + ATMEL_ECC_##reg)
 #define ecc_writel(add, reg, value)			\
 	writel((value), AT91_BASE_SYS + add + ATMEL_ECC_##reg)

 #include "atmel_nand_ecc.h"	/* Hardware ECC registers */

 /* oob layout for large page size
  * bad block info is on bytes 0 and 1
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
 static struct nand_ecclayout atmel_oobinfo_large = {
 	.eccbytes = 4,
 	.eccpos = {60, 61, 62, 63},
 	.oobfree = {
 		{2, 58}
 	},
 };

 /* oob layout for small page size
  * bad block info is on bytes 4 and 5
  * the bytes have to be consecutives to avoid
  * several NAND_CMD_RNDOUT during read
  */
 static struct nand_ecclayout atmel_oobinfo_small = {
 	.eccbytes = 4,
 	.eccpos = {0, 1, 2, 3},
 	.oobfree = {
 		{6, 10}
 	},
 };

 /*
  * Calculate HW ECC
  *
  * function called after a write
  *
  * mtd:        MTD block structure
  * dat:        raw data (unused)
  * ecc_code:   buffer for ECC
  */
 static int atmel_nand_calculate(struct mtd_info *mtd,
 		const u_char *dat, unsigned char *ecc_code)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	unsigned int ecc_value;

 	/* get the first 2 ECC bytes */
 	ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR);

 	ecc_code[0] = ecc_value & 0xFF;
 	ecc_code[1] = (ecc_value >> 8) & 0xFF;

 	/* get the last 2 ECC bytes */
 	ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, NPR) & ATMEL_ECC_NPARITY;

 	ecc_code[2] = ecc_value & 0xFF;
 	ecc_code[3] = (ecc_value >> 8) & 0xFF;

 	return 0;
 }

 /*
  * HW ECC read page function
  *
  * mtd:        mtd info structure
  * chip:       nand chip info structure
  * buf:        buffer to store read data
  */
 static int atmel_nand_read_page(struct mtd_info *mtd,
 		struct nand_chip *chip, uint8_t *buf, int page)
 {
 	int eccsize = chip->ecc.size;
 	int eccbytes = chip->ecc.bytes;
 	uint32_t *eccpos = chip->ecc.layout->eccpos;
 	uint8_t *p = buf;
 	uint8_t *oob = chip->oob_poi;
 	uint8_t *ecc_pos;
 	int stat;

 	/* read the page */
 	chip->read_buf(mtd, p, eccsize);

 	/* move to ECC position if needed */
 	if (eccpos[0] != 0) {
 		/* This only works on large pages
 		 * because the ECC controller waits for
 		 * NAND_CMD_RNDOUTSTART after the
 		 * NAND_CMD_RNDOUT.
 		 * anyway, for small pages, the eccpos[0] == 0
 		 */
 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
 				mtd->writesize + eccpos[0], -1);
 	}

 	/* the ECC controller needs to read the ECC just after the data */
 	ecc_pos = oob + eccpos[0];
 	chip->read_buf(mtd, ecc_pos, eccbytes);

 	/* check if there's an error */
 	stat = chip->ecc.correct(mtd, p, oob, NULL);

 	if (stat < 0)
 		mtd->ecc_stats.failed++;
 	else
 		mtd->ecc_stats.corrected += stat;

 	/* get back to oob start (end of page) */
 	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);

 	/* read the oob */
 	chip->read_buf(mtd, oob, mtd->oobsize);

 	return 0;
 }

 /*
  * HW ECC Correction
  *
  * function called after a read
  *
  * mtd:        MTD block structure
  * dat:        raw data read from the chip
  * read_ecc:   ECC from the chip (unused)
  * isnull:     unused
  *
  * Detect and correct a 1 bit error for a page
  */
 static int atmel_nand_correct(struct mtd_info *mtd, u_char *dat,
 		u_char *read_ecc, u_char *isnull)
 {
 	struct nand_chip *nand_chip = mtd->priv;
 	unsigned int ecc_status, ecc_parity, ecc_mode;
 	unsigned int ecc_word, ecc_bit;

 	/* get the status from the Status Register */
 	ecc_status = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, SR);

