| /* |
| * Copyright (C) 2008,2010 Freescale Semiconductor, Inc. |
| * Dave Liu <daveliu@freescale.com> |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <asm/io.h> |
| #include <asm/processor.h> |
| #include <asm/fsl_serdes.h> |
| #include <malloc.h> |
| #include <libata.h> |
| #include <fis.h> |
| #include "fsl_sata.h" |
| |
| extern block_dev_desc_t sata_dev_desc[CONFIG_SYS_SATA_MAX_DEVICE]; |
| |
| #ifndef CONFIG_SYS_SATA1_FLAGS |
| #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA |
| #endif |
| #ifndef CONFIG_SYS_SATA2_FLAGS |
| #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA |
| #endif |
| |
| static struct fsl_sata_info fsl_sata_info[] = { |
| #ifdef CONFIG_SATA1 |
| {CONFIG_SYS_SATA1, CONFIG_SYS_SATA1_FLAGS}, |
| #else |
| {0, 0}, |
| #endif |
| #ifdef CONFIG_SATA2 |
| {CONFIG_SYS_SATA2, CONFIG_SYS_SATA2_FLAGS}, |
| #else |
| {0, 0}, |
| #endif |
| }; |
| |
| static inline void sdelay(unsigned long sec) |
| { |
| unsigned long i; |
| for (i = 0; i < sec; i++) |
| mdelay(1000); |
| } |
| |
| void dprint_buffer(unsigned char *buf, int len) |
| { |
| int i, j; |
| |
| i = 0; |
| j = 0; |
| printf("\n\r"); |
| |
| for (i = 0; i < len; i++) { |
| printf("%02x ", *buf++); |
| j++; |
| if (j == 16) { |
| printf("\n\r"); |
| j = 0; |
| } |
| } |
| printf("\n\r"); |
| } |
| |
| static void fsl_sata_dump_sfis(struct sata_fis_d2h *s) |
| { |
| printf("Status FIS dump:\n\r"); |
| printf("fis_type: %02x\n\r", s->fis_type); |
| printf("pm_port_i: %02x\n\r", s->pm_port_i); |
| printf("status: %02x\n\r", s->status); |
| printf("error: %02x\n\r", s->error); |
| printf("lba_low: %02x\n\r", s->lba_low); |
| printf("lba_mid: %02x\n\r", s->lba_mid); |
| printf("lba_high: %02x\n\r", s->lba_high); |
| printf("device: %02x\n\r", s->device); |
| printf("lba_low_exp: %02x\n\r", s->lba_low_exp); |
| printf("lba_mid_exp: %02x\n\r", s->lba_mid_exp); |
| printf("lba_high_exp: %02x\n\r", s->lba_high_exp); |
| printf("res1: %02x\n\r", s->res1); |
| printf("sector_count: %02x\n\r", s->sector_count); |
| printf("sector_count_exp: %02x\n\r", s->sector_count_exp); |
| } |
| |
| static int ata_wait_register(volatile unsigned *addr, u32 mask, |
| u32 val, u32 timeout_msec) |
| { |
| int i; |
| u32 temp; |
| |
| for (i = 0; (((temp = in_le32(addr)) & mask) != val) |
| && i < timeout_msec; i++) |
| mdelay(1); |
| return (i < timeout_msec) ? 0 : -1; |
| } |
| |
| int init_sata(int dev) |
| { |
| u32 length, align; |
| cmd_hdr_tbl_t *cmd_hdr; |
| u32 cda; |
| u32 val32; |
| fsl_sata_reg_t *reg; |
| u32 sig; |
| int i; |
| fsl_sata_t *sata; |
| |
| if (dev < 0 || dev > (CONFIG_SYS_SATA_MAX_DEVICE - 1)) { |
| printf("the sata index %d is out of ranges\n\r", dev); |
| return -1; |
| } |
| |
| #ifdef CONFIG_MPC85xx |
| if ((dev == 0) && (!is_serdes_configured(SATA1))) { |
| printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev); |
| return -1; |
| } |
| if ((dev == 1) && (!is_serdes_configured(SATA2))) { |
| printf("SATA%d [dev = %d] is not enabled\n", dev+1, dev); |
| return -1; |
| } |
| #endif |
| |
| /* Allocate SATA device driver struct */ |
| sata = (fsl_sata_t *)malloc(sizeof(fsl_sata_t)); |
| if (!sata) { |
| printf("alloc the sata device struct failed\n\r"); |
| return -1; |
