include/configs/controlcenterd.h - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2013
  * Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
  *
  * based on P1022DS.h
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #ifndef __CONFIG_H
 #define __CONFIG_H

 #ifdef CONFIG_SDCARD
 #define CONFIG_RAMBOOT_SDCARD
 #endif

 #ifdef CONFIG_SPIFLASH
 #define CONFIG_RAMBOOT_SPIFLASH
 #endif

 /* High Level Configuration Options */
 #define CONFIG_CONTROLCENTERD
 #define CONFIG_MP			/* support multiple processors */

 #define CONFIG_SYS_NO_FLASH
 #define CONFIG_ENABLE_36BIT_PHYS

 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_ADDR_MAP
 #define CONFIG_SYS_NUM_ADDR_MAP		16	/* number of TLB1 entries */
 #endif

 #define CONFIG_L2_CACHE
 #define CONFIG_BTB

 #define CONFIG_SYS_CLK_FREQ	66666600
 #define CONFIG_DDR_CLK_FREQ	66666600

 #define CONFIG_SYS_RAMBOOT

 #ifdef CONFIG_TRAILBLAZER

 #define CONFIG_SYS_TEXT_BASE		0xf8fc0000
 #define CONFIG_RESET_VECTOR_ADDRESS	0xf8fffffc
 #define CONFIG_SYS_MONITOR_LEN		(256 * 1024)

 /*
  * Config the L2 Cache
  */
 #define CONFIG_SYS_INIT_L2_ADDR		0xf8fc0000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	0xff8fc0000ull
 #else
 #define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
 #endif
 #define CONFIG_SYS_L2_SIZE		(256 << 10)
 #define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)

 #else /* CONFIG_TRAILBLAZER */

 #define CONFIG_SYS_TEXT_BASE		0x11000000
 #define CONFIG_RESET_VECTOR_ADDRESS	0x1107fffc
 #define CONFIG_SYS_MONITOR_LEN		(512 * 1024)

 #endif /* CONFIG_TRAILBLAZER */

 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_TEXT_BASE
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)

 /*
  * Memory map
  *
  * 0x0000_0000	0x3fff_ffff	DDR			1G Cacheable
  * 0xc000_0000	0xdfff_ffff	PCI Express Mem		512M non-cacheable
  * 0xffc0_0000	0xffc2_ffff	PCI IO range		192K non-cacheable
  *
  * Localbus non-cacheable
  * 0xe000_0000	0xe00f_ffff	eLBC			1M non-cacheable
  * 0xf8fc0000	0xf8ff_ffff	L2 SRAM			256k Cacheable
  * 0xffd0_0000	0xffd0_3fff	L1 for stack		16K Cacheable TLB0
  * 0xffe0_0000	0xffef_ffff	CCSR			1M non-cacheable
  */

 #define CONFIG_SYS_INIT_RAM_LOCK
 #define CONFIG_SYS_INIT_RAM_ADDR	0xffd00000 /* Initial L1 address */
 #define CONFIG_SYS_INIT_RAM_SIZE	0x00004000 /* used area in RAM */
 #define CONFIG_SYS_GBL_DATA_OFFSET	\
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET	CONFIG_SYS_GBL_DATA_OFFSET

 #ifdef CONFIG_TRAILBLAZER
 /* leave CCSRBAR at default, because u-boot expects it to be exactly there */
 #define CONFIG_SYS_CCSRBAR		CONFIG_SYS_CCSRBAR_DEFAULT
 #else
 #define CONFIG_SYS_CCSRBAR		0xffe00000
 #endif
 #define CONFIG_SYS_CCSRBAR_PHYS_LOW	CONFIG_SYS_CCSRBAR
 #define CONFIG_SYS_MPC85xx_GPIO3_ADDR	(CONFIG_SYS_CCSRBAR+0xf200)