 	/* if there's no error */
 	if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
 		return 0;

 	/* get error bit offset (4 bits) */
 	ecc_bit = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_BITADDR;
 	/* get word address (12 bits) */
 	ecc_word = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_WORDADDR;
 	ecc_word >>= 4;

 	/* if there are multiple errors */
 	if (ecc_status & ATMEL_ECC_MULERR) {
 		/* check if it is a freshly erased block
 		 * (filled with 0xff) */
 		if ((ecc_bit == ATMEL_ECC_BITADDR)
 				&& (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
 			/* the block has just been erased, return OK */
 			return 0;
 		}
 		/* it doesn't seems to be a freshly
 		 * erased block.
 		 * We can't correct so many errors */
 		printk(KERN_WARNING "atmel_nand : multiple errors detected."
 				" Unable to correct.\n");
 		return -EIO;
 	}

 	/* if there's a single bit error : we can correct it */
 	if (ecc_status & ATMEL_ECC_ECCERR) {
 		/* there's nothing much to do here.
 		 * the bit error is on the ECC itself.
 		 */
 		printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
 				" Nothing to correct\n");
 		return 0;
 	}

 	printk(KERN_WARNING "atmel_nand : one bit error on data."
 			" (word offset in the page :"
 			" 0x%x bit offset : 0x%x)\n",
 			ecc_word, ecc_bit);
 	/* correct the error */
 	if (nand_chip->options & NAND_BUSWIDTH_16) {
 		/* 16 bits words */
 		((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
 	} else {
 		/* 8 bits words */
 		dat[ecc_word] ^= (1 << ecc_bit);
 	}
 	printk(KERN_WARNING "atmel_nand : error corrected\n");
 	return 1;
 }

 /*
  * Enable HW ECC : unused on most chips
  */
 static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
 {
 }
 #endif

 static void at91_nand_hwcontrol(struct mtd_info *mtd,
 					 int cmd, unsigned int ctrl)
 {
 	struct nand_chip *this = mtd->priv;

 	if (ctrl & NAND_CTRL_CHANGE) {
 		ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
 		IO_ADDR_W &= ~(CONFIG_SYS_NAND_MASK_ALE
 			     | CONFIG_SYS_NAND_MASK_CLE);

 		if (ctrl & NAND_CLE)
 			IO_ADDR_W |= CONFIG_SYS_NAND_MASK_CLE;
 		if (ctrl & NAND_ALE)
 			IO_ADDR_W |= CONFIG_SYS_NAND_MASK_ALE;

 #ifdef CONFIG_SYS_NAND_ENABLE_PIN
 		at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
 				    !(ctrl & NAND_NCE));
 #endif
 		this->IO_ADDR_W = (void *) IO_ADDR_W;
 	}

 	if (cmd != NAND_CMD_NONE)
 		writeb(cmd, this->IO_ADDR_W);
 }

 #ifdef CONFIG_SYS_NAND_READY_PIN
 static int at91_nand_ready(struct mtd_info *mtd)
 {
 	return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
 }
 #endif

 int board_nand_init(struct nand_chip *nand)
 {
 #ifdef CONFIG_ATMEL_NAND_HWECC
 	static int chip_nr = 0;
 	struct mtd_info *mtd;
 #endif

 	nand->ecc.mode = NAND_ECC_SOFT;
 #ifdef CONFIG_SYS_NAND_DBW_16
 	nand->options = NAND_BUSWIDTH_16;
 #endif
 	nand->cmd_ctrl = at91_nand_hwcontrol;
 #ifdef CONFIG_SYS_NAND_READY_PIN
 	nand->dev_ready = at91_nand_ready;
 #endif
 	nand->chip_delay = 20;

 #ifdef CONFIG_ATMEL_NAND_HWECC
 	nand->ecc.mode = NAND_ECC_HW;
 	nand->ecc.calculate = atmel_nand_calculate;
 	nand->ecc.correct = atmel_nand_correct;
 	nand->ecc.hwctl = atmel_nand_hwctl;
 	nand->ecc.read_page = atmel_nand_read_page;
 	nand->ecc.bytes = 4;
 #endif

