| /* |
| * Copyright 2014 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <asm/arch/clock.h> |
| #include <asm/io.h> |
| #include <asm/arch/immap_ls102xa.h> |
| #include <asm/cache.h> |
| #include <asm/system.h> |
| #include <tsec.h> |
| #include <netdev.h> |
| #include <fsl_esdhc.h> |
| |
| #include "fsl_epu.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| #ifndef CONFIG_SYS_DCACHE_OFF |
| |
| /* |
| * Bit[1] of the descriptor indicates the descriptor type, |
| * and bit[0] indicates whether the descriptor is valid. |
| */ |
| #define PMD_TYPE_TABLE 0x3 |
| #define PMD_TYPE_SECT 0x1 |
| |
| /* AttrIndx[2:0] */ |
| #define PMD_ATTRINDX(t) ((t) << 2) |
| |
| /* Section */ |
| #define PMD_SECT_AF (1 << 10) |
| |
| #define BLOCK_SIZE_L1 (1UL << 30) |
| #define BLOCK_SIZE_L2 (1UL << 21) |
| |
| /* TTBCR flags */ |
| #define TTBCR_EAE (1 << 31) |
| #define TTBCR_T0SZ(x) ((x) << 0) |
| #define TTBCR_T1SZ(x) ((x) << 16) |
| #define TTBCR_USING_TTBR0 (TTBCR_T0SZ(0) | TTBCR_T1SZ(0)) |
| #define TTBCR_IRGN0_NC (0 << 8) |
| #define TTBCR_IRGN0_WBWA (1 << 8) |
| #define TTBCR_IRGN0_WT (2 << 8) |
| #define TTBCR_IRGN0_WBNWA (3 << 8) |
| #define TTBCR_IRGN0_MASK (3 << 8) |
| #define TTBCR_ORGN0_NC (0 << 10) |
| #define TTBCR_ORGN0_WBWA (1 << 10) |
| #define TTBCR_ORGN0_WT (2 << 10) |
| #define TTBCR_ORGN0_WBNWA (3 << 10) |
| #define TTBCR_ORGN0_MASK (3 << 10) |
| #define TTBCR_SHARED_NON (0 << 12) |
| #define TTBCR_SHARED_OUTER (2 << 12) |
| #define TTBCR_SHARED_INNER (3 << 12) |
| #define TTBCR_EPD0 (0 << 7) |
| #define TTBCR (TTBCR_SHARED_NON | \ |
| TTBCR_ORGN0_NC | \ |
| TTBCR_IRGN0_NC | \ |
| TTBCR_USING_TTBR0 | \ |
| TTBCR_EAE) |
| |
| /* |
| * Memory region attributes for LPAE (defined in pgtable): |
| * |
| * n = AttrIndx[2:0] |
| * |
| * n MAIR |
| * UNCACHED 000 00000000 |
| * BUFFERABLE 001 01000100 |
| * DEV_WC 001 01000100 |
| * WRITETHROUGH 010 10101010 |
| * WRITEBACK 011 11101110 |
| * DEV_CACHED 011 11101110 |
| * DEV_SHARED 100 00000100 |
| * DEV_NONSHARED 100 00000100 |
| * unused 101 |
| * unused 110 |
| * WRITEALLOC 111 11111111 |
| */ |
| #define MT_MAIR0 0xeeaa4400 |
| #define MT_MAIR1 0xff000004 |
| #define MT_STRONLY_ORDER 0 |
| #define MT_NORMAL_NC 1 |
| #define MT_DEVICE_MEM 4 |
| #define MT_NORMAL 7 |
| |
| /* The phy_addr must be aligned to 4KB */ |
| static inline void set_pgtable(u32 *page_table, u32 index, u32 phy_addr) |
| { |
| u32 value = phy_addr | PMD_TYPE_TABLE; |
| |
| page_table[2 * index] = value; |
| page_table[2 * index + 1] = 0; |
| } |
| |
| /* The phy_addr must be aligned to 4KB */ |
| static inline void set_pgsection(u32 *page_table, u32 index, u64 phy_addr, |
| u32 memory_type) |
| { |
| u64 value; |
| |
| value = phy_addr | PMD_TYPE_SECT | PMD_SECT_AF; |
| value |= PMD_ATTRINDX(memory_type); |
| page_table[2 * index] = value & 0xFFFFFFFF; |
| page_table[2 * index + 1] = (value >> 32) & 0xFFFFFFFF; |
| } |
| |
| /* |
