| /* |
| * (C) Copyright 2006 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __YUCCA_H_ |
| #define __YUCCA_H_ |
| |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| /*----------------------------------------------------------------------------+ |
| | Defines |
| +----------------------------------------------------------------------------*/ |
| |
| #define TMR_FREQ_EXT 25000000 |
| #define BOARD_UART_CLOCK 11059200 |
| |
| #define BOARD_OPTION_SELECTED 1 |
| #define BOARD_OPTION_NOT_SELECTED 0 |
| |
| #define ENGINEERING_CLOCK_CHECKING "clk_chk" |
| #define ENGINEERING_EXTERNAL_CLOCK "ext_clk" |
| |
| #define ENGINEERING_CLOCK_CHECKING_DATA 1 |
| #define ENGINEERING_EXTERNAL_CLOCK_DATA 2 |
| |
| /* ethernet definition */ |
| #define MAX_ENETMODE_PARM 3 |
| #define ENETMODE_NEG 0 |
| #define ENETMODE_SPEED 1 |
| #define ENETMODE_DUPLEX 2 |
| |
| #define ENETMODE_AUTONEG 0 |
| #define ENETMODE_NO_AUTONEG 1 |
| #define ENETMODE_10 2 |
| #define ENETMODE_100 3 |
| #define ENETMODE_1000 4 |
| #define ENETMODE_HALF 5 |
| #define ENETMODE_FULL 6 |
| |
| #define NUM_TLB_ENTRIES 64 |
| |
| /* MICRON SPD JEDEC ID Code (first byte) - SPD data byte [64] */ |
| #define MICRON_SPD_JEDEC_ID 0x2c |
| |
| /*----------------------------------------------------------------------------+ |
| | TLB specific defines. |
| +----------------------------------------------------------------------------*/ |
| #define TLB_256MB_ALIGN_MASK 0xF0000000 |
| #define TLB_16MB_ALIGN_MASK 0xFF000000 |
| #define TLB_1MB_ALIGN_MASK 0xFFF00000 |
| #define TLB_256KB_ALIGN_MASK 0xFFFC0000 |
| #define TLB_64KB_ALIGN_MASK 0xFFFF0000 |
| #define TLB_16KB_ALIGN_MASK 0xFFFFC000 |
| #define TLB_4KB_ALIGN_MASK 0xFFFFF000 |
| #define TLB_1KB_ALIGN_MASK 0xFFFFFC00 |
| #define TLB_256MB_SIZE 0x10000000 |
| #define TLB_16MB_SIZE 0x01000000 |
| #define TLB_1MB_SIZE 0x00100000 |
| #define TLB_256KB_SIZE 0x00040000 |
| #define TLB_64KB_SIZE 0x00010000 |
| #define TLB_16KB_SIZE 0x00004000 |
| #define TLB_4KB_SIZE 0x00001000 |
| #define TLB_1KB_SIZE 0x00000400 |
| |
| #define TLB_WORD0_EPN_MASK 0xFFFFFC00 |
| #define TLB_WORD0_EPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| #define TLB_WORD0_EPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| #define TLB_WORD0_V_MASK 0x00000200 |
| #define TLB_WORD0_V_ENABLE 0x00000200 |
| #define TLB_WORD0_V_DISABLE 0x00000000 |
| #define TLB_WORD0_TS_MASK 0x00000100 |
| #define TLB_WORD0_TS_1 0x00000100 |
| #define TLB_WORD0_TS_0 0x00000000 |
| #define TLB_WORD0_SIZE_MASK 0x000000F0 |
| #define TLB_WORD0_SIZE_1KB 0x00000000 |
| #define TLB_WORD0_SIZE_4KB 0x00000010 |
| #define TLB_WORD0_SIZE_16KB 0x00000020 |
| #define TLB_WORD0_SIZE_64KB 0x00000030 |
| #define TLB_WORD0_SIZE_256KB 0x00000040 |
| #define TLB_WORD0_SIZE_1MB 0x00000050 |
| #define TLB_WORD0_SIZE_16MB 0x00000070 |
| #define TLB_WORD0_SIZE_256MB 0x00000090 |