 #ifdef CONFIG_ATMEL_NAND_HWECC
 	mtd = &nand_info[chip_nr++];
 	mtd->priv = nand;

 	/* Detect NAND chips */
 	if (nand_scan_ident(mtd, 1, NULL)) {
 		printk(KERN_WARNING "NAND Flash not found !\n");
 		return -ENXIO;
 	}

 	if (nand->ecc.mode == NAND_ECC_HW) {
 		/* ECC is calculated for the whole page (1 step) */
 		nand->ecc.size = mtd->writesize;

 		/* set ECC page size and oob layout */
 		switch (mtd->writesize) {
 		case 512:
 			nand->ecc.layout = &atmel_oobinfo_small;
 			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_528);
 			break;
 		case 1024:
 			nand->ecc.layout = &atmel_oobinfo_large;
 			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_1056);
 			break;
 		case 2048:
 			nand->ecc.layout = &atmel_oobinfo_large;
 			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_2112);
 			break;
 		case 4096:
 			nand->ecc.layout = &atmel_oobinfo_large;
 			ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_4224);
 			break;
 		default:
 			/* page size not handled by HW ECC */
 			/* switching back to soft ECC */
 			nand->ecc.mode = NAND_ECC_SOFT;
 			nand->ecc.calculate = NULL;
 			nand->ecc.correct = NULL;
 			nand->ecc.hwctl = NULL;
 			nand->ecc.read_page = NULL;
 			nand->ecc.postpad = 0;
 			nand->ecc.prepad = 0;
 			nand->ecc.bytes = 0;
 			break;
 		}
 	}
 #endif

 	return 0;
 }
	/*
	* (C) Copyright 2007-2008
	* Stelian Pop <stelian@popies.net>
	* Lead Tech Design <www.leadtechdesign.com>
	*
	* (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <asm/arch/hardware.h>
	#include <asm/arch/gpio.h>
	#include <asm/arch/at91_pio.h>

	#include <nand.h>

	#ifdef CONFIG_ATMEL_NAND_HWECC

	/* Register access macros */
	#define ecc_readl(add, reg) \
	readl(AT91_BASE_SYS + add + ATMEL_ECC_##reg)
	#define ecc_writel(add, reg, value) \
	writel((value), AT91_BASE_SYS + add + ATMEL_ECC_##reg)

	#include "atmel_nand_ecc.h" /* Hardware ECC registers */

	/* oob layout for large page size
	* bad block info is on bytes 0 and 1
	* the bytes have to be consecutives to avoid
	* several NAND_CMD_RNDOUT during read
	*/
	static struct nand_ecclayout atmel_oobinfo_large = {
	.eccbytes = 4,
	.eccpos = {60, 61, 62, 63},
	.oobfree = {
	{2, 58}
	},
	};

	/* oob layout for small page size
	* bad block info is on bytes 4 and 5
	* the bytes have to be consecutives to avoid
	* several NAND_CMD_RNDOUT during read
	*/
	static struct nand_ecclayout atmel_oobinfo_small = {
	.eccbytes = 4,
	.eccpos = {0, 1, 2, 3},
	.oobfree = {
	{6, 10}
	},
	};

	/*
	* Calculate HW ECC
	*
	* function called after a write
	*
	* mtd: MTD block structure
	* dat: raw data (unused)
	* ecc_code: buffer for ECC
	*/
	static int atmel_nand_calculate(struct mtd_info *mtd,
	const u_char dat, unsigned char ecc_code)
	{
	struct nand_chip *nand_chip = mtd->priv;
	unsigned int ecc_value;

	/* get the first 2 ECC bytes */
	ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR);

	ecc_code[0] = ecc_value & 0xFF;
	ecc_code[1] = (ecc_value >> 8) & 0xFF;

	/* get the last 2 ECC bytes */
	ecc_value = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, NPR) & ATMEL_ECC_NPARITY;

	ecc_code[2] = ecc_value & 0xFF;
	ecc_code[3] = (ecc_value >> 8) & 0xFF;

	return 0;
	}

	/*
	* HW ECC read page function
	*
	* mtd: mtd info structure
	* chip: nand chip info structure
	* buf: buffer to store read data
	*/
	static int atmel_nand_read_page(struct mtd_info *mtd,
	struct nand_chip chip, uint8_t buf, int page)
	{
	int eccsize = chip->ecc.size;
	int eccbytes = chip->ecc.bytes;
	uint32_t *eccpos = chip->ecc.layout->eccpos;
	uint8_t *p = buf;
	uint8_t *oob = chip->oob_poi;
	uint8_t *ecc_pos;
	int stat;

