| /* |
| * Opencore 10/100 ethernet mac driver |
| * |
| * Copyright (C) 2007-2008 Avionic Design Development GmbH |
| * Copyright (C) 2008-2009 Avionic Design GmbH |
| * Thierry Reding <thierry.reding@avionic-design.de> |
| * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw> |
| * |
| * This program is free software; you can redistribute it and/or modify |
| * it under the terms of the GNU General Public License version 2 as |
| * published by the Free Software Foundation. |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <malloc.h> |
| #include <net.h> |
| #include <miiphy.h> |
| #include <asm/io.h> |
| #include <asm/cache.h> |
| |
| /* register offsets */ |
| #define MODER 0x00 |
| #define INT_SOURCE 0x04 |
| #define INT_MASK 0x08 |
| #define IPGT 0x0c |
| #define IPGR1 0x10 |
| #define IPGR2 0x14 |
| #define PACKETLEN 0x18 |
| #define COLLCONF 0x1c |
| #define TX_BD_NUM 0x20 |
| #define CTRLMODER 0x24 |
| #define MIIMODER 0x28 |
| #define MIICOMMAND 0x2c |
| #define MIIADDRESS 0x30 |
| #define MIITX_DATA 0x34 |
| #define MIIRX_DATA 0x38 |
| #define MIISTATUS 0x3c |
| #define MAC_ADDR0 0x40 |
| #define MAC_ADDR1 0x44 |
| #define ETH_HASH0 0x48 |
| #define ETH_HASH1 0x4c |
| #define ETH_TXCTRL 0x50 |
| |
| /* mode register */ |
| #define MODER_RXEN (1 << 0) /* receive enable */ |
| #define MODER_TXEN (1 << 1) /* transmit enable */ |
| #define MODER_NOPRE (1 << 2) /* no preamble */ |
| #define MODER_BRO (1 << 3) /* broadcast address */ |
| #define MODER_IAM (1 << 4) /* individual address mode */ |
| #define MODER_PRO (1 << 5) /* promiscuous mode */ |
| #define MODER_IFG (1 << 6) /* interframe gap for incoming frames */ |
| #define MODER_LOOP (1 << 7) /* loopback */ |
| #define MODER_NBO (1 << 8) /* no back-off */ |
| #define MODER_EDE (1 << 9) /* excess defer enable */ |
| #define MODER_FULLD (1 << 10) /* full duplex */ |
| #define MODER_RESET (1 << 11) /* FIXME: reset (undocumented) */ |
| #define MODER_DCRC (1 << 12) /* delayed CRC enable */ |
| #define MODER_CRC (1 << 13) /* CRC enable */ |
| #define MODER_HUGE (1 << 14) /* huge packets enable */ |
| #define MODER_PAD (1 << 15) /* padding enabled */ |
| #define MODER_RSM (1 << 16) /* receive small packets */ |
| |
| /* interrupt source and mask registers */ |
| #define INT_MASK_TXF (1 << 0) /* transmit frame */ |
| #define INT_MASK_TXE (1 << 1) /* transmit error */ |
| #define INT_MASK_RXF (1 << 2) /* receive frame */ |
| #define INT_MASK_RXE (1 << 3) /* receive error */ |
| #define INT_MASK_BUSY (1 << 4) |
| #define INT_MASK_TXC (1 << 5) /* transmit control frame */ |
| #define INT_MASK_RXC (1 << 6) /* receive control frame */ |
| |
| #define INT_MASK_TX (INT_MASK_TXF | INT_MASK_TXE) |
| #define INT_MASK_RX (INT_MASK_RXF | INT_MASK_RXE) |
| |
| #define INT_MASK_ALL ( \ |
| INT_MASK_TXF | INT_MASK_TXE | \ |
| INT_MASK_RXF | INT_MASK_RXE | \ |
| INT_MASK_TXC | INT_MASK_RXC | \ |
| INT_MASK_BUSY \ |
| ) |