| #define TLB_WORD0_TPAR_MASK 0x0000000F |
| #define TLB_WORD0_TPAR_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) |
| #define TLB_WORD0_TPAR_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) |
| |
| #define TLB_WORD1_RPN_MASK 0xFFFFFC00 |
| #define TLB_WORD1_RPN_ENCODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| #define TLB_WORD1_RPN_DECODE(n) (((unsigned long)(n))&0xFFFFFC00) |
| #define TLB_WORD1_PAR1_MASK 0x00000300 |
| #define TLB_WORD1_PAR1_ENCODE(n) ((((unsigned long)(n))&0x03)<<8) |
| #define TLB_WORD1_PAR1_DECODE(n) ((((unsigned long)(n))>>8)&0x03) |
| #define TLB_WORD1_PAR1_0 0x00000000 |
| #define TLB_WORD1_PAR1_1 0x00000100 |
| #define TLB_WORD1_PAR1_2 0x00000200 |
| #define TLB_WORD1_PAR1_3 0x00000300 |
| #define TLB_WORD1_ERPN_MASK 0x0000000F |
| #define TLB_WORD1_ERPN_ENCODE(n) ((((unsigned long)(n))&0x0F)<<0) |
| #define TLB_WORD1_ERPN_DECODE(n) ((((unsigned long)(n))>>0)&0x0F) |
| |
| #define TLB_WORD2_PAR2_MASK 0xC0000000 |
| #define TLB_WORD2_PAR2_ENCODE(n) ((((unsigned long)(n))&0x03)<<30) |
| #define TLB_WORD2_PAR2_DECODE(n) ((((unsigned long)(n))>>30)&0x03) |
| #define TLB_WORD2_PAR2_0 0x00000000 |
| #define TLB_WORD2_PAR2_1 0x40000000 |
| #define TLB_WORD2_PAR2_2 0x80000000 |
| #define TLB_WORD2_PAR2_3 0xC0000000 |
| #define TLB_WORD2_U0_MASK 0x00008000 |
| #define TLB_WORD2_U0_ENABLE 0x00008000 |
| #define TLB_WORD2_U0_DISABLE 0x00000000 |
| #define TLB_WORD2_U1_MASK 0x00004000 |
| #define TLB_WORD2_U1_ENABLE 0x00004000 |
| #define TLB_WORD2_U1_DISABLE 0x00000000 |
| #define TLB_WORD2_U2_MASK 0x00002000 |
| #define TLB_WORD2_U2_ENABLE 0x00002000 |
| #define TLB_WORD2_U2_DISABLE 0x00000000 |
| #define TLB_WORD2_U3_MASK 0x00001000 |
| #define TLB_WORD2_U3_ENABLE 0x00001000 |
| #define TLB_WORD2_U3_DISABLE 0x00000000 |
| #define TLB_WORD2_W_MASK 0x00000800 |
| #define TLB_WORD2_W_ENABLE 0x00000800 |
| #define TLB_WORD2_W_DISABLE 0x00000000 |
| #define TLB_WORD2_I_MASK 0x00000400 |
| #define TLB_WORD2_I_ENABLE 0x00000400 |
| #define TLB_WORD2_I_DISABLE 0x00000000 |
| #define TLB_WORD2_M_MASK 0x00000200 |
| #define TLB_WORD2_M_ENABLE 0x00000200 |
| #define TLB_WORD2_M_DISABLE 0x00000000 |
| #define TLB_WORD2_G_MASK 0x00000100 |
| #define TLB_WORD2_G_ENABLE 0x00000100 |
| #define TLB_WORD2_G_DISABLE 0x00000000 |
| #define TLB_WORD2_E_MASK 0x00000080 |
| #define TLB_WORD2_E_ENABLE 0x00000080 |
| #define TLB_WORD2_E_DISABLE 0x00000000 |
| #define TLB_WORD2_UX_MASK 0x00000020 |
| #define TLB_WORD2_UX_ENABLE 0x00000020 |
| #define TLB_WORD2_UX_DISABLE 0x00000000 |
| #define TLB_WORD2_UW_MASK 0x00000010 |
| #define TLB_WORD2_UW_ENABLE 0x00000010 |
| #define TLB_WORD2_UW_DISABLE 0x00000000 |
| #define TLB_WORD2_UR_MASK 0x00000008 |
| #define TLB_WORD2_UR_ENABLE 0x00000008 |
| #define TLB_WORD2_UR_DISABLE 0x00000000 |
| #define TLB_WORD2_SX_MASK 0x00000004 |
