| /* |
| * Copyright 1994, 1995, 2000 Neil Russell. |
| * (See License) |
| * Copyright 2000, 2001 DENX Software Engineering, Wolfgang Denk, wd@denx.de |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <net.h> |
| #include "tftp.h" |
| #include "bootp.h" |
| |
| #undef ET_DEBUG |
| |
| #if defined(CONFIG_CMD_NET) |
| |
| #define WELL_KNOWN_PORT 69 /* Well known TFTP port # */ |
| #define TIMEOUT 5 /* Seconds to timeout for a lost pkt */ |
| #ifndef CONFIG_NET_RETRY_COUNT |
| # define TIMEOUT_COUNT 10 /* # of timeouts before giving up */ |
| #else |
| # define TIMEOUT_COUNT (CONFIG_NET_RETRY_COUNT * 2) |
| #endif |
| /* (for checking the image size) */ |
| #define HASHES_PER_LINE 65 /* Number of "loading" hashes per line */ |
| |
| /* |
| * TFTP operations. |
| */ |
| #define TFTP_RRQ 1 |
| #define TFTP_WRQ 2 |
| #define TFTP_DATA 3 |
| #define TFTP_ACK 4 |
| #define TFTP_ERROR 5 |
| #define TFTP_OACK 6 |
| |
| |
| static int TftpServerPort; /* The UDP port at their end */ |
| static int TftpOurPort; /* The UDP port at our end */ |
| static int TftpTimeoutCount; |
| static ulong TftpBlock; /* packet sequence number */ |
| static ulong TftpLastBlock; /* last packet sequence number received */ |
| static ulong TftpBlockWrap; /* count of sequence number wraparounds */ |
| static ulong TftpBlockWrapOffset; /* memory offset due to wrapping */ |
| static int TftpState; |
| |
| #define STATE_RRQ 1 |
| #define STATE_DATA 2 |
| #define STATE_TOO_LARGE 3 |
| #define STATE_BAD_MAGIC 4 |
| #define STATE_OACK 5 |
| |
| #define TFTP_BLOCK_SIZE 512 /* default TFTP block size */ |
| #define TFTP_SEQUENCE_SIZE ((ulong)(1<<16)) /* sequence number is 16 bit */ |
| |
| #define DEFAULT_NAME_LEN (8 + 4 + 1) |
| static char default_filename[DEFAULT_NAME_LEN]; |
| static char *tftp_filename; |
| |
| #ifdef CFG_DIRECT_FLASH_TFTP |
| extern flash_info_t flash_info[]; |
| #endif |
| |
| /* 512 is poor choice for ethernet, MTU is typically 1500. |
| * Minus eth.hdrs thats 1468. Can get 2x better throughput with |
| * almost-MTU block sizes. At least try... fall back to 512 if need be. |
| */ |
| #define TFTP_MTU_BLOCKSIZE 1468 |
| static unsigned short TftpBlkSize=TFTP_BLOCK_SIZE; |
| static unsigned short TftpBlkSizeOption=TFTP_MTU_BLOCKSIZE; |
| |
| #ifdef CONFIG_MCAST_TFTP |
| #include <malloc.h> |
| #define MTFTP_BITMAPSIZE 0x1000 |
| static unsigned *Bitmap; |
| static int PrevBitmapHole,Mapsize=MTFTP_BITMAPSIZE; |
| static uchar ProhibitMcast=0, MasterClient=0; |
| static uchar Multicast=0; |
| extern IPaddr_t Mcast_addr; |
| static int Mcast_port; |
| static ulong TftpEndingBlock; /* can get 'last' block before done..*/ |
| |
| static void parse_multicast_oack(char *pkt,int len); |
| |
| static void |
| mcast_cleanup(void) |
| { |
| if (Mcast_addr) eth_mcast_join(Mcast_addr, 0); |
| if (Bitmap) free(Bitmap); |
| Bitmap=NULL; |
| Mcast_addr = Multicast = Mcast_port = 0; |
| TftpEndingBlock = -1; |
| } |
| |
| #endif /* CONFIG_MCAST_TFTP */ |
| |
| static __inline__ void |
| store_block (unsigned block, uchar * src, unsigned len) |
| { |
| ulong offset = block * TftpBlkSize + TftpBlockWrapOffset; |
| ulong newsize = offset + len; |
| #ifdef CFG_DIRECT_FLASH_TFTP |
| int i, rc = 0; |
| |