| |
| /* packet length register */ |
| #define PACKETLEN_MIN(min) (((min) & 0xffff) << 16) |
| #define PACKETLEN_MAX(max) (((max) & 0xffff) << 0) |
| #define PACKETLEN_MIN_MAX(min, max) (PACKETLEN_MIN(min) | \ |
| PACKETLEN_MAX(max)) |
| |
| /* transmit buffer number register */ |
| #define TX_BD_NUM_VAL(x) (((x) <= 0x80) ? (x) : 0x80) |
| |
| /* control module mode register */ |
| #define CTRLMODER_PASSALL (1 << 0) /* pass all receive frames */ |
| #define CTRLMODER_RXFLOW (1 << 1) /* receive control flow */ |
| #define CTRLMODER_TXFLOW (1 << 2) /* transmit control flow */ |
| |
| /* MII mode register */ |
| #define MIIMODER_CLKDIV(x) ((x) & 0xfe) /* needs to be an even number */ |
| #define MIIMODER_NOPRE (1 << 8) /* no preamble */ |
| |
| /* MII command register */ |
| #define MIICOMMAND_SCAN (1 << 0) /* scan status */ |
| #define MIICOMMAND_READ (1 << 1) /* read status */ |
| #define MIICOMMAND_WRITE (1 << 2) /* write control data */ |
| |
| /* MII address register */ |
| #define MIIADDRESS_FIAD(x) (((x) & 0x1f) << 0) |
| #define MIIADDRESS_RGAD(x) (((x) & 0x1f) << 8) |
| #define MIIADDRESS_ADDR(phy, reg) (MIIADDRESS_FIAD(phy) | \ |
| MIIADDRESS_RGAD(reg)) |
| |
| /* MII transmit data register */ |
| #define MIITX_DATA_VAL(x) ((x) & 0xffff) |
| |
| /* MII receive data register */ |
| #define MIIRX_DATA_VAL(x) ((x) & 0xffff) |
| |
| /* MII status register */ |
| #define MIISTATUS_LINKFAIL (1 << 0) |
| #define MIISTATUS_BUSY (1 << 1) |
| #define MIISTATUS_INVALID (1 << 2) |
| |
| /* TX buffer descriptor */ |
| #define TX_BD_CS (1 << 0) /* carrier sense lost */ |
| #define TX_BD_DF (1 << 1) /* defer indication */ |
| #define TX_BD_LC (1 << 2) /* late collision */ |
| #define TX_BD_RL (1 << 3) /* retransmission limit */ |
| #define TX_BD_RETRY_MASK (0x00f0) |
| #define TX_BD_RETRY(x) (((x) & 0x00f0) >> 4) |
| #define TX_BD_UR (1 << 8) /* transmitter underrun */ |
| #define TX_BD_CRC (1 << 11) /* TX CRC enable */ |
| #define TX_BD_PAD (1 << 12) /* pad enable */ |
| #define TX_BD_WRAP (1 << 13) |
| #define TX_BD_IRQ (1 << 14) /* interrupt request enable */ |
| #define TX_BD_READY (1 << 15) /* TX buffer ready */ |
| #define TX_BD_LEN(x) (((x) & 0xffff) << 16) |
| #define TX_BD_LEN_MASK (0xffff << 16) |
| |
| #define TX_BD_STATS (TX_BD_CS | TX_BD_DF | TX_BD_LC | \ |
| TX_BD_RL | TX_BD_RETRY_MASK | TX_BD_UR) |
| |
| /* RX buffer descriptor */ |
| #define RX_BD_LC (1 << 0) /* late collision */ |
| #define RX_BD_CRC (1 << 1) /* RX CRC error */ |
| #define RX_BD_SF (1 << 2) /* short frame */ |
| #define RX_BD_TL (1 << 3) /* too long */ |
| #define RX_BD_DN (1 << 4) /* dribble nibble */ |
| #define RX_BD_IS (1 << 5) /* invalid symbol */ |
| #define RX_BD_OR (1 << 6) /* receiver overrun */ |
| #define RX_BD_MISS (1 << 7) |
| #define RX_BD_CF (1 << 8) /* control frame */ |
| #define RX_BD_WRAP (1 << 13) |
| #define RX_BD_IRQ (1 << 14) /* interrupt request enable */ |
