| /* |
| * (C) Copyright 2006-2007 |
| * Stefan Roese, DENX Software Engineering, sr@denx.de. |
| * |
| * Configuation settings for the PDNB3 board. |
| * |
| * See file CREDITS for list of people who contributed to this |
| * project. |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * You should have received a copy of the GNU General Public License |
| * along with this program; if not, write to the Free Software |
| * Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| * MA 02111-1307 USA |
| */ |
| |
| #ifndef __CONFIG_H |
| #define __CONFIG_H |
| |
| /* |
| * High Level Configuration Options |
| * (easy to change) |
| */ |
| #define CONFIG_IXP425 1 /* This is an IXP425 CPU */ |
| #define CONFIG_PDNB3 1 /* on an PDNB3 board */ |
| |
| #define CONFIG_DISPLAY_CPUINFO 1 /* display cpu info (and speed) */ |
| #define CONFIG_DISPLAY_BOARDINFO 1 /* display board info */ |
| |
| /* |
| * Ethernet |
| */ |
| #define CONFIG_IXP4XX_NPE 1 /* include IXP4xx NPE support */ |
| #define CONFIG_NET_MULTI 1 |
| #define CONFIG_PHY_ADDR 16 /* NPE0 PHY address */ |
| #define CONFIG_HAS_ETH1 |
| #define CONFIG_PHY1_ADDR 18 /* NPE1 PHY address */ |
| #define CONFIG_MII 1 /* MII PHY management */ |
| #define CFG_RX_ETH_BUFFER 16 /* Number of ethernet rx buffers & descriptors */ |
| |
| /* |
| * Misc configuration options |
| */ |
| #define CONFIG_USE_IRQ 1 /* we need IRQ stuff for timer */ |
| |
| #define CONFIG_BOOTCOUNT_LIMIT /* support for bootcount limit */ |
| #define CFG_BOOTCOUNT_ADDR 0x60003000 /* inside qmrg sram */ |
| |
| #define CONFIG_CMDLINE_TAG 1 /* enable passing of ATAGs */ |
| #define CONFIG_SETUP_MEMORY_TAGS 1 |
| #define CONFIG_INITRD_TAG 1 |
| |
| /* |
| * Size of malloc() pool |
| */ |
| #define CFG_MALLOC_LEN (1 << 20) |
| #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ |
| |
| /* allow to overwrite serial and ethaddr */ |
| #define CONFIG_ENV_OVERWRITE |
| |
| #define CONFIG_BAUDRATE 115200 |
| #define CFG_IXP425_CONSOLE IXP425_UART1 /* we use UART1 for console */ |
| |
| |
| /* |
| * BOOTP options |
| */ |
| #define CONFIG_BOOTP_BOOTFILESIZE |
| #define CONFIG_BOOTP_BOOTPATH |
| #define CONFIG_BOOTP_GATEWAY |
| #define CONFIG_BOOTP_HOSTNAME |
| |
| |
| /* |
| * Command line configuration. |
| */ |
| #include <config_cmd_default.h> |
| |
| #define CONFIG_CMD_DHCP |
| #define CONFIG_CMD_DATE |
| #define CONFIG_CMD_NET |
| #define CONFIG_CMD_MII |
| #define CONFIG_CMD_I2C |
| #define CONFIG_CMD_ELF |
| #define CONFIG_CMD_PING |
| |
| #if !defined(CONFIG_SCPU) |
| #define CONFIG_CMD_NAND |
| #endif |
| |
| |
| #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ |
| #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ |
| |
| /* |
| * Miscellaneous configurable options |
| */ |
| #define CFG_LONGHELP /* undef to save memory */ |
| #define CFG_PROMPT "=> " /* Monitor Command Prompt */ |
| #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ |
| #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ |
| #define CFG_MAXARGS 16 /* max number of command args */ |
| #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ |
| |
| #define CFG_MEMTEST_START 0x00400000 /* memtest works on */ |
| #define CFG_MEMTEST_END 0x00800000 /* 4 ... 8 MB in DRAM */ |
| #define CFG_LOAD_ADDR 0x00010000 /* default load address */ |
| |
| #undef CFG_CLKS_IN_HZ /* everything, incl board info, in Hz */ |
| #define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */ |
| /* valid baudrates */ |
| #define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } |
| |
| /* |
| * Stack sizes |
| * |
| * The stack sizes are set up in start.S using the settings below |
| */ |
| #define CONFIG_STACKSIZE (128*1024) /* regular stack */ |
| #ifdef CONFIG_USE_IRQ |
| #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ |
| #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ |
| #endif |
| |