 /*
  * DDR Setup
  */

 #define CONFIG_SYS_DDR_SDRAM_BASE	0x00000000
 #define CONFIG_SYS_SDRAM_BASE		CONFIG_SYS_DDR_SDRAM_BASE
 #define CONFIG_SYS_SDRAM_SIZE 1024
 #define CONFIG_VERY_BIG_RAM

 #define CONFIG_DIMM_SLOTS_PER_CTLR	1
 #define CONFIG_CHIP_SELECTS_PER_CTRL	(2 * CONFIG_DIMM_SLOTS_PER_CTLR)

 #define CONFIG_SYS_MEMTEST_START	0x00000000
 #define CONFIG_SYS_MEMTEST_END		0x3fffffff

 #ifdef CONFIG_TRAILBLAZER
 #define CONFIG_SPD_EEPROM
 #define SPD_EEPROM_ADDRESS 0x52
 /*#define CONFIG_FSL_DDR_INTERACTIVE*/
 #endif

 /*
  * Local Bus Definitions
  */
 #define CONFIG_FSL_ELBC			/* Has Enhanced localbus controller */

 #define CONFIG_SYS_ELBC_BASE		0xe0000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_ELBC_BASE_PHYS	0xfe0000000ull
 #else
 #define CONFIG_SYS_ELBC_BASE_PHYS	CONFIG_SYS_ELBC_BASE
 #endif

 #define CONFIG_UART_BR_PRELIM  \
 	(BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) | BR_PS_8 | BR_V)
 #define CONFIG_UART_OR_PRELIM	(OR_AM_32KB | 0xff7)

 #define CONFIG_SYS_BR0_PRELIM	0 /* CS0 was originally intended for FPGA */
 #define CONFIG_SYS_OR0_PRELIM	0 /* debugging, was never used */

 #define CONFIG_SYS_BR1_PRELIM	CONFIG_UART_BR_PRELIM
 #define CONFIG_SYS_OR1_PRELIM	CONFIG_UART_OR_PRELIM

 /*
  * Serial Port
  */
 #define CONFIG_CONS_INDEX		2
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE	1
 #define CONFIG_SYS_NS16550_CLK		get_bus_freq(0)

 #define CONFIG_SYS_BAUDRATE_TABLE	\
 	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

 #define CONFIG_SYS_NS16550_COM1	(CONFIG_SYS_CCSRBAR+0x4500)
 #define CONFIG_SYS_NS16550_COM2	(CONFIG_SYS_CCSRBAR+0x4600)

 /*
  * I2C
  */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
 #define CONFIG_SYS_FSL_I2C_SPEED	400000
 #define CONFIG_SYS_FSL_I2C_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C_OFFSET	0x3000
 #define CONFIG_SYS_FSL_I2C2_SPEED	400000
 #define CONFIG_SYS_FSL_I2C2_SLAVE	0x7F
 #define CONFIG_SYS_FSL_I2C2_OFFSET	0x3100

 #ifndef CONFIG_TRAILBLAZER
 #endif

 #define CONFIG_PCA9698			/* NXP PCA9698 */

 #define CONFIG_CMD_EEPROM
 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2

 #ifndef CONFIG_TRAILBLAZER
 /*
  * eSPI - Enhanced SPI
  */
 #define CONFIG_HARD_SPI

 #define CONFIG_SF_DEFAULT_SPEED		10000000
 #define CONFIG_SF_DEFAULT_MODE		0
 #endif

 #define CONFIG_SHA1

 /*
  * MMC
  */
 #define CONFIG_GENERIC_MMC

 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	CONFIG_SYS_MPC85xx_ESDHC_ADDR

 #ifndef CONFIG_TRAILBLAZER

 /*
  * Video
  */
 #define CONFIG_FSL_DIU_FB
 #define CONFIG_SYS_DIU_ADDR	(CONFIG_SYS_CCSRBAR + 0x10000)
 #define CONFIG_CMD_BMP

