| /* |
| * (C) Copyright 2007 |
| * Sascha Hauer, Pengutronix |
| * |
| * (C) Copyright 2009 Freescale Semiconductor, Inc. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/io.h> |
| #include <asm/errno.h> |
| #include <asm/arch/imx-regs.h> |
| #include <asm/arch/crm_regs.h> |
| #include <asm/arch/clock.h> |
| #include <div64.h> |
| |
| enum pll_clocks { |
| PLL1_CLOCK = 0, |
| PLL2_CLOCK, |
| PLL3_CLOCK, |
| PLL4_CLOCK, |
| PLL_CLOCKS, |
| }; |
| |
| struct mxc_pll_reg *mxc_plls[PLL_CLOCKS] = { |
| [PLL1_CLOCK] = (struct mxc_pll_reg *)PLL1_BASE_ADDR, |
| [PLL2_CLOCK] = (struct mxc_pll_reg *)PLL2_BASE_ADDR, |
| [PLL3_CLOCK] = (struct mxc_pll_reg *)PLL3_BASE_ADDR, |
| #ifdef CONFIG_MX53 |
| [PLL4_CLOCK] = (struct mxc_pll_reg *)PLL4_BASE_ADDR, |
| #endif |
| }; |
| |
| struct mxc_ccm_reg *mxc_ccm = (struct mxc_ccm_reg *)MXC_CCM_BASE; |
| |
| /* |
| * Calculate the frequency of PLLn. |
| */ |
| static uint32_t decode_pll(struct mxc_pll_reg *pll, uint32_t infreq) |
| { |
| uint32_t ctrl, op, mfd, mfn, mfi, pdf, ret; |
| uint64_t refclk, temp; |
| int32_t mfn_abs; |
| |
| ctrl = readl(&pll->ctrl); |
| |
| if (ctrl & MXC_DPLLC_CTL_HFSM) { |
| mfn = __raw_readl(&pll->hfs_mfn); |
| mfd = __raw_readl(&pll->hfs_mfd); |
| op = __raw_readl(&pll->hfs_op); |
| } else { |
| mfn = __raw_readl(&pll->mfn); |
| mfd = __raw_readl(&pll->mfd); |
| op = __raw_readl(&pll->op); |
| } |
| |
| mfd &= MXC_DPLLC_MFD_MFD_MASK; |
| mfn &= MXC_DPLLC_MFN_MFN_MASK; |
| pdf = op & MXC_DPLLC_OP_PDF_MASK; |
| mfi = (op & MXC_DPLLC_OP_MFI_MASK) >> MXC_DPLLC_OP_MFI_OFFSET; |
| |
| /* 21.2.3 */ |
| if (mfi < 5) |
| mfi = 5; |
| |
| /* Sign extend */ |
| if (mfn >= 0x04000000) { |
| mfn |= 0xfc000000; |
| mfn_abs = -mfn; |
| } else |
| mfn_abs = mfn; |
| |
| refclk = infreq * 2; |
| if (ctrl & MXC_DPLLC_CTL_DPDCK0_2_EN) |
| refclk *= 2; |
| |
| refclk /= pdf + 1; |
| temp = refclk * mfn_abs; |
| do_div(temp, mfd + 1); |
| ret = refclk * mfi; |
| |
| if ((int)mfn < 0) |
| ret -= temp; |
| else |
| ret += temp; |
| |
| return ret; |
| } |
| |
| /* |
| * Get mcu main rate |
| */ |
| u32 get_mcu_main_clk(void) |
| { |
| u32 reg, freq; |
| |
| reg = (__raw_readl(&mxc_ccm->cacrr) & MXC_CCM_CACRR_ARM_PODF_MASK) >> |
| MXC_CCM_CACRR_ARM_PODF_OFFSET; |
| freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); |
| return freq / (reg + 1); |
| } |
| |
| /* |
| * Get the rate of peripheral's root clock. |
| */ |
| static u32 get_periph_clk(void) |
| { |
| u32 reg; |
| |
| reg = __raw_readl(&mxc_ccm->cbcdr); |
| if (!(reg & MXC_CCM_CBCDR_PERIPH_CLK_SEL)) |
| return decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK); |
| reg = __raw_readl(&mxc_ccm->cbcmr); |
| switch ((reg & MXC_CCM_CBCMR_PERIPH_CLK_SEL_MASK) >> |
| MXC_CCM_CBCMR_PERIPH_CLK_SEL_OFFSET) { |
| case 0: |
