| /* |
| * Copyright (C) 2005-2008 Atmel Corporation |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| #include <asm-offsets.h> |
| #include <config.h> |
| #include <asm/ptrace.h> |
| #include <asm/sysreg.h> |
| |
| #define SYSREG_MMUCR_I_OFFSET 2 |
| #define SYSREG_MMUCR_S_OFFSET 4 |
| |
| #define SR_INIT (SYSREG_BIT(GM) | SYSREG_BIT(EM) | SYSREG_BIT(M0)) |
| /* due to errata (unreliable branch folding) clear FE bit explicitly */ |
| #define CPUCR_INIT ((SYSREG_BIT(BI) | SYSREG_BIT(BE) \ |
| | SYSREG_BIT(RE) | SYSREG_BIT(IBE) \ |
| | SYSREG_BIT(IEE)) & ~SYSREG_BIT(FE)) |
| |
| /* |
| * To save some space, we use the same entry point for |
| * exceptions and reset. This avoids lots of alignment padding |
| * since the reset vector is always suitably aligned. |
| */ |
| .section .exception.text, "ax", @progbits |
| .global _start |
| .global _evba |
| .type _start, @function |
| .type _evba, @function |
| _start: |
| .size _start, 0 |
| _evba: |
| .org 0x00 |
| rjmp unknown_exception /* Unrecoverable exception */ |
| .org 0x04 |
| rjmp unknown_exception /* TLB multiple hit */ |
| .org 0x08 |
| rjmp unknown_exception /* Bus error data fetch */ |
| .org 0x0c |
| rjmp unknown_exception /* Bus error instruction fetch */ |
| .org 0x10 |
| rjmp unknown_exception /* NMI */ |
| .org 0x14 |
| rjmp unknown_exception /* Instruction address */ |
| .org 0x18 |
| rjmp unknown_exception /* ITLB protection */ |
| .org 0x1c |
| rjmp unknown_exception /* Breakpoint */ |
| .org 0x20 |
| rjmp unknown_exception /* Illegal opcode */ |
| .org 0x24 |
| rjmp unknown_exception /* Unimplemented instruction */ |
| .org 0x28 |
| rjmp unknown_exception /* Privilege violation */ |
| .org 0x2c |
| rjmp unknown_exception /* Floating-point */ |
| .org 0x30 |
| rjmp unknown_exception /* Coprocessor absent */ |
| .org 0x34 |
| rjmp unknown_exception /* Data Address (read) */ |
| .org 0x38 |
| rjmp unknown_exception /* Data Address (write) */ |
| .org 0x3c |
| rjmp unknown_exception /* DTLB Protection (read) */ |
| .org 0x40 |
| rjmp unknown_exception /* DTLB Protection (write) */ |
| .org 0x44 |
| rjmp unknown_exception /* DTLB Modified */ |
| |
| .org 0x50 /* ITLB Miss */ |
| pushm r8-r12,lr |
| rjmp 1f |
| .org 0x60 /* DTLB Miss (read) */ |
| pushm r8-r12,lr |
| rjmp 1f |
| .org 0x70 /* DTLB Miss (write) */ |
| pushm r8-r12,lr |
| 1: mov r12, sp |
| rcall mmu_handle_tlb_miss |
| popm r8-r12,lr |
| brne unknown_exception |
| rete |
| |
| .size _evba, . - _evba |
| |
| .align 2 |
| .type unknown_exception, @function |
| unknown_exception: |
| /* Figure out whether we're handling an exception (Exception |
| * mode) or just booting (Supervisor mode). */ |
| csrfcz SYSREG_M1_OFFSET |
| brcc at32ap_cpu_bootstrap |
| |
| /* This is an exception. Complain. */ |
| pushm r0-r12 |
| sub r8, sp, REG_R12 - REG_R0 - 4 |
| mov r9, lr |
| mfsr r10, SYSREG_RAR_EX |
| mfsr r11, SYSREG_RSR_EX |
| pushm r8-r11 |
| mfsr r12, SYSREG_ECR |
| mov r11, sp |
| rcall do_unknown_exception |
| 1: rjmp 1b |
| |
| /* The COUNT/COMPARE timer interrupt handler */ |
| .global timer_interrupt_handler |
| .type timer_interrupt_handler,@function |
| .align 2 |
| timer_interrupt_handler: |
| /* |
| * Increment timer_overflow and re-write COMPARE with 0xffffffff. |
| * |
| * We're running at interrupt level 3, so we don't need to save |
| * r8-r12 or lr to the stack. |
| */ |
| lda.w r8, timer_overflow |
| ld.w r9, r8[0] |
| mov r10, -1 |
| mtsr SYSREG_COMPARE, r10 |