 /*
  * General PCI
  * Memory space is mapped 1-1, but I/O space must start from 0.
  */
 #define CONFIG_PCIE1			/* PCIE controller 1 (slot 1) */
 #define CONFIG_PCI_INDIRECT_BRIDGE
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
 #define CONFIG_SYS_PCI_64BIT		/* enable 64-bit PCI resources */
 #define CONFIG_CMD_PCI

 #define CONFIG_FSL_PCI_INIT		/* Use common FSL init code */
 #define CONFIG_FSL_PCIE_RESET		/* need PCIe reset errata */

 #define CONFIG_SYS_PCIE1_MEM_VIRT	0xc0000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_MEM_BUS	0xe0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc40000000ull
 #else
 #define CONFIG_SYS_PCIE1_MEM_BUS	0xc0000000
 #define CONFIG_SYS_PCIE1_MEM_PHYS	0xc0000000
 #endif
 #define CONFIG_SYS_PCIE1_MEM_SIZE	0x20000000	/* 512M */
 #define CONFIG_SYS_PCIE1_IO_VIRT	0xffc20000
 #define CONFIG_SYS_PCIE1_IO_BUS		0x00000000
 #ifdef CONFIG_PHYS_64BIT
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xfffc20000ull
 #else
 #define CONFIG_SYS_PCIE1_IO_PHYS	0xffc20000
 #endif
 #define CONFIG_SYS_PCIE1_IO_SIZE	0x00010000	/* 64k */

 /*
  * SATA
  */
 #define CONFIG_LIBATA
 #define CONFIG_LBA48
 #define CONFIG_CMD_SATA

 #define CONFIG_FSL_SATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	2
 #define CONFIG_SATA1
 #define CONFIG_SYS_SATA1		CONFIG_SYS_MPC85xx_SATA1_ADDR
 #define CONFIG_SYS_SATA1_FLAGS		FLAGS_DMA
 #define CONFIG_SATA2
 #define CONFIG_SYS_SATA2		CONFIG_SYS_MPC85xx_SATA2_ADDR
 #define CONFIG_SYS_SATA2_FLAGS		FLAGS_DMA

 /*
  * Ethernet
  */
 #define CONFIG_TSEC_ENET

 #define CONFIG_TSECV2

 #define CONFIG_MII			/* MII PHY management */
 #define CONFIG_TSEC1		1
 #define CONFIG_TSEC1_NAME	"eTSEC1"
 #define CONFIG_TSEC2		1
 #define CONFIG_TSEC2_NAME	"eTSEC2"

 #define TSEC1_PHY_ADDR		0
 #define TSEC2_PHY_ADDR		1

 #define TSEC1_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)
 #define TSEC2_FLAGS		(TSEC_GIGABIT | TSEC_REDUCED)

 #define TSEC1_PHYIDX		0
 #define TSEC2_PHYIDX		0

 #define CONFIG_ETHPRIME		"eTSEC1"

 #define CONFIG_PHY_GIGE		/* Include GbE speed/duplex detection */

 /*
  * USB
  */
 #define CONFIG_USB_EHCI

 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_USB_EHCI_FSL
 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET

 #endif /* CONFIG_TRAILBLAZER */

 /*
  * Environment
  */
 #if defined(CONFIG_TRAILBLAZER)
 #define CONFIG_ENV_IS_NOWHERE
 #define CONFIG_ENV_SIZE		0x2000		/* 8KB */
 #elif defined(CONFIG_RAMBOOT_SPIFLASH)
 #define CONFIG_ENV_IS_IN_SPI_FLASH
 #define CONFIG_ENV_SPI_BUS	0
 #define CONFIG_ENV_SPI_CS	0
 #define CONFIG_ENV_SPI_MAX_HZ	10000000
 #define CONFIG_ENV_SPI_MODE	0
 #define CONFIG_ENV_SIZE		0x2000		/* 8KB */
 #define CONFIG_ENV_OFFSET	0x100000	/* 1MB */
 #define CONFIG_ENV_SECT_SIZE	0x10000
 #elif defined(CONFIG_RAMBOOT_SDCARD)
 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_FSL_FIXED_MMC_LOCATION
 #define CONFIG_ENV_SIZE		0x2000
 #define CONFIG_SYS_MMC_ENV_DEV	0
 #endif