| } |
| /* Zero all of the device driver struct */ |
| memset((void *)sata, 0, sizeof(fsl_sata_t)); |
| |
| /* Save the private struct to block device struct */ |
| sata_dev_desc[dev].priv = (void *)sata; |
| |
| sprintf(sata->name, "SATA%d", dev); |
| |
| /* Set the controller register base address to device struct */ |
| reg = (fsl_sata_reg_t *)(fsl_sata_info[dev].sata_reg_base); |
| sata->reg_base = reg; |
| |
| /* Allocate the command header table, 4 bytes aligned */ |
| length = sizeof(struct cmd_hdr_tbl); |
| align = SATA_HC_CMD_HDR_TBL_ALIGN; |
| sata->cmd_hdr_tbl_offset = (void *)malloc(length + align); |
| if (!sata) { |
| printf("alloc the command header failed\n\r"); |
| return -1; |
| } |
| |
| cmd_hdr = (cmd_hdr_tbl_t *)(((u32)sata->cmd_hdr_tbl_offset + align) |
| & ~(align - 1)); |
| sata->cmd_hdr = cmd_hdr; |
| |
| /* Zero all of the command header table */ |
| memset((void *)sata->cmd_hdr_tbl_offset, 0, length + align); |
| |
| /* Allocate command descriptor for all command */ |
| length = sizeof(struct cmd_desc) * SATA_HC_MAX_CMD; |
| align = SATA_HC_CMD_DESC_ALIGN; |
| sata->cmd_desc_offset = (void *)malloc(length + align); |
| if (!sata->cmd_desc_offset) { |
| printf("alloc the command descriptor failed\n\r"); |
| return -1; |
| } |
| sata->cmd_desc = (cmd_desc_t *)(((u32)sata->cmd_desc_offset + align) |
| & ~(align - 1)); |
| /* Zero all of command descriptor */ |
| memset((void *)sata->cmd_desc_offset, 0, length + align); |
| |
| /* Link the command descriptor to command header */ |
| for (i = 0; i < SATA_HC_MAX_CMD; i++) { |
| cda = ((u32)sata->cmd_desc + SATA_HC_CMD_DESC_SIZE * i) |
| & ~(CMD_HDR_CDA_ALIGN - 1); |
| cmd_hdr->cmd_slot[i].cda = cpu_to_le32(cda); |
| } |
| |
| /* To have safe state, force the controller offline */ |
| val32 = in_le32(®->hcontrol); |
| val32 &= ~HCONTROL_ONOFF; |
| val32 |= HCONTROL_FORCE_OFFLINE; |
| out_le32(®->hcontrol, val32); |
| |
| /* Wait the controller offline */ |
| ata_wait_register(®->hstatus, HSTATUS_ONOFF, 0, 1000); |
| |
| /* Set the command header base address to CHBA register to tell DMA */ |
| out_le32(®->chba, (u32)cmd_hdr & ~0x3); |
| |
| /* Snoop for the command header */ |
| val32 = in_le32(®->hcontrol); |
| val32 |= HCONTROL_HDR_SNOOP; |
| out_le32(®->hcontrol, val32); |
| |
| /* Disable all of interrupts */ |
| val32 = in_le32(®->hcontrol); |
| val32 &= ~HCONTROL_INT_EN_ALL; |
| out_le32(®->hcontrol, val32); |
| |
| /* Clear all of interrupts */ |
| val32 = in_le32(®->hstatus); |
| out_le32(®->hstatus, val32); |
| |
| /* Set the ICC, no interrupt coalescing */ |
| out_le32(®->icc, 0x01000000); |
| |
| /* No PM attatched, the SATA device direct connect */ |
| out_le32(®->cqpmp, 0); |
| |
| /* Clear SError register */ |
| val32 = in_le32(®->serror); |
| out_le32(®->serror, val32); |
| |
| /* Clear CER register */ |
| val32 = in_le32(®->cer); |
| out_le32(®->cer, val32); |
| |
| /* Clear DER register */ |
| val32 = in_le32(®->der); |
| out_le32(®->der, val32); |
| |
| /* No device detection or initialization action requested */ |
| out_le32(®->scontrol, 0x00000300); |
| |
| /* Configure the transport layer, default value */ |
| out_le32(®->transcfg, 0x08000016); |
| |