| #define TLB_WORD2_SX_ENABLE 0x00000004 |
| #define TLB_WORD2_SX_DISABLE 0x00000000 |
| #define TLB_WORD2_SW_MASK 0x00000002 |
| #define TLB_WORD2_SW_ENABLE 0x00000002 |
| #define TLB_WORD2_SW_DISABLE 0x00000000 |
| #define TLB_WORD2_SR_MASK 0x00000001 |
| #define TLB_WORD2_SR_ENABLE 0x00000001 |
| #define TLB_WORD2_SR_DISABLE 0x00000000 |
| |
| /*----------------------------------------------------------------------------+ |
| | Board specific defines. |
| +----------------------------------------------------------------------------*/ |
| #define NONCACHE_MEMORY_SIZE (64*1024) |
| #define NONCACHE_AREA0_ENDOFFSET (64*1024) |
| #define NONCACHE_AREA1_ENDOFFSET (32*1024) |
| |
| #define FLASH_SECTORSIZE 0x00010000 |
| |
| /* SDRAM MICRON */ |
| #define SDRAM_MICRON 0x2C |
| |
| #define SDRAM_TRUE 1 |
| #define SDRAM_FALSE 0 |
| #define SDRAM_DDR1 1 |
| #define SDRAM_DDR2 2 |
| #define SDRAM_NONE 0 |
| #define MAXDIMMS 2 /* Changes le 12/01/05 pour 1.6 */ |
| #define MAXRANKS 4 /* Changes le 12/01/05 pour 1.6 */ |
| #define MAXBANKSPERDIMM 2 |
| #define MAXRANKSPERDIMM 2 |
| #define MAXBXCF 4 /* Changes le 12/01/05 pour 1.6 */ |
| #define MAXSDRAMMEMORY 0xFFFFFFFF /* 4GB */ |
| #define ERROR_STR_LENGTH 256 |
| #define MAX_SPD_BYTES 256 /* Max number of bytes on the DIMM's SPD EEPROM */ |
| |
| /*----------------------------------------------------------------------------+ |
| | SDR Configuration registers |
| +----------------------------------------------------------------------------*/ |
| /* Serial Device Strap Reg 0 */ |
| #define sdr_pstrp0 0x0040 |
| |
| #define SDR0_SDSTP1_EBC_ROM_BS_MASK 0x00000080 /* EBC Boot bus width Mask */ |
| #define SDR0_SDSTP1_EBC_ROM_BS_16BIT 0x00000080 /* EBC 16 Bits */ |
| #define SDR0_SDSTP1_EBC_ROM_BS_8BIT 0x00000000 /* EBC 8 Bits */ |
| |
| #define SDR0_SDSTP1_BOOT_SEL_MASK 0x00080000 /* Boot device Selection Mask */ |
| #define SDR0_SDSTP1_BOOT_SEL_EBC 0x00000000 /* EBC */ |
| #define SDR0_SDSTP1_BOOT_SEL_PCI 0x00080000 /* PCI */ |
| |
| #define SDR0_SDSTP1_EBC_SIZE_MASK 0x00000060 /* Boot rom size Mask */ |
| #define SDR0_SDSTP1_BOOT_SIZE_16MB 0x00000060 /* 16 MB */ |
| #define SDR0_SDSTP1_BOOT_SIZE_8MB 0x00000040 /* 8 MB */ |
| #define SDR0_SDSTP1_BOOT_SIZE_4MB 0x00000020 /* 4 MB */ |
| #define SDR0_SDSTP1_BOOT_SIZE_2MB 0x00000000 /* 2 MB */ |
| |
| /* Serial Device Enabled - Addr = 0xA8 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_IIC_A8_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 |
| /* Serial Device Enabled - Addr = 0xA4 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_IIC_A4_EN SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 |
| |
| /* Pin Straps Reg */ |
| #define SDR0_PSTRP0 0x0040 |
| #define SDR0_PSTRP0_BOOTSTRAP_MASK 0xE0000000 /* Strap Bits */ |