| #define RX_BD_EMPTY (1 << 15) |
| #define RX_BD_LEN(x) (((x) & 0xffff) << 16) |
| |
| #define RX_BD_STATS (RX_BD_LC | RX_BD_CRC | RX_BD_SF | RX_BD_TL | \ |
| RX_BD_DN | RX_BD_IS | RX_BD_OR | RX_BD_MISS) |
| |
| #define ETHOC_BUFSIZ 1536 |
| #define ETHOC_ZLEN 64 |
| #define ETHOC_BD_BASE 0x400 |
| #define ETHOC_TIMEOUT (HZ / 2) |
| #define ETHOC_MII_TIMEOUT (1 + (HZ / 5)) |
| |
| /** |
| * struct ethoc - driver-private device structure |
| * @num_tx: number of send buffers |
| * @cur_tx: last send buffer written |
| * @dty_tx: last buffer actually sent |
| * @num_rx: number of receive buffers |
| * @cur_rx: current receive buffer |
| */ |
| struct ethoc { |
| u32 num_tx; |
| u32 cur_tx; |
| u32 dty_tx; |
| u32 num_rx; |
| u32 cur_rx; |
| }; |
| |
| /** |
| * struct ethoc_bd - buffer descriptor |
| * @stat: buffer statistics |
| * @addr: physical memory address |
| */ |
| struct ethoc_bd { |
| u32 stat; |
| u32 addr; |
| }; |
| |
| static inline u32 ethoc_read(struct eth_device *dev, loff_t offset) |
| { |
| return readl(dev->iobase + offset); |
| } |
| |
| static inline void ethoc_write(struct eth_device *dev, loff_t offset, u32 data) |
| { |
| writel(data, dev->iobase + offset); |
| } |
| |
| static inline void ethoc_read_bd(struct eth_device *dev, int index, |
| struct ethoc_bd *bd) |
| { |
| loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); |
| bd->stat = ethoc_read(dev, offset + 0); |
| bd->addr = ethoc_read(dev, offset + 4); |
| } |
| |
| static inline void ethoc_write_bd(struct eth_device *dev, int index, |
| const struct ethoc_bd *bd) |
| { |
| loff_t offset = ETHOC_BD_BASE + (index * sizeof(struct ethoc_bd)); |
| ethoc_write(dev, offset + 0, bd->stat); |
| ethoc_write(dev, offset + 4, bd->addr); |
| } |
| |
| static inline void ethoc_set_mac_address(struct eth_device *dev) |
| { |
| u8 *mac = dev->enetaddr; |
| |
| ethoc_write(dev, MAC_ADDR0, (mac[2] << 24) | (mac[3] << 16) | |
| (mac[4] << 8) | (mac[5] << 0)); |
| ethoc_write(dev, MAC_ADDR1, (mac[0] << 8) | (mac[1] << 0)); |
| } |
| |
| static inline void ethoc_ack_irq(struct eth_device *dev, u32 mask) |
| { |
| ethoc_write(dev, INT_SOURCE, mask); |
| } |
| |
| static inline void ethoc_enable_rx_and_tx(struct eth_device *dev) |
| { |
| u32 mode = ethoc_read(dev, MODER); |
| mode |= MODER_RXEN | MODER_TXEN; |
| ethoc_write(dev, MODER, mode); |
| } |
| |
| static inline void ethoc_disable_rx_and_tx(struct eth_device *dev) |
| { |
| u32 mode = ethoc_read(dev, MODER); |
| mode &= ~(MODER_RXEN | MODER_TXEN); |
| ethoc_write(dev, MODER, mode); |
| } |
| |
| static int ethoc_init_ring(struct eth_device *dev) |
| { |
| struct ethoc *priv = (struct ethoc *)dev->priv; |
| struct ethoc_bd bd; |
| int i; |
| |
| priv->cur_tx = 0; |
| priv->dty_tx = 0; |
| priv->cur_rx = 0; |
| |
| /* setup transmission buffers */ |
| bd.stat = TX_BD_IRQ | TX_BD_CRC; |
| |
| for (i = 0; i < priv->num_tx; i++) { |
| if (i == priv->num_tx - 1) |