| for (i=0; i<CFG_MAX_FLASH_BANKS; i++) { |
| /* start address in flash? */ |
| if (load_addr + offset >= flash_info[i].start[0]) { |
| rc = 1; |
| break; |
| } |
| } |
| |
| if (rc) { /* Flash is destination for this packet */ |
| rc = flash_write ((char *)src, (ulong)(load_addr+offset), len); |
| if (rc) { |
| flash_perror (rc); |
| NetState = NETLOOP_FAIL; |
| return; |
| } |
| } |
| else |
| #endif /* CFG_DIRECT_FLASH_TFTP */ |
| { |
| (void)memcpy((void *)(load_addr + offset), src, len); |
| } |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast) |
| ext2_set_bit(block, Bitmap); |
| #endif |
| |
| if (NetBootFileXferSize < newsize) |
| NetBootFileXferSize = newsize; |
| } |
| |
| static void TftpSend (void); |
| static void TftpTimeout (void); |
| |
| /**********************************************************************/ |
| |
| static void |
| TftpSend (void) |
| { |
| volatile uchar * pkt; |
| volatile uchar * xp; |
| int len = 0; |
| volatile ushort *s; |
| |
| #ifdef CONFIG_MCAST_TFTP |
| /* Multicast TFTP.. non-MasterClients do not ACK data. */ |
| if (Multicast |
| && (TftpState == STATE_DATA) |
| && (MasterClient == 0)) |
| return; |
| #endif |
| /* |
| * We will always be sending some sort of packet, so |
| * cobble together the packet headers now. |
| */ |
| pkt = NetTxPacket + NetEthHdrSize() + IP_HDR_SIZE; |
| |
| switch (TftpState) { |
| |
| case STATE_RRQ: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_RRQ); |
| pkt = (uchar *)s; |
| strcpy ((char *)pkt, tftp_filename); |
| pkt += strlen(tftp_filename) + 1; |
| strcpy ((char *)pkt, "octet"); |
| pkt += 5 /*strlen("octet")*/ + 1; |
| strcpy ((char *)pkt, "timeout"); |
| pkt += 7 /*strlen("timeout")*/ + 1; |
| sprintf((char *)pkt, "%d", TIMEOUT); |
| #ifdef ET_DEBUG |
| printf("send option \"timeout %s\"\n", (char *)pkt); |
| #endif |
| pkt += strlen((char *)pkt) + 1; |
| /* try for more effic. blk size */ |
| pkt += sprintf((char *)pkt,"blksize%c%d%c", |
| 0,htons(TftpBlkSizeOption),0); |
| #ifdef CONFIG_MCAST_TFTP |
| /* Check all preconditions before even trying the option */ |
| if (!ProhibitMcast |
| && (Bitmap=malloc(Mapsize)) |
| && eth_get_dev()->mcast) { |
| free(Bitmap); |
| Bitmap=NULL; |
| pkt += sprintf((char *)pkt,"multicast%c%c",0,0); |
| } |
| #endif /* CONFIG_MCAST_TFTP */ |
| len = pkt - xp; |
| break; |
| |
| case STATE_OACK: |
| #ifdef CONFIG_MCAST_TFTP |
| /* My turn! Start at where I need blocks I missed.*/ |
| if (Multicast) |
| TftpBlock=ext2_find_next_zero_bit(Bitmap,(Mapsize*8),0); |
| /*..falling..*/ |
| #endif |
| case STATE_DATA: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ACK); |
| *s++ = htons(TftpBlock); |
| pkt = (uchar *)s; |
| len = pkt - xp; |
| break; |
| |
| case STATE_TOO_LARGE: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ERROR); |
| *s++ = htons(3); |
| pkt = (uchar *)s; |
| strcpy ((char *)pkt, "File too large"); |
| pkt += 14 /*strlen("File too large")*/ + 1; |
| len = pkt - xp; |
| break; |
| |
| case STATE_BAD_MAGIC: |
| xp = pkt; |
| s = (ushort *)pkt; |
| *s++ = htons(TFTP_ERROR); |
| *s++ = htons(2); |
| pkt = (uchar *)s; |
| strcpy ((char *)pkt, "File has bad magic"); |
| pkt += 18 /*strlen("File has bad magic")*/ + 1; |
| len = pkt - xp; |
| break; |