| /* Configure the link layer, default value */ |
| out_le32(®->linkcfg, 0x0000ff34); |
| |
| /* Bring the controller online */ |
| val32 = in_le32(®->hcontrol); |
| val32 |= HCONTROL_ONOFF; |
| out_le32(®->hcontrol, val32); |
| |
| mdelay(100); |
| |
| /* print sata device name */ |
| if (!dev) |
| printf("%s ", sata->name); |
| else |
| printf(" %s ", sata->name); |
| |
| /* Wait PHY RDY signal changed for 500ms */ |
| ata_wait_register(®->hstatus, HSTATUS_PHY_RDY, |
| HSTATUS_PHY_RDY, 500); |
| |
| /* Check PHYRDY */ |
| val32 = in_le32(®->hstatus); |
| if (val32 & HSTATUS_PHY_RDY) { |
| sata->link = 1; |
| } else { |
| sata->link = 0; |
| printf("(No RDY)\n\r"); |
| return -1; |
| } |
| |
| /* Wait for signature updated, which is 1st D2H */ |
| ata_wait_register(®->hstatus, HSTATUS_SIGNATURE, |
| HSTATUS_SIGNATURE, 10000); |
| |
| if (val32 & HSTATUS_SIGNATURE) { |
| sig = in_le32(®->sig); |
| debug("Signature updated, the sig =%08x\n\r", sig); |
| sata->ata_device_type = ata_dev_classify(sig); |
| } |
| |
| /* Check the speed */ |
| val32 = in_le32(®->sstatus); |
| if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN1) |
| printf("(1.5 Gbps)\n\r"); |
| else if ((val32 & SSTATUS_SPD_MASK) == SSTATUS_SPD_GEN2) |
| printf("(3 Gbps)\n\r"); |
| |
| return 0; |
| } |
| |
| /* Hardware reset, like Power-on and COMRESET */ |
| void fsl_sata_hardware_reset(u32 reg_base) |
| { |
| fsl_sata_reg_t *reg = (fsl_sata_reg_t *)reg_base; |
| u32 scontrol; |
| |
| /* Disable the SATA interface and put PHY offline */ |
| scontrol = in_le32(®->scontrol); |
| scontrol = (scontrol & 0x0f0) | 0x304; |
| out_le32(®->scontrol, scontrol); |
| |
| /* No speed strict */ |
| scontrol = in_le32(®->scontrol); |
| scontrol = scontrol & ~0x0f0; |
| out_le32(®->scontrol, scontrol); |
| |
| /* Issue PHY wake/reset, Hardware_reset_asserted */ |
| scontrol = in_le32(®->scontrol); |
| scontrol = (scontrol & 0x0f0) | 0x301; |
| out_le32(®->scontrol, scontrol); |
| |
| mdelay(100); |
| |
| /* Resume PHY, COMRESET negated, the device initialize hardware |
| * and execute diagnostics, send good status-signature to host, |
| * which is D2H register FIS, and then the device enter idle state. |
| */ |
| scontrol = in_le32(®->scontrol); |
| scontrol = (scontrol & 0x0f0) | 0x300; |
| out_le32(®->scontrol, scontrol); |
| |
| mdelay(100); |
| return; |
| } |
| |
| static void fsl_sata_dump_regs(fsl_sata_reg_t *reg) |
| { |
| printf("\n\rSATA: %08x\n\r", (u32)reg); |
| printf("CQR: %08x\n\r", in_le32(®->cqr)); |
| printf("CAR: %08x\n\r", in_le32(®->car)); |
| printf("CCR: %08x\n\r", in_le32(®->ccr)); |
| printf("CER: %08x\n\r", in_le32(®->cer)); |
| printf("CQR: %08x\n\r", in_le32(®->cqr)); |
| printf("DER: %08x\n\r", in_le32(®->der)); |
| printf("CHBA: %08x\n\r", in_le32(®->chba)); |
| printf("HStatus: %08x\n\r", in_le32(®->hstatus)); |
| printf("HControl: %08x\n\r", in_le32(®->hcontrol)); |
| printf("CQPMP: %08x\n\r", in_le32(®->cqpmp)); |
| printf("SIG: %08x\n\r", in_le32(®->sig)); |
| printf("ICC: %08x\n\r", in_le32(®->icc)); |
| printf("SStatus: %08x\n\r", in_le32(®->sstatus)); |
| printf("SError: %08x\n\r", in_le32(®->serror)); |
| printf("SControl: %08x\n\r", in_le32(®->scontrol)); |
| printf("SNotification: %08x\n\r", in_le32(®->snotification)); |
