| /* |
| * Copyright (C) 2015 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <asm/arch/clock.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/mx7-pins.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/gpio.h> |
| #include <asm/imx-common/iomux-v3.h> |
| #include <asm/io.h> |
| #include <linux/sizes.h> |
| #include <common.h> |
| #include <fsl_esdhc.h> |
| #include <mmc.h> |
| #include <miiphy.h> |
| #include <netdev.h> |
| #include <power/pmic.h> |
| #include <power/pfuze3000_pmic.h> |
| #include "../common/pfuze.h" |
| #include <i2c.h> |
| #include <asm/imx-common/mxc_i2c.h> |
| #include <asm/arch/crm_regs.h> |
| #include <usb.h> |
| #include <usb/ehci-ci.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #define UART_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | \ |
| PAD_CTL_PUS_PU100KOHM | PAD_CTL_HYS) |
| |
| #define USDHC_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ |
| PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) |
| |
| #define ENET_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) |
| #define ENET_PAD_CTRL_MII (PAD_CTL_DSE_3P3V_32OHM) |
| |
| #define ENET_RX_PAD_CTRL (PAD_CTL_PUS_PU100KOHM | PAD_CTL_DSE_3P3V_49OHM) |
| |
| #define I2C_PAD_CTRL (PAD_CTL_DSE_3P3V_32OHM | PAD_CTL_SRE_SLOW | \ |
| PAD_CTL_HYS | PAD_CTL_PUE | PAD_CTL_PUS_PU100KOHM) |
| |
| #define LCD_PAD_CTRL (PAD_CTL_HYS | PAD_CTL_PUS_PU100KOHM | \ |
| PAD_CTL_DSE_3P3V_49OHM) |
| |
| #define QSPI_PAD_CTRL \ |
| (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUE | PAD_CTL_PUS_PU47KOHM) |
| |
| #define NAND_PAD_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_SRE_SLOW | PAD_CTL_HYS) |
| |
| #define NAND_PAD_READY0_CTRL (PAD_CTL_DSE_3P3V_49OHM | PAD_CTL_PUS_PU5KOHM) |
| #ifdef CONFIG_SYS_I2C_MXC |
| #define PC MUX_PAD_CTRL(I2C_PAD_CTRL) |
| /* I2C1 for PMIC */ |
| static struct i2c_pads_info i2c_pad_info1 = { |
| .scl = { |
| .i2c_mode = MX7D_PAD_I2C1_SCL__I2C1_SCL | PC, |
| .gpio_mode = MX7D_PAD_I2C1_SCL__GPIO4_IO8 | PC, |
| .gp = IMX_GPIO_NR(4, 8), |
| }, |
| .sda = { |
| .i2c_mode = MX7D_PAD_I2C1_SDA__I2C1_SDA | PC, |
| .gpio_mode = MX7D_PAD_I2C1_SDA__GPIO4_IO9 | PC, |
| .gp = IMX_GPIO_NR(4, 9), |
| }, |
| }; |
| #endif |
| |
| int dram_init(void) |
| { |
| gd->ram_size = PHYS_SDRAM_SIZE; |
| |
| return 0; |
| } |
| |
| static iomux_v3_cfg_t const wdog_pads[] = { |
| MX7D_PAD_GPIO1_IO00__WDOG1_WDOG_B | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| static iomux_v3_cfg_t const uart1_pads[] = { |
| MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX | MUX_PAD_CTRL(UART_PAD_CTRL), |
| MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX | MUX_PAD_CTRL(UART_PAD_CTRL), |
| }; |
| |
| static iomux_v3_cfg_t const usdhc1_pads[] = { |
| MX7D_PAD_SD1_CLK__SD1_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD1_CMD__SD1_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD1_DATA0__SD1_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD1_DATA1__SD1_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD1_DATA2__SD1_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD1_DATA3__SD1_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| |