| return decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); |
| case 1: |
| return decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK); |
| default: |
| return 0; |
| } |
| /* NOTREACHED */ |
| } |
| |
| /* |
| * Get the rate of ahb clock. |
| */ |
| static u32 get_ahb_clk(void) |
| { |
| uint32_t freq, div, reg; |
| |
| freq = get_periph_clk(); |
| |
| reg = __raw_readl(&mxc_ccm->cbcdr); |
| div = ((reg & MXC_CCM_CBCDR_AHB_PODF_MASK) >> |
| MXC_CCM_CBCDR_AHB_PODF_OFFSET) + 1; |
| |
| return freq / div; |
| } |
| |
| /* |
| * Get the rate of ipg clock. |
| */ |
| static u32 get_ipg_clk(void) |
| { |
| uint32_t freq, reg, div; |
| |
| freq = get_ahb_clk(); |
| |
| reg = __raw_readl(&mxc_ccm->cbcdr); |
| div = ((reg & MXC_CCM_CBCDR_IPG_PODF_MASK) >> |
| MXC_CCM_CBCDR_IPG_PODF_OFFSET) + 1; |
| |
| return freq / div; |
| } |
| |
| /* |
| * Get the rate of ipg_per clock. |
| */ |
| static u32 get_ipg_per_clk(void) |
| { |
| u32 pred1, pred2, podf; |
| |
| if (__raw_readl(&mxc_ccm->cbcmr) & MXC_CCM_CBCMR_PERCLK_IPG_CLK_SEL) |
| return get_ipg_clk(); |
| /* Fixme: not handle what about lpm*/ |
| podf = __raw_readl(&mxc_ccm->cbcdr); |
| pred1 = (podf & MXC_CCM_CBCDR_PERCLK_PRED1_MASK) >> |
| MXC_CCM_CBCDR_PERCLK_PRED1_OFFSET; |
| pred2 = (podf & MXC_CCM_CBCDR_PERCLK_PRED2_MASK) >> |
| MXC_CCM_CBCDR_PERCLK_PRED2_OFFSET; |
| podf = (podf & MXC_CCM_CBCDR_PERCLK_PODF_MASK) >> |
| MXC_CCM_CBCDR_PERCLK_PODF_OFFSET; |
| |
| return get_periph_clk() / ((pred1 + 1) * (pred2 + 1) * (podf + 1)); |
| } |
| |
| /* |
| * Get the rate of uart clk. |
| */ |
| static u32 get_uart_clk(void) |
| { |
| unsigned int freq, reg, pred, podf; |
| |
| reg = __raw_readl(&mxc_ccm->cscmr1); |
| switch ((reg & MXC_CCM_CSCMR1_UART_CLK_SEL_MASK) >> |
| MXC_CCM_CSCMR1_UART_CLK_SEL_OFFSET) { |
| case 0x0: |
| freq = decode_pll(mxc_plls[PLL1_CLOCK], |
| CONFIG_SYS_MX5_HCLK); |
| break; |
| case 0x1: |
| freq = decode_pll(mxc_plls[PLL2_CLOCK], |
| CONFIG_SYS_MX5_HCLK); |
| break; |
| case 0x2: |
| freq = decode_pll(mxc_plls[PLL3_CLOCK], |
| CONFIG_SYS_MX5_HCLK); |
| break; |
| default: |
| return 66500000; |
| } |
| |
| reg = __raw_readl(&mxc_ccm->cscdr1); |
| |
| pred = (reg & MXC_CCM_CSCDR1_UART_CLK_PRED_MASK) >> |
| MXC_CCM_CSCDR1_UART_CLK_PRED_OFFSET; |
| |
| podf = (reg & MXC_CCM_CSCDR1_UART_CLK_PODF_MASK) >> |
| MXC_CCM_CSCDR1_UART_CLK_PODF_OFFSET; |
| freq /= (pred + 1) * (podf + 1); |
| |
| return freq; |
| } |
| |
| /* |
| * This function returns the low power audio clock. |
| */ |
| u32 get_lp_apm(void) |
| { |
| u32 ret_val = 0; |
| u32 ccsr = __raw_readl(&mxc_ccm->ccsr); |
| |
| if (((ccsr >> 9) & 1) == 0) |
| ret_val = CONFIG_SYS_MX5_HCLK; |
| else |
| ret_val = ((32768 * 1024)); |
| |
| return ret_val; |
| } |
| |
| /* |
| * get cspi clock rate. |
| */ |
| u32 imx_get_cspiclk(void) |
| { |
