| # |
| # Copyright (C) 2012 Samsung Electronics |
| # |
| # Lukasz Majewski <l.majewski@samsung.com> |
| # |
| # |
| # SPDX-License-Identifier: GPL-2.0+ |
| |
| Glossary: |
| ======== |
| - UUID -(Universally Unique Identifier) |
| - GUID - (Globally Unique ID) |
| - EFI - (Extensible Firmware Interface) |
| - UEFI - (Unified EFI) - EFI evolution |
| - GPT (GUID Partition Table) - it is the EFI standard part |
| - partitions - lists of available partitions (defined at u-boot): |
| ./include/configs/{target}.h |
| |
| Introduction: |
| ============= |
| This document describes the GPT partition table format and usage of |
| the gpt command in u-boot. |
| |
| UUID introduction: |
| ==================== |
| |
| GPT for marking disks/partitions is using the UUID. It is supposed to be a |
| globally unique value. A UUID is a 16-byte (128-bit) number. The number of |
| theoretically possible UUIDs is therefore about 3 x 10^38. |
| More often UUID is displayed as 32 hexadecimal digits, in 5 groups, |
| separated by hyphens, in the form 8-4-4-4-12 for a total of 36 characters |
| (32 digits and 4 hyphens) |
| |
| For instance, GUID of Basic data partition: EBD0A0A2-B9E5-4433-87C0-68B6B72699C7 |
| and GUID of Linux filesystem data: 0FC63DAF-8483-4772-8E79-3D69D8477DE4 |
| |
| Historically there are 5 methods to generate this number. The oldest one is |
| combining machine's MAC address and timer (epoch) value. |
| |
| Successive versions are using MD5 hash, random numbers and SHA-1 hash. All major |
| OSes and programming languages are providing libraries to compute UUID (e.g. |
| uuid command line tool). |
| |
| GPT brief explanation: |
| ====================== |
| |
| Layout: |
| ------- |
| |
| -------------------------------------------------- |
| LBA 0 |Protective MBR | |
| ---------------------------------------------------------- |
| LBA 1 |Primary GPT Header | Primary |
| -------------------------------------------------- GPT |
| LBA 2 |Entry 1|Entry 2| Entry 3| Entry 4| |
| -------------------------------------------------- |
| LBA 3 |Entries 5 - 128 | |
| | | |
| | | |
| ---------------------------------------------------------- |
| LBA 34 |Partition 1 | |
| | | |
| ----------------------------------- |
| |Partition 2 | |
| | | |
| ----------------------------------- |
| |Partition n | |
| | | |
| ---------------------------------------------------------- |
| LBA -34 |Entry 1|Entry 2| Entry 3| Entry 4| Backup |
| -------------------------------------------------- GPT |
| LBA -33 |Entries 5 - 128 | |
| | | |
| | | |
| LBA -2 | | |
| -------------------------------------------------- |
| LBA -1 |Backup GPT Header | |
| ---------------------------------------------------------- |
| |
| For a legacy reasons, GPT's LBA 0 sector has a MBR structure. It is called |
| "protective MBR". |
| Its first partition entry ID has 0xEE value, and disk software, which is not |
| handling the GPT sees it as a storage device without free space. |
| |
| It is possible to define 128 linearly placed partition entries. |
| |
| "LBA -1" means the last addressable block (in the mmc subsystem: |
| "dev_desc->lba - 1") |
| |
| Primary/Backup GPT header: |
| ---------------------------- |
| Offset Size Description |
| |
| 0 8 B Signature ("EFI PART", 45 46 49 20 50 41 52 54) |
| 8 4 B Revision (For version 1.0, the value is 00 00 01 00) |
