| /* |
| * mux.c |
| * |
| * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/sys_proto.h> |
| #include <asm/arch/mux.h> |
| #include "board.h" |
| |
| static struct module_pin_mux uart0_pin_mux[] = { |
| {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, |
| {OFFSET(uart0_txd), (MODE(0) | PULLUDDIS | PULLUP_EN | SLEWCTRL)}, |
| {-1}, |
| }; |
| |
| static struct module_pin_mux mmc0_pin_mux[] = { |
| {OFFSET(mmc0_clk), (MODE(0) | PULLUDDIS | RXACTIVE)}, /* MMC0_CLK */ |
| {OFFSET(mmc0_cmd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_CMD */ |
| {OFFSET(mmc0_dat0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT0 */ |
| {OFFSET(mmc0_dat1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT1 */ |
| {OFFSET(mmc0_dat2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT2 */ |
| {OFFSET(mmc0_dat3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* MMC0_DAT3 */ |
| {-1}, |
| }; |
| |
| static struct module_pin_mux i2c0_pin_mux[] = { |
| {OFFSET(i2c0_sda), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, |
| {OFFSET(i2c0_scl), (MODE(0) | PULLUP_EN | RXACTIVE | SLEWCTRL)}, |
| {-1}, |
| }; |
| |
| static struct module_pin_mux gpio0_22_pin_mux[] = { |
| {OFFSET(ddr_ba2), (MODE(9) | PULLUP_EN)}, /* GPIO0_22 */ |
| {-1}, |
| }; |
| |
| void enable_uart0_pin_mux(void) |
| { |
| configure_module_pin_mux(uart0_pin_mux); |
| } |
| |
| void enable_board_pin_mux(void) |
| { |
| configure_module_pin_mux(mmc0_pin_mux); |
| configure_module_pin_mux(i2c0_pin_mux); |
| |
| if (board_is_gpevm()) |
| configure_module_pin_mux(gpio0_22_pin_mux); |
| } |
| |
| void enable_i2c0_pin_mux(void) |
| { |
| configure_module_pin_mux(i2c0_pin_mux); |
| } |