| # |
| # Video configuration |
| # |
| |
| menu "Graphics support" |
| |
| config DM_VIDEO |
| bool "Enable driver model support for LCD/video" |
| depends on DM |
| help |
| This enables driver model for LCD and video devices. These support |
| a bitmap display of various sizes and depths which can be drawn on |
| to display a command-line console or splash screen. Enabling this |
| option compiles in the video uclass and routes all LCD/video access |
| through this. |
| |
| config VIDEO_BPP8 |
| bool "Support 8-bit-per-pixel displays" |
| depends on DM_VIDEO |
| default y if DM_VIDEO |
| help |
| Support drawing text and bitmaps onto a 8-bit-per-pixel display. |
| Enabling this will include code to support this display. Without |
| this option, such displays will not be supported and console output |
| will be empty. |
| |
| config VIDEO_BPP16 |
| bool "Support 16-bit-per-pixel displays" |
| depends on DM_VIDEO |
| default y if DM_VIDEO |
| help |
| Support drawing text and bitmaps onto a 16-bit-per-pixel display. |
| Enabling this will include code to support this display. Without |
| this option, such displays will not be supported and console output |
| will be empty. |
| |
| config VIDEO_BPP32 |
| bool "Support 32-bit-per-pixel displays" |
| depends on DM_VIDEO |
| default y if DM_VIDEO |
| help |
| Support drawing text and bitmaps onto a 32-bit-per-pixel display. |
| Enabling this will include code to support this display. Without |
| this option, such displays will not be supported and console output |
| will be empty. |
| |
| config VIDEO_ROTATION |
| bool "Support rotated displays" |
| depends on DM_VIDEO |
| help |
| Sometimes, for example if the display is mounted in portrait |
| mode or even if it's mounted landscape but rotated by 180degree, |
| we need to rotate our content of the display relative to the |
| framebuffer, so that user can read the messages which are |
| printed out. Enable this option to include a text driver which can |
| support this. The rotation is set by the 'rot' parameter in |
| struct video_priv: 0=unrotated, 1=90 degrees clockwise, 2=180 |
| degrees, 3=270 degrees. |
| |
| config VIDEO_VESA |
| bool "Enable VESA video driver support" |
| default n |
| help |
| Turn on this option to enable a very simple driver which uses vesa |
| to discover the video mode and then provides a frame buffer for use |
| by U-Boot. This can in principle be used with any platform that |
| supports PCI and video cards that support VESA BIOS Extension (VBE). |
| |
| config FRAMEBUFFER_SET_VESA_MODE |
| bool "Set framebuffer graphics resolution" |
| depends on VIDEO_VESA |
| help |
| Set VESA/native framebuffer mode (needed for bootsplash and graphical |
| framebuffer console) |
| |
| choice |
| prompt "framebuffer graphics resolution" |
| default FRAMEBUFFER_VESA_MODE_117 |
| depends on FRAMEBUFFER_SET_VESA_MODE |
| help |
| This option sets the resolution used for the U-Boot framebuffer (and |
| bootsplash screen). |
| |
| config FRAMEBUFFER_VESA_MODE_100 |
| bool "640x400 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_101 |
| bool "640x480 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_102 |
| bool "800x600 16-color" |
| |
| config FRAMEBUFFER_VESA_MODE_103 |
| bool "800x600 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_104 |
| bool "1024x768 16-color" |
| |
| config FRAMEBUFFER_VESA_MODE_105 |
| bool "1024x768 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_106 |
| bool "1280x1024 16-color" |
| |
| config FRAMEBUFFER_VESA_MODE_107 |
| bool "1280x1024 256-color" |
| |
| config FRAMEBUFFER_VESA_MODE_108 |
| bool "80x60 text" |
| |
| config FRAMEBUFFER_VESA_MODE_109 |
| bool "132x25 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10A |
| bool "132x43 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10B |
| bool "132x50 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10C |
| bool "132x60 text" |