| 12 4 B Header size (in bytes, usually 5C 00 00 00 meaning 92 bytes) |
| 16 4 B CRC32 of header (0 to header size), with this field zeroed |
| during calculation |
| 20 4 B Reserved (ZERO); |
| 24 8 B Current LBA (location of this header copy) |
| 32 8 B Backup LBA (location of the other header copy) |
| 40 8 B First usable LBA for partitions (primary partition table last |
| LBA + 1) |
| 48 8 B Last usable LBA (secondary partition table first LBA - 1) |
| 56 16 B Disk GUID (also referred as UUID on UNIXes) |
| 72 8 B Partition entries starting LBA (always 2 in primary copy) |
| 80 4 B Number of partition entries |
| 84 4 B Size of a partition entry (usually 128) |
| 88 4 B CRC32 of partition array |
| 92 * Reserved; must be ZERO (420 bytes for a 512-byte LBA) |
| |
| TOTAL: 512 B |
| |
| |
| IMPORTANT: |
| |
| GPT headers and partition entries are protected by CRC32 (the POSIX CRC32). |
| |
| Primary GPT header and Backup GPT header have swapped values of "Current LBA" |
| and "Backup LBA" and therefore different CRC32 check-sum. |
| |
| CRC32 for GPT headers (field "CRC of header") are calculated up till |
| "Header size" (92), NOT 512 bytes. |
| |
| CRC32 for partition entries (field "CRC32 of partition array") is calculated for |
| the whole array entry ( Number_of_partition_entries * |
| sizeof(partition_entry_size (usually 128))) |
| |
| Observe, how Backup GPT is placed in the memory. It is NOT a mirror reflect |
| of the Primary. |
| |
| Partition Entry Format: |
| ---------------------- |
| Offset Size Description |
| |
| 0 16 B Partition type GUID (Big Endian) |
| 16 16 B Unique partition GUID in (Big Endian) |
| 32 8 B First LBA (Little Endian) |
| 40 8 B Last LBA (inclusive) |
| 48 8 B Attribute flags [+] |
| 56 72 B Partition name (text) |
| |
| Attribute flags: |
| Bit 0 - System partition |
| Bit 1 - Hide from EFI |
| Bit 2 - Legacy BIOS bootable |
| Bit 48-63 - Defined and used by the individual partition type |
| For Basic data partition : |
| Bit 60 - Read-only |
| Bit 62 - Hidden |
| Bit 63 - Not mount |
| |
| Creating GPT partitions in U-Boot: |
| ============== |
| |
| To restore GUID partition table one needs to: |
| 1. Define partition layout in the environment. |
| Format of partitions layout: |
| "partitions=uuid_disk=...;name=u-boot,size=60MiB,uuid=...; |
| name=kernel,size=60MiB,uuid=...;" |
| or |
| "partitions=uuid_disk=${uuid_gpt_disk};name=${uboot_name}, |
| size=${uboot_size},uuid=${uboot_uuid};" |
| |
| The fields 'name' and 'size' are mandatory for every partition. |
| The field 'start' is optional. |
| |
| If field 'size' of the last partition is 0, the partiton is extended |
| up to the end of the device. |
| |
| The fields 'uuid' and 'uuid_disk' are optional if CONFIG_RANDOM_UUID is |
| enabled. A random uuid will be used if omitted or they point to an empty/ |
| non-existent environment variable. The environment variable will be set to |
| the generated UUID. |
| |
| The field 'bootable' is optional, it is used to mark the GPT partition |
| bootable (set attribute flags "Legacy BIOS bootable"). |
| "name=u-boot,size=60MiB;name=boot,size=60Mib,bootable;name=rootfs,size=0" |
| It can be used to locate bootable disks with command |
| "part list <interface> <dev> -bootable <varname>", |
| please check out doc/README.distro for use. |
| |
| 2. Define 'CONFIG_EFI_PARTITION' and 'CONFIG_CMD_GPT' |
| |