| printf("TransCfg: %08x\n\r", in_le32(®->transcfg)); |
| printf("TransStatus: %08x\n\r", in_le32(®->transstatus)); |
| printf("LinkCfg: %08x\n\r", in_le32(®->linkcfg)); |
| printf("LinkCfg1: %08x\n\r", in_le32(®->linkcfg1)); |
| printf("LinkCfg2: %08x\n\r", in_le32(®->linkcfg2)); |
| printf("LinkStatus: %08x\n\r", in_le32(®->linkstatus)); |
| printf("LinkStatus1: %08x\n\r", in_le32(®->linkstatus1)); |
| printf("PhyCtrlCfg: %08x\n\r", in_le32(®->phyctrlcfg)); |
| printf("SYSPR: %08x\n\r", in_be32(®->syspr)); |
| } |
| |
| static int fsl_ata_exec_ata_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis, |
| int is_ncq, int tag, u8 *buffer, u32 len) |
| { |
| cmd_hdr_entry_t *cmd_hdr; |
| cmd_desc_t *cmd_desc; |
| sata_fis_h2d_t *h2d; |
| prd_entry_t *prde; |
| u32 ext_c_ddc; |
| u32 prde_count; |
| u32 val32; |
| u32 ttl; |
| fsl_sata_reg_t *reg = sata->reg_base; |
| int i; |
| |
| /* Check xfer length */ |
| if (len > SATA_HC_MAX_XFER_LEN) { |
| printf("max transfer length is 64MB\n\r"); |
| return 0; |
| } |
| |
| /* Setup the command descriptor */ |
| cmd_desc = sata->cmd_desc + tag; |
| |
| /* Get the pointer cfis of command descriptor */ |
| h2d = (sata_fis_h2d_t *)cmd_desc->cfis; |
| |
| /* Zero the cfis of command descriptor */ |
| memset((void *)h2d, 0, SATA_HC_CMD_DESC_CFIS_SIZE); |
| |
| /* Copy the cfis from user to command descriptor */ |
| h2d->fis_type = cfis->fis_type; |
| h2d->pm_port_c = cfis->pm_port_c; |
| h2d->command = cfis->command; |
| |
| h2d->features = cfis->features; |
| h2d->features_exp = cfis->features_exp; |
| |
| h2d->lba_low = cfis->lba_low; |
| h2d->lba_mid = cfis->lba_mid; |
| h2d->lba_high = cfis->lba_high; |
| h2d->lba_low_exp = cfis->lba_low_exp; |
| h2d->lba_mid_exp = cfis->lba_mid_exp; |
| h2d->lba_high_exp = cfis->lba_high_exp; |
| |
| if (!is_ncq) { |
| h2d->sector_count = cfis->sector_count; |
| h2d->sector_count_exp = cfis->sector_count_exp; |
| } else { /* NCQ */ |
| h2d->sector_count = (u8)(tag << 3); |
| } |
| |
| h2d->device = cfis->device; |
| h2d->control = cfis->control; |
| |
| /* Setup the PRD table */ |
| prde = (prd_entry_t *)cmd_desc->prdt; |
| memset((void *)prde, 0, sizeof(struct prdt)); |
| |
| prde_count = 0; |
| ttl = len; |
| for (i = 0; i < SATA_HC_MAX_PRD_DIRECT; i++) { |
| if (!len) |
| break; |
| prde->dba = cpu_to_le32((u32)buffer & ~0x3); |
| debug("dba = %08x\n\r", (u32)buffer); |
| |
| if (len < PRD_ENTRY_MAX_XFER_SZ) { |
| ext_c_ddc = PRD_ENTRY_DATA_SNOOP | len; |
| debug("ext_c_ddc1 = %08x, len = %08x\n\r", ext_c_ddc, len); |
| prde->ext_c_ddc = cpu_to_le32(ext_c_ddc); |
| prde_count++; |
| prde++; |
| break; |
| } else { |
| ext_c_ddc = PRD_ENTRY_DATA_SNOOP; /* 4M bytes */ |
| debug("ext_c_ddc2 = %08x, len = %08x\n\r", ext_c_ddc, len); |
| prde->ext_c_ddc = cpu_to_le32(ext_c_ddc); |
| buffer += PRD_ENTRY_MAX_XFER_SZ; |
| len -= PRD_ENTRY_MAX_XFER_SZ; |
| prde_count++; |
| prde++; |
| } |
| } |
| |
| /* Setup the command slot of cmd hdr */ |
| cmd_hdr = (cmd_hdr_entry_t *)&sata->cmd_hdr->cmd_slot[tag]; |
| |
| cmd_hdr->cda = cpu_to_le32((u32)cmd_desc & ~0x3); |
| |
| val32 = prde_count << CMD_HDR_PRD_ENTRY_SHIFT; |
| val32 |= sizeof(sata_fis_h2d_t); |