 #define CONFIG_SYS_EXTRA_ENV_RELOC

 /*
  * Command line configuration.
  */
 #ifndef CONFIG_TRAILBLAZER
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_CMDLINE_EDITING			/* Command-line editing */
 #define CONFIG_AUTO_COMPLETE			/* add autocompletion support */
 #endif /* CONFIG_TRAILBLAZER */

 #define CONFIG_SYS_LOAD_ADDR	0x2000000	/* default load address */
 #ifdef CONFIG_CMD_KGDB
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O Buffer Size */
 #else
 #define CONFIG_SYS_CBSIZE	256		/* Console I/O Buffer Size */
 #endif
 /* Print Buffer Size */
 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 #define CONFIG_SYS_MAXARGS	16
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE

 #ifndef CONFIG_TRAILBLAZER

 #define CONFIG_CMD_ERRATA
 #define CONFIG_CMD_IRQ
 #define CONFIG_CMD_REGINFO

 /*
  * Board initialisation callbacks
  */
 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_MISC_INIT_R
 #define CONFIG_LAST_STAGE_INIT

 #else /* CONFIG_TRAILBLAZER */

 #define CONFIG_BOARD_EARLY_INIT_R
 #define CONFIG_LAST_STAGE_INIT

 #endif /* CONFIG_TRAILBLAZER */

 /*
  * Miscellaneous configurable options
  */
 #define CONFIG_HW_WATCHDOG
 #define CONFIG_LOADS_ECHO
 #define CONFIG_SYS_LOADS_BAUD_CHANGE

 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 64 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CONFIG_SYS_BOOTMAPSZ	(64 << 20)	/* Initial Linux Memory map */
 #define CONFIG_SYS_BOOTM_LEN	(64 << 20)	/* Increase max gunzip size */

 /*
  * Environment Configuration
  */

 #ifdef CONFIG_TRAILBLAZER

 #define CONFIG_BAUDRATE	115200

 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"mp_holdoff=1\0"

 #else

 #define CONFIG_HOSTNAME		controlcenterd
 #define CONFIG_ROOTPATH		"/opt/nfsroot"
 #define CONFIG_BOOTFILE		"uImage"
 #define CONFIG_UBOOTPATH	u-boot.bin	/* U-Boot image on TFTP */

 #define CONFIG_LOADADDR		1000000


 #define CONFIG_BAUDRATE	115200

 #define	CONFIG_EXTRA_ENV_SETTINGS				\
 	"netdev=eth0\0"						\
 	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0"		\
 	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0"	\
 	"tftpflash=tftpboot $loadaddr $uboot && "		\
 		"protect off $ubootaddr +$filesize && "		\
 		"erase $ubootaddr +$filesize && "		\
 		"cp.b $loadaddr $ubootaddr $filesize && "	\
 		"protect on $ubootaddr +$filesize && "		\
 		"cmp.b $loadaddr $ubootaddr $filesize\0"	\
 	"consoledev=ttyS1\0"					\
 	"ramdiskaddr=2000000\0"					\
 	"ramdiskfile=rootfs.ext2.gz.uboot\0"			\
 	"fdtaddr=1e00000\0"					\
 	"fdtfile=controlcenterd.dtb\0"				\
 	"bdev=sda3\0"

