| /* |
| * (C) Copyright 2007 |
| * Sascha Hauer, Pengutronix |
| * |
| * (C) Copyright 2009 Freescale Semiconductor, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/sys_proto.h> |
| |
| #include <asm/errno.h> |
| #include <asm/io.h> |
| |
| #ifdef CONFIG_FSL_ESDHC |
| #include <fsl_esdhc.h> |
| #endif |
| |
| #if !(defined(CONFIG_MX51) || defined(CONFIG_MX53)) |
| #error "CPU_TYPE not defined" |
| #endif |
| |
| u32 get_cpu_rev(void) |
| { |
| #ifdef CONFIG_MX51 |
| int system_rev = 0x51000; |
| #else |
| int system_rev = 0x53000; |
| #endif |
| int reg = __raw_readl(ROM_SI_REV); |
| |
| #if defined(CONFIG_MX51) |
| switch (reg) { |
| case 0x02: |
| system_rev |= CHIP_REV_1_1; |
| break; |
| case 0x10: |
| if ((__raw_readl(GPIO1_BASE_ADDR + 0x0) & (0x1 << 22)) == 0) |
| system_rev |= CHIP_REV_2_5; |
| else |
| system_rev |= CHIP_REV_2_0; |
| break; |
| case 0x20: |
| system_rev |= CHIP_REV_3_0; |
| break; |
| default: |
| system_rev |= CHIP_REV_1_0; |
| break; |
| } |
| #else |
| if (reg < 0x20) |
| system_rev |= CHIP_REV_1_0; |
| else |
| system_rev |= reg; |
| #endif |
| return system_rev; |
| } |
| |
| static char *get_reset_cause(void) |
| { |
| u32 cause; |
| struct src *src_regs = (struct src *)SRC_BASE_ADDR; |
| |
| cause = readl(&src_regs->srsr); |
| writel(cause, &src_regs->srsr); |
| |
| switch (cause) { |
| case 0x00001: |
| return "POR"; |
| case 0x00004: |
| return "CSU"; |
| case 0x00008: |
| return "IPP USER"; |
| case 0x00010: |
| return "WDOG"; |
| case 0x00020: |
| return "JTAG HIGH-Z"; |
| case 0x00040: |
| return "JTAG SW"; |
| case 0x10000: |
| return "WARM BOOT"; |
| default: |
| return "unknown reset"; |
| } |
| } |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| u32 cpurev; |
| |
| cpurev = get_cpu_rev(); |
| printf("CPU: Freescale i.MX%x family rev%d.%d at %d MHz\n", |
| (cpurev & 0xFF000) >> 12, |
| (cpurev & 0x000F0) >> 4, |
| (cpurev & 0x0000F) >> 0, |
| mxc_get_clock(MXC_ARM_CLK) / 1000000); |
| printf("Reset cause: %s\n", get_reset_cause()); |
| return 0; |
| } |
| #endif |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| int rc = -ENODEV; |
| |
| #if defined(CONFIG_FEC_MXC) |
| rc = fecmxc_initialize(bis); |
| #endif |
| |
| return rc; |
| } |
| |
| #if defined(CONFIG_FEC_MXC) |
| void imx_get_mac_from_fuse(unsigned char *mac) |
| { |
| int i; |
| struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE; |
| struct fuse_bank *bank = &iim->bank[1]; |
| struct fuse_bank1_regs *fuse = |
| (struct fuse_bank1_regs *)bank->fuse_regs; |
| |
| for (i = 0; i < 6; i++) |
| mac[i] = readl(&fuse->mac_addr[i]) & 0xff; |
| } |
| #endif |
| |
| /* |
| * Initializes on-chip MMC controllers. |
| * to override, implement board_mmc_init() |
| */ |
| int cpu_mmc_init(bd_t *bis) |
| { |
| #ifdef CONFIG_FSL_ESDHC |
| return fsl_esdhc_mmc_init(bis); |
| #else |
| return 0; |
| #endif |
| } |
| |
| void set_chipselect_size(int const cs_size) |
| { |
| unsigned int reg; |
| struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; |
| reg = readl(&iomuxc_regs->gpr1); |
| |
| switch (cs_size) { |
| case CS0_128: |
| reg &= ~0x7; /* CS0=128MB, CS1=0, CS2=0, CS3=0 */ |
| reg |= 0x5; |
| break; |
| case CS0_64M_CS1_64M: |
| reg &= ~0x3F; /* CS0=64MB, CS1=64MB, CS2=0, CS3=0 */ |
| reg |= 0x1B; |
| break; |
| case CS0_64M_CS1_32M_CS2_32M: |
| reg &= ~0x1FF; /* CS0=64MB, CS1=32MB, CS2=32MB, CS3=0 */ |
| reg |= 0x4B; |
| break; |
| case CS0_32M_CS1_32M_CS2_32M_CS3_32M: |
| reg &= ~0xFFF; /* CS0=32MB, CS1=32MB, CS2=32MB, CS3=32MB */ |
| reg |= 0x249; |
| break; |
| default: |
| printf("Unknown chip select size: %d\n", cs_size); |
| break; |
| } |
| |
| writel(reg, &iomuxc_regs->gpr1); |
| } |
| |
| void reset_cpu(ulong addr) |
| { |
| __raw_writew(4, WDOG1_BASE_ADDR); |
| } |