| |
| config FRAMEBUFFER_VESA_MODE_10D |
| bool "320x200 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_10E |
| bool "320x200 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_10F |
| bool "320x200 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_110 |
| bool "640x480 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_111 |
| bool "640x480 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_112 |
| bool "640x480 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_113 |
| bool "800x600 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_114 |
| bool "800x600 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_115 |
| bool "800x600 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_116 |
| bool "1024x768 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_117 |
| bool "1024x768 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_118 |
| bool "1024x768 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_119 |
| bool "1280x1024 32k-color (1:5:5:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_11A |
| bool "1280x1024 64k-color (5:6:5)" |
| |
| config FRAMEBUFFER_VESA_MODE_11B |
| bool "1280x1024 16.8M-color (8:8:8)" |
| |
| config FRAMEBUFFER_VESA_MODE_USER |
| bool "Manually select VESA mode" |
| |
| endchoice |
| |
| # Map the config names to an integer (KB). |
| config FRAMEBUFFER_VESA_MODE |
| prompt "VESA mode" if FRAMEBUFFER_VESA_MODE_USER |
| hex |
| default 0x100 if FRAMEBUFFER_VESA_MODE_100 |
| default 0x101 if FRAMEBUFFER_VESA_MODE_101 |
| default 0x102 if FRAMEBUFFER_VESA_MODE_102 |
| default 0x103 if FRAMEBUFFER_VESA_MODE_103 |
| default 0x104 if FRAMEBUFFER_VESA_MODE_104 |
| default 0x105 if FRAMEBUFFER_VESA_MODE_105 |
| default 0x106 if FRAMEBUFFER_VESA_MODE_106 |
| default 0x107 if FRAMEBUFFER_VESA_MODE_107 |
| default 0x108 if FRAMEBUFFER_VESA_MODE_108 |
| default 0x109 if FRAMEBUFFER_VESA_MODE_109 |
| default 0x10A if FRAMEBUFFER_VESA_MODE_10A |
| default 0x10B if FRAMEBUFFER_VESA_MODE_10B |
| default 0x10C if FRAMEBUFFER_VESA_MODE_10C |
| default 0x10D if FRAMEBUFFER_VESA_MODE_10D |
| default 0x10E if FRAMEBUFFER_VESA_MODE_10E |
| default 0x10F if FRAMEBUFFER_VESA_MODE_10F |
| default 0x110 if FRAMEBUFFER_VESA_MODE_110 |
| default 0x111 if FRAMEBUFFER_VESA_MODE_111 |
| default 0x112 if FRAMEBUFFER_VESA_MODE_112 |
| default 0x113 if FRAMEBUFFER_VESA_MODE_113 |
| default 0x114 if FRAMEBUFFER_VESA_MODE_114 |
| default 0x115 if FRAMEBUFFER_VESA_MODE_115 |
| default 0x116 if FRAMEBUFFER_VESA_MODE_116 |
| default 0x117 if FRAMEBUFFER_VESA_MODE_117 |
| default 0x118 if FRAMEBUFFER_VESA_MODE_118 |
| default 0x119 if FRAMEBUFFER_VESA_MODE_119 |
| default 0x11A if FRAMEBUFFER_VESA_MODE_11A |
| default 0x11B if FRAMEBUFFER_VESA_MODE_11B |
| default 0x117 if FRAMEBUFFER_VESA_MODE_USER |
| |
| config VIDEO_LCD_ANX9804 |
| bool "ANX9804 bridge chip" |
| default n |
| ---help--- |
| Support for the ANX9804 bridge chip, which can take pixel data coming |
| from a parallel LCD interface and translate it on the fy into a DP |
| interface for driving eDP TFT displays. It uses I2C for configuration. |
| |
| config VIDEO_LCD_SSD2828 |
| bool "SSD2828 bridge chip" |
| default n |
| ---help--- |
| Support for the SSD2828 bridge chip, which can take pixel data coming |
| from a parallel LCD interface and translate it on the fly into MIPI DSI |
| interface for driving a MIPI compatible LCD panel. It uses SPI for |
| configuration. |
| |
| config VIDEO_LCD_SSD2828_TX_CLK |
| int "SSD2828 TX_CLK frequency (in MHz)" |
| depends on VIDEO_LCD_SSD2828 |
| default 0 |
| ---help--- |
| The frequency of the crystal, which is clocking SSD2828. It may be |
| anything in the 8MHz-30MHz range and the exact value should be |
| retrieved from the board schematics. Or in the case of Allwinner |
| hardware, it can be usually found as 'lcd_xtal_freq' variable in |
| FEX files. It can be also set to 0 for selecting PCLK from the |
