include/configs/m53evk.h - github/trini/u-boot - Gitiles

 /*
  * DENX M53 configuration
  * Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #ifndef __M53EVK_CONFIG_H__
 #define __M53EVK_CONFIG_H__

 #define CONFIG_MX53
 #define CONFIG_SYS_GENERIC_BOARD
 #define CONFIG_MXC_GPIO

 #include <asm/arch/imx-regs.h>

 #define CONFIG_DISPLAY_CPUINFO
 #define CONFIG_BOARD_EARLY_INIT_F
 #define CONFIG_REVISION_TAG
 #define CONFIG_SYS_NO_FLASH

 #define CONFIG_FIT

 #define CONFIG_TIMESTAMP		/* Print image info with timestamp */

 /*
  * U-Boot Commands
  */
 #include <config_cmd_default.h>
 #define CONFIG_DISPLAY_BOARDINFO
 #define CONFIG_DOS_PARTITION
 #define CONFIG_FAT_WRITE

 #define CONFIG_CMD_ASKENV
 #define CONFIG_CMD_BMP
 #define CONFIG_CMD_DATE
 #define CONFIG_CMD_DHCP
 #define CONFIG_CMD_EXT4
 #define CONFIG_CMD_EXT4_WRITE
 #define CONFIG_CMD_FAT
 #define CONFIG_CMD_GREPENV
 #define CONFIG_CMD_I2C
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_MMC
 #define CONFIG_CMD_NAND
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SATA
 #define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_USB
 #define CONFIG_VIDEO

 #define CONFIG_REGEX			/* Enable regular expression support */

 /*
  * Memory configurations
  */
 #define CONFIG_NR_DRAM_BANKS		2
 #define PHYS_SDRAM_1			CSD0_BASE_ADDR
 #define PHYS_SDRAM_1_SIZE		(gd->bd->bi_dram[0].size)
 #define PHYS_SDRAM_2			CSD1_BASE_ADDR
 #define PHYS_SDRAM_2_SIZE		(gd->bd->bi_dram[1].size)
 #define PHYS_SDRAM_SIZE			(gd->ram_size)
 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
 #define CONFIG_SYS_MEMTEST_START	0x70000000
 #define CONFIG_SYS_MEMTEST_END		0x8ff00000

 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
 #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)

 #define CONFIG_SYS_INIT_SP_OFFSET \
 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_ADDR \
 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

 #define CONFIG_SYS_TEXT_BASE		0x71000000

 /*
  * U-Boot general configurations
  */
 #define CONFIG_SYS_LONGHELP
 #define CONFIG_SYS_CBSIZE	1024		/* Console I/O buffer size */
 #define CONFIG_SYS_PBSIZE	\
 	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 						/* Print buffer size */
 #define CONFIG_SYS_MAXARGS	32		/* Max number of command args */
 #define CONFIG_SYS_BARGSIZE	CONFIG_SYS_CBSIZE
 						/* Boot argument buffer size */
 #define CONFIG_VERSION_VARIABLE			/* U-BOOT version */
 #define CONFIG_AUTO_COMPLETE			/* Command auto complete */
 #define CONFIG_CMDLINE_EDITING			/* Command history etc */
 #define CONFIG_SYS_HUSH_PARSER

 /*
  * Serial Driver
  */
 #define CONFIG_MXC_UART
 #define CONFIG_MXC_UART_BASE		UART2_BASE
 #define CONFIG_CONS_INDEX		1
 #define CONFIG_BAUDRATE			115200

 /*
  * MMC Driver
  */
 #ifdef CONFIG_CMD_MMC
 #define CONFIG_MMC
 #define CONFIG_GENERIC_MMC
 #define CONFIG_FSL_ESDHC
 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
 #define CONFIG_SYS_FSL_ESDHC_NUM	1
 #endif