| } |
| |
| NetSendUDPPacket(NetServerEther, NetServerIP, TftpServerPort, TftpOurPort, len); |
| } |
| |
| |
| static void |
| TftpHandler (uchar * pkt, unsigned dest, unsigned src, unsigned len) |
| { |
| ushort proto; |
| ushort *s; |
| int i; |
| |
| if (dest != TftpOurPort) { |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast |
| && (!Mcast_port || (dest != Mcast_port))) |
| #endif |
| return; |
| } |
| if (TftpState != STATE_RRQ && src != TftpServerPort) { |
| return; |
| } |
| |
| if (len < 2) { |
| return; |
| } |
| len -= 2; |
| /* warning: don't use increment (++) in ntohs() macros!! */ |
| s = (ushort *)pkt; |
| proto = *s++; |
| pkt = (uchar *)s; |
| switch (ntohs(proto)) { |
| |
| case TFTP_RRQ: |
| case TFTP_WRQ: |
| case TFTP_ACK: |
| break; |
| default: |
| break; |
| |
| case TFTP_OACK: |
| #ifdef ET_DEBUG |
| printf("Got OACK: %s %s\n", pkt, pkt+strlen(pkt)+1); |
| #endif |
| TftpState = STATE_OACK; |
| TftpServerPort = src; |
| /* Check for 'blksize' option */ |
| for (i=0;i<len-8;i++) { |
| if (strcmp ((char*)pkt+i,"blksize") == 0) { |
| TftpBlkSize = (unsigned short) |
| simple_strtoul((char*)pkt+i+8,NULL,10); |
| #ifdef ET_DEBUG |
| printf ("Blocksize ack: %s, %d\n", |
| (char*)pkt+i+8,TftpBlkSize); |
| #endif |
| break; |
| } |
| } |
| #ifdef CONFIG_MCAST_TFTP |
| parse_multicast_oack((char *)pkt,len-1); |
| if ((Multicast) && (!MasterClient)) |
| TftpState = STATE_DATA; /* passive.. */ |
| else |
| #endif |
| TftpSend (); /* Send ACK */ |
| break; |
| case TFTP_DATA: |
| if (len < 2) |
| return; |
| len -= 2; |
| TftpBlock = ntohs(*(ushort *)pkt); |
| |
| /* |
| * RFC1350 specifies that the first data packet will |
| * have sequence number 1. If we receive a sequence |
| * number of 0 this means that there was a wrap |
| * around of the (16 bit) counter. |
| */ |
| if (TftpBlock == 0) { |
| TftpBlockWrap++; |
| TftpBlockWrapOffset += TftpBlkSize * TFTP_SEQUENCE_SIZE; |
| printf ("\n\t %lu MB received\n\t ", TftpBlockWrapOffset>>20); |
| } else { |
| if (((TftpBlock - 1) % 10) == 0) { |
| putc ('#'); |
| } else if ((TftpBlock % (10 * HASHES_PER_LINE)) == 0) { |
| puts ("\n\t "); |
| } |
| } |
| |
| #ifdef ET_DEBUG |
| if (TftpState == STATE_RRQ) { |
| puts ("Server did not acknowledge timeout option!\n"); |
| } |
| #endif |
| |
| if (TftpState == STATE_RRQ || TftpState == STATE_OACK) { |
| /* first block received */ |
| TftpState = STATE_DATA; |
| TftpServerPort = src; |
| TftpLastBlock = 0; |
| TftpBlockWrap = 0; |
| TftpBlockWrapOffset = 0; |
| |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast) { /* start!=1 common if mcast */ |
| TftpLastBlock = TftpBlock - 1; |
| } else |
| #endif |
| if (TftpBlock != 1) { /* Assertion */ |
| printf ("\nTFTP error: " |
| "First block is not block 1 (%ld)\n" |
| "Starting again\n\n", |
| TftpBlock); |
| NetStartAgain (); |
| break; |
| } |
| } |
| |
| if (TftpBlock == TftpLastBlock) { |
| /* |
| * Same block again; ignore it. |
| */ |
| break; |
| } |
| |
| TftpLastBlock = TftpBlock; |
| NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout); |
| |
| store_block (TftpBlock - 1, pkt + 2, len); |
| |
| /* |
| * Acknoledge the block just received, which will prompt |
| * the server for the next one. |
| */ |
