| /* |
| * dfu.c -- DFU back-end routines |
| * |
| * Copyright (C) 2012 Samsung Electronics |
| * author: Lukasz Majewski <l.majewski@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <malloc.h> |
| #include <errno.h> |
| #include <div64.h> |
| #include <dfu.h> |
| #include <ext4fs.h> |
| #include <fat.h> |
| #include <mmc.h> |
| |
| static unsigned char *dfu_file_buf; |
| static long dfu_file_buf_len; |
| static long dfu_file_buf_filled; |
| |
| static int mmc_block_op(enum dfu_op op, struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| struct mmc *mmc; |
| u32 blk_start, blk_count, n = 0; |
| int ret, part_num_bkp = 0; |
| |
| mmc = find_mmc_device(dfu->data.mmc.dev_num); |
| if (!mmc) { |
| error("Device MMC %d - not found!", dfu->data.mmc.dev_num); |
| return -ENODEV; |
| } |
| |
| /* |
| * We must ensure that we work in lba_blk_size chunks, so ALIGN |
| * this value. |
| */ |
| *len = ALIGN(*len, dfu->data.mmc.lba_blk_size); |
| |
| blk_start = dfu->data.mmc.lba_start + |
| (u32)lldiv(offset, dfu->data.mmc.lba_blk_size); |
| blk_count = *len / dfu->data.mmc.lba_blk_size; |
| if (blk_start + blk_count > |
| dfu->data.mmc.lba_start + dfu->data.mmc.lba_size) { |
| puts("Request would exceed designated area!\n"); |
| return -EINVAL; |
| } |
| |
| if (dfu->data.mmc.hw_partition >= 0) { |
| part_num_bkp = mmc->block_dev.hwpart; |
| ret = mmc_select_hwpart(dfu->data.mmc.dev_num, |
| dfu->data.mmc.hw_partition); |
| if (ret) |
| return ret; |
| } |
| |
| debug("%s: %s dev: %d start: %d cnt: %d buf: 0x%p\n", __func__, |
| op == DFU_OP_READ ? "MMC READ" : "MMC WRITE", |
| dfu->data.mmc.dev_num, blk_start, blk_count, buf); |
| switch (op) { |
| case DFU_OP_READ: |
| n = mmc->block_dev.block_read(&mmc->block_dev, blk_start, |
| blk_count, buf); |
| break; |
| case DFU_OP_WRITE: |
| n = mmc->block_dev.block_write(&mmc->block_dev, blk_start, |
| blk_count, buf); |
| break; |
| default: |
| error("Operation not supported\n"); |
| } |
| |
| if (n != blk_count) { |
| error("MMC operation failed"); |
| if (dfu->data.mmc.hw_partition >= 0) |
| mmc_select_hwpart(dfu->data.mmc.dev_num, part_num_bkp); |
| return -EIO; |
| } |
| |
| if (dfu->data.mmc.hw_partition >= 0) { |
| ret = mmc_select_hwpart(dfu->data.mmc.dev_num, part_num_bkp); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int mmc_file_buffer(struct dfu_entity *dfu, void *buf, long *len) |
| { |
| if (dfu_file_buf_len + *len > CONFIG_SYS_DFU_MAX_FILE_SIZE) { |
| dfu_file_buf_len = 0; |
| return -EINVAL; |
| } |
| |
| /* Add to the current buffer. */ |
| memcpy(dfu_file_buf + dfu_file_buf_len, buf, *len); |
| dfu_file_buf_len += *len; |
| |
| return 0; |
| } |
| |
| static int mmc_file_op(enum dfu_op op, struct dfu_entity *dfu, |
| void *buf, long *len) |
| { |
| const char *fsname, *opname; |
| char cmd_buf[DFU_CMD_BUF_SIZE]; |
| char *str_env; |
| int ret; |
| |
| switch (dfu->layout) { |
| case DFU_FS_FAT: |
| fsname = "fat"; |
| break; |
| case DFU_FS_EXT4: |
| fsname = "ext4"; |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| return -1; |
| } |
| |
| switch (op) { |
| case DFU_OP_READ: |
| opname = "load"; |
| break; |
| case DFU_OP_WRITE: |
| opname = "write"; |
| break; |
| case DFU_OP_SIZE: |
| opname = "size"; |
| break; |
| default: |
| return -1; |
| } |