 /* these are used and NUL-terminated in env_default.h */
 #define CONFIG_NFSBOOTCOMMAND						\
 	"setenv bootargs root=/dev/nfs rw "				\
 	"nfsroot=$serverip:$rootpath "					\
 	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
 	"console=$consoledev,$baudrate $othbootargs $videobootargs;"	\
 	"tftp $loadaddr $bootfile;"					\
 	"tftp $fdtaddr $fdtfile;"					\
 	"bootm $loadaddr - $fdtaddr"

 #define CONFIG_RAMBOOTCOMMAND						\
 	"setenv bootargs root=/dev/ram rw "				\
 	"console=$consoledev,$baudrate $othbootargs $videobootargs;"	\
 	"tftp $ramdiskaddr $ramdiskfile;"				\
 	"tftp $loadaddr $bootfile;"					\
 	"tftp $fdtaddr $fdtfile;"					\
 	"bootm $loadaddr $ramdiskaddr $fdtaddr"

 #define CONFIG_BOOTCOMMAND		CONFIG_RAMBOOTCOMMAND

 #endif /* CONFIG_TRAILBLAZER */

 #endif
	/*
	* (C) Copyright 2013
	* Dirk Eibach, Guntermann & Drunck GmbH, dirk.eibach@gdsys.cc
	*
	* based on P1022DS.h
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#ifndef __CONFIG_H
	#define __CONFIG_H

	#ifdef CONFIG_SDCARD
	#define CONFIG_RAMBOOT_SDCARD
	#endif

	#ifdef CONFIG_SPIFLASH
	#define CONFIG_RAMBOOT_SPIFLASH
	#endif

	/* High Level Configuration Options */
	#define CONFIG_CONTROLCENTERD
	#define CONFIG_MP /* support multiple processors */

	#define CONFIG_SYS_NO_FLASH
	#define CONFIG_ENABLE_36BIT_PHYS

	#ifdef CONFIG_PHYS_64BIT
	#define CONFIG_ADDR_MAP
	#define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */
	#endif

	#define CONFIG_L2_CACHE
	#define CONFIG_BTB

	#define CONFIG_SYS_CLK_FREQ 66666600
	#define CONFIG_DDR_CLK_FREQ 66666600

	#define CONFIG_SYS_RAMBOOT

	#ifdef CONFIG_TRAILBLAZER

	#define CONFIG_SYS_TEXT_BASE 0xf8fc0000
	#define CONFIG_RESET_VECTOR_ADDRESS 0xf8fffffc
	#define CONFIG_SYS_MONITOR_LEN (256 * 1024)

	/*
	* Config the L2 Cache
	*/
	#define CONFIG_SYS_INIT_L2_ADDR 0xf8fc0000
	#ifdef CONFIG_PHYS_64BIT
	#define CONFIG_SYS_INIT_L2_ADDR_PHYS 0xff8fc0000ull
	#else
	#define CONFIG_SYS_INIT_L2_ADDR_PHYS CONFIG_SYS_INIT_L2_ADDR
	#endif
	#define CONFIG_SYS_L2_SIZE (256 << 10)
	#define CONFIG_SYS_INIT_L2_END (CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)

	#else /* CONFIG_TRAILBLAZER */

	#define CONFIG_SYS_TEXT_BASE 0x11000000
	#define CONFIG_RESET_VECTOR_ADDRESS 0x1107fffc
	#define CONFIG_SYS_MONITOR_LEN (512 * 1024)

	#endif /* CONFIG_TRAILBLAZER */

	#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)

	/*
	* Memory map
	*
	* 0x0000_0000 0x3fff_ffff DDR 1G Cacheable
	* 0xc000_0000 0xdfff_ffff PCI Express Mem 512M non-cacheable
	* 0xffc0_0000 0xffc2_ffff PCI IO range 192K non-cacheable
	*
	* Localbus non-cacheable
	* 0xe000_0000 0xe00f_ffff eLBC 1M non-cacheable
	* 0xf8fc0000 0xf8ff_ffff L2 SRAM 256k Cacheable
	* 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0
	* 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable
	*/