| #ifdef CONFIG_MCAST_TFTP |
| /* if I am the MasterClient, actively calculate what my next |
| * needed block is; else I'm passive; not ACKING |
| */ |
| if (Multicast) { |
| if (len < TftpBlkSize) { |
| TftpEndingBlock = TftpBlock; |
| } else if (MasterClient) { |
| TftpBlock = PrevBitmapHole = |
| ext2_find_next_zero_bit( |
| Bitmap, |
| (Mapsize*8), |
| PrevBitmapHole); |
| if (TftpBlock > ((Mapsize*8) - 1)) { |
| printf ("tftpfile too big\n"); |
| /* try to double it and retry */ |
| Mapsize<<=1; |
| mcast_cleanup(); |
| NetStartAgain (); |
| return; |
| } |
| TftpLastBlock = TftpBlock; |
| } |
| } |
| #endif |
| TftpSend (); |
| |
| #ifdef CONFIG_MCAST_TFTP |
| if (Multicast) { |
| if (MasterClient && (TftpBlock >= TftpEndingBlock)) { |
| puts ("\nMulticast tftp done\n"); |
| mcast_cleanup(); |
| NetState = NETLOOP_SUCCESS; |
| } |
| } |
| else |
| #endif |
| if (len < TftpBlkSize) { |
| /* |
| * We received the whole thing. Try to |
| * run it. |
| */ |
| puts ("\ndone\n"); |
| NetState = NETLOOP_SUCCESS; |
| } |
| break; |
| |
| case TFTP_ERROR: |
| printf ("\nTFTP error: '%s' (%d)\n", |
| pkt + 2, ntohs(*(ushort *)pkt)); |
| puts ("Starting again\n\n"); |
| #ifdef CONFIG_MCAST_TFTP |
| mcast_cleanup(); |
| #endif |
| NetStartAgain (); |
| break; |
| } |
| } |
| |
| |
| static void |
| TftpTimeout (void) |
| { |
| if (++TftpTimeoutCount > TIMEOUT_COUNT) { |
| puts ("\nRetry count exceeded; starting again\n"); |
| #ifdef CONFIG_MCAST_TFTP |
| mcast_cleanup(); |
| #endif |
| NetStartAgain (); |
| } else { |
| puts ("T "); |
| NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout); |
| TftpSend (); |
| } |
| } |
| |
| |
| void |
| TftpStart (void) |
| { |
| #ifdef CONFIG_TFTP_PORT |
| char *ep; /* Environment pointer */ |
| #endif |
| |
| if (BootFile[0] == '\0') { |
| sprintf(default_filename, "%02lX%02lX%02lX%02lX.img", |
| NetOurIP & 0xFF, |
| (NetOurIP >> 8) & 0xFF, |
| (NetOurIP >> 16) & 0xFF, |
| (NetOurIP >> 24) & 0xFF ); |
| tftp_filename = default_filename; |
| |
| printf ("*** Warning: no boot file name; using '%s'\n", |
| tftp_filename); |
| } else { |
| tftp_filename = BootFile; |
| } |
| |
| #if defined(CONFIG_NET_MULTI) |
| printf ("Using %s device\n", eth_get_name()); |
| #endif |
| puts ("TFTP from server "); print_IPaddr (NetServerIP); |
| puts ("; our IP address is "); print_IPaddr (NetOurIP); |
| |
| /* Check if we need to send across this subnet */ |
| if (NetOurGatewayIP && NetOurSubnetMask) { |
| IPaddr_t OurNet = NetOurIP & NetOurSubnetMask; |
| IPaddr_t ServerNet = NetServerIP & NetOurSubnetMask; |
| |
| if (OurNet != ServerNet) { |
| puts ("; sending through gateway "); |
| print_IPaddr (NetOurGatewayIP) ; |
| } |
| } |
| putc ('\n'); |
| |
| printf ("Filename '%s'.", tftp_filename); |
| |
| if (NetBootFileSize) { |
| printf (" Size is 0x%x Bytes = ", NetBootFileSize<<9); |
| print_size (NetBootFileSize<<9, ""); |
| } |
| |
| putc ('\n'); |
| |
| printf ("Load address: 0x%lx\n", load_addr); |
| |
| puts ("Loading: *\b"); |
| |
| NetSetTimeout (TIMEOUT * CFG_HZ, TftpTimeout); |
| NetSetHandler (TftpHandler); |
| |
| TftpServerPort = WELL_KNOWN_PORT; |
| TftpTimeoutCount = 0; |
| TftpState = STATE_RRQ; |
| /* Use a pseudo-random port unless a specific port is set */ |