 /*
  * NAND
  */
 #define CONFIG_ENV_SIZE			(16 * 1024)
 #ifdef CONFIG_CMD_NAND
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR_AXI
 #define CONFIG_NAND_MXC
 #define CONFIG_MXC_NAND_REGS_BASE	NFC_BASE_ADDR_AXI
 #define CONFIG_MXC_NAND_IP_REGS_BASE	NFC_BASE_ADDR
 #define CONFIG_SYS_NAND_LARGEPAGE
 #define CONFIG_MXC_NAND_HWECC
 #define CONFIG_SYS_NAND_USE_FLASH_BBT

 /* Environment is in NAND */
 #define CONFIG_ENV_IS_IN_NAND
 #define CONFIG_ENV_SIZE_REDUND		CONFIG_ENV_SIZE
 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
 #define CONFIG_ENV_RANGE		(4 * CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_OFFSET		(8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
 #define CONFIG_ENV_OFFSET_REDUND	\
 		(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)

 #define CONFIG_CMD_UBI
 #define CONFIG_CMD_UBIFS
 #define CONFIG_CMD_MTDPARTS
 #define CONFIG_RBTREE
 #define CONFIG_LZO
 #define CONFIG_MTD_DEVICE
 #define CONFIG_MTD_PARTITIONS
 #define MTDIDS_DEFAULT			"nand0=mxc_nand"
 #define MTDPARTS_DEFAULT			\
 	"mtdparts=mxc_nand:"			\
 		"1024k(u-boot),"		\
 		"512k(env1),"			\
 		"512k(env2),"			\
 		"14m(boot),"			\
 		"240m(data),"			\
 		"-@2048k(UBI)"
 #else
 #define CONFIG_ENV_IS_NOWHERE
 #endif

 /*
  * Ethernet on SOC (FEC)
  */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_FEC_MXC
 #define IMX_FEC_BASE			FEC_BASE_ADDR
 #define CONFIG_FEC_MXC_PHYADDR		0x0
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 #define CONFIG_FEC_XCV_TYPE		RMII
 #define CONFIG_PHYLIB
 #define CONFIG_PHY_MICREL
 #define CONFIG_ETHPRIME			"FEC0"
 #endif

 /*
  * I2C
  */
 #ifdef CONFIG_CMD_I2C
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_MXC
 #define CONFIG_SYS_SPD_BUS_NUM		1 /* I2C2 */
 #endif

 /*
  * RTC
  */
 #ifdef CONFIG_CMD_DATE
 #define CONFIG_RTC_M41T62
 #define CONFIG_SYS_I2C_RTC_ADDR		0x68
 #define CONFIG_SYS_M41T11_BASE_YEAR	2000
 #endif

 /*
  * USB
  */
 #ifdef CONFIG_CMD_USB
 #define CONFIG_USB_EHCI
 #define CONFIG_USB_EHCI_MX5
 #define CONFIG_USB_STORAGE
 #define CONFIG_USB_HOST_ETHER
 #define CONFIG_USB_ETHER_ASIX
 #define CONFIG_USB_ETHER_MCS7830
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_MXC_USB_PORT		1
 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
 #define CONFIG_MXC_USB_FLAGS		0
 #endif

 /*
  * SATA
  */
 #ifdef CONFIG_CMD_SATA
 #define CONFIG_DWC_AHSATA
 #define CONFIG_SYS_SATA_MAX_DEVICE	1
 #define CONFIG_DWC_AHSATA_PORT_ID	0
 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_BASE_ADDR
 #define CONFIG_LBA48
 #define CONFIG_LIBATA
 #endif

 /*
  * LCD
  */
 #ifdef CONFIG_VIDEO
 #define CONFIG_VIDEO_IPUV3
 #define CONFIG_CFB_CONSOLE
 #define CONFIG_VGA_AS_SINGLE_DEVICE
 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
 #define CONFIG_VIDEO_BMP_RLE8
 #define CONFIG_VIDEO_BMP_GZIP
 #define CONFIG_SPLASH_SCREEN
 #define CONFIG_SPLASHIMAGE_GUARD
 #define CONFIG_SPLASH_SCREEN_ALIGN
 #define CONFIG_BMP_16BPP
 #define CONFIG_VIDEO_LOGO
 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE	(2 << 20)
 #define CONFIG_IPUV3_CLK		200000000
 #endif