| MX7D_PAD_SD1_CD_B__GPIO5_IO0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD1_RESET_B__GPIO5_IO2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| }; |
| |
| static iomux_v3_cfg_t const usdhc3_emmc_pads[] = { |
| MX7D_PAD_SD3_CLK__SD3_CLK | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_CMD__SD3_CMD | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA0__SD3_DATA0 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA1__SD3_DATA1 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA2__SD3_DATA2 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA3__SD3_DATA3 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA4__SD3_DATA4 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA5__SD3_DATA5 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA6__SD3_DATA6 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_DATA7__SD3_DATA7 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| MX7D_PAD_SD3_STROBE__SD3_STROBE | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| |
| MX7D_PAD_SD3_RESET_B__GPIO6_IO11 | MUX_PAD_CTRL(USDHC_PAD_CTRL), |
| }; |
| |
| static iomux_v3_cfg_t const usb_otg1_pads[] = { |
| MX7D_PAD_GPIO1_IO05__USB_OTG1_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| static iomux_v3_cfg_t const usb_otg2_pads[] = { |
| MX7D_PAD_UART3_CTS_B__USB_OTG2_PWR | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| #define IOX_SDI IMX_GPIO_NR(1, 9) |
| #define IOX_STCP IMX_GPIO_NR(1, 12) |
| #define IOX_SHCP IMX_GPIO_NR(1, 13) |
| |
| static iomux_v3_cfg_t const iox_pads[] = { |
| /* IOX_SDI */ |
| MX7D_PAD_GPIO1_IO09__GPIO1_IO9 | MUX_PAD_CTRL(NO_PAD_CTRL), |
| /* IOX_STCP */ |
| MX7D_PAD_GPIO1_IO12__GPIO1_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL), |
| /* IOX_SHCP */ |
| MX7D_PAD_GPIO1_IO13__GPIO1_IO13 | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| /* |
| * PCIE_DIS_B --> Q0 |
| * PCIE_RST_B --> Q1 |
| * HDMI_RST_B --> Q2 |
| * PERI_RST_B --> Q3 |
| * SENSOR_RST_B --> Q4 |
| * ENET_RST_B --> Q5 |
| * PERI_3V3_EN --> Q6 |
| * LCD_PWR_EN --> Q7 |
| */ |
| enum qn { |
| PCIE_DIS_B, |
| PCIE_RST_B, |
| HDMI_RST_B, |
| PERI_RST_B, |
| SENSOR_RST_B, |
| ENET_RST_B, |
| PERI_3V3_EN, |
| LCD_PWR_EN, |
| }; |
| |
| enum qn_func { |
| qn_reset, |
| qn_enable, |
| qn_disable, |
| }; |
| |
| enum qn_level { |
| qn_low = 0, |
| qn_high = 1, |
| }; |
| |
| static enum qn_level seq[3][2] = { |
| {0, 1}, {1, 1}, {0, 0} |
| }; |
| |
| static enum qn_func qn_output[8] = { |
| qn_disable, qn_reset, qn_reset, qn_reset, qn_reset, qn_reset, qn_enable, |
| qn_disable |
| }; |
| |
| static void iox74lv_init(void) |
| { |
| int i; |
| |
| for (i = 7; i >= 0; i--) { |
| gpio_direction_output(IOX_SHCP, 0); |
| gpio_direction_output(IOX_SDI, seq[qn_output[i]][0]); |
| udelay(500); |
| gpio_direction_output(IOX_SHCP, 1); |
| udelay(500); |
| } |
| |
| gpio_direction_output(IOX_STCP, 0); |
| udelay(500); |
| /* |
| * shift register will be output to pins |
| */ |
| gpio_direction_output(IOX_STCP, 1); |
| |
| for (i = 7; i >= 0; i--) { |
| gpio_direction_output(IOX_SHCP, 0); |
| gpio_direction_output(IOX_SDI, seq[qn_output[i]][1]); |
| udelay(500); |
| gpio_direction_output(IOX_SHCP, 1); |
