include/configs/trats2.h - github/trini/u-boot - Gitiles

 /*
  * Copyright (C) 2013 Samsung Electronics
  * Sanghee Kim <sh0130.kim@samsung.com>
  * Piotr Wilczek <p.wilczek@samsung.com>
  *
  * Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __CONFIG_TRATS2_H
 #define __CONFIG_TRATS2_H

 #include <configs/exynos4-dt.h>

 #define CONFIG_SYS_PROMPT	"Trats2 # "	/* Monitor Command Prompt */

 #undef CONFIG_DEFAULT_DEVICE_TREE
 #define CONFIG_DEFAULT_DEVICE_TREE	exynos4412-trats2

 #define CONFIG_TIZEN			/* TIZEN lib */

 #define CONFIG_SYS_L2CACHE_OFF
 #ifndef CONFIG_SYS_L2CACHE_OFF
 #define CONFIG_SYS_L2_PL310
 #define CONFIG_SYS_PL310_BASE	0x10502000
 #endif

 /* TRATS2 has 4 banks of DRAM */
 #define CONFIG_NR_DRAM_BANKS		4
 #define CONFIG_SYS_SDRAM_BASE		0x40000000
 #define PHYS_SDRAM_1			CONFIG_SYS_SDRAM_BASE
 #define SDRAM_BANK_SIZE			(256 << 20)	/* 256 MB */
 /* memtest works on */
 #define CONFIG_SYS_MEMTEST_START	CONFIG_SYS_SDRAM_BASE
 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_SDRAM_BASE + 0x5E00000)
 #define CONFIG_SYS_LOAD_ADDR		(CONFIG_SYS_SDRAM_BASE + 0x3E00000)

 #define CONFIG_SYS_TEXT_BASE		0x43e00000

 #include <linux/sizes.h>
 /* Size of malloc() pool */
 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + (80 * SZ_1M))

 /* select serial console configuration */
 #define CONFIG_SERIAL2
 #define CONFIG_BAUDRATE			115200

 /* Console configuration */
 #define CONFIG_SYS_CONSOLE_INFO_QUIET
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV

 #define CONFIG_BOOTARGS			"Please use defined boot"
 #define CONFIG_BOOTCOMMAND		"run mmcboot"
 #define CONFIG_DEFAULT_CONSOLE		"console=ttySAC2,115200n8\0"

 #define CONFIG_SYS_INIT_SP_ADDR	(CONFIG_SYS_LOAD_ADDR \
 					- GENERATED_GBL_DATA_SIZE)

 #define CONFIG_SYS_MEM_TOP_HIDE	(1 << 20)	/* ram console */

 #define CONFIG_SYS_MONITOR_BASE	0x00000000

 #define CONFIG_ENV_IS_IN_MMC
 #define CONFIG_SYS_MMC_ENV_DEV		CONFIG_MMC_DEFAULT_DEV
 #define CONFIG_ENV_SIZE			4096
 #define CONFIG_ENV_OFFSET		((32 - 4) << 10) /* 32KiB - 4KiB */

 #define CONFIG_ENV_OVERWRITE

 #define CONFIG_ENV_VARS_UBOOT_CONFIG
 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

 /* Tizen - partitions definitions */
 #define PARTS_CSA		"csa-mmc"
 #define PARTS_BOOT		"boot"
 #define PARTS_QBOOT		"qboot"
 #define PARTS_CSC		"csc"
 #define PARTS_ROOT		"platform"
 #define PARTS_DATA		"data"
 #define PARTS_UMS		"ums"

 #define PARTS_DEFAULT \
 	"uuid_disk=${uuid_gpt_disk};" \
 	"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
 	"name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
 	"name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
 	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
 	"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
 	"name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
 	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \

 #define CONFIG_DFU_ALT \
 	"u-boot raw 0x80 0x800;" \
 	"/uImage ext4 0 2;" \
 	"/modem.bin ext4 0 2;" \
 	"/exynos4412-trats2.dtb ext4 0 2;" \
 	""PARTS_CSA" part 0 1;" \
 	""PARTS_BOOT" part 0 2;" \
 	""PARTS_QBOOT" part 0 3;" \
 	""PARTS_CSC" part 0 4;" \
 	""PARTS_ROOT" part 0 5;" \
 	""PARTS_DATA" part 0 6;" \
 	""PARTS_UMS" part 0 7;" \
 	"params.bin raw 0x38 0x8\0"

 #define CONFIG_EXTRA_ENV_SETTINGS \
 	"bootk=" \
 		"run loaduimage;" \
 		"if run loaddtb; then " \
 			"bootm 0x40007FC0 - ${fdtaddr};" \
 		"fi;" \
 		"bootm 0x40007FC0;\0" \
 	"updatebackup=" \
 		"mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
 		" mmc dev 0 0\0" \
 	"updatebootb=" \
 		"mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
 	"mmcboot=" \
 		"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 		"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 		"run bootk\0" \
 	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
 	"verify=n\0" \
 	"rootfstype=ext4\0" \
 	"console=" CONFIG_DEFAULT_CONSOLE \
 	"kernelname=uImage\0" \
 	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
 		"${kernelname}\0" \
 	"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
 		"${fdtfile}\0" \
 	"mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
 	"mmcbootpart=2\0" \
 	"mmcrootpart=5\0" \
 	"opts=always_resume=1\0" \
 	"partitions=" PARTS_DEFAULT \
 	"dfu_alt_info=" CONFIG_DFU_ALT \
 	"uartpath=ap\0" \
 	"usbpath=ap\0" \
 	"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
 	"consoleoff=set console console=ram; save; reset\0" \
 	"spladdr=0x40000100\0" \
 	"splsize=0x200\0" \
 	"splfile=falcon.bin\0" \
 	"spl_export=" \
 		   "setexpr spl_imgsize ${splsize} + 8 ;" \
 		   "setenv spl_imgsize 0x${spl_imgsize};" \
 		   "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 		   "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 		   "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 		   "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 		   "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 		   "spl export atags 0x40007FC0;" \
 		   "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 		   "mw.l ${spl_addr_tmp} ${splsize};" \
 		   "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 		   " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 		   "setenv spl_imgsize;" \
 		   "setenv spl_imgaddr;" \
 		   "setenv spl_addr_tmp;\0" \
 	"fdtaddr=40800000\0" \

 /* GPT */
 #define CONFIG_RANDOM_UUID

 /* I2C */
 #include <asm/arch/gpio.h>

 #define CONFIG_CMD_I2C

 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_S3C24X0
 #define CONFIG_SYS_I2C_S3C24X0_SPEED	100000
 #define CONFIG_SYS_I2C_S3C24X0_SLAVE	0
 #define CONFIG_MAX_I2C_NUM		8
 #define CONFIG_SYS_I2C_SOFT
 #define CONFIG_SYS_I2C_SOFT_SPEED	50000
 #define CONFIG_SYS_I2C_SOFT_SLAVE	0x00
 #define I2C_SOFT_DECLARATIONS2
 #define CONFIG_SYS_I2C_SOFT_SPEED_2     50000
 #define CONFIG_SYS_I2C_SOFT_SLAVE_2     0x00
 #define CONFIG_SOFT_I2C_READ_REPEATED_START
 #define CONFIG_SYS_I2C_INIT_BOARD

 #ifndef __ASSEMBLY__
 int get_soft_i2c_scl_pin(void);
 int get_soft_i2c_sda_pin(void);
 #endif
 #define CONFIG_SOFT_I2C_GPIO_SCL	get_soft_i2c_scl_pin()
 #define CONFIG_SOFT_I2C_GPIO_SDA	get_soft_i2c_sda_pin()

 /* POWER */
 #define CONFIG_POWER
 #define CONFIG_POWER_I2C
 #define CONFIG_POWER_MAX77686
 #define CONFIG_POWER_PMIC_MAX77693
 #define CONFIG_POWER_MUIC_MAX77693
 #define CONFIG_POWER_FG_MAX77693
 #define CONFIG_POWER_BATTERY_TRATS2