	/* read the page */
	chip->read_buf(mtd, p, eccsize);

	/* move to ECC position if needed */
	if (eccpos[0] != 0) {
	/* This only works on large pages
	* because the ECC controller waits for
	* NAND_CMD_RNDOUTSTART after the
	* NAND_CMD_RNDOUT.
	* anyway, for small pages, the eccpos[0] == 0
	*/
	chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
	mtd->writesize + eccpos[0], -1);
	}

	/* the ECC controller needs to read the ECC just after the data */
	ecc_pos = oob + eccpos[0];
	chip->read_buf(mtd, ecc_pos, eccbytes);

	/* check if there's an error */
	stat = chip->ecc.correct(mtd, p, oob, NULL);

	if (stat < 0)
	mtd->ecc_stats.failed++;
	else
	mtd->ecc_stats.corrected += stat;

	/* get back to oob start (end of page) */
	chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);

	/* read the oob */
	chip->read_buf(mtd, oob, mtd->oobsize);

	return 0;
	}

	/*
	* HW ECC Correction
	*
	* function called after a read
	*
	* mtd: MTD block structure
	* dat: raw data read from the chip
	* read_ecc: ECC from the chip (unused)
	* isnull: unused
	*
	* Detect and correct a 1 bit error for a page
	*/
	static int atmel_nand_correct(struct mtd_info mtd, u_char dat,
	u_char read_ecc, u_char isnull)
	{
	struct nand_chip *nand_chip = mtd->priv;
	unsigned int ecc_status, ecc_parity, ecc_mode;
	unsigned int ecc_word, ecc_bit;

	/* get the status from the Status Register */
	ecc_status = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, SR);

	/* if there's no error */
	if (likely(!(ecc_status & ATMEL_ECC_RECERR)))
	return 0;

	/* get error bit offset (4 bits) */
	ecc_bit = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_BITADDR;
	/* get word address (12 bits) */
	ecc_word = ecc_readl(CONFIG_SYS_NAND_ECC_BASE, PR) & ATMEL_ECC_WORDADDR;
	ecc_word >>= 4;

	/* if there are multiple errors */
	if (ecc_status & ATMEL_ECC_MULERR) {
	/* check if it is a freshly erased block
	* (filled with 0xff) */
	if ((ecc_bit == ATMEL_ECC_BITADDR)
	&& (ecc_word == (ATMEL_ECC_WORDADDR >> 4))) {
	/* the block has just been erased, return OK */
	return 0;
	}
	/* it doesn't seems to be a freshly
	* erased block.
	* We can't correct so many errors */
	printk(KERN_WARNING "atmel_nand : multiple errors detected."
	" Unable to correct.\n");
	return -EIO;
	}

	/* if there's a single bit error : we can correct it */
	if (ecc_status & ATMEL_ECC_ECCERR) {
	/* there's nothing much to do here.
	* the bit error is on the ECC itself.
	*/
	printk(KERN_WARNING "atmel_nand : one bit error on ECC code."
	" Nothing to correct\n");
	return 0;
	}

	printk(KERN_WARNING "atmel_nand : one bit error on data."
	" (word offset in the page :"
	" 0x%x bit offset : 0x%x)\n",
	ecc_word, ecc_bit);
	/* correct the error */
	if (nand_chip->options & NAND_BUSWIDTH_16) {
	/* 16 bits words */
	((unsigned short *) dat)[ecc_word] ^= (1 << ecc_bit);
	} else {
	/* 8 bits words */
	dat[ecc_word] ^= (1 << ecc_bit);
	}
	printk(KERN_WARNING "atmel_nand : error corrected\n");
	return 1;
	}

