blob: 16ae952f37ccc711b80072c25f1ad68c2a31d79a [file] [log] [blame]
/*
* Copyright 2016 Toradex AG
*
* Configuration settings for the Colibri iMX7 module.
*
* based on mx7dsabresd.h:
* Copyright (C) 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#ifndef __COLIBRI_IMX7_CONFIG_H
#define __COLIBRI_IMX7_CONFIG_H
#include "mx7_common.h"
#define CONFIG_SYS_THUMB_BUILD
#define CONFIG_USE_ARCH_MEMCPY
#define CONFIG_USE_ARCH_MEMSET
/*#define CONFIG_DBG_MONITOR*/
#define PHYS_SDRAM_SIZE SZ_512M
#define CONFIG_BOARD_EARLY_INIT_F
#define CONFIG_BOARD_LATE_INIT
#define CONFIG_DISPLAY_BOARDINFO_LATE
/* Size of malloc() pool */
#define CONFIG_SYS_MALLOC_LEN (32 * SZ_1M)
/* Uncomment to enable secure boot support */
/* #define CONFIG_SECURE_BOOT */
#define CONFIG_CSF_SIZE 0x4000
#define CONFIG_CMD_BMODE
/* Network */
#define CONFIG_FEC_MXC
#define CONFIG_MII
#define CONFIG_FEC_XCV_TYPE RMII
#define CONFIG_ETHPRIME "FEC"
#define CONFIG_FEC_MXC_PHYADDR 0
#define CONFIG_PHYLIB
#define CONFIG_PHY_MICREL
#define CONFIG_IP_DEFRAG
#define CONFIG_TFTP_BLOCKSIZE 16352
#define CONFIG_TFTP_TSIZE
/* ENET1 */
#define IMX_FEC_BASE ENET_IPS_BASE_ADDR
/* MMC Config*/
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
#define CONFIG_SYS_FSL_USDHC_NUM 1
#undef CONFIG_BOOTM_PLAN9
#undef CONFIG_BOOTM_RTEMS
/* I2C configs */
#define CONFIG_SYS_I2C
#define CONFIG_SYS_I2C_MXC
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
#define CONFIG_SYS_I2C_SPEED 100000
#define CONFIG_IPADDR 192.168.10.2
#define CONFIG_NETMASK 255.255.255.0
#define CONFIG_SERVERIP 192.168.10.1
#define MEM_LAYOUT_ENV_SETTINGS \
"fdt_addr_r=0x82000000\0" \
"fdt_high=0xffffffff\0" \
"initrd_high=0xffffffff\0" \
"kernel_addr_r=0x81000000\0" \
"ramdisk_addr_r=0x82100000\0"
#define SD_BOOTCMD \
"sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \
"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} " \
"${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \
"run m4boot && " \
"load mmc 0:1 ${kernel_addr_r} ${kernel_file} && " \
"load mmc 0:1 ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define NFS_BOOTCMD \
"nfsargs=ip=:::::eth0: root=/dev/nfs\0" \
"nfsboot=run setup; " \
"setenv bootargs ${defargs} ${nfsargs} " \
"${setupargs} ${vidargs}; echo Booting from NFS...;" \
"dhcp ${kernel_addr_r} && " \
"tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define UBI_BOOTCMD \
"ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \
"ubi.fm_autoconvert=1\0" \
"ubiboot=run setup; " \
"setenv bootargs ${defargs} ${ubiargs} " \
"${setupargs} ${vidargs}; echo Booting from NAND...; " \
"ubi part ubi && run m4boot && " \
"ubi read ${kernel_addr_r} kernel && " \
"ubi read ${fdt_addr_r} dtb && " \
"run fdt_fixup && bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \
#define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot"
#define CONFIG_EXTRA_ENV_SETTINGS \
MEM_LAYOUT_ENV_SETTINGS \
NFS_BOOTCMD \
SD_BOOTCMD \
UBI_BOOTCMD \
"console=ttymxc0\0" \
"defargs=\0" \
"fdt_board=eval-v3\0" \
"fdt_fixup=;\0" \
"m4boot=;\0" \
"ip_dyn=yes\0" \
"kernel_file=zImage\0" \
"mtdparts=" MTDPARTS_DEFAULT "\0" \
"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
"00:14:2d:00:00:00; fi; tftpboot ${loadaddr} " \
"${board}/flash_eth.img && source ${loadaddr}\0" \
"setsdupdate=mmc rescan && setenv interface mmc && " \
"fatload ${interface} 0:1 ${loadaddr} " \