 /* Security subsystem - enable hw_rand() */
 #define CONFIG_EXYNOS_ACE_SHA
 #define CONFIG_LIB_HW_RAND

 /* Common misc for Samsung */
 #define CONFIG_MISC_COMMON

 #define CONFIG_MISC_INIT_R

 /* Download menu - Samsung common */
 #define CONFIG_LCD_MENU
 #define CONFIG_LCD_MENU_BOARD

 /* Download menu - definitions for check keys */
 #ifndef __ASSEMBLY__
 #include <power/max77686_pmic.h>

 #define KEY_PWR_PMIC_NAME		"MAX77686_PMIC"
 #define KEY_PWR_STATUS_REG		MAX77686_REG_PMIC_STATUS1
 #define KEY_PWR_STATUS_MASK		(1 << 0)
 #define KEY_PWR_INTERRUPT_REG		MAX77686_REG_PMIC_INT1
 #define KEY_PWR_INTERRUPT_MASK		(1 << 1)

 #define KEY_VOL_UP_GPIO			EXYNOS4X12_GPIO_X22
 #define KEY_VOL_DOWN_GPIO		EXYNOS4X12_GPIO_X33
 #endif /* __ASSEMBLY__ */

 /* LCD console */
 #define LCD_BPP                 LCD_COLOR16
 #define CONFIG_SYS_WHITE_ON_BLACK

 /* LCD */
 #define CONFIG_EXYNOS_FB
 #define CONFIG_LCD
 #define CONFIG_CMD_BMP
 #define CONFIG_BMP_16BPP
 #define CONFIG_FB_ADDR		0x52504000
 #define CONFIG_S6E8AX0
 #define CONFIG_EXYNOS_MIPI_DSIM
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)

 #define LCD_XRES	720
 #define LCD_YRES	1280

 #endif	/* __CONFIG_H */
	/*
	* Copyright (C) 2013 Samsung Electronics
	* Sanghee Kim <sh0130.kim@samsung.com>
	* Piotr Wilczek <p.wilczek@samsung.com>
	*
	* Configuation settings for the SAMSUNG TRATS2 (EXYNOS4412) board.
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __CONFIG_TRATS2_H
	#define __CONFIG_TRATS2_H

	#include <configs/exynos4-dt.h>

	#define CONFIG_SYS_PROMPT "Trats2 # " /* Monitor Command Prompt */

	#undef CONFIG_DEFAULT_DEVICE_TREE
	#define CONFIG_DEFAULT_DEVICE_TREE exynos4412-trats2

	#define CONFIG_TIZEN /* TIZEN lib */

	#define CONFIG_SYS_L2CACHE_OFF
	#ifndef CONFIG_SYS_L2CACHE_OFF
	#define CONFIG_SYS_L2_PL310
	#define CONFIG_SYS_PL310_BASE 0x10502000
	#endif

	/* TRATS2 has 4 banks of DRAM */
	#define CONFIG_NR_DRAM_BANKS 4
	#define CONFIG_SYS_SDRAM_BASE 0x40000000
	#define PHYS_SDRAM_1 CONFIG_SYS_SDRAM_BASE
	#define SDRAM_BANK_SIZE (256 << 20) /* 256 MB */
	/* memtest works on */
	#define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE
	#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x5E00000)
	#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 0x3E00000)

	#define CONFIG_SYS_TEXT_BASE 0x43e00000

	#include <linux/sizes.h>
	/* Size of malloc() pool */
	#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (80 * SZ_1M))

	/* select serial console configuration */
	#define CONFIG_SERIAL2
	#define CONFIG_BAUDRATE 115200

	/* Console configuration */
	#define CONFIG_SYS_CONSOLE_INFO_QUIET
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV

	#define CONFIG_BOOTARGS "Please use defined boot"
	#define CONFIG_BOOTCOMMAND "run mmcboot"
	#define CONFIG_DEFAULT_CONSOLE "console=ttySAC2,115200n8\0"