| |
| sprintf(cmd_buf, "%s%s mmc %d:%d", fsname, opname, |
| dfu->data.mmc.dev, dfu->data.mmc.part); |
| |
| if (op != DFU_OP_SIZE) |
| sprintf(cmd_buf + strlen(cmd_buf), " %p", buf); |
| |
| sprintf(cmd_buf + strlen(cmd_buf), " %s", dfu->name); |
| |
| if (op == DFU_OP_WRITE) |
| sprintf(cmd_buf + strlen(cmd_buf), " %lx", *len); |
| |
| debug("%s: %s 0x%p\n", __func__, cmd_buf, cmd_buf); |
| |
| ret = run_command(cmd_buf, 0); |
| if (ret) { |
| puts("dfu: Read error!\n"); |
| return ret; |
| } |
| |
| if (op != DFU_OP_WRITE) { |
| str_env = getenv("filesize"); |
| if (str_env == NULL) { |
| puts("dfu: Wrong file size!\n"); |
| return -1; |
| } |
| *len = simple_strtoul(str_env, NULL, 16); |
| } |
| |
| return ret; |
| } |
| |
| int dfu_write_medium_mmc(struct dfu_entity *dfu, |
| u64 offset, void *buf, long *len) |
| { |
| int ret = -1; |
| |
| switch (dfu->layout) { |
| case DFU_RAW_ADDR: |
| ret = mmc_block_op(DFU_OP_WRITE, dfu, offset, buf, len); |
| break; |
| case DFU_FS_FAT: |
| case DFU_FS_EXT4: |
| ret = mmc_file_buffer(dfu, buf, len); |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| } |
| |
| return ret; |
| } |
| |
| int dfu_flush_medium_mmc(struct dfu_entity *dfu) |
| { |
| int ret = 0; |
| |
| if (dfu->layout != DFU_RAW_ADDR) { |
| /* Do stuff here. */ |
| ret = mmc_file_op(DFU_OP_WRITE, dfu, dfu_file_buf, |
| &dfu_file_buf_len); |
| |
| /* Now that we're done */ |
| dfu_file_buf_len = 0; |
| } |
| |
| return ret; |
| } |
| |
| long dfu_get_medium_size_mmc(struct dfu_entity *dfu) |
| { |
| int ret; |
| long len; |
| |
| switch (dfu->layout) { |
| case DFU_RAW_ADDR: |
| return dfu->data.mmc.lba_size * dfu->data.mmc.lba_blk_size; |
| case DFU_FS_FAT: |
| case DFU_FS_EXT4: |
| dfu_file_buf_filled = -1; |
| ret = mmc_file_op(DFU_OP_SIZE, dfu, NULL, &len); |
| if (ret < 0) |
| return ret; |
| if (len > CONFIG_SYS_DFU_MAX_FILE_SIZE) |
| return -1; |
| return len; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| return -1; |
| } |
| } |
| |
| static int mmc_file_unbuffer(struct dfu_entity *dfu, u64 offset, void *buf, |
| long *len) |
| { |
| int ret; |
| long file_len; |
| |
| if (dfu_file_buf_filled == -1) { |
| ret = mmc_file_op(DFU_OP_READ, dfu, dfu_file_buf, &file_len); |
| if (ret < 0) |
| return ret; |
| dfu_file_buf_filled = file_len; |
| } |
| if (offset + *len > dfu_file_buf_filled) |
| return -EINVAL; |
| |
| /* Add to the current buffer. */ |
| memcpy(buf, dfu_file_buf + offset, *len); |
| |
| return 0; |
| } |
| |
| int dfu_read_medium_mmc(struct dfu_entity *dfu, u64 offset, void *buf, |
| long *len) |
| { |
| int ret = -1; |
| |
| switch (dfu->layout) { |
| case DFU_RAW_ADDR: |
| ret = mmc_block_op(DFU_OP_READ, dfu, offset, buf, len); |
| break; |
| case DFU_FS_FAT: |
| case DFU_FS_EXT4: |
| ret = mmc_file_unbuffer(dfu, offset, buf, len); |
| break; |
| default: |
| printf("%s: Layout (%s) not (yet) supported!\n", __func__, |
| dfu_get_layout(dfu->layout)); |
| } |
| |
| return ret; |
| } |
| |
| void dfu_free_entity_mmc(struct dfu_entity *dfu) |
| { |
| if (dfu_file_buf) { |
| free(dfu_file_buf); |
| dfu_file_buf = NULL; |
| } |
| } |
| |
| /* |
| * @param s Parameter string containing space-separated arguments: |
| * 1st: |
| * raw (raw read/write) |
| * fat (files) |
| * ext4 (^) |