| sub r9, -1 |
| st.w r8[0], r9 |
| rete |
| |
| /* |
| * CPU bootstrap after reset is handled here. SoC code may |
| * override this in case they need to initialize oscillators, |
| * etc. |
| */ |
| .section .text.at32ap_cpu_bootstrap, "ax", @progbits |
| .global at32ap_cpu_bootstrap |
| .weak at32ap_cpu_bootstrap |
| .type at32ap_cpu_bootstrap, @function |
| .align 2 |
| at32ap_cpu_bootstrap: |
| /* Reset the Status Register */ |
| mov r0, lo(SR_INIT) |
| orh r0, hi(SR_INIT) |
| mtsr SYSREG_SR, r0 |
| |
| /* Reset CPUCR and invalidate the BTB */ |
| mov r2, CPUCR_INIT |
| mtsr SYSREG_CPUCR, r2 |
| |
| /* Flush the caches */ |
| mov r1, 0 |
| cache r1[4], 8 |
| cache r1[0], 0 |
| sync 0 |
| |
| /* Reset the MMU to default settings */ |
| mov r0, SYSREG_BIT(MMUCR_S) | SYSREG_BIT(MMUCR_I) |
| mtsr SYSREG_MMUCR, r0 |
| |
| /* Internal RAM should not need any initialization. We might |
| have to initialize external RAM here if the part doesn't |
| have internal RAM (or we may use the data cache) */ |
| |
| /* Jump to cacheable segment */ |
| lddpc pc, 1f |
| |
| .align 2 |
| 1: .long at32ap_low_level_init |
| .size _start, . - _start |
| |
| /* Common CPU bootstrap code after oscillator/cache/etc. init */ |
| .section .text.avr32ap_low_level_init, "ax", @progbits |
| .global at32ap_low_level_init |
| .type at32ap_low_level_init, @function |
| .align 2 |
| at32ap_low_level_init: |
| lddpc sp, sp_init |
| |
| /* Initialize the GOT pointer */ |
| lddpc r6, got_init |
| 3: rsub r6, pc |
| |
| /* Let's go */ |
| rjmp board_init_f |
| |
| .align 2 |
| .type sp_init,@object |
| sp_init: |
| .long CONFIG_SYS_INIT_SP_ADDR |
| got_init: |
| .long 3b - _GLOBAL_OFFSET_TABLE_ |
| |
| /* |
| * void relocate_code(new_sp, new_gd, monitor_addr) |
| * |
| * Relocate the u-boot image into RAM and continue from there. |
| * Does not return. |
| */ |
| .section .text.relocate_code,"ax",@progbits |
| .global relocate_code |
| .type relocate_code,@function |
| relocate_code: |
| mov sp, r12 /* use new stack */ |
| mov r12, r11 /* save new_gd */ |
| mov r11, r10 /* save destination address */ |
| |
| /* copy .text section and flush the cache along the way */ |
| lda.w r8, _text |
| lda.w r9, _etext |
| sub lr, r10, r8 /* relocation offset */ |
| |
| 1: ldm r8++, r0-r3 |
| stm r10, r0-r3 |
| sub r10, -16 |
| ldm r8++, r0-r3 |
| stm r10, r0-r3 |
| sub r10, -16 |
| cp.w r8, r9 |
| cache r10[-4], 0x0d /* dcache clean/invalidate */ |
| cache r10[-4], 0x01 /* icache invalidate */ |
| brlt 1b |
| |
| /* flush write buffer */ |
| sync 0 |
| |
| /* copy data sections */ |
| lda.w r9, _edata |
| 1: ld.d r0, r8++ |
| st.d r10++, r0 |
| cp.w r8, r9 |
| brlt 1b |
| |
| /* zero out .bss */ |
| mov r0, 0 |
| mov r1, 0 |
| lda.w r9, __bss_end |
| sub r9, r8 |
| 1: st.d r10++, r0 |
| sub r9, 8 |
| brgt 1b |
| |
| /* jump to RAM */ |
| sub r0, pc, . - in_ram |
| add pc, r0, lr |
| |
| .align 2 |
| in_ram: |
| /* find the new GOT and relocate it */ |
| lddpc r6, got_init_reloc |
| 3: rsub r6, pc |
| mov r8, r6 |
| lda.w r9, _egot |
| lda.w r10, _got |
| sub r9, r10 |
| 1: ld.w r0, r8[0] |
| add r0, lr |
| st.w r8++, r0 |
| sub r9, 4 |
| brgt 1b |
| |
| /* Move the exception handlers */ |
| mfsr r2, SYSREG_EVBA |
| add r2, lr |
| mtsr SYSREG_EVBA, r2 |
| |
| /* Do the rest of the initialization sequence */ |
| call board_init_r |
| |
| .align 2 |
| got_init_reloc: |
| .long 3b - _GLOBAL_OFFSET_TABLE_ |
| |
| .size relocate_code, . - relocate_code |