	#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
	- GENERATED_GBL_DATA_SIZE)

	#define CONFIG_SYS_MEM_TOP_HIDE (1 << 20) /* ram console */

	#define CONFIG_SYS_MONITOR_BASE 0x00000000

	#define CONFIG_ENV_IS_IN_MMC
	#define CONFIG_SYS_MMC_ENV_DEV CONFIG_MMC_DEFAULT_DEV
	#define CONFIG_ENV_SIZE 4096
	#define CONFIG_ENV_OFFSET ((32 - 4) << 10) /* 32KiB - 4KiB */

	#define CONFIG_ENV_OVERWRITE

	#define CONFIG_ENV_VARS_UBOOT_CONFIG
	#define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG

	/* Tizen - partitions definitions */
	#define PARTS_CSA "csa-mmc"
	#define PARTS_BOOT "boot"
	#define PARTS_QBOOT "qboot"
	#define PARTS_CSC "csc"
	#define PARTS_ROOT "platform"
	#define PARTS_DATA "data"
	#define PARTS_UMS "ums"

	#define PARTS_DEFAULT \
	"uuid_disk=${uuid_gpt_disk};" \
	"name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
	"name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
	"name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
	"name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
	"name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
	"name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
	"name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \

	#define CONFIG_DFU_ALT \
	"u-boot raw 0x80 0x800;" \
	"/uImage ext4 0 2;" \
	"/modem.bin ext4 0 2;" \
	"/exynos4412-trats2.dtb ext4 0 2;" \
	""PARTS_CSA" part 0 1;" \
	""PARTS_BOOT" part 0 2;" \
	""PARTS_QBOOT" part 0 3;" \
	""PARTS_CSC" part 0 4;" \
	""PARTS_ROOT" part 0 5;" \
	""PARTS_DATA" part 0 6;" \
	""PARTS_UMS" part 0 7;" \
	"params.bin raw 0x38 0x8\0"

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"bootk=" \
	"run loaduimage;" \
	"if run loaddtb; then " \
	"bootm 0x40007FC0 - ${fdtaddr};" \
	"fi;" \
	"bootm 0x40007FC0;\0" \
	"updatebackup=" \
	"mmc dev 0 2; mmc write 0x51000000 0 0x800;" \
	" mmc dev 0 0\0" \
	"updatebootb=" \
	"mmc read 0x51000000 0x80 0x800; run updatebackup\0" \
	"mmcboot=" \
	"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
	"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
	"run bootk\0" \
	"bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
	"boottrace=setenv opts initcall_debug; run bootcmd\0" \
	"verify=n\0" \
	"rootfstype=ext4\0" \
	"console=" CONFIG_DEFAULT_CONSOLE \
	"kernelname=uImage\0" \
	"loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 " \
	"${kernelname}\0" \
	"loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
	"${fdtfile}\0" \
	"mmcdev=" __stringify(CONFIG_MMC_DEFAULT_DEV) "\0" \
	"mmcbootpart=2\0" \
	"mmcrootpart=5\0" \
	"opts=always_resume=1\0" \
	"partitions=" PARTS_DEFAULT \
	"dfu_alt_info=" CONFIG_DFU_ALT \
	"uartpath=ap\0" \
	"usbpath=ap\0" \
	"consoleon=set console console=ttySAC2,115200n8; save; reset\0" \
	"consoleoff=set console console=ram; save; reset\0" \
	"spladdr=0x40000100\0" \
	"splsize=0x200\0" \
	"splfile=falcon.bin\0" \
	"spl_export=" \
	"setexpr spl_imgsize ${splsize} + 8 ;" \
	"setenv spl_imgsize 0x${spl_imgsize};" \
	"setexpr spl_imgaddr ${spladdr} - 8 ;" \
	"setexpr spl_addr_tmp ${spladdr} - 4 ;" \
	"mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
	"setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
	"${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
	"spl export atags 0x40007FC0;" \
	"crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
	"mw.l ${spl_addr_tmp} ${splsize};" \
	"ext4write mmc ${mmcdev}:${mmcbootpart}" \
	" /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
	"setenv spl_imgsize;" \
	"setenv spl_imgaddr;" \
	"setenv spl_addr_tmp;\0" \
	"fdtaddr=40800000\0" \