| parallel LCD interface instead of TX_CLK as the PLL clock source. |
| |
| config VIDEO_LCD_SSD2828_RESET |
| string "RESET pin of SSD2828" |
| depends on VIDEO_LCD_SSD2828 |
| default "" |
| ---help--- |
| The reset pin of SSD2828 chip. This takes a string in the format |
| understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_HITACHI_TX18D42VM |
| bool "Hitachi tx18d42vm LVDS LCD panel support" |
| depends on VIDEO |
| default n |
| ---help--- |
| Support for Hitachi tx18d42vm LVDS LCD panels, these panels have a |
| lcd controller which needs to be initialized over SPI, once that is |
| done they work like a regular LVDS panel. |
| |
| config VIDEO_LCD_SPI_CS |
| string "SPI CS pin for LCD related config job" |
| depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. The option takes a string in the format |
| understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_SPI_SCLK |
| string "SPI SCLK pin for LCD related config job" |
| depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. The option takes a string in the format |
| understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_SPI_MOSI |
| string "SPI MOSI pin for LCD related config job" |
| depends on VIDEO_LCD_SSD2828 || VIDEO_LCD_HITACHI_TX18D42VM |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. The option takes a string in the format |
| understood by 'name_to_gpio' function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_LCD_SPI_MISO |
| string "SPI MISO pin for LCD related config job (optional)" |
| depends on VIDEO_LCD_SSD2828 |
| default "" |
| ---help--- |
| This is one of the SPI communication pins, involved in setting up a |
| working LCD configuration. The exact role of SPI may differ for |
| different hardware setups. If wired up, this pin may provide additional |
| useful functionality. Such as bi-directional communication with the |
| hardware and LCD panel id retrieval (if the panel can report it). The |
| option takes a string in the format understood by 'name_to_gpio' |
| function, e.g. PH1 for pin 1 of port H. |
| |
| config VIDEO_MVEBU |
| bool "Armada XP LCD controller" |
| default n |
| ---help--- |
| Support for the LCD controller integrated in the Marvell |
| Armada XP SoC. |
| |
| config I2C_EDID |
| bool "Enable EDID library" |
| depends on DM_I2C |
| default n |
| help |
| This enables library for accessing EDID data from an LCD panel. |
| |
| config DISPLAY |
| bool "Enable Display support" |
| depends on DM |
| default n |
| select I2C_EDID |
| help |
| This supports drivers that provide a display, such as eDP (Embedded |
| DisplayPort) and HDMI (High Definition Multimedia Interface). |
| The devices provide a simple interface to start up the display, |
| read display information and enable it. |
| |
| config VIDEO_ROCKCHIP |
| bool "Enable Rockchip video support" |
| depends on DM_VIDEO |
| help |
| Rockchip SoCs provide video output capabilities for High-Definition |
| Multimedia Interface (HDMI), Low-voltage Differential Signalling |
| (LVDS), embedded DisplayPort (eDP) and Display Serial Interface |
| (DSI). This driver supports the on-chip video output device, and |
| targets the Rockchip RK3288. |
| |
| config VIDEO_SANDBOX_SDL |
| bool "Enable sandbox video console using SDL" |
| depends on SANDBOX |
| help |
| When using sandbox you can enable an emulated LCD display which |
| appears as an SDL (Simple DirectMedia Layer) window. This is a |
| console device and can display stdout output. Within U-Boot is is |
| a normal bitmap display and can display images as well as text. |
| |
| config VIDEO_TEGRA124 |
| bool "Enable video support on Tegra124" |
| help |
| Tegra124 supports many video output options including eDP and |
| HDMI. At present only eDP is supported by U-Boot. This option |
| enables this support which can be used on devices which |
| have an eDP display connected. |
| |
| source "drivers/video/bridge/Kconfig" |
| |
| endmenu |