| udelay(500); |
| } |
| gpio_direction_output(IOX_STCP, 0); |
| udelay(500); |
| /* |
| * shift register will be output to pins |
| */ |
| gpio_direction_output(IOX_STCP, 1); |
| }; |
| |
| #ifdef CONFIG_NAND_MXS |
| static iomux_v3_cfg_t const gpmi_pads[] = { |
| MX7D_PAD_SD3_DATA0__NAND_DATA00 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_DATA1__NAND_DATA01 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_DATA2__NAND_DATA02 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_DATA3__NAND_DATA03 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_DATA4__NAND_DATA04 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_DATA5__NAND_DATA05 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_DATA6__NAND_DATA06 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_DATA7__NAND_DATA07 | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_CLK__NAND_CLE | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_CMD__NAND_ALE | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_STROBE__NAND_RE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SD3_RESET_B__NAND_WE_B | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SAI1_MCLK__NAND_WP_B | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SAI1_RX_BCLK__NAND_CE3_B | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SAI1_RX_SYNC__NAND_CE2_B | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SAI1_RX_DATA__NAND_CE1_B | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SAI1_TX_BCLK__NAND_CE0_B | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SAI1_TX_SYNC__NAND_DQS | MUX_PAD_CTRL(NAND_PAD_CTRL), |
| MX7D_PAD_SAI1_TX_DATA__NAND_READY_B | MUX_PAD_CTRL(NAND_PAD_READY0_CTRL), |
| }; |
| |
| static void setup_gpmi_nand(void) |
| { |
| imx_iomux_v3_setup_multiple_pads(gpmi_pads, ARRAY_SIZE(gpmi_pads)); |
| |
| /* NAND_USDHC_BUS_CLK is set in rom */ |
| set_clk_nand(); |
| } |
| #endif |
| |
| #ifdef CONFIG_VIDEO_MXS |
| static iomux_v3_cfg_t const lcd_pads[] = { |
| MX7D_PAD_LCD_CLK__LCD_CLK | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_ENABLE__LCD_ENABLE | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_HSYNC__LCD_HSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_VSYNC__LCD_VSYNC | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA00__LCD_DATA0 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA01__LCD_DATA1 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA02__LCD_DATA2 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA03__LCD_DATA3 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA04__LCD_DATA4 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA05__LCD_DATA5 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA06__LCD_DATA6 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA07__LCD_DATA7 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA08__LCD_DATA8 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA09__LCD_DATA9 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA10__LCD_DATA10 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA11__LCD_DATA11 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA12__LCD_DATA12 