| bd.stat |= TX_BD_WRAP; |
| |
| ethoc_write_bd(dev, i, &bd); |
| } |
| |
| bd.stat = RX_BD_EMPTY | RX_BD_IRQ; |
| |
| for (i = 0; i < priv->num_rx; i++) { |
| bd.addr = (u32)NetRxPackets[i]; |
| if (i == priv->num_rx - 1) |
| bd.stat |= RX_BD_WRAP; |
| |
| flush_dcache(bd.addr, PKTSIZE_ALIGN); |
| ethoc_write_bd(dev, priv->num_tx + i, &bd); |
| } |
| |
| return 0; |
| } |
| |
| static int ethoc_reset(struct eth_device *dev) |
| { |
| u32 mode; |
| |
| /* TODO: reset controller? */ |
| |
| ethoc_disable_rx_and_tx(dev); |
| |
| /* TODO: setup registers */ |
| |
| /* enable FCS generation and automatic padding */ |
| mode = ethoc_read(dev, MODER); |
| mode |= MODER_CRC | MODER_PAD; |
| ethoc_write(dev, MODER, mode); |
| |
| /* set full-duplex mode */ |
| mode = ethoc_read(dev, MODER); |
| mode |= MODER_FULLD; |
| ethoc_write(dev, MODER, mode); |
| ethoc_write(dev, IPGT, 0x15); |
| |
| ethoc_ack_irq(dev, INT_MASK_ALL); |
| ethoc_enable_rx_and_tx(dev); |
| return 0; |
| } |
| |
| static int ethoc_init(struct eth_device *dev, bd_t * bd) |
| { |
| struct ethoc *priv = (struct ethoc *)dev->priv; |
| printf("ethoc\n"); |
| |
| ethoc_set_mac_address(dev); |
| |
| priv->num_tx = 1; |
| priv->num_rx = PKTBUFSRX; |
| ethoc_write(dev, TX_BD_NUM, priv->num_tx); |
| ethoc_init_ring(dev); |
| ethoc_reset(dev); |
| |
| return 0; |
| } |
| |
| static int ethoc_update_rx_stats(struct ethoc_bd *bd) |
| { |
| int ret = 0; |
| |
| if (bd->stat & RX_BD_TL) { |
| debug("ETHOC: " "RX: frame too long\n"); |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_SF) { |
| debug("ETHOC: " "RX: frame too short\n"); |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_DN) |
| debug("ETHOC: " "RX: dribble nibble\n"); |
| |
| if (bd->stat & RX_BD_CRC) { |
| debug("ETHOC: " "RX: wrong CRC\n"); |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_OR) { |
| debug("ETHOC: " "RX: overrun\n"); |
| ret++; |
| } |
| |
| if (bd->stat & RX_BD_LC) { |
| debug("ETHOC: " "RX: late collision\n"); |
| ret++; |
| } |
| |
| return ret; |
| } |
| |
| static int ethoc_rx(struct eth_device *dev, int limit) |
| { |
| struct ethoc *priv = (struct ethoc *)dev->priv; |
| int count; |
| |
| for (count = 0; count < limit; ++count) { |
| u32 entry; |
| struct ethoc_bd bd; |
| |
| entry = priv->num_tx + (priv->cur_rx % priv->num_rx); |
| ethoc_read_bd(dev, entry, &bd); |
| if (bd.stat & RX_BD_EMPTY) |
| break; |
| |
| debug("%s(): RX buffer %d, %x received\n", |
| __func__, priv->cur_rx, bd.stat); |
| if (ethoc_update_rx_stats(&bd) == 0) { |
| int size = bd.stat >> 16; |
| size -= 4; /* strip the CRC */ |
| NetReceive((void *)bd.addr, size); |
| } |
| |
| /* clear the buffer descriptor so it can be reused */ |
| flush_dcache(bd.addr, PKTSIZE_ALIGN); |
| bd.stat &= ~RX_BD_STATS; |
| bd.stat |= RX_BD_EMPTY; |
| ethoc_write_bd(dev, entry, &bd); |
| priv->cur_rx++; |
| } |
| |
| return count; |
| } |
| |