 /*
  * Boot Linux
  */
 #define CONFIG_CMDLINE_TAG
 #define CONFIG_INITRD_TAG
 #define CONFIG_REVISION_TAG
 #define CONFIG_SETUP_MEMORY_TAGS
 #define CONFIG_BOOTDELAY	3
 #define CONFIG_BOOTFILE		"fitImage"
 #define CONFIG_BOOTARGS		"console=ttymxc1,115200"
 #define CONFIG_LOADADDR		0x70800000
 #define CONFIG_BOOTCOMMAND	"run mmc_mmc"
 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
 #define CONFIG_OF_LIBFDT

 /*
  * NAND SPL
  */
 #define CONFIG_SPL_FRAMEWORK
 #define CONFIG_SPL_TARGET		"u-boot-with-nand-spl.imx"
 #define CONFIG_SPL_BOARD_INIT
 #define CONFIG_SPL_TEXT_BASE		0x70008000
 #define CONFIG_SPL_PAD_TO		0x8000
 #define CONFIG_SPL_STACK		0x70004000
 #define CONFIG_SPL_GPIO_SUPPORT
 #define CONFIG_SPL_LIBCOMMON_SUPPORT
 #define CONFIG_SPL_LIBGENERIC_SUPPORT
 #define CONFIG_SPL_NAND_SUPPORT
 #define CONFIG_SPL_SERIAL_SUPPORT

 #define CONFIG_SYS_NAND_U_BOOT_OFFS	CONFIG_SPL_PAD_TO
 #define CONFIG_SYS_NAND_PAGE_SIZE	2048
 #define CONFIG_SYS_NAND_OOBSIZE		64
 #define CONFIG_SYS_NAND_PAGE_COUNT	64
 #define CONFIG_SYS_NAND_SIZE		(256 * 1024 * 1024)
 #define CONFIG_SYS_NAND_BAD_BLOCK_POS	0

 /*
  * Extra Environments
  */
 #define CONFIG_PREBOOT		"run try_bootscript"
 #define CONFIG_HOSTNAME		m53evk

 #define CONFIG_EXTRA_ENV_SETTINGS					\
 	"consdev=ttymxc1\0"						\
 	"baudrate=115200\0"						\
 	"bootscript=boot.scr\0"						\
 	"bootdev=/dev/mmcblk0p1\0"					\
 	"rootdev=/dev/mmcblk0p2\0"					\
 	"netdev=eth0\0"							\
 	"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0"		\
 	"kernel_addr_r=0x72000000\0"					\
 	"addcons="							\
 		"setenv bootargs ${bootargs} "				\
 		"console=${consdev},${baudrate}\0"			\
 	"addip="							\
 		"setenv bootargs ${bootargs} "				\
 		"ip=${ipaddr}:${serverip}:${gatewayip}:"		\
 			"${netmask}:${hostname}:${netdev}:off\0"	\
 	"addmisc="							\
 		"setenv bootargs ${bootargs} ${miscargs}\0"		\
 	"adddfltmtd="							\
 		"if test \"x${mtdparts}\" == \"x\" ; then "		\
 			"mtdparts default ; "				\
 		"fi\0"							\
 	"addmtd="							\
 		"run adddfltmtd ; "					\
 		"setenv bootargs ${bootargs} ${mtdparts}\0"		\
 	"addargs=run addcons addmtd addmisc\0"				\
 	"mmcload="							\
 		"mmc rescan ; "						\
 		"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0"	\
 	"ubiload="							\
 		"ubi part UBI ; ubifsmount ubi0:rootfs ; "		\
 		"ubifsload ${kernel_addr_r} /boot/${bootfile}\0"	\
 	"netload="							\
 		"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"	\
 	"miscargs=nohlt panic=1\0"					\
 	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"		\
 	"ubiargs="							\
 		"setenv bootargs ubi.mtd=5 "				\
 		"root=ubi0:rootfs rootfstype=ubifs\0"			\
 	"nfsargs="							\
 		"setenv bootargs root=/dev/nfs rw "			\
 			"nfsroot=${serverip}:${rootpath},v3,tcp\0"	\
 	"mmc_mmc="							\
 		"run mmcload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"mmc_ubi="							\
 		"run mmcload ubiargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"mmc_nfs="							\
 		"run mmcload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"ubi_mmc="							\
 		"run ubiload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"ubi_ubi="							\
 		"run ubiload ubiargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"ubi_nfs="							\
 		"run ubiload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"net_mmc="							\
 		"run netload mmcargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"net_ubi="							\
 		"run netload ubiargs addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"net_nfs="							\
 		"run netload nfsargs addip addargs ; "			\
 		"bootm ${kernel_addr_r}\0"				\
 	"try_bootscript="						\
 		"mmc rescan;"						\
 		"if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};"	\
 		"then;"							\
 			"\techo Running bootscript...;"			\
 			"\tsource ${kernel_addr_r};"			\
 		"fi\0"