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA13__LCD_DATA13 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA14__LCD_DATA14 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA15__LCD_DATA15 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA16__LCD_DATA16 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA17__LCD_DATA17 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA18__LCD_DATA18 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA19__LCD_DATA19 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA20__LCD_DATA20 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA21__LCD_DATA21 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA22__LCD_DATA22 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| MX7D_PAD_LCD_DATA23__LCD_DATA23 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| |
| MX7D_PAD_LCD_RESET__GPIO3_IO4 | MUX_PAD_CTRL(LCD_PAD_CTRL), |
| }; |
| |
| static iomux_v3_cfg_t const pwm_pads[] = { |
| /* Use GPIO for Brightness adjustment, duty cycle = period */ |
| MX7D_PAD_GPIO1_IO01__GPIO1_IO1 | MUX_PAD_CTRL(NO_PAD_CTRL), |
| }; |
| |
| static int setup_lcd(void) |
| { |
| imx_iomux_v3_setup_multiple_pads(lcd_pads, ARRAY_SIZE(lcd_pads)); |
| |
| imx_iomux_v3_setup_multiple_pads(pwm_pads, ARRAY_SIZE(pwm_pads)); |
| |
| /* Reset LCD */ |
| gpio_direction_output(IMX_GPIO_NR(3, 4) , 0); |
| udelay(500); |
| gpio_direction_output(IMX_GPIO_NR(3, 4) , 1); |
| |
| /* Set Brightness to high */ |
| gpio_direction_output(IMX_GPIO_NR(1, 1) , 1); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_FEC_MXC |
| static iomux_v3_cfg_t const fec1_pads[] = { |
| MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC | MUX_PAD_CTRL(ENET_RX_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL | MUX_PAD_CTRL(ENET_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 | MUX_PAD_CTRL(ENET_PAD_CTRL), |
| MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC | MUX_PAD_CTRL(ENET_PAD_CTRL), |
| MX7D_PAD_GPIO1_IO10__ENET1_MDIO | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), |
| MX7D_PAD_GPIO1_IO11__ENET1_MDC | MUX_PAD_CTRL(ENET_PAD_CTRL_MII), |
| }; |
| |
| static void setup_iomux_fec(void) |
| { |
| imx_iomux_v3_setup_multiple_pads(fec1_pads, ARRAY_SIZE(fec1_pads)); |
| } |
| #endif |
| |
| static void setup_iomux_uart(void) |
| { |
| imx_iomux_v3_setup_multiple_pads(uart1_pads, ARRAY_SIZE(uart1_pads)); |
| } |
| |
| #ifdef CONFIG_FSL_ESDHC |
| |
| #define USDHC1_CD_GPIO IMX_GPIO_NR(5, 0) |
| #define USDHC1_PWR_GPIO IMX_GPIO_NR(5, 2) |
| #define USDHC3_PWR_GPIO IMX_GPIO_NR(6, 11) |
| |
| static struct fsl_esdhc_cfg usdhc_cfg[3] = { |
| {USDHC1_BASE_ADDR, 0, 4}, |
| {USDHC3_BASE_ADDR}, |
| }; |
| |
| int board_mmc_get_env_dev(int devno) |
| { |
| if (devno == 2) |
| devno--; |
| |
| return devno; |
| } |
| |
| static int mmc_map_to_kernel_blk(int dev_no) |
| { |
| if (dev_no == 1) |
| dev_no++; |
| |
| return dev_no; |
| } |
| |
| int board_mmc_getcd(struct mmc *mmc) |
| { |
| struct fsl_esdhc_cfg *cfg = (struct fsl_esdhc_cfg *)mmc->priv; |
| int ret = 0; |
| |
| switch (cfg->esdhc_base) { |
| case USDHC1_BASE_ADDR: |
| ret = !gpio_get_value(USDHC1_CD_GPIO); |
| break; |
| case USDHC3_BASE_ADDR: |
