| /* |
| * Copyright (C) 2011 Andes Technology Corporation |
| * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> |
| * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| #include <asm/arch/ag101.h> |
| |
| /* |
| * CPU and Board Configuration Options |
| */ |
| #define CONFIG_ADP_AG101 |
| |
| #define CONFIG_USE_INTERRUPT |
| |
| #define CONFIG_SKIP_LOWLEVEL_INIT |
| |
| /* |
| * Definitions related to passing arguments to kernel. |
| */ |
| #define CONFIG_CMDLINE_TAG /* send commandline to Kernel */ |
| #define CONFIG_SETUP_MEMORY_TAGS /* send memory definition to kernel */ |
| #define CONFIG_INITRD_TAG /* send initrd params */ |
| |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT |
| #define CONFIG_MEM_REMAP |
| #endif |
| |
| #ifdef CONFIG_SKIP_LOWLEVEL_INIT |
| #define CONFIG_SYS_TEXT_BASE 0x03200000 |
| #else |
| #define CONFIG_SYS_TEXT_BASE 0x00000000 |
| #endif |
| |
| /* |
| * Timer |
| */ |
| |
| /* |
| * According to the discussion in u-boot mailing list before, |
| * CONFIG_SYS_HZ at 1000 is mandatory. |
| */ |
| #define CONFIG_SYS_HZ 1000 |
| #define CONFIG_SYS_CLK_FREQ 48000000 |
| #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ |
| |
| /* |
| * Use Externel CLOCK or PCLK |
| */ |
| #undef CONFIG_FTRTC010_EXTCLK |
| |
| #ifndef CONFIG_FTRTC010_EXTCLK |
| #define CONFIG_FTRTC010_PCLK |
| #endif |
| |
| #ifdef CONFIG_FTRTC010_EXTCLK |
| #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ |
| #else |
| #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ |
| #endif |
| |
| #define TIMER_LOAD_VAL 0xffffffff |
| |
| /* |
| * Real Time Clock |
| */ |
| #define CONFIG_RTC_FTRTC010 |
| |
| /* |
| * Real Time Clock Divider |
| * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) |
| */ |
| #define OSC_5MHZ (5*1000000) |
| #define OSC_CLK (2*OSC_5MHZ) |
| #define RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) |
| |
| /* |
| * Serial console configuration |
| */ |
| |
| /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ |
| #define CONFIG_BAUDRATE 38400 |
| #define CONFIG_CONS_INDEX 1 |
| #define CONFIG_SYS_NS16550 |
| #define CONFIG_SYS_NS16550_SERIAL |
| #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE |
| #define CONFIG_SYS_NS16550_REG_SIZE -4 |
| #define CONFIG_SYS_NS16550_CLK ((46080000 * 20) / 25) /* AG101 */ |
| |
| /* |
| * Ethernet |
| */ |
| #define CONFIG_FTMAC100 |
| |
| #define CONFIG_BOOTDELAY 3 |
| |
| /* |
| * SD (MMC) controller |
| */ |
| #define CONFIG_MMC |
| #define CONFIG_CMD_MMC |
| #define CONFIG_GENERIC_MMC |
| #define CONFIG_DOS_PARTITION |
| #define CONFIG_FTSDC010 |
| #define CONFIG_FTSDC010_NUMBER 1 |
| #define CONFIG_FTSDC010_SDIO |
| #define CONFIG_CMD_FAT |
| #define CONFIG_CMD_EXT2 |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_CACHE |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_PING |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CONFIG_SYS_LONGHELP /* undef to save memory */ |
| #define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */ |
| #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ |
| |
| /* Print Buffer Size */ |
| #define CONFIG_SYS_PBSIZE \ |
| (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) |
| |
| /* max number of command args */ |
| #define CONFIG_SYS_MAXARGS 16 |
| |
| /* Boot Argument Buffer Size */ |
| #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE |
| |
| /* |
| * Size of malloc() pool |
| */ |
| /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ |
| #define CONFIG_SYS_MALLOC_LEN (512 << 10) |
| |
| /* |
| * size in bytes reserved for initial data |
| */ |
| #define CONFIG_SYS_GBL_DATA_SIZE 128 |
| |
| /* |
| * AHB Controller configuration |
| */ |
| #define CONFIG_FTAHBC020S |
| |
| #ifdef CONFIG_FTAHBC020S |
| #include <faraday/ftahbc020s.h> |
| |
| /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ |
| #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 |
| |
| /* |
| * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, |
| * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote |
| * in C language. |
| */ |
| #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ |
| (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ |
| FTAHBC020S_SLAVE_BSR_SIZE(0xb)) |
| #endif |
| |
| /* |
| * Watchdog |
| */ |
| #define CONFIG_FTWDT010_WATCHDOG |
| |
| /* |
| * PMU Power controller configuration |
| */ |
| #define CONFIG_PMU |
| #define CONFIG_FTPMU010_POWER |
| |
| #ifdef CONFIG_FTPMU010_POWER |
| #include <faraday/ftpmu010.h> |
| #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E |
| #define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ |
| FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ |
| FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ |
| FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ |
| FTPMU010_SDRAMHTC_CKE_DCSR | \ |
| FTPMU010_SDRAMHTC_DQM_DCSR | \ |
| FTPMU010_SDRAMHTC_SDCLK_DCSR) |
| #endif |
| |
| /* |
| * SDRAM controller configuration |
| */ |
| #define CONFIG_FTSDMC021 |
| |
| #ifdef CONFIG_FTSDMC021 |
| #include <faraday/ftsdmc021.h> |
| |
| #define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRP(1) | \ |
| FTSDMC021_TP1_TRCD(1) | \ |
| FTSDMC021_TP1_TRF(3) | \ |
| FTSDMC021_TP1_TWR(1) | \ |
| FTSDMC021_TP1_TCL(2)) |
| |
| #define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ |
| FTSDMC021_TP2_INI_REFT(8) | \ |
| FTSDMC021_TP2_REF_INTV(0x180)) |
| |
| /* |
| * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, |
| * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in |
| * C language. |
| */ |
| #define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ |
| FTSDMC021_CR1_DSZ(3) | \ |
| FTSDMC021_CR1_MBW(2) | \ |
| FTSDMC021_CR1_BNKSIZE(6)) |
| |
| #define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ |
| FTSDMC021_CR2_IREF | \ |
| FTSDMC021_CR2_ISMR) |
| |
| #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE |
| #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ |
| CONFIG_SYS_FTSDMC021_BANK0_BASE) |
| |
| #define CONFIG_SYS_FTSDMC021_BANK1_BASE \ |
| (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) |
| #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ |
| CONFIG_SYS_FTSDMC021_BANK1_BASE) |
| |
| #endif |
| |
| /* |
| * Physical Memory Map |
| */ |
| #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT) |
| #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ |
| #if defined(CONFIG_MEM_REMAP) |
| #define PHYS_SDRAM_0_AT_INIT 0x10000000 /* SDRAM Bank #1 before remap*/ |
| #endif |
| #else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */ |
| #define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */ |
| #endif |
| #define PHYS_SDRAM_1 \ |
| (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ |
| |
| #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ |
| #define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */ |
| #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ |
| |
| #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 |
| |
| #ifdef CONFIG_MEM_REMAP |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ |
| GENERATED_GBL_DATA_SIZE) |
| #else |
| #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ |
| GENERATED_GBL_DATA_SIZE) |
| #endif /* CONFIG_MEM_REMAP */ |
| |
| /* |
| * Load address and memory test area should agree with |
| * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. |
| */ |
| #define CONFIG_SYS_LOAD_ADDR 0x300000 |
| |
| /* memtest works on 63 MB in DRAM */ |
| #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 |
| #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) |
| |
| /* |
| * Static memory controller configuration |
| */ |
| #define CONFIG_FTSMC020 |
| |
| #ifdef CONFIG_FTSMC020 |
| #include <faraday/ftsmc020.h> |
| |