| 3. From u-boot prompt type: |
| gpt write mmc 0 $partitions |
| |
| Checking (validating) GPT partitions in U-Boot: |
| =============================================== |
| |
| Procedure is the same as above. The only change is at point 3. |
| |
| At u-boot prompt one needs to write: |
| gpt verify mmc 0 [$partitions] |
| |
| where [$partitions] is an optional parameter. |
| |
| When it is not provided, only basic checks based on CRC32 calculation for GPT |
| header and PTEs are performed. |
| When provided, additionally partition data - name, size and starting |
| offset (last two in LBA) - are compared with data defined in '$partitions' |
| environment variable. |
| |
| After running this command, return code is set to 0 if no errors found in |
| on non-volatile medium stored GPT. |
| |
| Following line can be used to assess if GPT verification has succeed: |
| |
| U-BOOT> gpt verify mmc 0 $partitions |
| U-BOOT> if test $? = 0; then echo "GPT OK"; else echo "GPT ERR"; fi |
| |
| |
| Partition type GUID: |
| ==================== |
| |
| For created partition, the used partition type GUID is |
| PARTITION_BASIC_DATA_GUID (EBD0A0A2-B9E5-4433-87C0-68B6B72699C7). |
| |
| If you define 'CONFIG_PARTITION_TYPE_GUID', a optionnal parameter 'type' |
| can specify a other partition type guid: |
| |
| "partitions=uuid_disk=...;name=u-boot,size=60MiB,uuid=...; |
| name=kernel,size=60MiB,uuid=..., |
| type=0FC63DAF-8483-4772-8E79-3D69D8477DE4;" |
| |
| Some strings can be also used at the place of known GUID : |
| "system" = PARTITION_SYSTEM_GUID |
| (C12A7328-F81F-11D2-BA4B-00A0C93EC93B) |
| "mbr" = LEGACY_MBR_PARTITION_GUID |
| (024DEE41-33E7-11D3-9D69-0008C781F39F) |
| "msft" = PARTITION_MSFT_RESERVED_GUID |
| (E3C9E316-0B5C-4DB8-817D-F92DF00215AE) |
| "data" = PARTITION_BASIC_DATA_GUID |
| (EBD0A0A2-B9E5-4433-87C0-68B6B72699C7) |
| "linux" = PARTITION_LINUX_FILE_SYSTEM_DATA_GUID |
| (0FC63DAF-8483-4772-8E79-3D69D8477DE4) |
| "raid" = PARTITION_LINUX_RAID_GUID |
| (A19D880F-05FC-4D3B-A006-743F0F84911E) |
| "swap" = PARTITION_LINUX_SWAP_GUID |
| (0657FD6D-A4AB-43C4-84E5-0933C84B4F4F) |
| "lvm" = PARTITION_LINUX_LVM_GUID |
| (E6D6D379-F507-44C2-A23C-238F2A3DF928) |
| |
| "partitions=uuid_disk=...;name=u-boot,size=60MiB,uuid=...; |
| name=kernel,size=60MiB,uuid=...,type=linux;" |
| |
| They are also used to display the type of partition in "part list" command. |
| |
| |
| Useful info: |
| ============ |
| |
| Two programs, namely: 'gdisk' and 'parted' are recommended to work with GPT |
| recovery. Both are able to handle GUID partitions. |
| Please, pay attention at -l switch for parted. |
| |
| "uuid" program is recommended to generate UUID string. Moreover it can decode |
| (-d switch) passed in UUID string. It can be used to generate partitions UUID |
| passed to u-boot environment variables. |
| If optional CONFIG_RANDOM_UUID is defined then for any partition which environment |
| uuid is unset, uuid is randomly generated and stored in correspond environment |
| variable. |
| |
| note: |
| Each string block of UUID generated by program "uuid" is in big endian and it is |
| also stored in big endian in disk GPT. |
| Partitions layout can be printed by typing "mmc part". Note that each partition |
| GUID has different byte order than UUID generated before, this is because first |
| three blocks of GUID string are in Little Endian. |