 #endif	/* __M53EVK_CONFIG_H__ */
	/*
	* DENX M53 configuration
	* Copyright (C) 2012-2013 Marek Vasut <marex@denx.de>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#ifndef __M53EVK_CONFIG_H__
	#define __M53EVK_CONFIG_H__

	#define CONFIG_MX53
	#define CONFIG_SYS_GENERIC_BOARD
	#define CONFIG_MXC_GPIO

	#include <asm/arch/imx-regs.h>

	#define CONFIG_DISPLAY_CPUINFO
	#define CONFIG_BOARD_EARLY_INIT_F
	#define CONFIG_REVISION_TAG
	#define CONFIG_SYS_NO_FLASH

	#define CONFIG_FIT

	#define CONFIG_TIMESTAMP /* Print image info with timestamp */

	/*
	* U-Boot Commands
	*/
	#include <config_cmd_default.h>
	#define CONFIG_DISPLAY_BOARDINFO
	#define CONFIG_DOS_PARTITION
	#define CONFIG_FAT_WRITE

	#define CONFIG_CMD_ASKENV
	#define CONFIG_CMD_BMP
	#define CONFIG_CMD_DATE
	#define CONFIG_CMD_DHCP
	#define CONFIG_CMD_EXT4
	#define CONFIG_CMD_EXT4_WRITE
	#define CONFIG_CMD_FAT
	#define CONFIG_CMD_GREPENV
	#define CONFIG_CMD_I2C
	#define CONFIG_CMD_MII
	#define CONFIG_CMD_MMC
	#define CONFIG_CMD_NAND
	#define CONFIG_CMD_NET
	#define CONFIG_CMD_PING
	#define CONFIG_CMD_SATA
	#define CONFIG_CMD_SETEXPR
	#define CONFIG_CMD_USB
	#define CONFIG_VIDEO

	#define CONFIG_REGEX /* Enable regular expression support */

	/*
	* Memory configurations
	*/
	#define CONFIG_NR_DRAM_BANKS 2
	#define PHYS_SDRAM_1 CSD0_BASE_ADDR
	#define PHYS_SDRAM_1_SIZE (gd->bd->bi_dram[0].size)
	#define PHYS_SDRAM_2 CSD1_BASE_ADDR
	#define PHYS_SDRAM_2_SIZE (gd->bd->bi_dram[1].size)
	#define PHYS_SDRAM_SIZE (gd->ram_size)
	#define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024)
	#define CONFIG_SYS_MEMTEST_START 0x70000000
	#define CONFIG_SYS_MEMTEST_END 0x8ff00000

	#define CONFIG_SYS_SDRAM_BASE (PHYS_SDRAM_1)
	#define CONFIG_SYS_INIT_RAM_ADDR (IRAM_BASE_ADDR)
	#define CONFIG_SYS_INIT_RAM_SIZE (IRAM_SIZE)