| * part (partition image) |
| * 2nd and 3rd: |
| * lba_start and lba_size, for raw write |
| * mmc_dev and mmc_part, for filesystems and part |
| * 4th (optional): |
| * mmcpart <num> (access to HW eMMC partitions) |
| */ |
| int dfu_fill_entity_mmc(struct dfu_entity *dfu, char *devstr, char *s) |
| { |
| const char *entity_type; |
| size_t second_arg; |
| size_t third_arg; |
| |
| struct mmc *mmc; |
| |
| const char *argv[3]; |
| const char **parg = argv; |
| |
| dfu->data.mmc.dev_num = simple_strtoul(devstr, NULL, 10); |
| |
| for (; parg < argv + sizeof(argv) / sizeof(*argv); ++parg) { |
| *parg = strsep(&s, " "); |
| if (*parg == NULL) { |
| error("Invalid number of arguments.\n"); |
| return -ENODEV; |
| } |
| } |
| |
| entity_type = argv[0]; |
| /* |
| * Base 0 means we'll accept (prefixed with 0x or 0) base 16, 8, |
| * with default 10. |
| */ |
| second_arg = simple_strtoul(argv[1], NULL, 0); |
| third_arg = simple_strtoul(argv[2], NULL, 0); |
| |
| mmc = find_mmc_device(dfu->data.mmc.dev_num); |
| if (mmc == NULL) { |
| error("Couldn't find MMC device no. %d.\n", |
| dfu->data.mmc.dev_num); |
| return -ENODEV; |
| } |
| |
| if (mmc_init(mmc)) { |
| error("Couldn't init MMC device.\n"); |
| return -ENODEV; |
| } |
| |
| dfu->data.mmc.hw_partition = -EINVAL; |
| if (!strcmp(entity_type, "raw")) { |
| dfu->layout = DFU_RAW_ADDR; |
| dfu->data.mmc.lba_start = second_arg; |
| dfu->data.mmc.lba_size = third_arg; |
| dfu->data.mmc.lba_blk_size = mmc->read_bl_len; |
| |
| /* |
| * Check for an extra entry at dfu_alt_info env variable |
| * specifying the mmc HW defined partition number |
| */ |
| if (s) |
| if (!strcmp(strsep(&s, " "), "mmcpart")) |
| dfu->data.mmc.hw_partition = |
| simple_strtoul(s, NULL, 0); |
| |
| } else if (!strcmp(entity_type, "part")) { |
| disk_partition_t partinfo; |
| struct blk_desc *blk_dev = &mmc->block_dev; |
| int mmcdev = second_arg; |
| int mmcpart = third_arg; |
| |
| if (part_get_info(blk_dev, mmcpart, &partinfo) != 0) { |
| error("Couldn't find part #%d on mmc device #%d\n", |
| mmcpart, mmcdev); |
| return -ENODEV; |
| } |
| |
| dfu->layout = DFU_RAW_ADDR; |
| dfu->data.mmc.lba_start = partinfo.start; |
| dfu->data.mmc.lba_size = partinfo.size; |
| dfu->data.mmc.lba_blk_size = partinfo.blksz; |
| } else if (!strcmp(entity_type, "fat")) { |
| dfu->layout = DFU_FS_FAT; |
| } else if (!strcmp(entity_type, "ext4")) { |
| dfu->layout = DFU_FS_EXT4; |
| } else { |
| error("Memory layout (%s) not supported!\n", entity_type); |
| return -ENODEV; |
| } |
| |
| /* if it's NOT a raw write */ |
| if (strcmp(entity_type, "raw")) { |
| dfu->data.mmc.dev = second_arg; |
| dfu->data.mmc.part = third_arg; |
| } |
| |
| dfu->dev_type = DFU_DEV_MMC; |
| dfu->get_medium_size = dfu_get_medium_size_mmc; |
| dfu->read_medium = dfu_read_medium_mmc; |
| dfu->write_medium = dfu_write_medium_mmc; |
| dfu->flush_medium = dfu_flush_medium_mmc; |
| dfu->inited = 0; |
| dfu->free_entity = dfu_free_entity_mmc; |
| |
| /* Check if file buffer is ready */ |
| if (!dfu_file_buf) { |
| dfu_file_buf = memalign(CONFIG_SYS_CACHELINE_SIZE, |
| CONFIG_SYS_DFU_MAX_FILE_SIZE); |
| if (!dfu_file_buf) { |
| error("Could not memalign 0x%x bytes", |
| CONFIG_SYS_DFU_MAX_FILE_SIZE); |
| return -ENOMEM; |
| } |
| } |
| |
| return 0; |
| } |