	#define CONFIG_SYS_INIT_RAM_LOCK
	#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */
	#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* used area in RAM */
	#define CONFIG_SYS_GBL_DATA_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET

	#ifdef CONFIG_TRAILBLAZER
	/* leave CCSRBAR at default, because u-boot expects it to be exactly there */
	#define CONFIG_SYS_CCSRBAR CONFIG_SYS_CCSRBAR_DEFAULT
	#else
	#define CONFIG_SYS_CCSRBAR 0xffe00000
	#endif
	#define CONFIG_SYS_CCSRBAR_PHYS_LOW CONFIG_SYS_CCSRBAR
	#define CONFIG_SYS_MPC85xx_GPIO3_ADDR (CONFIG_SYS_CCSRBAR+0xf200)

	/*
	* DDR Setup
	*/

	#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000
	#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE
	#define CONFIG_SYS_SDRAM_SIZE 1024
	#define CONFIG_VERY_BIG_RAM

	#define CONFIG_DIMM_SLOTS_PER_CTLR 1
	#define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR)

	#define CONFIG_SYS_MEMTEST_START 0x00000000
	#define CONFIG_SYS_MEMTEST_END 0x3fffffff

	#ifdef CONFIG_TRAILBLAZER
	#define CONFIG_SPD_EEPROM
	#define SPD_EEPROM_ADDRESS 0x52
	/#define CONFIG_FSL_DDR_INTERACTIVE/
	#endif

	/*
	* Local Bus Definitions
	*/
	#define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */

	#define CONFIG_SYS_ELBC_BASE 0xe0000000
	#ifdef CONFIG_PHYS_64BIT
	#define CONFIG_SYS_ELBC_BASE_PHYS 0xfe0000000ull
	#else
	#define CONFIG_SYS_ELBC_BASE_PHYS CONFIG_SYS_ELBC_BASE
	#endif

	#define CONFIG_UART_BR_PRELIM \
	(BR_PHYS_ADDR((CONFIG_SYS_ELBC_BASE_PHYS)) \| BR_PS_8 \| BR_V)
	#define CONFIG_UART_OR_PRELIM (OR_AM_32KB \| 0xff7)

	#define CONFIG_SYS_BR0_PRELIM 0 /* CS0 was originally intended for FPGA */
	#define CONFIG_SYS_OR0_PRELIM 0 /* debugging, was never used */

	#define CONFIG_SYS_BR1_PRELIM CONFIG_UART_BR_PRELIM
	#define CONFIG_SYS_OR1_PRELIM CONFIG_UART_OR_PRELIM

	/*
	* Serial Port
	*/
	#define CONFIG_CONS_INDEX 2
	#define CONFIG_SYS_NS16550_SERIAL
	#define CONFIG_SYS_NS16550_REG_SIZE 1
	#define CONFIG_SYS_NS16550_CLK get_bus_freq(0)

	#define CONFIG_SYS_BAUDRATE_TABLE \
	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}

	#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
	#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)

	/*
	* I2C
	*/
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_FSL
	#define CONFIG_SYS_FSL_I2C_SPEED 400000
	#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
	#define CONFIG_SYS_FSL_I2C_OFFSET 0x3000
	#define CONFIG_SYS_FSL_I2C2_SPEED 400000
	#define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F
	#define CONFIG_SYS_FSL_I2C2_OFFSET 0x3100

	#ifndef CONFIG_TRAILBLAZER
	#endif

	#define CONFIG_PCA9698 /* NXP PCA9698 */

	#define CONFIG_CMD_EEPROM
	#define CONFIG_SYS_I2C_EEPROM_ADDR 0x52
	#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2

	#ifndef CONFIG_TRAILBLAZER
	/*
	* eSPI - Enhanced SPI
	*/
	#define CONFIG_HARD_SPI