	/* GPT */
	#define CONFIG_RANDOM_UUID

	/* I2C */
	#include <asm/arch/gpio.h>

	#define CONFIG_CMD_I2C

	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_S3C24X0
	#define CONFIG_SYS_I2C_S3C24X0_SPEED 100000
	#define CONFIG_SYS_I2C_S3C24X0_SLAVE 0
	#define CONFIG_MAX_I2C_NUM 8
	#define CONFIG_SYS_I2C_SOFT
	#define CONFIG_SYS_I2C_SOFT_SPEED 50000
	#define CONFIG_SYS_I2C_SOFT_SLAVE 0x00
	#define I2C_SOFT_DECLARATIONS2
	#define CONFIG_SYS_I2C_SOFT_SPEED_2 50000
	#define CONFIG_SYS_I2C_SOFT_SLAVE_2 0x00
	#define CONFIG_SOFT_I2C_READ_REPEATED_START
	#define CONFIG_SYS_I2C_INIT_BOARD

	#ifndef __ASSEMBLY__
	int get_soft_i2c_scl_pin(void);
	int get_soft_i2c_sda_pin(void);
	#endif
	#define CONFIG_SOFT_I2C_GPIO_SCL get_soft_i2c_scl_pin()
	#define CONFIG_SOFT_I2C_GPIO_SDA get_soft_i2c_sda_pin()

	/* POWER */
	#define CONFIG_POWER
	#define CONFIG_POWER_I2C
	#define CONFIG_POWER_MAX77686
	#define CONFIG_POWER_PMIC_MAX77693
	#define CONFIG_POWER_MUIC_MAX77693
	#define CONFIG_POWER_FG_MAX77693
	#define CONFIG_POWER_BATTERY_TRATS2

	/* Security subsystem - enable hw_rand() */
	#define CONFIG_EXYNOS_ACE_SHA
	#define CONFIG_LIB_HW_RAND

	/* Common misc for Samsung */
	#define CONFIG_MISC_COMMON

	#define CONFIG_MISC_INIT_R

	/* Download menu - Samsung common */
	#define CONFIG_LCD_MENU
	#define CONFIG_LCD_MENU_BOARD

	/* Download menu - definitions for check keys */
	#ifndef __ASSEMBLY__
	#include <power/max77686_pmic.h>

	#define KEY_PWR_PMIC_NAME "MAX77686_PMIC"
	#define KEY_PWR_STATUS_REG MAX77686_REG_PMIC_STATUS1
	#define KEY_PWR_STATUS_MASK (1 << 0)
	#define KEY_PWR_INTERRUPT_REG MAX77686_REG_PMIC_INT1
	#define KEY_PWR_INTERRUPT_MASK (1 << 1)

	#define KEY_VOL_UP_GPIO EXYNOS4X12_GPIO_X22
	#define KEY_VOL_DOWN_GPIO EXYNOS4X12_GPIO_X33
	#endif /* __ASSEMBLY__ */

	/* LCD console */
	#define LCD_BPP LCD_COLOR16
	#define CONFIG_SYS_WHITE_ON_BLACK

	/* LCD */
	#define CONFIG_EXYNOS_FB
	#define CONFIG_LCD
	#define CONFIG_CMD_BMP
	#define CONFIG_BMP_16BPP
	#define CONFIG_FB_ADDR 0x52504000
	#define CONFIG_S6E8AX0
	#define CONFIG_EXYNOS_MIPI_DSIM
	#define CONFIG_VIDEO_BMP_GZIP
	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)

	#define LCD_XRES 720
	#define LCD_YRES 1280

	#endif /* __CONFIG_H */