blob: a1942ca2bd900b757dc9a9757b5b1afb7adf51c4 [file] [log] [blame]
/*
* Copyright 2009-2010 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*
*/
#ifndef _ASM_CONFIG_H_
#define _ASM_CONFIG_H_
#define CONFIG_LMB
#define CONFIG_SYS_BOOT_RAMDISK_HIGH
#define CONFIG_SYS_BOOT_GET_CMDLINE
#define CONFIG_SYS_BOOT_GET_KBD
#ifndef CONFIG_MAX_MEM_MAPPED
#if defined(CONFIG_4xx) || defined(CONFIG_E500) || defined(CONFIG_MPC86xx)
#define CONFIG_MAX_MEM_MAPPED ((phys_size_t)2 << 30)
#else
#define CONFIG_MAX_MEM_MAPPED (256 << 20)
#endif
#endif
/* Check if boards need to enable FSL DMA engine for SDRAM init */
#if !defined(CONFIG_FSL_DMA) && defined(CONFIG_DDR_ECC)
#if (defined(CONFIG_MPC83xx) && defined(CONFIG_DDR_ECC_INIT_VIA_DMA)) || \
((defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx)) && \
!defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER))
#define CONFIG_FSL_DMA
#endif
#endif
#if defined(CONFIG_MPC8572) || defined(CONFIG_P1020) || \
defined(CONFIG_P1021) || defined(CONFIG_P1022) || \
defined(CONFIG_P2020) || defined(CONFIG_MPC8641)
#define CONFIG_MAX_CPUS 2
#elif defined(CONFIG_PPC_P3041)
#define CONFIG_MAX_CPUS 4
#elif defined(CONFIG_PPC_P4080)
#define CONFIG_MAX_CPUS 8
#elif defined(CONFIG_PPC_P5020)
#define CONFIG_MAX_CPUS 2
#else
#define CONFIG_MAX_CPUS 1
#endif
/*
* Provide a default boot page translation virtual address that lines up with
* Freescale's default e500 reset page.
*/
#if (defined(CONFIG_E500) && defined(CONFIG_MP))
#ifndef CONFIG_BPTR_VIRT_ADDR
#define CONFIG_BPTR_VIRT_ADDR 0xfffff000
#endif
#endif
/* Enable TSEC2.0 for the platforms that have it if we are using TSEC */
#if defined(CONFIG_TSEC_ENET) && \
(defined(CONFIG_P1020) || defined(CONFIG_P1011))
#define CONFIG_TSECV2
#endif
/*
* SEC (crypto unit) major compatible version determination
*/
#if defined(CONFIG_FSL_CORENET)
#define CONFIG_SYS_FSL_SEC_COMPAT 4
#elif defined(CONFIG_MPC85xx) || defined(CONFIG_MPC83xx)
#define CONFIG_SYS_FSL_SEC_COMPAT 2
#endif
/* Number of TLB CAM entries we have on FSL Book-E chips */
#if defined(CONFIG_E500MC)
#define CONFIG_SYS_NUM_TLBCAMS 64
#elif defined(CONFIG_E500)
#define CONFIG_SYS_NUM_TLBCAMS 16
#endif
/* Relocation to SDRAM works on all PPC boards */
#define CONFIG_RELOC_FIXUP_WORKS
/* Since so many PPC SOCs have a semi-common LBC, define this here */
#if defined(CONFIG_MPC85xx) || defined(CONFIG_MPC86xx) || \
defined(CONFIG_MPC83xx)
#define CONFIG_FSL_LBC
#endif
/* All PPC boards must swap IDE bytes */
#define CONFIG_IDE_SWAP_IO
#endif /* _ASM_CONFIG_H_ */