| static int ethoc_update_tx_stats(struct ethoc_bd *bd) |
| { |
| if (bd->stat & TX_BD_LC) |
| debug("ETHOC: " "TX: late collision\n"); |
| |
| if (bd->stat & TX_BD_RL) |
| debug("ETHOC: " "TX: retransmit limit\n"); |
| |
| if (bd->stat & TX_BD_UR) |
| debug("ETHOC: " "TX: underrun\n"); |
| |
| if (bd->stat & TX_BD_CS) |
| debug("ETHOC: " "TX: carrier sense lost\n"); |
| |
| return 0; |
| } |
| |
| static void ethoc_tx(struct eth_device *dev) |
| { |
| struct ethoc *priv = (struct ethoc *)dev->priv; |
| u32 entry = priv->dty_tx % priv->num_tx; |
| struct ethoc_bd bd; |
| |
| ethoc_read_bd(dev, entry, &bd); |
| if ((bd.stat & TX_BD_READY) == 0) |
| (void)ethoc_update_tx_stats(&bd); |
| } |
| |
| static int ethoc_send(struct eth_device *dev, volatile void *packet, int length) |
| { |
| struct ethoc *priv = (struct ethoc *)dev->priv; |
| struct ethoc_bd bd; |
| u32 entry; |
| u32 pending; |
| int tmo; |
| |
| entry = priv->cur_tx % priv->num_tx; |
| ethoc_read_bd(dev, entry, &bd); |
| if (unlikely(length < ETHOC_ZLEN)) |
| bd.stat |= TX_BD_PAD; |
| else |
| bd.stat &= ~TX_BD_PAD; |
| bd.addr = (u32)packet; |
| |
| flush_dcache(bd.addr, length); |
| bd.stat &= ~(TX_BD_STATS | TX_BD_LEN_MASK); |
| bd.stat |= TX_BD_LEN(length); |
| ethoc_write_bd(dev, entry, &bd); |
| |
| /* start transmit */ |
| bd.stat |= TX_BD_READY; |
| ethoc_write_bd(dev, entry, &bd); |
| |
| /* wait for transfer to succeed */ |
| tmo = get_timer(0) + 5 * CONFIG_SYS_HZ; |
| while (1) { |
| pending = ethoc_read(dev, INT_SOURCE); |
| ethoc_ack_irq(dev, pending & ~INT_MASK_RX); |
| if (pending & INT_MASK_BUSY) |
| debug("%s(): packet dropped\n", __func__); |
| |
| if (pending & INT_MASK_TX) { |
| ethoc_tx(dev); |
| break; |
| } |
| if (get_timer(0) >= tmo) { |
| debug("%s(): timed out\n", __func__); |
| return -1; |
| } |
| } |
| |
| debug("%s(): packet sent\n", __func__); |
| return 0; |
| } |
| |
| static void ethoc_halt(struct eth_device *dev) |
| { |
| ethoc_disable_rx_and_tx(dev); |
| } |
| |
| static int ethoc_recv(struct eth_device *dev) |
| { |
| u32 pending; |
| |
| pending = ethoc_read(dev, INT_SOURCE); |
| ethoc_ack_irq(dev, pending); |
| if (pending & INT_MASK_BUSY) |
| debug("%s(): packet dropped\n", __func__); |
| if (pending & INT_MASK_RX) { |
| debug("%s(): rx irq\n", __func__); |
| ethoc_rx(dev, PKTBUFSRX); |
| } |
| |
| return 0; |
| } |
| |
| int ethoc_initialize(u8 dev_num, int base_addr) |
| { |
| struct ethoc *priv; |
| struct eth_device *dev; |
| |
| priv = malloc(sizeof(*priv)); |
| if (!priv) |
| return 0; |
| dev = malloc(sizeof(*dev)); |
| if (!dev) { |
| free(priv); |
| return 0; |
| } |
| |
| memset(dev, 0, sizeof(*dev)); |
| dev->priv = priv; |
| dev->iobase = base_addr; |
| dev->init = ethoc_init; |
| dev->halt = ethoc_halt; |
| dev->send = ethoc_send; |
| dev->recv = ethoc_recv; |
| sprintf(dev->name, "%s-%hu", "ETHOC", dev_num); |
| |
| eth_register(dev); |
| return 1; |
| } |