| // SPDX-License-Identifier: GPL-2.0+ |
| /** |
| * ufs.c - Universal Flash Subsystem (UFS) driver |
| * |
| * Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported |
| * to u-boot. |
| * |
| * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com |
| */ |
| |
| #include <charset.h> |
| #include <common.h> |
| #include <dm.h> |
| #include <dm/devres.h> |
| #include <dm/lists.h> |
| #include <dm/device-internal.h> |
| #include <malloc.h> |
| #include <hexdump.h> |
| #include <scsi.h> |
| |
| #include <asm/dma-mapping.h> |
| |
| #include "ufs.h" |
| |
| #define UFSHCD_ENABLE_INTRS (UTP_TRANSFER_REQ_COMPL |\ |
| UTP_TASK_REQ_COMPL |\ |
| UFSHCD_ERROR_MASK) |
| /* maximum number of link-startup retries */ |
| #define DME_LINKSTARTUP_RETRIES 3 |
| |
| /* maximum number of retries for a general UIC command */ |
| #define UFS_UIC_COMMAND_RETRIES 3 |
| |
| /* Query request retries */ |
| #define QUERY_REQ_RETRIES 3 |
| /* Query request timeout */ |
| #define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */ |
| |
| /* maximum timeout in ms for a general UIC command */ |
| #define UFS_UIC_CMD_TIMEOUT 1000 |
| /* NOP OUT retries waiting for NOP IN response */ |
| #define NOP_OUT_RETRIES 10 |
| /* Timeout after 30 msecs if NOP OUT hangs without response */ |
| #define NOP_OUT_TIMEOUT 30 /* msecs */ |
| |
| /* Only use one Task Tag for all requests */ |
| #define TASK_TAG 0 |
| |
| /* Expose the flag value from utp_upiu_query.value */ |
| #define MASK_QUERY_UPIU_FLAG_LOC 0xFF |
| |
| #define MAX_PRDT_ENTRY 262144 |
| |
| /* maximum bytes per request */ |
| #define UFS_MAX_BYTES (128 * 256 * 1024) |
| |
| static inline bool ufshcd_is_hba_active(struct ufs_hba *hba); |
| static inline void ufshcd_hba_stop(struct ufs_hba *hba); |
| static int ufshcd_hba_enable(struct ufs_hba *hba); |
| |
| /* |
| * ufshcd_wait_for_register - wait for register value to change |
| */ |
| static int ufshcd_wait_for_register(struct ufs_hba *hba, u32 reg, u32 mask, |
| u32 val, unsigned long timeout_ms) |
| { |
| int err = 0; |
| unsigned long start = get_timer(0); |
| |
| /* ignore bits that we don't intend to wait on */ |
| val = val & mask; |
| |
| while ((ufshcd_readl(hba, reg) & mask) != val) { |
| if (get_timer(start) > timeout_ms) { |
| if ((ufshcd_readl(hba, reg) & mask) != val) |
| err = -ETIMEDOUT; |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ufshcd_init_pwr_info - setting the POR (power on reset) |
| * values in hba power info |
| */ |
| static void ufshcd_init_pwr_info(struct ufs_hba *hba) |
| { |
| hba->pwr_info.gear_rx = UFS_PWM_G1; |
| hba->pwr_info.gear_tx = UFS_PWM_G1; |
| hba->pwr_info.lane_rx = 1; |
| hba->pwr_info.lane_tx = 1; |
| hba->pwr_info.pwr_rx = SLOWAUTO_MODE; |
| hba->pwr_info.pwr_tx = SLOWAUTO_MODE; |
| hba->pwr_info.hs_rate = 0; |
| } |
| |
| /** |
| * ufshcd_print_pwr_info - print power params as saved in hba |
| * power info |
| */ |
| static void ufshcd_print_pwr_info(struct ufs_hba *hba) |
| { |
| static const char * const names[] = { |
| "INVALID MODE", |
| "FAST MODE", |
| "SLOW_MODE", |
| "INVALID MODE", |
| "FASTAUTO_MODE", |
| "SLOWAUTO_MODE", |
| "INVALID MODE", |
