| /* |
| * U-boot - traps.c Routines related to interrupts and exceptions |
| * |
| * Copyright (c) 2005-2008 Analog Devices Inc. |
| * |
| * This file is based on |
| * No original Copyright holder listed, |
| * Probabily original (C) Roman Zippel (assigned DJD, 1999) |
| * |
| * Copyright 2003 Metrowerks - for Blackfin |
| * Copyright 2000-2001 Lineo, Inc. D. Jeff Dionne <jeff@lineo.ca> |
| * Copyright 1999-2000 D. Jeff Dionne, <jeff@uclinux.org> |
| * |
| * (C) Copyright 2000-2004 |
| * Wolfgang Denk, DENX Software Engineering, wd@denx.de. |
| * |
| * Licensed under the GPL-2 or later. |
| */ |
| |
| #include <common.h> |
| #include <kgdb.h> |
| #include <linux/types.h> |
| #include <asm/traps.h> |
| #include <asm/cplb.h> |
| #include <asm/io.h> |
| #include <asm/mach-common/bits/core.h> |
| #include <asm/mach-common/bits/mpu.h> |
| #include <asm/mach-common/bits/trace.h> |
| #include <asm/deferred.h> |
| #include "cpu.h" |
| |
| #ifdef CONFIG_DEBUG_DUMP |
| # define ENABLE_DUMP 1 |
| #else |
| # define ENABLE_DUMP 0 |
| #endif |
| |
| #define trace_buffer_save(x) \ |
| do { \ |
| if (!ENABLE_DUMP) \ |
| break; \ |
| (x) = bfin_read_TBUFCTL(); \ |
| bfin_write_TBUFCTL((x) & ~TBUFEN); \ |
| } while (0) |
| |
| #define trace_buffer_restore(x) \ |
| do { \ |
| if (!ENABLE_DUMP) \ |
| break; \ |
| bfin_write_TBUFCTL((x)); \ |
| } while (0); |
| |
| /* The purpose of this map is to provide a mapping of address<->cplb settings |
| * rather than an exact map of what is actually addressable on the part. This |
| * map covers all current Blackfin parts. If you try to access an address that |
| * is in this map but not actually on the part, you won't get an exception and |
| * reboot, you'll get an external hardware addressing error and reboot. Since |
| * only the ends matter (you did something wrong and the board reset), the means |
| * are largely irrelevant. |
| */ |
| struct memory_map { |
| uint32_t start, end; |
| uint32_t data_flags, inst_flags; |
| }; |
| const struct memory_map const bfin_memory_map[] = { |
| { /* external memory */ |
| .start = 0x00000000, |
| .end = 0x20000000, |
| .data_flags = SDRAM_DGENERIC, |
| .inst_flags = SDRAM_IGENERIC, |
| }, |
| { /* async banks */ |
| .start = 0x20000000, |
| .end = 0x30000000, |
| .data_flags = SDRAM_EBIU, |
| .inst_flags = SDRAM_INON_CHBL, |
| }, |
| { /* everything on chip */ |
| .start = 0xE0000000, |
| .end = 0xFFFFFFFF, |
| .data_flags = L1_DMEMORY, |
| .inst_flags = L1_IMEMORY, |
| } |
| }; |
| |
| #ifdef CONFIG_EXCEPTION_DEFER |
| unsigned int deferred_regs[deferred_regs_last]; |
| #endif |
| |
| /* |
| * Handle all exceptions while running in EVT3 or EVT5 |
| */ |
| int trap_c(struct pt_regs *regs, uint32_t level) |
| { |
| uint32_t ret = 0; |
| uint32_t trapnr = (regs->seqstat & EXCAUSE); |
| unsigned long tflags; |
| bool data = false; |
| |
| /* |
| * Keep the trace buffer so that a miss here points people |
| * to the right place (their code). Crashes here rarely |
| * happen. If they do, only the Blackfin maintainer cares. |
| */ |
| trace_buffer_save(tflags); |
| |
| switch (trapnr) { |
| /* 0x26 - Data CPLB Miss */ |
| case VEC_CPLB_M: |
| |
| if (ANOMALY_05000261) { |