| |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS0 0x00000000 /* Default strap settings 0 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS1 0x20000000 /* Default strap settings 1 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS2 0x40000000 /* Default strap settings 2 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS3 0x60000000 /* Default strap settings 3 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS4 0x80000000 /* Default strap settings 4 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS5 0xA0000000 /* Default strap settings 5 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS6 0xC0000000 /* Default strap settings 6 */ |
| #define SDR0_PSTRP0_BOOTSTRAP_SETTINGS7 0xE0000000 /* Default strap settings 7 */ |
| |
| /* fpgareg - defines are in include/config/YUCCA.h */ |
| |
| #define SDR0_CUST0_ENET3_MASK 0x00000080 |
| #define SDR0_CUST0_ENET3_COPPER 0x00000000 |
| #define SDR0_CUST0_ENET3_FIBER 0x00000080 |
| #define SDR0_CUST0_RGMII3_MASK 0x00000070 |
| #define SDR0_CUST0_RGMII3_ENCODE(n) ((((unsigned long)(n))&0x7)<<4) |
| #define SDR0_CUST0_RGMII3_DECODE(n) ((((unsigned long)(n))>>4)&0x07) |
| #define SDR0_CUST0_RGMII3_DISAB 0x00000000 |
| #define SDR0_CUST0_RGMII3_RTBI 0x00000040 |
| #define SDR0_CUST0_RGMII3_RGMII 0x00000050 |
| #define SDR0_CUST0_RGMII3_TBI 0x00000060 |
| #define SDR0_CUST0_RGMII3_GMII 0x00000070 |
| #define SDR0_CUST0_ENET2_MASK 0x00000008 |
| #define SDR0_CUST0_ENET2_COPPER 0x00000000 |
| #define SDR0_CUST0_ENET2_FIBER 0x00000008 |
| #define SDR0_CUST0_RGMII2_MASK 0x00000007 |
| #define SDR0_CUST0_RGMII2_ENCODE(n) ((((unsigned long)(n))&0x7)<<0) |
| #define SDR0_CUST0_RGMII2_DECODE(n) ((((unsigned long)(n))>>0)&0x07) |
| #define SDR0_CUST0_RGMII2_DISAB 0x00000000 |
| #define SDR0_CUST0_RGMII2_RTBI 0x00000004 |
| #define SDR0_CUST0_RGMII2_RGMII 0x00000005 |
| #define SDR0_CUST0_RGMII2_TBI 0x00000006 |
| #define SDR0_CUST0_RGMII2_GMII 0x00000007 |
| |
| #define ONE_MILLION 1000000 |
| #define ONE_BILLION 1000000000 |
| |
| /*----------------------------------------------------------------------------+ |
| | X |
| | XX |
| | XX XXX XXXXX XX XXX XXXXX |
| | XX XX X XXX XX XX |
| | XX XX XXXXXX XX XX |
| | XX XX X XX XX XX XX |
| | XXX XX XXXXX X XXXX XXX |
| +----------------------------------------------------------------------------*/ |
| /*----------------------------------------------------------------------------+ |
| | Declare Configuration values |
| +----------------------------------------------------------------------------*/ |
| |
| typedef enum config_selection { |
| CONFIG_NOT_SELECTED, |
| CONFIG_SELECTED |
| } config_selection_t; |
| |
| typedef enum config_list { |
| UART2_IN_SERVICE_MODE, |
| CPU_TRACE_MODE, |
| UART1_CTS_RTS, |
| CONFIG_NB |
| } config_list_t; |
| |
| #define MAX_CONFIG_SELECT_NB 3 |
| |
| #define BOARD_INFO_UART2_IN_SERVICE_MODE 1 |
| #define BOARD_INFO_CPU_TRACE_MODE 2 |
