| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Marvell / Cavium Inc. CN73xx |
| */ |
| |
| /dts-v1/; |
| |
| / { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| soc0: soc@0 { |
| interrupt-parent = <&ciu3>; |
| compatible = "simple-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; /* Direct mapping */ |
| |
| ciu3: interrupt-controller@1010000000000 { |
| compatible = "cavium,octeon-7890-ciu3"; |
| interrupt-controller; |
| /* |
| * Interrupts are specified by two parts: |
| * 1) Source number (20 significant bits) |
| * 2) Trigger type: (4 == level, 1 == edge) |
| */ |
| #address-cells = <0>; |
| #interrupt-cells = <2>; |
| reg = <0x10100 0x00000000 0x0 0xb0000000>; |
| }; |
| |
| bootbus: bootbus@1180000000000 { |
| compatible = "cavium,octeon-3860-bootbus","simple-bus"; |
| reg = <0x11800 0x00000000 0x0 0x200>; |
| /* The chip select number and offset */ |
| #address-cells = <2>; |
| /* The size of the chip select region */ |
| #size-cells = <1>; |
| }; |
| |
| gpio: gpio-controller@1070000000800 { |
| #gpio-cells = <2>; |
| compatible = "cavium,octeon-7890-gpio"; |
| reg = <0x10700 0x00000800 0x0 0x100>; |
| gpio-controller; |
| nr-gpios = <32>; |
| /* Interrupts are specified by two parts: |
| * 1) GPIO pin number (0..15) |
| * 2) Triggering (1 - edge rising |
| * 2 - edge falling |
| * 4 - level active high |
| * 8 - level active low) |
| */ |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| /* The GPIO pins connect to 16 consecutive CUI bits */ |
| interrupts = <0x03000 4>, <0x03001 4>, |
| <0x03002 4>, <0x03003 4>, |
| <0x03004 4>, <0x03005 4>, |
| <0x03006 4>, <0x03007 4>, |
| <0x03008 4>, <0x03009 4>, |
| <0x0300a 4>, <0x0300b 4>, |
| <0x0300c 4>, <0x0300d 4>, |
| <0x0300e 4>, <0x0300f 4>; |
| }; |
| |
| reset: reset@1180006001600 { |
| compatible = "mrvl,cn7xxx-rst"; |
| reg = <0x11800 0x06001600 0x0 0x200>; |
| }; |
| |
| uart0: serial@1180000000800 { |
| compatible = "cavium,octeon-3860-uart","ns16550"; |
| reg = <0x11800 0x00000800 0x0 0x400>; |
| clock-frequency = <0>; |
| current-speed = <115200>; |
| reg-shift = <3>; |
| interrupts = <0x08000 4>; |
| }; |
| |
| uart1: serial@1180000000c00 { |
| compatible = "cavium,octeon-3860-uart","ns16550"; |
| reg = <0x11800 0x00000c00 0x0 0x400>; |
| clock-frequency = <0>; |
| current-speed = <115200>; |
| reg-shift = <3>; |
| interrupts = <0x08040 4>; |
| }; |
| |
| i2c0: i2c@1180000001000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "cavium,octeon-7890-twsi"; |
| reg = <0x11800 0x00001000 0x0 0x200>; |
| /* INT_ST, INT_TS, INT_CORE */ |
| interrupts = <0x0b000 1>, <0x0b001 1>, <0x0b002 1>; |
| clock-frequency = <100000>; |
| }; |
| |
| i2c1: i2c@1180000001200 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "cavium,octeon-7890-twsi"; |
| reg = <0x11800 0x00001200 0x0 0x200>; |
| /* INT_ST, INT_TS, INT_CORE */ |
| interrupts = <0x0b100 1>, <0x0b101 1>, <0x0b102 1>; |
| clock-frequency = <100000>; |
| }; |
| }; |
| }; |