| * Start MMU after DDR is available, we create MMU table in DRAM. |
| * The base address of TTLB is gd->arch.tlb_addr. We use two |
| * levels of translation tables here to cover 40-bit address space. |
| * |
| * The TTLBs are located at PHY 2G~4G. |
| * |
| * VA mapping: |
| * |
| * ------- <---- 0GB |
| * | | |
| * | | |
| * |-------| <---- 0x24000000 |
| * |///////| ===> 192MB VA map for PCIe1 with offset 0x40_0000_0000 |
| * |-------| <---- 0x300000000 |
| * | | |
| * |-------| <---- 0x34000000 |
| * |///////| ===> 192MB VA map for PCIe2 with offset 0x48_0000_0000 |
| * |-------| <---- 0x40000000 |
| * | | |
| * |-------| <---- 0x80000000 DDR0 space start |
| * |\\\\\\\| |
| *.|\\\\\\\| ===> 2GB VA map for 2GB DDR0 Memory space |
| * |\\\\\\\| |
| * ------- <---- 4GB DDR0 space end |
| */ |
| static void mmu_setup(void) |
| { |
| u32 *level0_table = (u32 *)gd->arch.tlb_addr; |
| u32 *level1_table = (u32 *)(gd->arch.tlb_addr + 0x1000); |
| u64 va_start = 0; |
| u32 reg; |
| int i; |
| |
| /* Level 0 Table 2-3 are used to map DDR */ |
| set_pgsection(level0_table, 3, 3 * BLOCK_SIZE_L1, MT_NORMAL); |
| set_pgsection(level0_table, 2, 2 * BLOCK_SIZE_L1, MT_NORMAL); |
| /* Level 0 Table 1 is used to map device */ |
| set_pgsection(level0_table, 1, 1 * BLOCK_SIZE_L1, MT_DEVICE_MEM); |
| /* Level 0 Table 0 is used to map device including PCIe MEM */ |
| set_pgtable(level0_table, 0, (u32)level1_table); |
| |
| /* Level 1 has 512 entries */ |
| for (i = 0; i < 512; i++) { |
| /* Mapping for PCIe 1 */ |
| if (va_start >= CONFIG_SYS_PCIE1_VIRT_ADDR && |
| va_start < (CONFIG_SYS_PCIE1_VIRT_ADDR + |
| CONFIG_SYS_PCIE_MMAP_SIZE)) |
| set_pgsection(level1_table, i, |
| CONFIG_SYS_PCIE1_PHYS_BASE + va_start, |
| MT_DEVICE_MEM); |
| /* Mapping for PCIe 2 */ |
| else if (va_start >= CONFIG_SYS_PCIE2_VIRT_ADDR && |
| va_start < (CONFIG_SYS_PCIE2_VIRT_ADDR + |
| CONFIG_SYS_PCIE_MMAP_SIZE)) |
| set_pgsection(level1_table, i, |
| CONFIG_SYS_PCIE2_PHYS_BASE + va_start, |
| MT_DEVICE_MEM); |
| else |
| set_pgsection(level1_table, i, |
| va_start, |
| MT_DEVICE_MEM); |
| va_start += BLOCK_SIZE_L2; |
| } |
| |
| asm volatile("dsb sy;isb"); |
| asm volatile("mcr p15, 0, %0, c2, c0, 2" /* Write RT to TTBCR */ |
| : : "r" (TTBCR) : "memory"); |
| asm volatile("mcrr p15, 0, %0, %1, c2" /* TTBR 0 */ |
| : : "r" ((u32)level0_table), "r" (0) : "memory"); |
| asm volatile("mcr p15, 0, %0, c10, c2, 0" /* write MAIR 0 */ |
| : : "r" (MT_MAIR0) : "memory"); |
| asm volatile("mcr p15, 0, %0, c10, c2, 1" /* write MAIR 1 */ |
| : : "r" (MT_MAIR1) : "memory"); |
| |
| /* Set the access control to all-supervisor */ |
| asm volatile("mcr p15, 0, %0, c3, c0, 0" |
| : : "r" (~0)); |
| |
| /* Enable the mmu */ |
| reg = get_cr(); |
| set_cr(reg | CR_M); |
| } |
| |
| /* |
| * This function is called from lib/board.c. It recreates MMU |
| * table in main memory. MMU and i/d-cache are enabled here. |
| */ |
| void enable_caches(void) |
| { |
| /* Invalidate all TLB */ |