	#define CONFIG_SYS_INIT_SP_OFFSET \
	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
	#define CONFIG_SYS_INIT_SP_ADDR \
	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)

	#define CONFIG_SYS_TEXT_BASE 0x71000000

	/*
	* U-Boot general configurations
	*/
	#define CONFIG_SYS_LONGHELP
	#define CONFIG_SYS_CBSIZE 1024 /* Console I/O buffer size */
	#define CONFIG_SYS_PBSIZE \
	(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
	/* Print buffer size */
	#define CONFIG_SYS_MAXARGS 32 /* Max number of command args */
	#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
	/* Boot argument buffer size */
	#define CONFIG_VERSION_VARIABLE /* U-BOOT version */
	#define CONFIG_AUTO_COMPLETE /* Command auto complete */
	#define CONFIG_CMDLINE_EDITING /* Command history etc */
	#define CONFIG_SYS_HUSH_PARSER

	/*
	* Serial Driver
	*/
	#define CONFIG_MXC_UART
	#define CONFIG_MXC_UART_BASE UART2_BASE
	#define CONFIG_CONS_INDEX 1
	#define CONFIG_BAUDRATE 115200

	/*
	* MMC Driver
	*/
	#ifdef CONFIG_CMD_MMC
	#define CONFIG_MMC
	#define CONFIG_GENERIC_MMC
	#define CONFIG_FSL_ESDHC
	#define CONFIG_SYS_FSL_ESDHC_ADDR 0
	#define CONFIG_SYS_FSL_ESDHC_NUM 1
	#endif

	/*
	* NAND
	*/
	#define CONFIG_ENV_SIZE (16 * 1024)
	#ifdef CONFIG_CMD_NAND
	#define CONFIG_SYS_MAX_NAND_DEVICE 1
	#define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR_AXI
	#define CONFIG_NAND_MXC
	#define CONFIG_MXC_NAND_REGS_BASE NFC_BASE_ADDR_AXI
	#define CONFIG_MXC_NAND_IP_REGS_BASE NFC_BASE_ADDR
	#define CONFIG_SYS_NAND_LARGEPAGE
	#define CONFIG_MXC_NAND_HWECC
	#define CONFIG_SYS_NAND_USE_FLASH_BBT

	/* Environment is in NAND */
	#define CONFIG_ENV_IS_IN_NAND
	#define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE
	#define CONFIG_ENV_SECT_SIZE (128 * 1024)
	#define CONFIG_ENV_RANGE (4 * CONFIG_ENV_SECT_SIZE)
	#define CONFIG_ENV_OFFSET (8 * CONFIG_ENV_SECT_SIZE) /* 1 MiB */
	#define CONFIG_ENV_OFFSET_REDUND \
	(CONFIG_ENV_OFFSET + CONFIG_ENV_RANGE)

	#define CONFIG_CMD_UBI
	#define CONFIG_CMD_UBIFS
	#define CONFIG_CMD_MTDPARTS
	#define CONFIG_RBTREE
	#define CONFIG_LZO
	#define CONFIG_MTD_DEVICE
	#define CONFIG_MTD_PARTITIONS
	#define MTDIDS_DEFAULT "nand0=mxc_nand"
	#define MTDPARTS_DEFAULT \
	"mtdparts=mxc_nand:" \
	"1024k(u-boot)," \
	"512k(env1)," \
	"512k(env2)," \
	"14m(boot)," \
	"240m(data)," \
	"-@2048k(UBI)"
	#else
	#define CONFIG_ENV_IS_NOWHERE
	#endif