| #ifdef CONFIG_SKIP_LOWLEVEL_INIT |
| #define CONFIG_SYS_FTSMC020_CONFIGS { \ |
| { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ |
| { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ |
| } |
| #else |
| #define CONFIG_SYS_FTSMC020_CONFIGS { \ |
| { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ |
| } |
| #endif |
| |
| /* |
| * There are 2 bank connected to FTSMC020 on ADP-AG101. |
| * You can use jumper and switch to force it booted from ROM or FLASH. |
| * MA17: Lo, SW5 = "0101": BANK0: ROM, BANK1: FLASH. |
| * MA17: Hi, SW5 = "1010": BANK0: FLASH; ROM is disabled. |
| */ |
| #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ |
| #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ |
| FTSMC020_BANK_SIZE_32M | \ |
| FTSMC020_BANK_MBW_32) |
| |
| #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ |
| FTSMC020_TPR_AST(1) | \ |
| FTSMC020_TPR_CTW(1) | \ |
| FTSMC020_TPR_ATI(1) | \ |
| FTSMC020_TPR_AT2(1) | \ |
| FTSMC020_TPR_WTC(1) | \ |
| FTSMC020_TPR_AHT(1) | \ |
| FTSMC020_TPR_TRNA(1)) |
| #endif |
| |
| /* |
| * This FTSMC020_BANK0_CONFIG indecates the setting of BANK0. |
| * 1. When CONFIG_SKIP_LOWLEVEL_INIT is enabled, BANK0 is EEPROM, |
| * Do NOT enable BANK0 in FTSMC020_BANK0_CONFIG under this condition. |
| * 2. When CONFIG_SKIP_LOWLEVEL_INIT is undefined, BANK0 is FLASH. |
| */ |
| #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_SIZE_32M | \ |
| FTSMC020_BANK_MBW_32) |
| |
| #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_RBE | \ |
| FTSMC020_TPR_AST(3) | \ |
| FTSMC020_TPR_CTW(3) | \ |
| FTSMC020_TPR_ATI(0xf) | \ |
| FTSMC020_TPR_AT2(3) | \ |
| FTSMC020_TPR_WTC(3) | \ |
| FTSMC020_TPR_AHT(3) | \ |
| FTSMC020_TPR_TRNA(0xf)) |
| |
| #define FTSMC020_BANK1_CONFIG (FTSMC020_BANK_ENABLE | \ |
| FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ |
| FTSMC020_BANK_SIZE_32M | \ |
| FTSMC020_BANK_MBW_32) |
| |
| #define FTSMC020_BANK1_TIMING (FTSMC020_TPR_RBE | \ |
| FTSMC020_TPR_AST(1) | \ |
| FTSMC020_TPR_CTW(1) | \ |
| FTSMC020_TPR_ATI(1) | \ |
| FTSMC020_TPR_AT2(1) | \ |
| FTSMC020_TPR_WTC(1) | \ |
| FTSMC020_TPR_AHT(1) | \ |
| FTSMC020_TPR_TRNA(1)) |
| #endif /* CONFIG_FTSMC020 */ |
| |
| /* |
| * FLASH and environment organization |
| */ |
| /* use CFI framework */ |
| #define CONFIG_SYS_FLASH_CFI |
| #define CONFIG_FLASH_CFI_DRIVER |
| |
| #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT |
| #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE |
| |
| /* support JEDEC */ |
| |
| /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ |
| #ifdef CONFIG_SKIP_LOWLEVEL_INIT |
| #define PHYS_FLASH_1 0x80400000 /* BANK 1 */ |
| #else /* !CONFIG_SKIP_LOWLEVEL_INIT */ |
| #ifdef CONFIG_MEM_REMAP |
| #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ |
| #else |
| #define PHYS_FLASH_1 0x00000000 /* BANK 0 */ |
| #endif /* CONFIG_MEM_REMAP */ |
| #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ |
| |
| #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 |
| #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } |
| #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 |
| |
| #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ |
| #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ |
| |
| /* max number of memory banks */ |
| /* |
| * There are 4 banks supported for this Controller, |
| * but we have only 1 bank connected to flash on board |
| */ |
| #define CONFIG_SYS_MAX_FLASH_BANKS 1 |
| |
| /* max number of sectors on one chip */ |
| #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2*2) |
| #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE |
| #define CONFIG_SYS_MAX_FLASH_SECT 128 |
| |
| /* environments */ |
| #define CONFIG_ENV_IS_IN_FLASH |
| #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000) |
| #define CONFIG_ENV_SIZE 8192 |
| #define CONFIG_ENV_OVERWRITE |
| |
| #endif /* __CONFIG_H */ |