| /* |
| * (C) Copyright 2011 |
| * Heiko Schocher, DENX Software Engineering, hs@denx.de. |
| * |
| * Based on: |
| * (C) Copyright 2009 |
| * Stefano Babic, DENX Software Engineering, sbabic@denx.de. |
| * |
| * (C) Copyright 2008 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include "mkimage.h" |
| #include <image.h> |
| #include "ublimage.h" |
| |
| /* |
| * Supported commands for configuration file |
| */ |
| static table_entry_t ublimage_cmds[] = { |
| {CMD_BOOT_MODE, "MODE", "UBL special modes", }, |
| {CMD_ENTRY, "ENTRY", "Entry point addr for bootloader", }, |
| {CMD_PAGE, "PAGES", |
| "number of pages (size of bootloader)", }, |
| {CMD_ST_BLOCK, "START_BLOCK", |
| "block number where bootloader is present", }, |
| {CMD_ST_PAGE, "START_PAGE", |
| "page number where bootloader is present", }, |
| {CMD_LD_ADDR, "LD_ADDR", |
| "load addr", }, |
| {-1, "", "", }, |
| }; |
| |
| /* |
| * Supported Boot options for configuration file |
| * this is needed to set the correct flash offset |
| */ |
| static table_entry_t ublimage_bootops[] = { |
| {UBL_MAGIC_SAFE, "safe", "Safe boot mode", }, |
| {-1, "", "Invalid", }, |
| }; |
| |
| static struct ubl_header ublimage_header; |
| |
| static uint32_t get_cfg_value(char *token, char *name, int linenr) |
| { |
| char *endptr; |
| uint32_t value; |
| |
| errno = 0; |
| value = strtoul(token, &endptr, 16); |
| if (errno || (token == endptr)) { |
| fprintf(stderr, "Error: %s[%d] - Invalid hex data(%s)\n", |
| name, linenr, token); |
| exit(EXIT_FAILURE); |
| } |
| return value; |
| } |
| |
| static void print_hdr(struct ubl_header *ubl_hdr) |
| { |
| printf("Image Type : Davinci UBL Boot Image\n"); |
| printf("UBL magic : %08x\n", ubl_hdr->magic); |
| printf("Entry Point: %08x\n", ubl_hdr->entry); |
| printf("nr of pages: %08x\n", ubl_hdr->pages); |
| printf("start block: %08x\n", ubl_hdr->block); |
| printf("start page : %08x\n", ubl_hdr->page); |
| } |
| |
| static void parse_cfg_cmd(struct ubl_header *ublhdr, int32_t cmd, char *token, |
| char *name, int lineno, int fld, int dcd_len) |
| { |
| static int cmd_ver_first = ~0; |
| |
| switch (cmd) { |
| case CMD_BOOT_MODE: |
| ublhdr->magic = get_table_entry_id(ublimage_bootops, |
| "ublimage special boot mode", token); |
| if (ublhdr->magic == -1) { |
| fprintf(stderr, "Error: %s[%d] -Invalid boot mode" |
| "(%s)\n", name, lineno, token); |
| exit(EXIT_FAILURE); |
| } |
| ublhdr->magic += UBL_MAGIC_BASE; |
| if (unlikely(cmd_ver_first != 1)) |
| cmd_ver_first = 0; |
| break; |
| case CMD_ENTRY: |
| ublhdr->entry = get_cfg_value(token, name, lineno); |
| break; |
| case CMD_PAGE: |
| ublhdr->pages = get_cfg_value(token, name, lineno); |
| break; |
| case CMD_ST_BLOCK: |
| ublhdr->block = get_cfg_value(token, name, lineno); |
| break; |
| case CMD_ST_PAGE: |
| ublhdr->page = get_cfg_value(token, name, lineno); |
| break; |
| case CMD_LD_ADDR: |
| ublhdr->pll_m = get_cfg_value(token, name, lineno); |
| break; |
| } |
| } |
| |
| static void parse_cfg_fld(struct ubl_header *ublhdr, int32_t *cmd, |
| char *token, char *name, int lineno, int fld, int *dcd_len) |
| { |
| |
| switch (fld) { |
| case CFG_COMMAND: |
| *cmd = get_table_entry_id(ublimage_cmds, |
| "ublimage commands", token); |
| if (*cmd < 0) { |
| fprintf(stderr, "Error: %s[%d] - Invalid command" |
| "(%s)\n", name, lineno, token); |
| exit(EXIT_FAILURE); |
| } |
| break; |
| case CFG_REG_VALUE: |
| parse_cfg_cmd(ublhdr, *cmd, token, name, lineno, fld, *dcd_len); |
| break; |