	/*
	* Ethernet on SOC (FEC)
	*/
	#ifdef CONFIG_CMD_NET
	#define CONFIG_FEC_MXC
	#define IMX_FEC_BASE FEC_BASE_ADDR
	#define CONFIG_FEC_MXC_PHYADDR 0x0
	#define CONFIG_MII
	#define CONFIG_DISCOVER_PHY
	#define CONFIG_FEC_XCV_TYPE RMII
	#define CONFIG_PHYLIB
	#define CONFIG_PHY_MICREL
	#define CONFIG_ETHPRIME "FEC0"
	#endif

	/*
	* I2C
	*/
	#ifdef CONFIG_CMD_I2C
	#define CONFIG_SYS_I2C
	#define CONFIG_SYS_I2C_MXC
	#define CONFIG_SYS_SPD_BUS_NUM 1 /* I2C2 */
	#endif

	/*
	* RTC
	*/
	#ifdef CONFIG_CMD_DATE
	#define CONFIG_RTC_M41T62
	#define CONFIG_SYS_I2C_RTC_ADDR 0x68
	#define CONFIG_SYS_M41T11_BASE_YEAR 2000
	#endif

	/*
	* USB
	*/
	#ifdef CONFIG_CMD_USB
	#define CONFIG_USB_EHCI
	#define CONFIG_USB_EHCI_MX5
	#define CONFIG_USB_STORAGE
	#define CONFIG_USB_HOST_ETHER
	#define CONFIG_USB_ETHER_ASIX
	#define CONFIG_USB_ETHER_MCS7830
	#define CONFIG_USB_ETHER_SMSC95XX
	#define CONFIG_MXC_USB_PORT 1
	#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI \| PORT_PTS_PTW)
	#define CONFIG_MXC_USB_FLAGS 0
	#endif

	/*
	* SATA
	*/
	#ifdef CONFIG_CMD_SATA
	#define CONFIG_DWC_AHSATA
	#define CONFIG_SYS_SATA_MAX_DEVICE 1
	#define CONFIG_DWC_AHSATA_PORT_ID 0
	#define CONFIG_DWC_AHSATA_BASE_ADDR SATA_BASE_ADDR
	#define CONFIG_LBA48
	#define CONFIG_LIBATA
	#endif

	/*
	* LCD
	*/
	#ifdef CONFIG_VIDEO
	#define CONFIG_VIDEO_IPUV3
	#define CONFIG_CFB_CONSOLE
	#define CONFIG_VGA_AS_SINGLE_DEVICE
	#define CONFIG_SYS_CONSOLE_IS_IN_ENV
	#define CONFIG_VIDEO_BMP_RLE8
	#define CONFIG_VIDEO_BMP_GZIP
	#define CONFIG_SPLASH_SCREEN
	#define CONFIG_SPLASHIMAGE_GUARD
	#define CONFIG_SPLASH_SCREEN_ALIGN
	#define CONFIG_BMP_16BPP
	#define CONFIG_VIDEO_LOGO
	#define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20)
	#define CONFIG_IPUV3_CLK 200000000
	#endif

	/*
	* Boot Linux
	*/
	#define CONFIG_CMDLINE_TAG
	#define CONFIG_INITRD_TAG
	#define CONFIG_REVISION_TAG
	#define CONFIG_SETUP_MEMORY_TAGS
	#define CONFIG_BOOTDELAY 3
	#define CONFIG_BOOTFILE "fitImage"
	#define CONFIG_BOOTARGS "console=ttymxc1,115200"
	#define CONFIG_LOADADDR 0x70800000
	#define CONFIG_BOOTCOMMAND "run mmc_mmc"
	#define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR
	#define CONFIG_OF_LIBFDT

	/*
	* NAND SPL
	*/
	#define CONFIG_SPL_FRAMEWORK
	#define CONFIG_SPL_TARGET "u-boot-with-nand-spl.imx"
	#define CONFIG_SPL_BOARD_INIT
	#define CONFIG_SPL_TEXT_BASE 0x70008000
	#define CONFIG_SPL_PAD_TO 0x8000
	#define CONFIG_SPL_STACK 0x70004000
	#define CONFIG_SPL_GPIO_SUPPORT
	#define CONFIG_SPL_LIBCOMMON_SUPPORT
	#define CONFIG_SPL_LIBGENERIC_SUPPORT
	#define CONFIG_SPL_NAND_SUPPORT
	#define CONFIG_SPL_SERIAL_SUPPORT