"${board}/flash_blk.img && source ${loadaddr}\0" \
"setup=setenv setupargs " \
"console=tty1 console=${console}" \
",${baudrate}n8 ${memargs} consoleblank=0 ${mtdparts}\0" \
"setupdate=run setsdupdate || run setusbupdate || run setethupdate\0" \
"setusbupdate=usb start && setenv interface usb && " \
"fatload ${interface} 0:1 ${loadaddr} " \
"${board}/flash_blk.img && source ${loadaddr}\0" \
"splashpos=m,m\0" \
"videomode=video=ctfb:x:640,y:480,depth:18,pclk:39722,le:48,ri:16,up:33,lo:10,hs:96,vs:2,sync:0,vmode:0\0" \
/* Miscellaneous configurable options */
#define CONFIG_SYS_LONGHELP
#define CONFIG_SYS_MEMTEST_START 0x80000000
#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x0c000000)
#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
#define CONFIG_SYS_HZ 1000
#define CONFIG_STACKSIZE SZ_128K
/* Physical Memory Map */
#define CONFIG_NR_DRAM_BANKS 1
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
#define CONFIG_SYS_INIT_SP_OFFSET \
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_ADDR \
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
/* FLASH and environment organization */
#define CONFIG_SYS_NO_FLASH
#define CONFIG_ENV_IS_IN_NAND
#if defined(CONFIG_ENV_IS_IN_MMC)
#define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC1 */
#define CONFIG_SYS_MMC_ENV_PART 0 /* user area */
#define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC1 */
#define CONFIG_ENV_OFFSET (8 * SZ_64K)
#elif defined(CONFIG_ENV_IS_IN_NAND)
#define CONFIG_ENV_OFFSET (4 * 1024 * 1024)
#define CONFIG_ENV_SECT_SIZE (128 * 1024)
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE
#endif
#define CONFIG_NAND_MXS
#define CONFIG_CMD_NAND_TRIMFFS
/* NAND stuff */
#define CONFIG_SYS_MAX_NAND_DEVICE 1
#define CONFIG_SYS_NAND_BASE 0x40000000
#define CONFIG_SYS_NAND_5_ADDR_CYCLE
#define CONFIG_SYS_NAND_ONFI_DETECTION
#define CONFIG_SYS_NAND_MX7_GPMI_62_ECC_BYTES
#define CONFIG_CMD_NAND_TORTURE
/* UBI stuff */
#define CONFIG_RBTREE
#define CONFIG_LZO
#define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */
/* Dynamic MTD partition support */
#define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */
#define CONFIG_MTD_PARTITIONS
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
#define MTDIDS_DEFAULT "nand0=gpmi-nand"
#define MTDPARTS_DEFAULT "mtdparts=gpmi-nand:" \
"512k(mx7-bcb)," \
"3584k(u-boot)ro," \
"512k(u-boot-env)," \
"-(ubi)"
/* DMA stuff, needed for GPMI/MXS NAND support */
#define CONFIG_APBH_DMA
#define CONFIG_APBH_DMA_BURST
#define CONFIG_APBH_DMA_BURST8
/* USB Configs */
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
#define CONFIG_MXC_USB_FLAGS 0
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
#define CONFIG_IMX_THERMAL
#define CONFIG_USBD_HS
#define CONFIG_USB_FUNCTION_MASS_STORAGE
/* USB Device Firmware Update support */
#define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M
#define DFU_DEFAULT_POLL_TIMEOUT 300
#define CONFIG_VIDEO
#ifdef CONFIG_VIDEO
#define CONFIG_CFB_CONSOLE
#define CONFIG_VIDEO_MXS
#define CONFIG_VIDEO_LOGO
#define CONFIG_VIDEO_SW_CURSOR
#define CONFIG_VGA_AS_SINGLE_DEVICE
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
#define CONFIG_SPLASH_SCREEN
#define CONFIG_SPLASH_SCREEN_ALIGN
#define CONFIG_CMD_BMP
#define CONFIG_BMP_16BPP
#define CONFIG_VIDEO_BMP_RLE8
#define CONFIG_VIDEO_BMP_LOGO
#endif
#endif