| ret = 1; /* Assume uSDHC3 emmc is always present */ |
| break; |
| } |
| |
| return ret; |
| } |
| |
| int board_mmc_init(bd_t *bis) |
| { |
| int i, ret; |
| /* |
| * According to the board_mmc_init() the following map is done: |
| * (U-Boot device node) (Physical Port) |
| * mmc0 USDHC1 |
| * mmc2 USDHC3 (eMMC) |
| */ |
| for (i = 0; i < CONFIG_SYS_FSL_USDHC_NUM; i++) { |
| switch (i) { |
| case 0: |
| imx_iomux_v3_setup_multiple_pads( |
| usdhc1_pads, ARRAY_SIZE(usdhc1_pads)); |
| gpio_request(USDHC1_CD_GPIO, "usdhc1_cd"); |
| gpio_direction_input(USDHC1_CD_GPIO); |
| gpio_request(USDHC1_PWR_GPIO, "usdhc1_pwr"); |
| gpio_direction_output(USDHC1_PWR_GPIO, 0); |
| udelay(500); |
| gpio_direction_output(USDHC1_PWR_GPIO, 1); |
| usdhc_cfg[0].sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK); |
| break; |
| case 1: |
| imx_iomux_v3_setup_multiple_pads( |
| usdhc3_emmc_pads, ARRAY_SIZE(usdhc3_emmc_pads)); |
| gpio_request(USDHC3_PWR_GPIO, "usdhc3_pwr"); |
| gpio_direction_output(USDHC3_PWR_GPIO, 0); |
| udelay(500); |
| gpio_direction_output(USDHC3_PWR_GPIO, 1); |
| usdhc_cfg[1].sdhc_clk = mxc_get_clock(MXC_ESDHC3_CLK); |
| break; |
| default: |
| printf("Warning: you configured more USDHC controllers" |
| "(%d) than supported by the board\n", i + 1); |
| return -EINVAL; |
| } |
| |
| ret = fsl_esdhc_initialize(bis, &usdhc_cfg[i]); |
| if (ret) |
| return ret; |
| } |
| |
| return 0; |
| } |
| |
| static int check_mmc_autodetect(void) |
| { |
| char *autodetect_str = getenv("mmcautodetect"); |
| |
| if ((autodetect_str != NULL) && |
| (strcmp(autodetect_str, "yes") == 0)) { |
| return 1; |
| } |
| |
| return 0; |
| } |
| |
| static void mmc_late_init(void) |
| { |
| char cmd[32]; |
| char mmcblk[32]; |
| u32 dev_no = mmc_get_env_dev(); |
| |
| if (!check_mmc_autodetect()) |
| return; |
| |
| setenv_ulong("mmcdev", dev_no); |
| |
| /* Set mmcblk env */ |
| sprintf(mmcblk, "/dev/mmcblk%dp2 rootwait rw", |
| mmc_map_to_kernel_blk(dev_no)); |
| setenv("mmcroot", mmcblk); |
| |
| sprintf(cmd, "mmc dev %d", dev_no); |
| run_command(cmd, 0); |
| } |
| |
| #endif |
| |
| #ifdef CONFIG_FEC_MXC |
| int board_eth_init(bd_t *bis) |
| { |
| int ret; |
| |
| setup_iomux_fec(); |
| |
| ret = fecmxc_initialize_multi(bis, 0, |
| CONFIG_FEC_MXC_PHYADDR, IMX_FEC_BASE); |
| if (ret) |
| printf("FEC1 MXC: %s:failed\n", __func__); |
| |
| return ret; |
| } |
| |
| static int setup_fec(void) |
| { |
| struct iomuxc_gpr_base_regs *const iomuxc_gpr_regs |
| = (struct iomuxc_gpr_base_regs *) IOMUXC_GPR_BASE_ADDR; |
| |
| /* Use 125M anatop REF_CLK1 for ENET1, clear gpr1[13], gpr1[17]*/ |
| clrsetbits_le32(&iomuxc_gpr_regs->gpr[1], |
| (IOMUXC_GPR_GPR1_GPR_ENET1_TX_CLK_SEL_MASK | |
| IOMUXC_GPR_GPR1_GPR_ENET1_CLK_DIR_MASK), 0); |
| |
| return set_clk_enet(ENET_125MHz); |
| } |
| |
| |
| int board_phy_config(struct phy_device *phydev) |
| { |
| /* enable rgmii rxc skew and phy mode select to RGMII copper */ |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x21); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x7ea8); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1e, 0x2f); |