| /*************************************************************** |
| * Platform/Board specific defines start here. |
| ***************************************************************/ |
| |
| /*----------------------------------------------------------------------- |
| * Default configuration (environment varibles...) |
| *----------------------------------------------------------------------*/ |
| #define CONFIG_PREBOOT "echo;" \ |
| "echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \ |
| "echo" |
| |
| #undef CONFIG_BOOTARGS |
| |
| #define CONFIG_EXTRA_ENV_SETTINGS \ |
| "netdev=eth0\0" \ |
| "hostname=pdnb3\0" \ |
| "nfsargs=setenv bootargs root=/dev/nfs rw " \ |
| "nfsroot=${serverip}:${rootpath}\0" \ |
| "ramargs=setenv bootargs root=/dev/ram rw\0" \ |
| "addip=setenv bootargs ${bootargs} ethaddr=${ethaddr} " \ |
| "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ |
| ":${hostname}:${netdev}:off panic=1\0" \ |
| "addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate} " \ |
| "mtdparts=${mtdparts}\0" \ |
| "flash_nfs=run nfsargs addip addtty;" \ |
| "bootm ${kernel_addr}\0" \ |
| "flash_self=run ramargs addip addtty;" \ |
| "bootm ${kernel_addr} ${ramdisk_addr}\0" \ |
| "net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \ |
| "bootm\0" \ |
| "rootpath=/opt/buildroot\0" \ |
| "bootfile=/tftpboot/netbox/uImage\0" \ |
| "kernel_addr=50080000\0" \ |
| "ramdisk_addr=50200000\0" \ |
| "load=tftp 100000 /tftpboot/netbox/u-boot.bin\0" \ |
| "update=protect off 50000000 5007dfff;era 50000000 5007dfff;" \ |
| "cp.b 100000 50000000 ${filesize};" \ |
| "setenv filesize;saveenv\0" \ |
| "upd=run load update\0" \ |
| "ipaddr=10.0.0.233\0" \ |
| "serverip=10.0.0.152\0" \ |
| "netmask=255.255.0.0\0" \ |
| "ethaddr=c6:6f:13:36:f3:81\0" \ |
| "eth1addr=c6:6f:13:36:f3:82\0" \ |
| "mtdparts=IXP4XX-Flash.0:504k@0(uboot),4k@504k(env)," \ |
| "4k@508k(renv)\0" \ |
| "" |
| #define CONFIG_BOOTCOMMAND "run net_nfs" |
| |
| /* |
| * Physical Memory Map |
| */ |
| #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ |
| #define PHYS_SDRAM_1 0x00000000 /* SDRAM Bank #1 */ |
| #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ |
| |
| #define CFG_FLASH_BASE 0x50000000 |
| #define CFG_MONITOR_BASE CFG_FLASH_BASE |
| #if defined(CONFIG_SCPU) |
| #define CFG_MONITOR_LEN (384 << 10) /* Reserve 512 kB for Monitor */ |
| #else |
| #define CFG_MONITOR_LEN (504 << 10) /* Reserve 512 kB for Monitor */ |
| #endif |
| |
| /* |
| * Expansion bus settings |
| */ |
| #if defined(CONFIG_SCPU) |
| #define CFG_EXP_CS0 0x94d23C42 /* 8bit, max size */ |
| #else |
| #define CFG_EXP_CS0 0x94913C43 /* 8bit, max size */ |
| #endif |
| #define CFG_EXP_CS1 0x85000043 /* 8bit, 512bytes */ |
| |
| /* |
| * SDRAM settings |
| */ |
| #define CFG_SDR_CONFIG 0x18 |
| #define CFG_SDR_MODE_CONFIG 0x1 |
| #define CFG_SDRAM_REFRESH_CNT 0x81a |
| |
| /* |
| * FLASH and environment organization |
| */ |
| #if defined(CONFIG_SCPU) |
| #define CFG_FLASH_CFI /* The flash is CFI compatible */ |
| #define CFG_FLASH_CFI_DRIVER /* Use common CFI driver */ |
| #define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ |
| #endif |
| |
| #define FLASH_BASE0_PRELIM CFG_FLASH_BASE /* FLASH bank #0 */ |
| |
| #define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ |
| #define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */ |
| |
| #define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ |
| #define CFG_FLASH_WRITE_TOUT 1000 /* Timeout for Flash Write (in ms) */ |
| |
| #define CFG_FLASH_WORD_SIZE unsigned char /* flash word size (width) */ |
| #define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */ |
| #define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */ |
| /* |
| * The following defines are added for buggy IOP480 byte interface. |
| * All other boards should use the standard values (CPCI405 etc.) |
| */ |