| mmu_page_table_flush(gd->arch.tlb_addr, |
| gd->arch.tlb_addr + gd->arch.tlb_size); |
| /* Set up and enable mmu */ |
| mmu_setup(); |
| |
| /* Invalidate & Enable d-cache */ |
| invalidate_dcache_all(); |
| set_cr(get_cr() | CR_C); |
| } |
| #endif /* #ifndef CONFIG_SYS_DCACHE_OFF */ |
| |
| #if defined(CONFIG_DISPLAY_CPUINFO) |
| int print_cpuinfo(void) |
| { |
| char buf1[32], buf2[32]; |
| struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| unsigned int svr, major, minor, ver, i; |
| |
| svr = in_be32(&gur->svr); |
| major = SVR_MAJ(svr); |
| minor = SVR_MIN(svr); |
| |
| puts("CPU: Freescale LayerScape "); |
| |
| ver = SVR_SOC_VER(svr); |
| switch (ver) { |
| case SOC_VER_SLS1020: |
| puts("SLS1020"); |
| break; |
| case SOC_VER_LS1020: |
| puts("LS1020"); |
| break; |
| case SOC_VER_LS1021: |
| puts("LS1021"); |
| break; |
| case SOC_VER_LS1022: |
| puts("LS1022"); |
| break; |
| default: |
| puts("Unknown"); |
| break; |
| } |
| |
| if (IS_E_PROCESSOR(svr) && (ver != SOC_VER_SLS1020)) |
| puts("E"); |
| |
| printf(", Version: %d.%d, (0x%08x)\n", major, minor, svr); |
| |
| puts("Clock Configuration:"); |
| |
| printf("\n CPU0(ARMV7):%-4s MHz, ", strmhz(buf1, gd->cpu_clk)); |
| printf("\n Bus:%-4s MHz, ", strmhz(buf1, gd->bus_clk)); |
| printf("DDR:%-4s MHz (%s MT/s data rate), ", |
| strmhz(buf1, gd->mem_clk/2), strmhz(buf2, gd->mem_clk)); |
| puts("\n"); |
| |
| /* Display the RCW, so that no one gets confused as to what RCW |
| * we're actually using for this boot. |
| */ |
| puts("Reset Configuration Word (RCW):"); |
| for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) { |
| u32 rcw = in_be32(&gur->rcwsr[i]); |
| |
| if ((i % 4) == 0) |
| printf("\n %08x:", i * 4); |
| printf(" %08x", rcw); |
| } |
| puts("\n"); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_FSL_ESDHC |
| int cpu_mmc_init(bd_t *bis) |
| { |
| return fsl_esdhc_mmc_init(bis); |
| } |
| #endif |
| |
| int cpu_eth_init(bd_t *bis) |
| { |
| #ifdef CONFIG_TSEC_ENET |
| tsec_standard_init(bis); |
| #endif |
| |
| return 0; |
| } |
| |
| int arch_cpu_init(void) |
| { |
| void *epu_base = (void *)(CONFIG_SYS_DCSRBAR + EPU_BLOCK_OFFSET); |
| |
| /* |
| * After wakeup from deep sleep, Clear EPU registers |
| * as early as possible to prevent from possible issue. |
| * It's also safe to clear at normal boot. |
| */ |
| fsl_epu_clean(epu_base); |
| |
| return 0; |
| } |
| |
| #if defined(CONFIG_ARMV7_NONSEC) || defined(CONFIG_ARMV7_VIRT) |
| /* Set the address at which the secondary core starts from.*/ |
| void smp_set_core_boot_addr(unsigned long addr, int corenr) |
| { |
| struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| |
| out_be32(&gur->scratchrw[0], addr); |
| } |
| |
| /* Release the secondary core from holdoff state and kick it */ |
| void smp_kick_all_cpus(void) |
| { |
| struct ccsr_gur __iomem *gur = (void *)(CONFIG_SYS_FSL_GUTS_ADDR); |
| |
| out_be32(&gur->brrl, 0x2); |
| } |
| #endif |