| cmd_hdr->prde_fis_len = cpu_to_le32(val32); |
| |
| cmd_hdr->ttl = cpu_to_le32(ttl); |
| |
| if (!is_ncq) { |
| val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP; |
| } else { |
| val32 = CMD_HDR_ATTR_RES | CMD_HDR_ATTR_SNOOP | CMD_HDR_ATTR_FPDMA; |
| } |
| |
| tag &= CMD_HDR_ATTR_TAG; |
| val32 |= tag; |
| |
| debug("attribute = %08x\n\r", val32); |
| cmd_hdr->attribute = cpu_to_le32(val32); |
| |
| /* Make sure cmd desc and cmd slot valid before commmand issue */ |
| sync(); |
| |
| /* PMP*/ |
| val32 = (u32)(h2d->pm_port_c & 0x0f); |
| out_le32(®->cqpmp, val32); |
| |
| /* Wait no active */ |
| if (ata_wait_register(®->car, (1 << tag), 0, 10000)) |
| printf("Wait no active time out\n\r"); |
| |
| /* Issue command */ |
| if (!(in_le32(®->cqr) & (1 << tag))) { |
| val32 = 1 << tag; |
| out_le32(®->cqr, val32); |
| } |
| |
| /* Wait command completed for 10s */ |
| if (ata_wait_register(®->ccr, (1 << tag), (1 << tag), 10000)) { |
| if (!is_ncq) |
| printf("Non-NCQ command time out\n\r"); |
| else |
| printf("NCQ command time out\n\r"); |
| } |
| |
| val32 = in_le32(®->cer); |
| |
| if (val32) { |
| u32 der; |
| fsl_sata_dump_sfis((struct sata_fis_d2h *)cmd_desc->sfis); |
| printf("CE at device\n\r"); |
| fsl_sata_dump_regs(reg); |
| der = in_le32(®->der); |
| out_le32(®->cer, val32); |
| out_le32(®->der, der); |
| } |
| |
| /* Clear complete flags */ |
| val32 = in_le32(®->ccr); |
| out_le32(®->ccr, val32); |
| |
| return len; |
| } |
| |
| static int fsl_ata_exec_reset_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis, |
| int tag, u8 *buffer, u32 len) |
| { |
| return 0; |
| } |
| |
| static int fsl_sata_exec_cmd(struct fsl_sata *sata, struct sata_fis_h2d *cfis, |
| enum cmd_type command_type, int tag, u8 *buffer, u32 len) |
| { |
| int rc; |
| |
| if (tag > SATA_HC_MAX_CMD || tag < 0) { |
| printf("tag is out of range, tag=%d\n\r", tag); |
| return -1; |
| } |
| |
| switch (command_type) { |
| case CMD_ATA: |
| rc = fsl_ata_exec_ata_cmd(sata, cfis, 0, tag, buffer, len); |
| return rc; |
| case CMD_RESET: |
| rc = fsl_ata_exec_reset_cmd(sata, cfis, tag, buffer, len); |
| return rc; |
| case CMD_NCQ: |
| rc = fsl_ata_exec_ata_cmd(sata, cfis, 1, tag, buffer, len); |
| return rc; |
| case CMD_ATAPI: |
| case CMD_VENDOR_BIST: |
| case CMD_BIST: |
| printf("not support now\n\r"); |
| return -1; |
| default: |
| break; |
| } |
| |
| return -1; |
| } |
| |
| static void fsl_sata_identify(int dev, u16 *id) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| struct sata_fis_h2d h2d, *cfis = &h2d; |
| |
| memset(cfis, 0, sizeof(struct sata_fis_h2d)); |
| |
| cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| cfis->pm_port_c = 0x80; /* is command */ |
| cfis->command = ATA_CMD_ID_ATA; |
| |
| fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, (u8 *)id, ATA_ID_WORDS * 2); |
| ata_swap_buf_le16(id, ATA_ID_WORDS); |
| } |
| |
| static void fsl_sata_xfer_mode(int dev, u16 *id) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| |
| sata->pio = id[ATA_ID_PIO_MODES]; |
| sata->mwdma = id[ATA_ID_MWDMA_MODES]; |
| sata->udma = id[ATA_ID_UDMA_MODES]; |
| debug("pio %04x, mwdma %04x, udma %04x\n\r", sata->pio, sata->mwdma, sata->udma); |
| } |
| |
