| /* |
| * (C) Copyright 2010 |
| * Marvell Semiconductor <www.marvell.com> |
| * Written-by: Prafulla Wadaskar <prafulla@marvell.com> |
| * Contributor: Mahavir Jain <mjain@marvell.com> |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, |
| * MA 02110-1301 USA |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/armada100.h> |
| |
| /* |
| * Timer registers |
| * Refer Section A.6 in Datasheet |
| */ |
| struct armd1tmr_registers { |
| u32 clk_ctrl; /* Timer clk control reg */ |
| u32 match[9]; /* Timer match registers */ |
| u32 count[3]; /* Timer count registers */ |
| u32 status[3]; |
| u32 ie[3]; |
| u32 preload[3]; /* Timer preload value */ |
| u32 preload_ctrl[3]; |
| u32 wdt_match_en; |
| u32 wdt_match_r; |
| u32 wdt_val; |
| u32 wdt_sts; |
| u32 icr[3]; |
| u32 wdt_icr; |
| u32 cer; /* Timer count enable reg */ |
| u32 cmr; |
| u32 ilr[3]; |
| u32 wcr; |
| u32 wfar; |
| u32 wsar; |
| u32 cvwr; |
| }; |
| |
| #define TIMER 0 /* Use TIMER 0 */ |
| /* Each timer has 3 match registers */ |
| #define MATCH_CMP(x) ((3 * TIMER) + x) |
| #define TIMER_LOAD_VAL 0xffffffff |
| #define COUNT_RD_REQ 0x1 |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| /* Using gd->tbu from timestamp and gd->tbl for lastdec */ |
| |
| /* For preventing risk of instability in reading counter value, |
| * first set read request to register cvwr and then read same |
| * register after it captures counter value. |
| */ |
| ulong read_timer(void) |
| { |
| struct armd1tmr_registers *armd1timers = |
| (struct armd1tmr_registers *) ARMD1_TIMER_BASE; |
| volatile int loop=100; |
| |
| writel(COUNT_RD_REQ, &armd1timers->cvwr); |
| while (loop--); |
| return(readl(&armd1timers->cvwr)); |
| } |
| |
| ulong get_timer_masked(void) |
| { |
| ulong now = read_timer(); |
| |
| if (now >= gd->tbl) { |
| /* normal mode */ |
| gd->tbu += now - gd->tbl; |
| } else { |
| /* we have an overflow ... */ |
| gd->tbu += now + TIMER_LOAD_VAL - gd->tbl; |
| } |
| gd->tbl = now; |
| |
| return gd->tbu; |
| } |
| |
| ulong get_timer(ulong base) |
| { |
| return ((get_timer_masked() / (CONFIG_SYS_HZ_CLOCK / 1000)) - |
| base); |
| } |
| |
| void __udelay(unsigned long usec) |
| { |
| ulong delayticks; |
| ulong endtime; |
| |
| delayticks = (usec * (CONFIG_SYS_HZ_CLOCK / 1000000)); |
| endtime = get_timer_masked() + delayticks; |
| |
| while (get_timer_masked() < endtime); |
| } |
| |
| /* |
| * init the Timer |
| */ |
| int timer_init(void) |
| { |
| struct armd1apb1_registers *apb1clkres = |
| (struct armd1apb1_registers *) ARMD1_APBC1_BASE; |
| struct armd1tmr_registers *armd1timers = |
| (struct armd1tmr_registers *) ARMD1_TIMER_BASE; |
| |
| /* Enable Timer clock at 3.25 MHZ */ |
| writel(APBC_APBCLK | APBC_FNCLK | APBC_FNCLKSEL(3), &apb1clkres->timers); |
| |
| /* load value into timer */ |
| writel(0x0, &armd1timers->clk_ctrl); |
| /* Use Timer 0 Match Resiger 0 */ |
| writel(TIMER_LOAD_VAL, &armd1timers->match[MATCH_CMP(0)]); |
| /* Preload value is 0 */ |
| writel(0x0, &armd1timers->preload[TIMER]); |
| /* Enable match comparator 0 for Timer 0 */ |
| writel(0x1, &armd1timers->preload_ctrl[TIMER]); |
| |
| /* Enable timer 0 */ |
| writel(0x1, &armd1timers->cer); |
| /* init the gd->tbu and gd->tbl value */ |
| gd->tbl = read_timer(); |
| gd->tbu = 0; |
| |
| return 0; |
| } |
| |
| #define MPMU_APRR_WDTR (1<<4) |
| #define TMR_WFAR 0xbaba /* WDT Register First key */ |
| #define TMP_WSAR 0xeb10 /* WDT Register Second key */ |
| |
| /* |
| * This function uses internal Watchdog Timer |
| * based reset mechanism. |
| * Steps to write watchdog registers (protected access) |
| * 1. Write key value to TMR_WFAR reg. |
| * 2. Write key value to TMP_WSAR reg. |
| * 3. Perform write operation. |
| */ |
| void reset_cpu (unsigned long ignored) |
| { |
| struct armd1mpmu_registers *mpmu = |
| (struct armd1mpmu_registers *) ARMD1_MPMU_BASE; |
| struct armd1tmr_registers *armd1timers = |
| (struct armd1tmr_registers *) ARMD1_TIMER_BASE; |
| u32 val; |
| |
| /* negate hardware reset to the WDT after system reset */ |
| val = readl(&mpmu->aprr); |
| val = val | MPMU_APRR_WDTR; |
| writel(val, &mpmu->aprr); |
| |
| /* reset/enable WDT clock */ |
| writel(APBC_APBCLK | APBC_FNCLK | APBC_RST, &mpmu->wdtpcr); |
| readl(&mpmu->wdtpcr); |
| writel(APBC_APBCLK | APBC_FNCLK, &mpmu->wdtpcr); |
| readl(&mpmu->wdtpcr); |
| |
| /* clear previous WDT status */ |
| writel(TMR_WFAR, &armd1timers->wfar); |
| writel(TMP_WSAR, &armd1timers->wsar); |
| writel(0, &armd1timers->wdt_sts); |
| |
| /* set match counter */ |
| writel(TMR_WFAR, &armd1timers->wfar); |
| writel(TMP_WSAR, &armd1timers->wsar); |
| writel(0xf, &armd1timers->wdt_match_r); |
| |
| /* enable WDT reset */ |
| writel(TMR_WFAR, &armd1timers->wfar); |
| writel(TMP_WSAR, &armd1timers->wsar); |
| writel(0x3, &armd1timers->wdt_match_en); |
| |
| while(1); |
| } |