	#define CONFIG_SF_DEFAULT_SPEED 10000000
	#define CONFIG_SF_DEFAULT_MODE 0
	#endif

	#define CONFIG_SHA1

	/*
	* MMC
	*/
	#define CONFIG_GENERIC_MMC

	#define CONFIG_FSL_ESDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR

	#ifndef CONFIG_TRAILBLAZER

	/*
	* Video
	*/
	#define CONFIG_FSL_DIU_FB
	#define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x10000)
	#define CONFIG_CMD_BMP

	/*
	* General PCI
	* Memory space is mapped 1-1, but I/O space must start from 0.
	*/
	#define CONFIG_PCIE1 /* PCIE controller 1 (slot 1) */
	#define CONFIG_PCI_INDIRECT_BRIDGE
	#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */
	#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */
	#define CONFIG_CMD_PCI

	#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */
	#define CONFIG_FSL_PCIE_RESET /* need PCIe reset errata */

	#define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000
	#ifdef CONFIG_PHYS_64BIT
	#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000
	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull
	#else
	#define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000
	#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000
	#endif
	#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */
	#define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000
	#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000
	#ifdef CONFIG_PHYS_64BIT
	#define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull
	#else
	#define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000
	#endif
	#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */

	/*
	* SATA
	*/
	#define CONFIG_LIBATA
	#define CONFIG_LBA48
	#define CONFIG_CMD_SATA

	#define CONFIG_FSL_SATA
	#define CONFIG_SYS_SATA_MAX_DEVICE 2
	#define CONFIG_SATA1
	#define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR
	#define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA
	#define CONFIG_SATA2
	#define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR
	#define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA

	/*
	* Ethernet
	*/
	#define CONFIG_TSEC_ENET

	#define CONFIG_TSECV2

	#define CONFIG_MII /* MII PHY management */
	#define CONFIG_TSEC1 1
	#define CONFIG_TSEC1_NAME "eTSEC1"
	#define CONFIG_TSEC2 1
	#define CONFIG_TSEC2_NAME "eTSEC2"

	#define TSEC1_PHY_ADDR 0
	#define TSEC2_PHY_ADDR 1

	#define TSEC1_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)
	#define TSEC2_FLAGS (TSEC_GIGABIT \| TSEC_REDUCED)

	#define TSEC1_PHYIDX 0
	#define TSEC2_PHYIDX 0

	#define CONFIG_ETHPRIME "eTSEC1"

	#define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */

	/*
	* USB
	*/
	#define CONFIG_USB_EHCI

	#define CONFIG_HAS_FSL_DR_USB
	#define CONFIG_USB_EHCI_FSL
	#define CONFIG_EHCI_HCD_INIT_AFTER_RESET

	#endif /* CONFIG_TRAILBLAZER */

	/*
	* Environment
	*/
	#if defined(CONFIG_TRAILBLAZER)
	#define CONFIG_ENV_IS_NOWHERE
	#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
	#elif defined(CONFIG_RAMBOOT_SPIFLASH)
	#define CONFIG_ENV_IS_IN_SPI_FLASH
	#define CONFIG_ENV_SPI_BUS 0
	#define CONFIG_ENV_SPI_CS 0
	#define CONFIG_ENV_SPI_MAX_HZ 10000000
	#define CONFIG_ENV_SPI_MODE 0
	#define CONFIG_ENV_SIZE 0x2000 /* 8KB */
	#define CONFIG_ENV_OFFSET 0x100000 /* 1MB */
	#define CONFIG_ENV_SECT_SIZE 0x10000
	#elif defined(CONFIG_RAMBOOT_SDCARD)
	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_FSL_FIXED_MMC_LOCATION
	#define CONFIG_ENV_SIZE 0x2000
	#define CONFIG_SYS_MMC_ENV_DEV 0
	#endif