| static void fsl_sata_set_features(int dev) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| struct sata_fis_h2d h2d, *cfis = &h2d; |
| u8 udma_cap; |
| |
| memset(cfis, 0, sizeof(struct sata_fis_h2d)); |
| |
| cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| cfis->pm_port_c = 0x80; /* is command */ |
| cfis->command = ATA_CMD_SET_FEATURES; |
| cfis->features = SETFEATURES_XFER; |
| |
| /* First check the device capablity */ |
| udma_cap = (u8)(sata->udma & 0xff); |
| debug("udma_cap %02x\n\r", udma_cap); |
| |
| if (udma_cap == ATA_UDMA6) |
| cfis->sector_count = XFER_UDMA_6; |
| if (udma_cap == ATA_UDMA5) |
| cfis->sector_count = XFER_UDMA_5; |
| if (udma_cap == ATA_UDMA4) |
| cfis->sector_count = XFER_UDMA_4; |
| if (udma_cap == ATA_UDMA3) |
| cfis->sector_count = XFER_UDMA_3; |
| |
| fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); |
| } |
| |
| static u32 fsl_sata_rw_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| struct sata_fis_h2d h2d, *cfis = &h2d; |
| u32 block; |
| |
| block = start; |
| |
| memset(cfis, 0, sizeof(struct sata_fis_h2d)); |
| |
| cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| cfis->pm_port_c = 0x80; /* is command */ |
| cfis->command = (is_write) ? ATA_CMD_WRITE : ATA_CMD_READ; |
| cfis->device = ATA_LBA; |
| |
| cfis->device |= (block >> 24) & 0xf; |
| cfis->lba_high = (block >> 16) & 0xff; |
| cfis->lba_mid = (block >> 8) & 0xff; |
| cfis->lba_low = block & 0xff; |
| cfis->sector_count = (u8)(blkcnt & 0xff); |
| |
| fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt); |
| return blkcnt; |
| } |
| |
| void fsl_sata_flush_cache(int dev) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| struct sata_fis_h2d h2d, *cfis = &h2d; |
| |
| memset(cfis, 0, sizeof(struct sata_fis_h2d)); |
| |
| cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| cfis->pm_port_c = 0x80; /* is command */ |
| cfis->command = ATA_CMD_FLUSH; |
| |
| fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); |
| } |
| |
| static u32 fsl_sata_rw_cmd_ext(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| struct sata_fis_h2d h2d, *cfis = &h2d; |
| u64 block; |
| |
| block = (u64)start; |
| |
| memset(cfis, 0, sizeof(struct sata_fis_h2d)); |
| |
| cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| cfis->pm_port_c = 0x80; /* is command */ |
| |
| cfis->command = (is_write) ? ATA_CMD_WRITE_EXT |
| : ATA_CMD_READ_EXT; |
| |
| cfis->lba_high_exp = (block >> 40) & 0xff; |
| cfis->lba_mid_exp = (block >> 32) & 0xff; |
| cfis->lba_low_exp = (block >> 24) & 0xff; |
| cfis->lba_high = (block >> 16) & 0xff; |
| cfis->lba_mid = (block >> 8) & 0xff; |
| cfis->lba_low = block & 0xff; |
| cfis->device = ATA_LBA; |
| cfis->sector_count_exp = (blkcnt >> 8) & 0xff; |
| cfis->sector_count = blkcnt & 0xff; |
| |
| fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, buffer, ATA_SECT_SIZE * blkcnt); |
| return blkcnt; |
| } |
| |
| u32 fsl_sata_rw_ncq_cmd(int dev, u32 start, u32 blkcnt, u8 *buffer, int is_write) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| struct sata_fis_h2d h2d, *cfis = &h2d; |
| int ncq_channel; |
| u64 block; |
| |
| if (sata->lba48 != 1) { |
| printf("execute FPDMA command on non-LBA48 hard disk\n\r"); |
| return -1; |
| } |
| |