| default: |
| break; |
| } |
| } |
| static uint32_t parse_cfg_file(struct ubl_header *ublhdr, char *name) |
| { |
| FILE *fd = NULL; |
| char *line = NULL; |
| char *token, *saveptr1, *saveptr2; |
| int lineno = 0; |
| int i; |
| char *ptr = (char *)ublhdr; |
| int fld; |
| size_t len; |
| int dcd_len = 0; |
| int32_t cmd; |
| int ublhdrlen = sizeof(struct ubl_header); |
| |
| fd = fopen(name, "r"); |
| if (fd == 0) { |
| fprintf(stderr, "Error: %s - Can't open DCD file\n", name); |
| exit(EXIT_FAILURE); |
| } |
| |
| /* Fill header with 0xff */ |
| for (i = 0; i < ublhdrlen; i++) { |
| *ptr = 0xff; |
| ptr++; |
| } |
| |
| /* |
| * Very simple parsing, line starting with # are comments |
| * and are dropped |
| */ |
| while ((getline(&line, &len, fd)) > 0) { |
| lineno++; |
| |
| token = strtok_r(line, "\r\n", &saveptr1); |
| if (token == NULL) |
| continue; |
| |
| /* Check inside the single line */ |
| for (fld = CFG_COMMAND, cmd = CMD_INVALID, |
| line = token; ; line = NULL, fld++) { |
| token = strtok_r(line, " \t", &saveptr2); |
| if (token == NULL) |
| break; |
| |
| /* Drop all text starting with '#' as comments */ |
| if (token[0] == '#') |
| break; |
| |
| parse_cfg_fld(ublhdr, &cmd, token, name, |
| lineno, fld, &dcd_len); |
| } |
| } |
| fclose(fd); |
| |
| return dcd_len; |
| } |
| |
| static int ublimage_check_image_types(uint8_t type) |
| { |
| if (type == IH_TYPE_UBLIMAGE) |
| return EXIT_SUCCESS; |
| else |
| return EXIT_FAILURE; |
| } |
| |
| static int ublimage_verify_header(unsigned char *ptr, int image_size, |
| struct mkimage_params *params) |
| { |
| struct ubl_header *ubl_hdr = (struct ubl_header *)ptr; |
| |
| if ((ubl_hdr->magic & 0xFFFFFF00) != UBL_MAGIC_BASE) |
| return -1; |
| |
| return 0; |
| } |
| |
| static void ublimage_print_header(const void *ptr) |
| { |
| struct ubl_header *ubl_hdr = (struct ubl_header *) ptr; |
| |
| print_hdr(ubl_hdr); |
| } |
| |
| static void ublimage_set_header(void *ptr, struct stat *sbuf, int ifd, |
| struct mkimage_params *params) |
| { |
| struct ubl_header *ublhdr = (struct ubl_header *)ptr; |
| |
| /* Parse configuration file */ |
| parse_cfg_file(ublhdr, params->imagename); |
| } |
| |
| int ublimage_check_params(struct mkimage_params *params) |
| { |
| if (!params) |
| return CFG_INVALID; |
| if (!strlen(params->imagename)) { |
| fprintf(stderr, "Error: %s - Configuration file not" |
| "specified, it is needed for ublimage generation\n", |
| params->cmdname); |
| return CFG_INVALID; |
| } |
| /* |
| * Check parameters: |
| * XIP is not allowed and verify that incompatible |
| * parameters are not sent at the same time |
| * For example, if list is required a data image must not be provided |
| */ |
| return (params->dflag && (params->fflag || params->lflag)) || |
| (params->fflag && (params->dflag || params->lflag)) || |
| (params->lflag && (params->dflag || params->fflag)) || |
| (params->xflag) || !(strlen(params->imagename)); |
| } |
| |
| /* |
| * ublimage parameters |
| */ |
| static struct image_type_params ublimage_params = { |
| .name = "Davinci UBL boot support", |
| .header_size = sizeof(struct ubl_header), |
| .hdr = (void *)&ublimage_header, |
| .check_image_type = ublimage_check_image_types, |
| .verify_header = ublimage_verify_header, |
| .print_header = ublimage_print_header, |
| .set_header = ublimage_set_header, |
| .check_params = ublimage_check_params, |
| }; |
| |
| void init_ubl_image_type(void) |
| { |
| mkimage_register(&ublimage_params); |
| } |