| phy_write(phydev, MDIO_DEVAD_NONE, 0x1f, 0x71b7); |
| |
| if (phydev->drv->config) |
| phydev->drv->config(phydev); |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_FSL_QSPI |
| static iomux_v3_cfg_t const quadspi_pads[] = { |
| MX7D_PAD_EPDC_DATA00__QSPI_A_DATA0 | MUX_PAD_CTRL(QSPI_PAD_CTRL), |
| MX7D_PAD_EPDC_DATA01__QSPI_A_DATA1 | MUX_PAD_CTRL(QSPI_PAD_CTRL), |
| MX7D_PAD_EPDC_DATA02__QSPI_A_DATA2 | MUX_PAD_CTRL(QSPI_PAD_CTRL), |
| MX7D_PAD_EPDC_DATA03__QSPI_A_DATA3 | MUX_PAD_CTRL(QSPI_PAD_CTRL), |
| MX7D_PAD_EPDC_DATA05__QSPI_A_SCLK | MUX_PAD_CTRL(QSPI_PAD_CTRL), |
| MX7D_PAD_EPDC_DATA06__QSPI_A_SS0_B | MUX_PAD_CTRL(QSPI_PAD_CTRL), |
| }; |
| |
| int board_qspi_init(void) |
| { |
| /* Set the iomux */ |
| imx_iomux_v3_setup_multiple_pads(quadspi_pads, |
| ARRAY_SIZE(quadspi_pads)); |
| |
| /* Set the clock */ |
| set_clk_qspi(); |
| |
| return 0; |
| } |
| #endif |
| |
| int board_early_init_f(void) |
| { |
| setup_iomux_uart(); |
| |
| setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); |
| imx_iomux_v3_setup_multiple_pads(usb_otg1_pads, |
| ARRAY_SIZE(usb_otg1_pads)); |
| imx_iomux_v3_setup_multiple_pads(usb_otg2_pads, |
| ARRAY_SIZE(usb_otg2_pads)); |
| |
| return 0; |
| } |
| |
| int board_init(void) |
| { |
| /* address of boot parameters */ |
| gd->bd->bi_boot_params = PHYS_SDRAM + 0x100; |
| |
| imx_iomux_v3_setup_multiple_pads(iox_pads, ARRAY_SIZE(iox_pads)); |
| |
| iox74lv_init(); |
| |
| #ifdef CONFIG_FEC_MXC |
| setup_fec(); |
| #endif |
| |
| #ifdef CONFIG_NAND_MXS |
| setup_gpmi_nand(); |
| #endif |
| |
| #ifdef CONFIG_VIDEO_MXS |
| setup_lcd(); |
| #endif |
| |
| #ifdef CONFIG_FSL_QSPI |
| board_qspi_init(); |
| #endif |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_POWER |
| #define I2C_PMIC 0 |
| int power_init_board(void) |
| { |
| struct pmic *p; |
| int ret; |
| unsigned int reg, rev_id; |
| |
| ret = power_pfuze3000_init(I2C_PMIC); |
| if (ret) |
| return ret; |
| |
| p = pmic_get("PFUZE3000"); |
| ret = pmic_probe(p); |
| if (ret) |
| return ret; |
| |
| pmic_reg_read(p, PFUZE3000_DEVICEID, ®); |
| pmic_reg_read(p, PFUZE3000_REVID, &rev_id); |
| printf("PMIC: PFUZE3000 DEV_ID=0x%x REV_ID=0x%x\n", reg, rev_id); |
| |
| /* disable Low Power Mode during standby mode */ |
| pmic_reg_read(p, PFUZE3000_LDOGCTL, ®); |
| reg |= 0x1; |
| pmic_reg_write(p, PFUZE3000_LDOGCTL, reg); |
| |
| return 0; |
| } |
| #endif |
| |
| int board_late_init(void) |
| { |
| struct wdog_regs *wdog = (struct wdog_regs *)WDOG1_BASE_ADDR; |
| |
| #ifdef CONFIG_ENV_IS_IN_MMC |
| mmc_late_init(); |
| #endif |
| |
| imx_iomux_v3_setup_multiple_pads(wdog_pads, ARRAY_SIZE(wdog_pads)); |
| |
| set_wdog_reset(wdog); |
| |
| /* |
| * Do not assert internal WDOG_RESET_B_DEB(controlled by bit 4), |
| * since we use PMIC_PWRON to reset the board. |
| */ |
| clrsetbits_le16(&wdog->wcr, 0, 0x10); |
| |
| return 0; |
| } |
| |
| int checkboard(void) |
| { |
| puts("Board: i.MX7D SABRESD\n"); |
| |
| return 0; |
| } |
| |
| #ifdef CONFIG_USB_EHCI_MX7 |
| int board_usb_phy_mode(int port) |
| { |
| if (port == 0) |
| return USB_INIT_DEVICE; |
| else |
| return USB_INIT_HOST; |
| } |
| #endif |