| /* |
| * (C) Copyright 2003 |
| * DAVE Srl |
| * http://www.dave-tech.it |
| * http://www.wawnet.biz |
| * mailto:info@wawnet.biz |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/processor.h> |
| #include <command.h> |
| #include <malloc.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| /* Prototypes */ |
| int gunzip(void *, int, unsigned char *, unsigned long *); |
| |
| int board_early_init_f (void) |
| { |
| out32(GPIO0_OR, CONFIG_SYS_NAND0_CE); /* set initial outputs */ |
| out32(GPIO0_OR, CONFIG_SYS_NAND1_CE); /* set initial outputs */ |
| |
| /* |
| * IRQ 0-15 405GP internally generated; active high; level sensitive |
| * IRQ 16 405GP internally generated; active low; level sensitive |
| * IRQ 17-24 RESERVED |
| * IRQ 25 (EXT IRQ 0) |
| * IRQ 26 (EXT IRQ 1) |
| * IRQ 27 (EXT IRQ 2) |
| * IRQ 28 (EXT IRQ 3) |
| * IRQ 29 (EXT IRQ 4) |
| * IRQ 30 (EXT IRQ 5) |
| * IRQ 31 (EXT IRQ 6) |
| */ |
| mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ |
| mtdcr(uicer, 0x00000000); /* disable all ints */ |
| mtdcr(uiccr, 0x00000000); /* set all to be non-critical*/ |
| mtdcr(uicpr, 0xFFFFFF80); /* set int polarities */ |
| mtdcr(uictr, 0x10000000); /* set int trigger levels */ |
| mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority*/ |
| mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */ |
| |
| /* |
| * EBC Configuration Register: set ready timeout to 512 ebc-clks -> ca. 15 us |
| */ |
| #if 1 /* test-only */ |
| mtebc (EBC0_CFG, 0xa8400000); /* ebc always driven */ |
| #else |
| mtebc (EBC0_CFG, 0x28400000); /* ebc in high-z */ |
| #endif |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| int misc_init_f (void) |
| { |
| return 0; /* dummy implementation */ |
| } |
| |
| extern flash_info_t flash_info[]; /* info for FLASH chips */ |
| |
| int misc_init_r (void) |
| { |
| /* adjust flash start and size as well as the offset */ |
| gd->bd->bi_flashstart = 0 - flash_info[0].size; |
| gd->bd->bi_flashoffset= flash_info[0].size - CONFIG_SYS_MONITOR_LEN; |
| #if 0 |
| volatile unsigned short *fpga_mode = |
| (unsigned short *)((ulong)CONFIG_SYS_FPGA_BASE_ADDR + CONFIG_SYS_FPGA_CTRL); |
| volatile unsigned char *duart0_mcr = |
| (unsigned char *)((ulong)DUART0_BA + 4); |
| volatile unsigned char *duart1_mcr = |
| (unsigned char *)((ulong)DUART1_BA + 4); |
| |
| bd_t *bd = gd->bd; |
| char * tmp; /* Temporary char pointer */ |
| unsigned char *dst; |
| ulong len = sizeof(fpgadata); |
| int status; |
| int index; |
| int i; |
| unsigned long CPC0_CR0Reg; |
| |
| dst = malloc(CONFIG_SYS_FPGA_MAX_SIZE); |
| if (gunzip (dst, CONFIG_SYS_FPGA_MAX_SIZE, (uchar *)fpgadata, &len) != 0) { |
| printf ("GUNZIP ERROR - must RESET board to recover\n"); |
| do_reset (NULL, 0, 0, NULL); |
| } |
| |
| status = fpga_boot(dst, len); |
| if (status != 0) { |
| printf("\nFPGA: Booting failed "); |
| switch (status) { |
| case ERROR_FPGA_PRG_INIT_LOW: |
| printf("(Timeout: INIT not low after asserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_INIT_HIGH: |
| printf("(Timeout: INIT not high after deasserting PROGRAM*)\n "); |
| break; |
| case ERROR_FPGA_PRG_DONE: |
| printf("(Timeout: DONE not high after programming FPGA)\n "); |
| break; |
| } |
| |
| /* display infos on fpgaimage */ |
| index = 15; |
| for (i=0; i<4; i++) { |
| len = dst[index]; |
| printf("FPGA: %s\n", &(dst[index+1])); |
| index += len+3; |
| } |
| putc ('\n'); |
| /* delayed reboot */ |
| for (i=20; i>0; i--) { |
| printf("Rebooting in %2d seconds \r",i); |
| for (index=0;index<1000;index++) |
| udelay(1000); |
| } |
| putc ('\n'); |
| do_reset(NULL, 0, 0, NULL); |
| } |
| |
| puts("FPGA: "); |
| |
| /* display infos on fpgaimage */ |
| index = 15; |
| for (i=0; i<4; i++) { |
| len = dst[index]; |
| printf("%s ", &(dst[index+1])); |
| index += len+3; |
| } |
| putc ('\n'); |
| |
| free(dst); |
| |
| /* |
| * Reset FPGA via FPGA_DATA pin |
| */ |
| SET_FPGA(FPGA_PRG | FPGA_CLK); |
| udelay(1000); /* wait 1ms */ |
| SET_FPGA(FPGA_PRG | FPGA_CLK | FPGA_DATA); |
| udelay(1000); /* wait 1ms */ |
| #endif |
| |
| #if 0 |
| /* |
| * Enable power on PS/2 interface |
| */ |
| *fpga_mode |= CONFIG_SYS_FPGA_CTRL_PS2_RESET; |
| |
| /* |
| * Enable interrupts in exar duart mcr[3] |
| */ |
| *duart0_mcr = 0x08; |
| *duart1_mcr = 0x08; |
| #endif |
| return (0); |
| } |
| |
| /* |
| * Check Board Identity: |
| */ |
| |
| int checkboard (void) |
| { |
| char str[64]; |
| int i = getenv_r ("serial#", str, sizeof(str)); |
| |
| puts ("Board: "); |
| |
| if (i == -1) { |
| puts ("### No HW ID - assuming PPChameleonEVB"); |
| } else { |
| puts(str); |
| } |
| |
| putc ('\n'); |
| |
| return 0; |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| int testdram (void) |
| { |
| /* TODO: XXX XXX XXX */ |
| printf ("test: 16 MB - ok\n"); |
| |
| return (0); |
| } |
| |
| /* ------------------------------------------------------------------------- */ |
| |
| #ifdef CONFIG_CFB_CONSOLE |
| # ifdef CONFIG_CONSOLE_EXTRA_INFO |
| # include <video_fb.h> |
| extern GraphicDevice smi; |
| |
| void video_get_info_str (int line_number, char *info) |
| { |
| uint pvr = get_pvr (); |
| |
| /* init video info strings for graphic console */ |
| switch (line_number) { |
| case 1: |
| switch (pvr) { |
| case PVR_405EP_RB: |
| sprintf (info, " AMCC PowerPC 405EP Rev. B"); |
| break; |
| default: |
| sprintf (info, " AMCC PowerPC 405EP Rev. <unknown>"); |
| break; |
| } |
| return; |
| case 2: |
| sprintf (info, " DAVE Srl PPChameleonEVB - www.dave-tech.it"); |
| return; |
| case 3: |
| sprintf (info, " %s", smi.modeIdent); |
| return; |
| } |
| |
| /* no more info lines */ |
| *info = 0; |
| return; |
| } |
| # endif /* CONFIG_CONSOLE_EXTRA_INFO */ |
| #endif /* CONFIG_CFB_CONSOLE */ |