| /* |
| * (C) Copyright 2000-2009 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <mpc5xxx.h> |
| #include <asm/io.h> |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| /* |
| * Breath some life into the CPU... |
| * |
| * Set up the memory map, |
| * initialize a bunch of registers. |
| */ |
| void cpu_init_f (void) |
| { |
| volatile struct mpc5xxx_mmap_ctl *mm = |
| (struct mpc5xxx_mmap_ctl *) CONFIG_SYS_MBAR; |
| volatile struct mpc5xxx_lpb *lpb = |
| (struct mpc5xxx_lpb *) MPC5XXX_LPB; |
| volatile struct mpc5xxx_cdm *cdm = |
| (struct mpc5xxx_cdm *) MPC5XXX_CDM; |
| volatile struct mpc5xxx_gpio *gpio = |
| (struct mpc5xxx_gpio *) MPC5XXX_GPIO; |
| volatile struct mpc5xxx_xlb *xlb = |
| (struct mpc5xxx_xlb *) MPC5XXX_XLBARB; |
| unsigned long addecr = (1 << 25); /* Boot_CS */ |
| #if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_MGT5100) |
| addecr |= (1 << 22); /* SDRAM enable */ |
| #endif |
| /* Pointer is writable since we allocated a register for it */ |
| gd = (gd_t *) (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); |
| |
| /* Clear initial global data */ |
| memset ((void *) gd, 0, sizeof (gd_t)); |
| |
| /* |
| * Memory Controller: configure chip selects and enable them |
| */ |
| #if defined(CONFIG_SYS_BOOTCS_START) && defined(CONFIG_SYS_BOOTCS_SIZE) |
| out_be32(&mm->boot_start, START_REG(CONFIG_SYS_BOOTCS_START)); |
| out_be32(&mm->boot_stop, STOP_REG(CONFIG_SYS_BOOTCS_START, |
| CONFIG_SYS_BOOTCS_SIZE)); |
| #endif |
| #if defined(CONFIG_SYS_BOOTCS_CFG) |
| out_be32(&lpb->cs0_cfg, CONFIG_SYS_BOOTCS_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS0_START) && defined(CONFIG_SYS_CS0_SIZE) |
| out_be32(&mm->cs0_start, START_REG(CONFIG_SYS_CS0_START)); |
| out_be32(&mm->cs0_stop, STOP_REG(CONFIG_SYS_CS0_START, |
| CONFIG_SYS_CS0_SIZE)); |
| /* CS0 and BOOT_CS cannot be enabled at once. */ |
| /* addecr |= (1 << 16); */ |
| #endif |
| #if defined(CONFIG_SYS_CS0_CFG) |
| out_be32(&lpb->cs0_cfg, CONFIG_SYS_CS0_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS1_START) && defined(CONFIG_SYS_CS1_SIZE) |
| out_be32(&mm->cs1_start, START_REG(CONFIG_SYS_CS1_START)); |
| out_be32(&mm->cs1_stop, STOP_REG(CONFIG_SYS_CS1_START, |
| CONFIG_SYS_CS1_SIZE)); |
| addecr |= (1 << 17); |
| #endif |
| #if defined(CONFIG_SYS_CS1_CFG) |
| out_be32(&lpb->cs1_cfg, CONFIG_SYS_CS1_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS2_START) && defined(CONFIG_SYS_CS2_SIZE) |
| out_be32(&mm->cs2_start, START_REG(CONFIG_SYS_CS2_START)); |
| out_be32(&mm->cs2_stop, STOP_REG(CONFIG_SYS_CS2_START, |
| CONFIG_SYS_CS2_SIZE)); |
| addecr |= (1 << 18); |
| #endif |
| #if defined(CONFIG_SYS_CS2_CFG) |
| out_be32(&lpb->cs2_cfg, CONFIG_SYS_CS2_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS3_START) && defined(CONFIG_SYS_CS3_SIZE) |
| out_be32(&mm->cs3_start, START_REG(CONFIG_SYS_CS3_START)); |
| out_be32(&mm->cs3_stop, STOP_REG(CONFIG_SYS_CS3_START, |
| CONFIG_SYS_CS3_SIZE)); |
| addecr |= (1 << 19); |
| #endif |
| #if defined(CONFIG_SYS_CS3_CFG) |
| out_be32(&lpb->cs3_cfg, CONFIG_SYS_CS3_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS4_START) && defined(CONFIG_SYS_CS4_SIZE) |
| out_be32(&mm->cs4_start, START_REG(CONFIG_SYS_CS4_START)); |
| out_be32(&mm->cs4_stop, STOP_REG(CONFIG_SYS_CS4_START, |
| CONFIG_SYS_CS4_SIZE)); |
| addecr |= (1 << 20); |
| #endif |
| #if defined(CONFIG_SYS_CS4_CFG) |
| out_be32(&lpb->cs4_cfg, CONFIG_SYS_CS4_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS5_START) && defined(CONFIG_SYS_CS5_SIZE) |
| out_be32(&mm->cs5_start, START_REG(CONFIG_SYS_CS5_START)); |
| out_be32(&mm->cs5_stop, STOP_REG(CONFIG_SYS_CS5_START, |