	#define CONFIG_SYS_NAND_U_BOOT_OFFS CONFIG_SPL_PAD_TO
	#define CONFIG_SYS_NAND_PAGE_SIZE 2048
	#define CONFIG_SYS_NAND_OOBSIZE 64
	#define CONFIG_SYS_NAND_PAGE_COUNT 64
	#define CONFIG_SYS_NAND_SIZE (256 * 1024 * 1024)
	#define CONFIG_SYS_NAND_BAD_BLOCK_POS 0

	/*
	* Extra Environments
	*/
	#define CONFIG_PREBOOT "run try_bootscript"
	#define CONFIG_HOSTNAME m53evk

	#define CONFIG_EXTRA_ENV_SETTINGS \
	"consdev=ttymxc1\0" \
	"baudrate=115200\0" \
	"bootscript=boot.scr\0" \
	"bootdev=/dev/mmcblk0p1\0" \
	"rootdev=/dev/mmcblk0p2\0" \
	"netdev=eth0\0" \
	"rootpath=/opt/eldk-5.5/armv7a-hf/rootfs-qte-sdk\0" \
	"kernel_addr_r=0x72000000\0" \
	"addcons=" \
	"setenv bootargs ${bootargs} " \
	"console=${consdev},${baudrate}\0" \
	"addip=" \
	"setenv bootargs ${bootargs} " \
	"ip=${ipaddr}:${serverip}:${gatewayip}:" \
	"${netmask}:${hostname}:${netdev}:off\0" \
	"addmisc=" \
	"setenv bootargs ${bootargs} ${miscargs}\0" \
	"adddfltmtd=" \
	"if test \"x${mtdparts}\" == \"x\" ; then " \
	"mtdparts default ; " \
	"fi\0" \
	"addmtd=" \
	"run adddfltmtd ; " \
	"setenv bootargs ${bootargs} ${mtdparts}\0" \
	"addargs=run addcons addmtd addmisc\0" \
	"mmcload=" \
	"mmc rescan ; " \
	"ext4load mmc 0:1 ${kernel_addr_r} ${bootfile}\0" \
	"ubiload=" \
	"ubi part UBI ; ubifsmount ubi0:rootfs ; " \
	"ubifsload ${kernel_addr_r} /boot/${bootfile}\0" \
	"netload=" \
	"tftp ${kernel_addr_r} ${hostname}/${bootfile}\0" \
	"miscargs=nohlt panic=1\0" \
	"mmcargs=setenv bootargs root=${rootdev} rw rootwait\0" \
	"ubiargs=" \
	"setenv bootargs ubi.mtd=5 " \
	"root=ubi0:rootfs rootfstype=ubifs\0" \
	"nfsargs=" \
	"setenv bootargs root=/dev/nfs rw " \
	"nfsroot=${serverip}:${rootpath},v3,tcp\0" \
	"mmc_mmc=" \
	"run mmcload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"mmc_ubi=" \
	"run mmcload ubiargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"mmc_nfs=" \
	"run mmcload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"ubi_mmc=" \
	"run ubiload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"ubi_ubi=" \
	"run ubiload ubiargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"ubi_nfs=" \
	"run ubiload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"net_mmc=" \
	"run netload mmcargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"net_ubi=" \
	"run netload ubiargs addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"net_nfs=" \
	"run netload nfsargs addip addargs ; " \
	"bootm ${kernel_addr_r}\0" \
	"try_bootscript=" \
	"mmc rescan;" \
	"if ext4load mmc 0:1 ${kernel_addr_r} ${bootscript};" \
	"then;" \
	"\techo Running bootscript...;" \
	"\tsource ${kernel_addr_r};" \
	"fi\0"

	#endif /* __M53EVK_CONFIG_H__ */