| #define CFG_FLASH_READ0 0x0000 /* 0 is standard */ |
| #define CFG_FLASH_READ1 0x0001 /* 1 is standard */ |
| #define CFG_FLASH_READ2 0x0002 /* 2 is standard */ |
| |
| #define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */ |
| |
| #define CFG_ENV_IS_IN_FLASH 1 |
| |
| #define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_MONITOR_LEN) |
| #if defined(CONFIG_SCPU) |
| /* no redundant environment on SCPU */ |
| #define CFG_ENV_SECT_SIZE 0x20000 /* size of one complete sector */ |
| #define CFG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ |
| #else |
| #define CFG_ENV_SECT_SIZE 0x1000 /* size of one complete sector */ |
| #define CFG_ENV_SIZE 0x1000 /* Total Size of Environment Sector */ |
| |
| /* Address and size of Redundant Environment Sector */ |
| #define CFG_ENV_ADDR_REDUND (CFG_ENV_ADDR + CFG_ENV_SECT_SIZE) |
| #define CFG_ENV_SIZE_REDUND (CFG_ENV_SIZE) |
| #endif |
| |
| #if !defined(CONFIG_SCPU) |
| /* |
| * NAND-FLASH stuff |
| */ |
| #define CFG_MAX_NAND_DEVICE 1 |
| #define NAND_MAX_CHIPS 1 |
| #define CFG_NAND_BASE 0x51000000 /* NAND FLASH Base Address */ |
| #endif |
| |
| /* |
| * GPIO settings |
| */ |
| |
| /* FPGA program pin configuration */ |
| #define CFG_GPIO_PRG 12 /* FPGA program pin (cpu output)*/ |
| #define CFG_GPIO_CLK 10 /* FPGA clk pin (cpu output) */ |
| #define CFG_GPIO_DATA 14 /* FPGA data pin (cpu output) */ |
| #define CFG_GPIO_INIT 13 /* FPGA init pin (cpu input) */ |
| #define CFG_GPIO_DONE 11 /* FPGA done pin (cpu input) */ |
| |
| /* other GPIO's */ |
| #define CFG_GPIO_RESTORE_INT 0 |
| #define CFG_GPIO_RESTART_INT 1 |
| #define CFG_GPIO_SYS_RUNNING 2 |
| #define CFG_GPIO_PCI_INTA 3 |
| #define CFG_GPIO_PCI_INTB 4 |
| #define CFG_GPIO_I2C_SCL 6 |
| #define CFG_GPIO_I2C_SDA 7 |
| #define CFG_GPIO_FPGA_RESET 9 |
| #define CFG_GPIO_CLK_33M 15 |
| |
| /* |
| * I2C stuff |
| */ |
| |
| /* enable I2C and select the hardware/software driver */ |
| #undef CONFIG_HARD_I2C /* I2C with hardware support */ |
| #define CONFIG_SOFT_I2C 1 /* I2C bit-banged */ |
| |
| #define CFG_I2C_SPEED 83000 /* 83 kHz is supposed to work */ |
| #define CFG_I2C_SLAVE 0xFE |
| |
| /* |
| * Software (bit-bang) I2C driver configuration |
| */ |
| #define PB_SCL (1 << CFG_GPIO_I2C_SCL) |
| #define PB_SDA (1 << CFG_GPIO_I2C_SDA) |
| |
| #define I2C_INIT GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SCL) |
| #define I2C_ACTIVE GPIO_OUTPUT_ENABLE(CFG_GPIO_I2C_SDA) |
| #define I2C_TRISTATE GPIO_OUTPUT_DISABLE(CFG_GPIO_I2C_SDA) |
| #define I2C_READ ((*IXP425_GPIO_GPINR & PB_SDA) != 0) |
| #define I2C_SDA(bit) if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SDA); \ |
| else GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SDA) |
| #define I2C_SCL(bit) if (bit) GPIO_OUTPUT_SET(CFG_GPIO_I2C_SCL); \ |
| else GPIO_OUTPUT_CLEAR(CFG_GPIO_I2C_SCL) |
| #define I2C_DELAY udelay(3) /* 1/4 I2C clock duration */ |
| |
| /* |
| * I2C RTC |
| */ |
| #if 0 /* test-only */ |
| #define CONFIG_RTC_DS1340 1 |
| #define CFG_I2C_RTC_ADDR 0x68 |
| #else |
| /* M41T11 Serial Access Timekeeper(R) SRAM */ |
| #define CONFIG_RTC_M41T11 1 |
| #define CFG_I2C_RTC_ADDR 0x68 |
| #define CFG_M41T11_BASE_YEAR 1900 /* play along with the linux driver */ |
| #endif |
| |
| /* |
| * Spartan3 FPGA configuration support |
| */ |
| #define CFG_FPGA_MAX_SIZE 700*1024 /* 700kByte for XC3S500E */ |
| |
| #define CFG_FPGA_PRG (1 << CFG_GPIO_PRG) /* FPGA program pin (cpu output)*/ |
| #define CFG_FPGA_CLK (1 << CFG_GPIO_CLK) /* FPGA clk pin (cpu output) */ |
| #define CFG_FPGA_DATA (1 << CFG_GPIO_DATA) /* FPGA data pin (cpu output) */ |
| #define CFG_FPGA_INIT (1 << CFG_GPIO_INIT) /* FPGA init pin (cpu input) */ |
| #define CFG_FPGA_DONE (1 << CFG_GPIO_DONE) /* FPGA done pin (cpu input) */ |
| |
| /* |
| * Cache Configuration |
| */ |
| #define CFG_CACHELINE_SIZE 32 |
| |
| #endif /* __CONFIG_H */ |