| #define BOARD_INFO_UART1_CTS_RTS_MODE 4 |
| |
| void force_bup_config_selection(config_selection_t *confgi_select_P); |
| void update_config_selection_table(config_selection_t *config_select_P); |
| void display_config_selection(config_selection_t *config_select_P); |
| |
| /*----------------------------------------------------------------------------+ |
| | XX |
| | |
| | XXXX XX XXX XXX XXXX |
| | XX XX XX XX XX XX |
| | XX XXX XX XX XX XX XX |
| | XX XX XXXXX XX XX XX |
| | XXXX XX XXXX XXXX |
| | XXXX |
| | |
| | |
| | |
| | +------------------------------------------------------------------+ |
| | | GPIO/Secondary func | Primary Function | I/O | Alternate1 | I/O | |
| | +----------------------+------------------+-----+------------+-----+ |
| | | | | | | | |
| | | GPIO0_0 | PCIX0REQ2_N | I/O | TRCCLK | | |
| | | GPIO0_1 | PCIX0REQ3_N | I/O | TRCBS0 | | |
| | | GPIO0_2 | PCIX0GNT2_N | I/O | TRCBS1 | | |
| | | GPIO0_3 | PCIX0GNT3_N | I/O | TRCBS2 | | |
| | | GPIO0_4 | PCIX1REQ2_N | I/O | TRCES0 | | |
| | | GPIO0_5 | PCIX1REQ3_N | I/O | TRCES1 | | |
| | | GPIO0_6 | PCIX1GNT2_N | I/O | TRCES2 | NA | |
| | | GPIO0_7 | PCIX1GNT3_N | I/O | TRCES3 | NA | |
| | | GPIO0_8 | PERREADY | I | TRCES4 | NA | |
| | | GPIO0_9 | PERCS1_N | O | TRCTS0 | NA | |
| | | GPIO0_10 | PERCS2_N | O | TRCTS1 | NA | |
| | | GPIO0_11 | IRQ0 | I | TRCTS2 | NA | |
| | | GPIO0_12 | IRQ1 | I | TRCTS3 | NA | |
| | | GPIO0_13 | IRQ2 | I | TRCTS4 | NA | |
| | | GPIO0_14 | IRQ3 | I | TRCTS5 | NA | |
| | | GPIO0_15 | IRQ4 | I | TRCTS6 | NA | |
| | | GPIO0_16 | IRQ5 | I | UART2RX | I | |
| | | GPIO0_17 | PERBE0_N | O | UART2TX | O | |
| | | GPIO0_18 | PCI0GNT0_N | I/O | NA | NA | |
| | | GPIO0_19 | PCI0GNT1_N | I/O | NA | NA | |
| | | GPIO0_20 | PCI0REQ0_N | I/O | NA | NA | |
| | | GPIO0_21 | PCI0REQ1_N | I/O | NA | NA | |
| | | GPIO0_22 | PCI1GNT0_N | I/O | NA | NA | |
| | | GPIO0_23 | PCI1GNT1_N | I/O | NA | NA | |
| | | GPIO0_24 | PCI1REQ0_N | I/O | NA | NA | |
| | | GPIO0_25 | PCI1REQ1_N | I/O | NA | NA | |
| | | GPIO0_26 | PCI2GNT0_N | I/O | NA | NA | |
| | | GPIO0_27 | PCI2GNT1_N | I/O | NA | NA | |
| | | GPIO0_28 | PCI2REQ0_N | I/O | NA | NA | |
| | | GPIO0_29 | PCI2REQ1_N | I/O | NA | NA | |
| | | GPIO0_30 | UART1RX | I | NA | NA | |
| | | GPIO0_31 | UART1TX | O | NA | NA | |
| | | | | | | | |
| | +----------------------+------------------+-----+------------+-----+ |
| | |
| +----------------------------------------------------------------------------*/ |
| |
| unsigned long auto_calc_speed(void); |
| /*----------------------------------------------------------------------------+ |
| | Prototypes |
| +----------------------------------------------------------------------------*/ |
| void print_evb440spe_info(void); |
| |
| int onboard_pci_arbiter_selected(int core_pci); |
| |
| #ifdef __cplusplus |
| } |
| #endif |
| #endif /* __YUCCA_H_ */ |