| block = (u64)start; |
| |
| memset(cfis, 0, sizeof(struct sata_fis_h2d)); |
| |
| cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| cfis->pm_port_c = 0x80; /* is command */ |
| |
| cfis->command = (is_write) ? ATA_CMD_FPDMA_WRITE |
| : ATA_CMD_FPDMA_READ; |
| |
| cfis->lba_high_exp = (block >> 40) & 0xff; |
| cfis->lba_mid_exp = (block >> 32) & 0xff; |
| cfis->lba_low_exp = (block >> 24) & 0xff; |
| cfis->lba_high = (block >> 16) & 0xff; |
| cfis->lba_mid = (block >> 8) & 0xff; |
| cfis->lba_low = block & 0xff; |
| |
| cfis->device = ATA_LBA; |
| cfis->features_exp = (blkcnt >> 8) & 0xff; |
| cfis->features = blkcnt & 0xff; |
| |
| if (sata->queue_depth >= SATA_HC_MAX_CMD) |
| ncq_channel = SATA_HC_MAX_CMD - 1; |
| else |
| ncq_channel = sata->queue_depth - 1; |
| |
| /* Use the latest queue */ |
| fsl_sata_exec_cmd(sata, cfis, CMD_NCQ, ncq_channel, buffer, ATA_SECT_SIZE * blkcnt); |
| return blkcnt; |
| } |
| |
| void fsl_sata_flush_cache_ext(int dev) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| struct sata_fis_h2d h2d, *cfis = &h2d; |
| |
| memset(cfis, 0, sizeof(struct sata_fis_h2d)); |
| |
| cfis->fis_type = SATA_FIS_TYPE_REGISTER_H2D; |
| cfis->pm_port_c = 0x80; /* is command */ |
| cfis->command = ATA_CMD_FLUSH_EXT; |
| |
| fsl_sata_exec_cmd(sata, cfis, CMD_ATA, 0, NULL, 0); |
| } |
| |
| /* Software reset, set SRST of the Device Control register */ |
| void fsl_sata_software_reset(int dev) |
| { |
| return; |
| } |
| |
| static void fsl_sata_init_wcache(int dev, u16 *id) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| |
| if (ata_id_has_wcache(id) && ata_id_wcache_enabled(id)) |
| sata->wcache = 1; |
| if (ata_id_has_flush(id)) |
| sata->flush = 1; |
| if (ata_id_has_flush_ext(id)) |
| sata->flush_ext = 1; |
| } |
| |
| static int fsl_sata_get_wcache(int dev) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| return sata->wcache; |
| } |
| |
| static int fsl_sata_get_flush(int dev) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| return sata->flush; |
| } |
| |
| static int fsl_sata_get_flush_ext(int dev) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| return sata->flush_ext; |
| } |
| |
| u32 ata_low_level_rw_lba48(int dev, u32 blknr, u32 blkcnt, void *buffer, int is_write) |
| { |
| u32 start, blks; |
| u8 *addr; |
| int max_blks; |
| |
| start = blknr; |
| blks = blkcnt; |
| addr = (u8 *)buffer; |
| |
| max_blks = ATA_MAX_SECTORS_LBA48; |
| do { |
| if (blks > max_blks) { |
| if (fsl_sata_info[dev].flags != FLAGS_FPDMA) |
| fsl_sata_rw_cmd_ext(dev, start, max_blks, addr, is_write); |
| else |
| fsl_sata_rw_ncq_cmd(dev, start, max_blks, addr, is_write); |
| start += max_blks; |
| blks -= max_blks; |
| addr += ATA_SECT_SIZE * max_blks; |
| } else { |
| if (fsl_sata_info[dev].flags != FLAGS_FPDMA) |
| fsl_sata_rw_cmd_ext(dev, start, blks, addr, is_write); |
| else |
| fsl_sata_rw_ncq_cmd(dev, start, blks, addr, is_write); |
| start += blks; |
| blks = 0; |
| addr += ATA_SECT_SIZE * blks; |
| } |
| } while (blks != 0); |
| |
| return blkcnt; |
| } |
| |
| u32 ata_low_level_rw_lba28(int dev, u32 blknr, u32 blkcnt, void *buffer, int is_write) |
| { |
| u32 start, blks; |
| u8 *addr; |
| int max_blks; |
| |
| start = blknr; |
| blks = blkcnt; |