| CONFIG_SYS_CS5_SIZE)); |
| addecr |= (1 << 21); |
| #endif |
| #if defined(CONFIG_SYS_CS5_CFG) |
| out_be32(&lpb->cs5_cfg, CONFIG_SYS_CS5_CFG); |
| #endif |
| |
| #if defined(CONFIG_MPC5200) |
| addecr |= 1; |
| #if defined(CONFIG_SYS_CS6_START) && defined(CONFIG_SYS_CS6_SIZE) |
| out_be32(&mm->cs6_start, START_REG(CONFIG_SYS_CS6_START)); |
| out_be32(&mm->cs6_stop, STOP_REG(CONFIG_SYS_CS6_START, |
| CONFIG_SYS_CS6_SIZE)); |
| addecr |= (1 << 26); |
| #endif |
| #if defined(CONFIG_SYS_CS6_CFG) |
| out_be32(&lpb->cs6_cfg, CONFIG_SYS_CS6_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS7_START) && defined(CONFIG_SYS_CS7_SIZE) |
| out_be32(&mm->cs7_start, START_REG(CONFIG_SYS_CS7_START)); |
| out_be32(&mm->cs7_stop, STOP_REG(CONFIG_SYS_CS7_START, |
| CONFIG_SYS_CS7_SIZE)); |
| addecr |= (1 << 27); |
| #endif |
| #if defined(CONFIG_SYS_CS7_CFG) |
| out_be32(&lpb->cs7_cfg, CONFIG_SYS_CS7_CFG); |
| #endif |
| |
| #if defined(CONFIG_SYS_CS_BURST) |
| out_be32(&lpb->cs_burst, CONFIG_SYS_CS_BURST); |
| #endif |
| #if defined(CONFIG_SYS_CS_DEADCYCLE) |
| out_be32(&lpb->cs_deadcycle, CONFIG_SYS_CS_DEADCYCLE); |
| #endif |
| #endif /* CONFIG_MPC5200 */ |
| |
| /* Enable chip selects */ |
| #if defined(CONFIG_MGT5100) |
| out_be32(&mm->addecr, addecr); |
| #elif defined(CONFIG_MPC5200) |
| out_be32(&mm->ipbi_ws_ctrl, addecr); |
| #endif |
| out_be32(&lpb->cs_ctrl, (1 << 24)); |
| |
| /* Setup pin multiplexing */ |
| #if defined(CONFIG_SYS_GPS_PORT_CONFIG) |
| out_be32(&gpio->port_config, CONFIG_SYS_GPS_PORT_CONFIG); |
| #endif |
| |
| #if defined(CONFIG_MPC5200) |
| /* enable timebase */ |
| setbits_be32(&xlb->config, (1 << 13)); |
| |
| /* Enable snooping for RAM */ |
| setbits_be32(&xlb->config, (1 << 15)); |
| out_be32(&xlb->snoop_window, CONFIG_SYS_SDRAM_BASE | 0x1d); |
| |
| # if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) |
| /* Motorola reports IPB should better run at 133 MHz. */ |
| #if defined(CONFIG_MGT5100) |
| setbits_be32(&mm->addecr, 1); |
| #elif defined(CONFIG_MPC5200) |
| setbits_be32(&mm->ipbi_ws_ctrl, 1); |
| #endif |
| /* pci_clk_sel = 0x02, ipb_clk_sel = 0x00; */ |
| addecr = in_be32(&cdm->cfg); |
| addecr &= ~0x103; |
| # if defined(CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2) |
| /* pci_clk_sel = 0x01 -> IPB_CLK/2 */ |
| addecr |= 0x01; |
| # else |
| /* pci_clk_sel = 0x02 -> XLB_CLK/4 = IPB_CLK/4 */ |
| addecr |= 0x02; |
| # endif /* CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 */ |
| out_be32(&cdm->cfg, addecr); |
| # endif /* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK */ |
| /* Configure the XLB Arbiter */ |
| out_be32(&xlb->master_pri_enable, 0xff); |
| out_be32(&xlb->master_priority, 0x11111111); |
| |
| # if defined(CONFIG_SYS_XLB_PIPELINING) |
| /* Enable piplining */ |
| clrbits_be32(&xlb->config, (1 << 31)); |
| # endif |
| #endif /* CONFIG_MPC5200 */ |
| } |
| |
| /* |
| * initialize higher level parts of CPU like time base and timers |
| */ |
| int cpu_init_r (void) |
| { |
| volatile struct mpc5xxx_intr *intr = |
| (struct mpc5xxx_intr *) MPC5XXX_ICTL; |
| |
| /* mask all interrupts */ |
| #if defined(CONFIG_MGT5100) |
| out_be32(&intr->per_mask, 0xfffffc00); |
| #elif defined(CONFIG_MPC5200) |
| out_be32(&intr->per_mask, 0xffffff00); |
| #endif |
| setbits_be32(&intr->main_mask, 0x0001ffff); |
| clrbits_be32(&intr->ctrl, 0x00000f00); |
| /* route critical ints to normal ints */ |
| setbits_be32(&intr->ctrl, 0x00000001); |
| |
| #if defined(CONFIG_CMD_NET) && defined(CONFIG_MPC5xxx_FEC) |
| /* load FEC microcode */ |
| loadtask(0, 2); |
| #endif |
| |
| return (0); |
| } |