| static uint32_t last_cplb_fault_retx; |
| /* |
| * Work around an anomaly: if we see a new DCPLB fault, |
| * return without doing anything. Then, |
| * if we get the same fault again, handle it. |
| */ |
| if (last_cplb_fault_retx != regs->retx) { |
| last_cplb_fault_retx = regs->retx; |
| break; |
| } |
| } |
| |
| data = true; |
| /* fall through */ |
| |
| /* 0x27 - Instruction CPLB Miss */ |
| case VEC_CPLB_I_M: { |
| volatile uint32_t *CPLB_ADDR_BASE, *CPLB_DATA_BASE, *CPLB_ADDR, *CPLB_DATA; |
| uint32_t new_cplb_addr = 0, new_cplb_data = 0; |
| static size_t last_evicted; |
| size_t i; |
| |
| #ifdef CONFIG_EXCEPTION_DEFER |
| /* This should never happen */ |
| if (level == 5) |
| bfin_panic(regs); |
| #endif |
| |
| new_cplb_addr = (data ? bfin_read_DCPLB_FAULT_ADDR() : bfin_read_ICPLB_FAULT_ADDR()) & ~(4 * 1024 * 1024 - 1); |
| |
| for (i = 0; i < ARRAY_SIZE(bfin_memory_map); ++i) { |
| /* if the exception is inside this range, lets use it */ |
| if (new_cplb_addr >= bfin_memory_map[i].start && |
| new_cplb_addr < bfin_memory_map[i].end) |
| break; |
| } |
| if (i == ARRAY_SIZE(bfin_memory_map)) { |
| printf("%cCPLB exception outside of memory map at 0x%p\n", |
| (data ? 'D' : 'I'), (void *)new_cplb_addr); |
| bfin_panic(regs); |
| } else |
| debug("CPLB addr %p matches map 0x%p - 0x%p\n", |
| (void *)new_cplb_addr, |
| (void *)bfin_memory_map[i].start, |
| (void *)bfin_memory_map[i].end); |
| new_cplb_data = (data ? bfin_memory_map[i].data_flags : bfin_memory_map[i].inst_flags); |
| |
| if (data) { |
| CPLB_ADDR_BASE = (uint32_t *)DCPLB_ADDR0; |
| CPLB_DATA_BASE = (uint32_t *)DCPLB_DATA0; |
| } else { |
| CPLB_ADDR_BASE = (uint32_t *)ICPLB_ADDR0; |
| CPLB_DATA_BASE = (uint32_t *)ICPLB_DATA0; |
| } |
| |
| /* find the next unlocked entry and evict it */ |
| i = last_evicted & 0xF; |
| debug("last evicted = %zu\n", i); |
| CPLB_DATA = CPLB_DATA_BASE + i; |
| while (*CPLB_DATA & CPLB_LOCK) { |
| debug("skipping %zu %p - %08X\n", i, CPLB_DATA, *CPLB_DATA); |
| i = (i + 1) & 0xF; /* wrap around */ |
| CPLB_DATA = CPLB_DATA_BASE + i; |
| } |
| CPLB_ADDR = CPLB_ADDR_BASE + i; |
| |
| debug("evicting entry %zu: 0x%p 0x%08X\n", i, |
| (void *)*CPLB_ADDR, *CPLB_DATA); |
| last_evicted = i + 1; |
| |
| /* need to turn off cplbs whenever we muck with the cplb table */ |
| #if ENDCPLB != ENICPLB |
| # error cplb enable bit violates my sanity |
| #endif |
| uint32_t mem_control = (data ? DMEM_CONTROL : IMEM_CONTROL); |
| bfin_write32(mem_control, bfin_read32(mem_control) & ~ENDCPLB); |
| *CPLB_ADDR = new_cplb_addr; |
| *CPLB_DATA = new_cplb_data; |
| bfin_write32(mem_control, bfin_read32(mem_control) | ENDCPLB); |
| SSYNC(); |
| |
| /* dump current table for debugging purposes */ |
| CPLB_ADDR = CPLB_ADDR_BASE; |
| CPLB_DATA = CPLB_DATA_BASE; |
| for (i = 0; i < 16; ++i) |
| debug("%2zu 0x%p 0x%08X\n", i, |
| (void *)*CPLB_ADDR++, *CPLB_DATA++); |
| |
| break; |
| } |
| #ifdef CONFIG_CMD_KGDB |
| /* Single step |
| * if we are in IRQ5, just ignore, otherwise defer, and handle it in kgdb |
| */ |
| case VEC_STEP: |
| if (level == 3) { |
| /* If we just returned from an interrupt, the single step |
| * event is for the RTI instruction. |
| */ |