	/*
	* Enable HW ECC : unused on most chips
	*/
	static void atmel_nand_hwctl(struct mtd_info *mtd, int mode)
	{
	}
	#endif

	static void at91_nand_hwcontrol(struct mtd_info *mtd,
	int cmd, unsigned int ctrl)
	{
	struct nand_chip *this = mtd->priv;

	if (ctrl & NAND_CTRL_CHANGE) {
	ulong IO_ADDR_W = (ulong) this->IO_ADDR_W;
	IO_ADDR_W &= ~(CONFIG_SYS_NAND_MASK_ALE
	\| CONFIG_SYS_NAND_MASK_CLE);

	if (ctrl & NAND_CLE)
	IO_ADDR_W \|= CONFIG_SYS_NAND_MASK_CLE;
	if (ctrl & NAND_ALE)
	IO_ADDR_W \|= CONFIG_SYS_NAND_MASK_ALE;

	#ifdef CONFIG_SYS_NAND_ENABLE_PIN
	at91_set_gpio_value(CONFIG_SYS_NAND_ENABLE_PIN,
	!(ctrl & NAND_NCE));
	#endif
	this->IO_ADDR_W = (void *) IO_ADDR_W;
	}

	if (cmd != NAND_CMD_NONE)
	writeb(cmd, this->IO_ADDR_W);
	}

	#ifdef CONFIG_SYS_NAND_READY_PIN
	static int at91_nand_ready(struct mtd_info *mtd)
	{
	return at91_get_gpio_value(CONFIG_SYS_NAND_READY_PIN);
	}
	#endif

	int board_nand_init(struct nand_chip *nand)
	{
	#ifdef CONFIG_ATMEL_NAND_HWECC
	static int chip_nr = 0;
	struct mtd_info *mtd;
	#endif

	nand->ecc.mode = NAND_ECC_SOFT;
	#ifdef CONFIG_SYS_NAND_DBW_16
	nand->options = NAND_BUSWIDTH_16;
	#endif
	nand->cmd_ctrl = at91_nand_hwcontrol;
	#ifdef CONFIG_SYS_NAND_READY_PIN
	nand->dev_ready = at91_nand_ready;
	#endif
	nand->chip_delay = 20;

	#ifdef CONFIG_ATMEL_NAND_HWECC
	nand->ecc.mode = NAND_ECC_HW;
	nand->ecc.calculate = atmel_nand_calculate;
	nand->ecc.correct = atmel_nand_correct;
	nand->ecc.hwctl = atmel_nand_hwctl;
	nand->ecc.read_page = atmel_nand_read_page;
	nand->ecc.bytes = 4;
	#endif

	#ifdef CONFIG_ATMEL_NAND_HWECC
	mtd = &nand_info[chip_nr++];
	mtd->priv = nand;

	/* Detect NAND chips */
	if (nand_scan_ident(mtd, 1, NULL)) {
	printk(KERN_WARNING "NAND Flash not found !\n");
	return -ENXIO;
	}

	if (nand->ecc.mode == NAND_ECC_HW) {
	/* ECC is calculated for the whole page (1 step) */
	nand->ecc.size = mtd->writesize;

	/* set ECC page size and oob layout */
	switch (mtd->writesize) {
	case 512:
	nand->ecc.layout = &atmel_oobinfo_small;
	ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_528);
	break;
	case 1024:
	nand->ecc.layout = &atmel_oobinfo_large;
	ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_1056);
	break;
	case 2048:
	nand->ecc.layout = &atmel_oobinfo_large;
	ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_2112);
	break;
	case 4096:
	nand->ecc.layout = &atmel_oobinfo_large;
	ecc_writel(CONFIG_SYS_NAND_ECC_BASE, MR, ATMEL_ECC_PAGESIZE_4224);
	break;
	default:
	/* page size not handled by HW ECC */
	/* switching back to soft ECC */
	nand->ecc.mode = NAND_ECC_SOFT;
	nand->ecc.calculate = NULL;
	nand->ecc.correct = NULL;
	nand->ecc.hwctl = NULL;
	nand->ecc.read_page = NULL;
	nand->ecc.postpad = 0;
	nand->ecc.prepad = 0;
	nand->ecc.bytes = 0;
	break;
	}
	}
	#endif

	return 0;
	}