| TftpOurPort = 1024 + (get_timer(0) % 3072); |
| |
| #ifdef CONFIG_TFTP_PORT |
| if ((ep = getenv("tftpdstp")) != NULL) { |
| TftpServerPort = simple_strtol(ep, NULL, 10); |
| } |
| if ((ep = getenv("tftpsrcp")) != NULL) { |
| TftpOurPort= simple_strtol(ep, NULL, 10); |
| } |
| #endif |
| TftpBlock = 0; |
| |
| /* zero out server ether in case the server ip has changed */ |
| memset(NetServerEther, 0, 6); |
| /* Revert TftpBlkSize to dflt */ |
| TftpBlkSize = TFTP_BLOCK_SIZE; |
| #ifdef CONFIG_MCAST_TFTP |
| mcast_cleanup(); |
| #endif |
| |
| TftpSend (); |
| } |
| |
| #ifdef CONFIG_MCAST_TFTP |
| /* Credits: atftp project. |
| */ |
| |
| /* pick up BcastAddr, Port, and whether I am [now] the master-client. * |
| * Frame: |
| * +-------+-----------+---+-------~~-------+---+ |
| * | opc | multicast | 0 | addr, port, mc | 0 | |
| * +-------+-----------+---+-------~~-------+---+ |
| * The multicast addr/port becomes what I listen to, and if 'mc' is '1' then |
| * I am the new master-client so must send ACKs to DataBlocks. If I am not |
| * master-client, I'm a passive client, gathering what DataBlocks I may and |
| * making note of which ones I got in my bitmask. |
| * In theory, I never go from master->passive.. |
| * .. this comes in with pkt already pointing just past opc |
| */ |
| static void parse_multicast_oack(char *pkt, int len) |
| { |
| int i; |
| IPaddr_t addr; |
| char *mc_adr, *port, *mc; |
| |
| mc_adr=port=mc=NULL; |
| /* march along looking for 'multicast\0', which has to start at least |
| * 14 bytes back from the end. |
| */ |
| for (i=0;i<len-14;i++) |
| if (strcmp (pkt+i,"multicast") == 0) |
| break; |
| if (i >= (len-14)) /* non-Multicast OACK, ign. */ |
| return; |
| |
| i+=10; /* strlen multicast */ |
| mc_adr = pkt+i; |
| for (;i<len;i++) { |
| if (*(pkt+i) == ',') { |
| *(pkt+i) = '\0'; |
| if (port) { |
| mc = pkt+i+1; |
| break; |
| } else { |
| port = pkt+i+1; |
| } |
| } |
| } |
| if (!port || !mc_adr || !mc ) return; |
| if (Multicast && MasterClient) { |
| printf ("I got a OACK as master Client, WRONG!\n"); |
| return; |
| } |
| /* ..I now accept packets destined for this MCAST addr, port */ |
| if (!Multicast) { |
| if (Bitmap) { |
| printf ("Internal failure! no mcast.\n"); |
| free(Bitmap); |
| Bitmap=NULL; |
| ProhibitMcast=1; |
| return ; |
| } |
| /* I malloc instead of pre-declare; so that if the file ends |
| * up being too big for this bitmap I can retry |
| */ |
| if (!(Bitmap = malloc (Mapsize))) { |
| printf ("No Bitmap, no multicast. Sorry.\n"); |
| ProhibitMcast=1; |
| return; |
| } |
| memset (Bitmap,0,Mapsize); |
| PrevBitmapHole = 0; |
| Multicast = 1; |
| } |
| addr = string_to_ip(mc_adr); |
| if (Mcast_addr != addr) { |
| if (Mcast_addr) |
| eth_mcast_join(Mcast_addr, 0); |
| if (eth_mcast_join(Mcast_addr=addr, 1)) { |
| printf ("Fail to set mcast, revert to TFTP\n"); |
| ProhibitMcast=1; |
| mcast_cleanup(); |
| NetStartAgain(); |
| } |
| } |
| MasterClient = (unsigned char)simple_strtoul((char *)mc,NULL,10); |
| Mcast_port = (unsigned short)simple_strtoul(port,NULL,10); |
| printf ("Multicast: %s:%d [%d]\n", mc_adr, Mcast_port, MasterClient); |
| return; |
| } |
| |
| #endif /* Multicast TFTP */ |
| |
| #endif |