| if (regs->retx == regs->pc) |
| break; |
| /* we just return if we are single stepping through IRQ5 */ |
| if (regs->ipend & 0x20) |
| break; |
| /* Otherwise, turn single stepping off & fall through, |
| * which defers to IRQ5 |
| */ |
| regs->syscfg &= ~1; |
| } |
| /* fall through */ |
| #endif |
| default: |
| #ifdef CONFIG_CMD_KGDB |
| if (level == 3) { |
| /* We need to handle this at EVT5, so try again */ |
| bfin_dump(regs); |
| ret = 1; |
| break; |
| } |
| if (debugger_exception_handler && (*debugger_exception_handler)(regs)) |
| break; |
| #endif |
| bfin_panic(regs); |
| } |
| |
| trace_buffer_restore(tflags); |
| |
| return ret; |
| } |
| |
| #ifndef CONFIG_KALLSYMS |
| const char *symbol_lookup(unsigned long addr, unsigned long *caddr) |
| { |
| *caddr = addr; |
| return "N/A"; |
| } |
| #endif |
| |
| static void decode_address(char *buf, unsigned long address) |
| { |
| unsigned long sym_addr; |
| void *paddr = (void *)address; |
| const char *sym = symbol_lookup(address, &sym_addr); |
| |
| if (sym) { |
| sprintf(buf, "<0x%p> { %s + 0x%lx }", paddr, sym, address - sym_addr); |
| return; |
| } |
| |
| if (!address) |
| sprintf(buf, "<0x%p> /* Maybe null pointer? */", paddr); |
| else if (address >= CONFIG_SYS_MONITOR_BASE && |
| address < CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) |
| sprintf(buf, "<0x%p> /* somewhere in u-boot */", paddr); |
| else |
| sprintf(buf, "<0x%p> /* unknown address */", paddr); |
| } |
| |
| static char *strhwerrcause(uint16_t hwerrcause) |
| { |
| switch (hwerrcause) { |
| case 0x02: return "system mmr error"; |
| case 0x03: return "external memory addressing error"; |
| case 0x12: return "performance monitor overflow"; |
| case 0x18: return "raise 5 instruction"; |
| default: return "undef"; |
| } |
| } |
| |
| static char *strexcause(uint16_t excause) |
| { |
| switch (excause) { |
| case 0x00 ... 0xf: return "custom exception"; |
| case 0x10: return "single step"; |
| case 0x11: return "trace buffer full"; |
| case 0x21: return "undef inst"; |
| case 0x22: return "illegal inst"; |
| case 0x23: return "dcplb prot violation"; |
| case 0x24: return "misaligned data"; |
| case 0x25: return "unrecoverable event"; |
| case 0x26: return "dcplb miss"; |
| case 0x27: return "multiple dcplb hit"; |
| case 0x28: return "emulation watchpoint"; |
| case 0x2a: return "misaligned inst"; |
| case 0x2b: return "icplb prot violation"; |
| case 0x2c: return "icplb miss"; |
| case 0x2d: return "multiple icplb hit"; |
| case 0x2e: return "illegal use of supervisor resource"; |
| default: return "undef"; |
| } |
| } |
| |
| void dump(struct pt_regs *fp) |
| { |
| char buf[150]; |
| int i; |
| uint16_t hwerrcause, excause; |
| |
| if (!ENABLE_DUMP) |
| return; |
| |
| #ifndef CONFIG_CMD_KGDB |
| /* fp->ipend is normally garbage, so load it ourself */ |
| fp->ipend = bfin_read_IPEND(); |
| #endif |
| |
| hwerrcause = (fp->seqstat & HWERRCAUSE) >> HWERRCAUSE_P; |
| excause = (fp->seqstat & EXCAUSE) >> EXCAUSE_P; |
| |
| printf("SEQUENCER STATUS:\n"); |
| printf(" SEQSTAT: %08lx IPEND: %04lx SYSCFG: %04lx\n", |
| fp->seqstat, fp->ipend, fp->syscfg); |
| printf(" HWERRCAUSE: 0x%x: %s\n", hwerrcause, strhwerrcause(hwerrcause)); |