	#define CONFIG_SYS_EXTRA_ENV_RELOC

	/*
	* Command line configuration.
	*/
	#ifndef CONFIG_TRAILBLAZER
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_CMDLINE_EDITING /* Command-line editing */
	#define CONFIG_AUTO_COMPLETE /* add autocompletion support */
	#endif /* CONFIG_TRAILBLAZER */

	#define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */
	#ifdef CONFIG_CMD_KGDB
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
	#else
	#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
	#endif
	/* Print Buffer Size */
	#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	#define CONFIG_SYS_MAXARGS 16
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE

	#ifndef CONFIG_TRAILBLAZER

	#define CONFIG_CMD_ERRATA
	#define CONFIG_CMD_IRQ
	#define CONFIG_CMD_REGINFO

	/*
	* Board initialisation callbacks
	*/
	#define CONFIG_BOARD_EARLY_INIT_R
	#define CONFIG_MISC_INIT_R
	#define CONFIG_LAST_STAGE_INIT

	#else /* CONFIG_TRAILBLAZER */

	#define CONFIG_BOARD_EARLY_INIT_R
	#define CONFIG_LAST_STAGE_INIT

	#endif /* CONFIG_TRAILBLAZER */

	/*
	* Miscellaneous configurable options
	*/
	#define CONFIG_HW_WATCHDOG
	#define CONFIG_LOADS_ECHO
	#define CONFIG_SYS_LOADS_BAUD_CHANGE

	/*
	* For booting Linux, the board info and command line data
	* have to be in the first 64 MB of memory, since this is
	* the maximum mapped by the Linux kernel during initialization.
	*/
	#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Linux Memory map */
	#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */

	/*
	* Environment Configuration
	*/

	#ifdef CONFIG_TRAILBLAZER

	#define CONFIG_BAUDRATE 115200

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"mp_holdoff=1\0"

	#else

	#define CONFIG_HOSTNAME controlcenterd
	#define CONFIG_ROOTPATH "/opt/nfsroot"
	#define CONFIG_BOOTFILE "uImage"
	#define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP */

	#define CONFIG_LOADADDR 1000000


	#define CONFIG_BAUDRATE 115200

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"netdev=eth0\0" \
	"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
	"ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \
	"tftpflash=tftpboot $loadaddr $uboot && " \
	"protect off $ubootaddr +$filesize && " \
	"erase $ubootaddr +$filesize && " \
	"cp.b $loadaddr $ubootaddr $filesize && " \
	"protect on $ubootaddr +$filesize && " \
	"cmp.b $loadaddr $ubootaddr $filesize\0" \
	"consoledev=ttyS1\0" \
	"ramdiskaddr=2000000\0" \
	"ramdiskfile=rootfs.ext2.gz.uboot\0" \
	"fdtaddr=1e00000\0" \
	"fdtfile=controlcenterd.dtb\0" \
	"bdev=sda3\0"

	/* these are used and NUL-terminated in env_default.h */
	#define CONFIG_NFSBOOTCOMMAND \
	"setenv bootargs root=/dev/nfs rw " \
	"nfsroot=$serverip:$rootpath " \
	"ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \
	"console=$consoledev,$baudrate $othbootargs $videobootargs;" \
	"tftp $loadaddr $bootfile;" \
	"tftp $fdtaddr $fdtfile;" \
	"bootm $loadaddr - $fdtaddr"

	#define CONFIG_RAMBOOTCOMMAND \
	"setenv bootargs root=/dev/ram rw " \
	"console=$consoledev,$baudrate $othbootargs $videobootargs;" \
	"tftp $ramdiskaddr $ramdiskfile;" \
	"tftp $loadaddr $bootfile;" \
	"tftp $fdtaddr $fdtfile;" \
	"bootm $loadaddr $ramdiskaddr $fdtaddr"

	#define CONFIG_BOOTCOMMAND CONFIG_RAMBOOTCOMMAND

	#endif /* CONFIG_TRAILBLAZER */

	#endif