| addr = (u8 *)buffer; |
| |
| max_blks = ATA_MAX_SECTORS; |
| do { |
| if (blks > max_blks) { |
| fsl_sata_rw_cmd(dev, start, max_blks, addr, is_write); |
| start += max_blks; |
| blks -= max_blks; |
| addr += ATA_SECT_SIZE * max_blks; |
| } else { |
| fsl_sata_rw_cmd(dev, start, blks, addr, is_write); |
| start += blks; |
| blks = 0; |
| addr += ATA_SECT_SIZE * blks; |
| } |
| } while (blks != 0); |
| |
| return blkcnt; |
| } |
| |
| /* |
| * SATA interface between low level driver and command layer |
| */ |
| ulong sata_read(int dev, u32 blknr, u32 blkcnt, void *buffer) |
| { |
| u32 rc; |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| |
| if (sata->lba48) |
| rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, READ_CMD); |
| else |
| rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, READ_CMD); |
| return rc; |
| } |
| |
| ulong sata_write(int dev, u32 blknr, u32 blkcnt, void *buffer) |
| { |
| u32 rc; |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| |
| if (sata->lba48) { |
| rc = ata_low_level_rw_lba48(dev, blknr, blkcnt, buffer, WRITE_CMD); |
| if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush_ext(dev)) |
| fsl_sata_flush_cache_ext(dev); |
| } else { |
| rc = ata_low_level_rw_lba28(dev, blknr, blkcnt, buffer, WRITE_CMD); |
| if (fsl_sata_get_wcache(dev) && fsl_sata_get_flush(dev)) |
| fsl_sata_flush_cache(dev); |
| } |
| return rc; |
| } |
| |
| int scan_sata(int dev) |
| { |
| fsl_sata_t *sata = (fsl_sata_t *)sata_dev_desc[dev].priv; |
| unsigned char serial[ATA_ID_SERNO_LEN + 1]; |
| unsigned char firmware[ATA_ID_FW_REV_LEN + 1]; |
| unsigned char product[ATA_ID_PROD_LEN + 1]; |
| u16 *id; |
| u64 n_sectors; |
| |
| /* if no detected link */ |
| if (!sata->link) |
| return -1; |
| |
| id = (u16 *)malloc(ATA_ID_WORDS * 2); |
| if (!id) { |
| printf("id malloc failed\n\r"); |
| return -1; |
| } |
| |
| /* Identify device to get information */ |
| fsl_sata_identify(dev, id); |
| |
| /* Serial number */ |
| ata_id_c_string(id, serial, ATA_ID_SERNO, sizeof(serial)); |
| memcpy(sata_dev_desc[dev].product, serial, sizeof(serial)); |
| |
| /* Firmware version */ |
| ata_id_c_string(id, firmware, ATA_ID_FW_REV, sizeof(firmware)); |
| memcpy(sata_dev_desc[dev].revision, firmware, sizeof(firmware)); |
| |
| /* Product model */ |
| ata_id_c_string(id, product, ATA_ID_PROD, sizeof(product)); |
| memcpy(sata_dev_desc[dev].vendor, product, sizeof(product)); |
| |
| /* Totoal sectors */ |
| n_sectors = ata_id_n_sectors(id); |
| sata_dev_desc[dev].lba = (u32)n_sectors; |
| |
| #ifdef CONFIG_LBA48 |
| /* Check if support LBA48 */ |
| if (ata_id_has_lba48(id)) { |
| sata->lba48 = 1; |
| debug("Device support LBA48\n\r"); |
| } else |
| debug("Device supports LBA28\n\r"); |
| #endif |
| |
| /* Get the NCQ queue depth from device */ |
| sata->queue_depth = ata_id_queue_depth(id); |
| |
| /* Get the xfer mode from device */ |
| fsl_sata_xfer_mode(dev, id); |
| |
| /* Get the write cache status from device */ |
| fsl_sata_init_wcache(dev, id); |
| |
| /* Set the xfer mode to highest speed */ |
| fsl_sata_set_features(dev); |
| #ifdef DEBUG |
| fsl_sata_identify(dev, id); |
| ata_dump_id(id); |
| #endif |
| free((void *)id); |
| return 0; |
| } |