| printf(" EXCAUSE : 0x%x: %s\n", excause, strexcause(excause)); |
| for (i = 6; i <= 15; ++i) { |
| if (fp->ipend & (1 << i)) { |
| decode_address(buf, bfin_read32(EVT0 + 4*i)); |
| printf(" physical IVG%i asserted : %s\n", i, buf); |
| } |
| } |
| decode_address(buf, fp->rete); |
| printf(" RETE: %s\n", buf); |
| decode_address(buf, fp->retn); |
| printf(" RETN: %s\n", buf); |
| decode_address(buf, fp->retx); |
| printf(" RETX: %s\n", buf); |
| decode_address(buf, fp->rets); |
| printf(" RETS: %s\n", buf); |
| /* we lie and store RETI in "pc" */ |
| decode_address(buf, fp->pc); |
| printf(" RETI: %s\n", buf); |
| |
| if (fp->seqstat & EXCAUSE) { |
| decode_address(buf, bfin_read_DCPLB_FAULT_ADDR()); |
| printf("DCPLB_FAULT_ADDR: %s\n", buf); |
| decode_address(buf, bfin_read_ICPLB_FAULT_ADDR()); |
| printf("ICPLB_FAULT_ADDR: %s\n", buf); |
| } |
| |
| printf("\nPROCESSOR STATE:\n"); |
| printf(" R0 : %08lx R1 : %08lx R2 : %08lx R3 : %08lx\n", |
| fp->r0, fp->r1, fp->r2, fp->r3); |
| printf(" R4 : %08lx R5 : %08lx R6 : %08lx R7 : %08lx\n", |
| fp->r4, fp->r5, fp->r6, fp->r7); |
| printf(" P0 : %08lx P1 : %08lx P2 : %08lx P3 : %08lx\n", |
| fp->p0, fp->p1, fp->p2, fp->p3); |
| printf(" P4 : %08lx P5 : %08lx FP : %08lx SP : %08lx\n", |
| fp->p4, fp->p5, fp->fp, (unsigned long)fp); |
| printf(" LB0: %08lx LT0: %08lx LC0: %08lx\n", |
| fp->lb0, fp->lt0, fp->lc0); |
| printf(" LB1: %08lx LT1: %08lx LC1: %08lx\n", |
| fp->lb1, fp->lt1, fp->lc1); |
| printf(" B0 : %08lx L0 : %08lx M0 : %08lx I0 : %08lx\n", |
| fp->b0, fp->l0, fp->m0, fp->i0); |
| printf(" B1 : %08lx L1 : %08lx M1 : %08lx I1 : %08lx\n", |
| fp->b1, fp->l1, fp->m1, fp->i1); |
| printf(" B2 : %08lx L2 : %08lx M2 : %08lx I2 : %08lx\n", |
| fp->b2, fp->l2, fp->m2, fp->i2); |
| printf(" B3 : %08lx L3 : %08lx M3 : %08lx I3 : %08lx\n", |
| fp->b3, fp->l3, fp->m3, fp->i3); |
| printf("A0.w: %08lx A0.x: %08lx A1.w: %08lx A1.x: %08lx\n", |
| fp->a0w, fp->a0x, fp->a1w, fp->a1x); |
| |
| printf("USP : %08lx ASTAT: %08lx\n", |
| fp->usp, fp->astat); |
| |
| printf("\n"); |
| } |
| |
| static void _dump_bfin_trace_buffer(void) |
| { |
| char buf[150]; |
| int i = 0; |
| |
| if (!ENABLE_DUMP) |
| return; |
| |
| printf("Hardware Trace:\n"); |
| |
| if (bfin_read_TBUFSTAT() & TBUFCNT) { |
| for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { |
| decode_address(buf, bfin_read_TBUF()); |
| printf("%4i Target : %s\n", i, buf); |
| decode_address(buf, bfin_read_TBUF()); |
| printf(" Source : %s\n", buf); |
| } |
| } |
| } |
| |
| void dump_bfin_trace_buffer(void) |
| { |
| unsigned long tflags; |
| trace_buffer_save(tflags); |
| _dump_bfin_trace_buffer(); |
| trace_buffer_restore(tflags); |
| } |
| |
| void bfin_dump(struct pt_regs *regs) |
| { |
| unsigned long tflags; |
| |
| trace_buffer_save(tflags); |
| |
| puts( |
| "\n" |
| "\n" |
| "\n" |
| "Ack! Something bad happened to the Blackfin!\n" |
| "\n" |
| ); |
| dump(regs); |
| _dump_bfin_trace_buffer(); |
| puts("\n"); |
| |
| trace_buffer_restore(tflags); |
| } |
| |
| void bfin_panic(struct pt_regs *regs) |
| { |
| unsigned long tflags; |
| trace_buffer_save(tflags); |
| bfin_dump(regs); |
| panic("PANIC: Blackfin internal error"); |
| } |