| u32 ret_val = 0, pdf, pre_pdf, clk_sel; |
| u32 cscmr1 = __raw_readl(&mxc_ccm->cscmr1); |
| u32 cscdr2 = __raw_readl(&mxc_ccm->cscdr2); |
| |
| pre_pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PRED_MASK) \ |
| >> MXC_CCM_CSCDR2_CSPI_CLK_PRED_OFFSET; |
| pdf = (cscdr2 & MXC_CCM_CSCDR2_CSPI_CLK_PODF_MASK) \ |
| >> MXC_CCM_CSCDR2_CSPI_CLK_PODF_OFFSET; |
| clk_sel = (cscmr1 & MXC_CCM_CSCMR1_CSPI_CLK_SEL_MASK) \ |
| >> MXC_CCM_CSCMR1_CSPI_CLK_SEL_OFFSET; |
| |
| switch (clk_sel) { |
| case 0: |
| ret_val = decode_pll(mxc_plls[PLL1_CLOCK], |
| CONFIG_SYS_MX5_HCLK) / |
| ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| case 1: |
| ret_val = decode_pll(mxc_plls[PLL2_CLOCK], |
| CONFIG_SYS_MX5_HCLK) / |
| ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| case 2: |
| ret_val = decode_pll(mxc_plls[PLL3_CLOCK], |
| CONFIG_SYS_MX5_HCLK) / |
| ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| default: |
| ret_val = get_lp_apm() / ((pre_pdf + 1) * (pdf + 1)); |
| break; |
| } |
| |
| return ret_val; |
| } |
| |
| /* |
| * The API of get mxc clockes. |
| */ |
| unsigned int mxc_get_clock(enum mxc_clock clk) |
| { |
| switch (clk) { |
| case MXC_ARM_CLK: |
| return get_mcu_main_clk(); |
| case MXC_AHB_CLK: |
| return get_ahb_clk(); |
| case MXC_IPG_CLK: |
| return get_ipg_clk(); |
| case MXC_IPG_PERCLK: |
| return get_ipg_per_clk(); |
| case MXC_UART_CLK: |
| return get_uart_clk(); |
| case MXC_CSPI_CLK: |
| return imx_get_cspiclk(); |
| case MXC_FEC_CLK: |
| return decode_pll(mxc_plls[PLL1_CLOCK], |
| CONFIG_SYS_MX5_HCLK); |
| default: |
| break; |
| } |
| return -1; |
| } |
| |
| u32 imx_get_uartclk(void) |
| { |
| return get_uart_clk(); |
| } |
| |
| |
| u32 imx_get_fecclk(void) |
| { |
| return mxc_get_clock(MXC_IPG_CLK); |
| } |
| |
| /* |
| * Dump some core clockes. |
| */ |
| int do_mx5_showclocks(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) |
| { |
| u32 freq; |
| |
| freq = decode_pll(mxc_plls[PLL1_CLOCK], CONFIG_SYS_MX5_HCLK); |
| printf("PLL1 %8d MHz\n", freq / 1000000); |
| freq = decode_pll(mxc_plls[PLL2_CLOCK], CONFIG_SYS_MX5_HCLK); |
| printf("PLL2 %8d MHz\n", freq / 1000000); |
| freq = decode_pll(mxc_plls[PLL3_CLOCK], CONFIG_SYS_MX5_HCLK); |
| printf("PLL3 %8d MHz\n", freq / 1000000); |
| #ifdef CONFIG_MX53 |
| freq = decode_pll(mxc_plls[PLL4_CLOCK], CONFIG_SYS_MX5_HCLK); |
| printf("PLL4 %8d MHz\n", freq / 1000000); |
| #endif |
| |
| printf("\n"); |
| printf("AHB %8d kHz\n", mxc_get_clock(MXC_AHB_CLK) / 1000); |
| printf("IPG %8d kHz\n", mxc_get_clock(MXC_IPG_CLK) / 1000); |
| printf("IPG PERCLK %8d kHz\n", mxc_get_clock(MXC_IPG_PERCLK) / 1000); |
| |
| return 0; |
| } |
| |
| /***************************************************/ |
| |
| U_BOOT_CMD( |
| clocks, CONFIG_SYS_MAXARGS, 1, do_mx5_showclocks, |
| "display clocks", |
| "" |
| ); |