| }; |
| |
| dev_err(hba->dev, "[RX, TX]: gear=[%d, %d], lane[%d, %d], pwr[%s, %s], rate = %d\n", |
| hba->pwr_info.gear_rx, hba->pwr_info.gear_tx, |
| hba->pwr_info.lane_rx, hba->pwr_info.lane_tx, |
| names[hba->pwr_info.pwr_rx], |
| names[hba->pwr_info.pwr_tx], |
| hba->pwr_info.hs_rate); |
| } |
| |
| /** |
| * ufshcd_ready_for_uic_cmd - Check if controller is ready |
| * to accept UIC commands |
| */ |
| static inline bool ufshcd_ready_for_uic_cmd(struct ufs_hba *hba) |
| { |
| if (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & UIC_COMMAND_READY) |
| return true; |
| else |
| return false; |
| } |
| |
| /** |
| * ufshcd_get_uic_cmd_result - Get the UIC command result |
| */ |
| static inline int ufshcd_get_uic_cmd_result(struct ufs_hba *hba) |
| { |
| return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_2) & |
| MASK_UIC_COMMAND_RESULT; |
| } |
| |
| /** |
| * ufshcd_get_dme_attr_val - Get the value of attribute returned by UIC command |
| */ |
| static inline u32 ufshcd_get_dme_attr_val(struct ufs_hba *hba) |
| { |
| return ufshcd_readl(hba, REG_UIC_COMMAND_ARG_3); |
| } |
| |
| /** |
| * ufshcd_is_device_present - Check if any device connected to |
| * the host controller |
| */ |
| static inline bool ufshcd_is_device_present(struct ufs_hba *hba) |
| { |
| return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) & |
| DEVICE_PRESENT) ? true : false; |
| } |
| |
| /** |
| * ufshcd_send_uic_cmd - UFS Interconnect layer command API |
| * |
| */ |
| static int ufshcd_send_uic_cmd(struct ufs_hba *hba, struct uic_command *uic_cmd) |
| { |
| unsigned long start = 0; |
| u32 intr_status; |
| u32 enabled_intr_status; |
| |
| if (!ufshcd_ready_for_uic_cmd(hba)) { |
| dev_err(hba->dev, |
| "Controller not ready to accept UIC commands\n"); |
| return -EIO; |
| } |
| |
| debug("sending uic command:%d\n", uic_cmd->command); |
| |
| /* Write Args */ |
| ufshcd_writel(hba, uic_cmd->argument1, REG_UIC_COMMAND_ARG_1); |
| ufshcd_writel(hba, uic_cmd->argument2, REG_UIC_COMMAND_ARG_2); |
| ufshcd_writel(hba, uic_cmd->argument3, REG_UIC_COMMAND_ARG_3); |
| |
| /* Write UIC Cmd */ |
| ufshcd_writel(hba, uic_cmd->command & COMMAND_OPCODE_MASK, |
| REG_UIC_COMMAND); |
| |
| start = get_timer(0); |
| do { |
| intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); |
| enabled_intr_status = intr_status & hba->intr_mask; |
| ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); |
| |
| if (get_timer(start) > UFS_UIC_CMD_TIMEOUT) { |
| dev_err(hba->dev, |
| "Timedout waiting for UIC response\n"); |
| |
| return -ETIMEDOUT; |
| } |
| |
| if (enabled_intr_status & UFSHCD_ERROR_MASK) { |
| dev_err(hba->dev, "Error in status:%08x\n", |
| enabled_intr_status); |
| |
| return -1; |
| } |
| } while (!(enabled_intr_status & UFSHCD_UIC_MASK)); |
| |
| uic_cmd->argument2 = ufshcd_get_uic_cmd_result(hba); |
| uic_cmd->argument3 = ufshcd_get_dme_attr_val(hba); |
| |
| debug("Sent successfully\n"); |
| |
| return 0; |
| } |
| |
| /** |
| * ufshcd_dme_set_attr - UIC command for DME_SET, DME_PEER_SET |
| * |
| */ |
| int ufshcd_dme_set_attr(struct ufs_hba *hba, u32 attr_sel, u8 attr_set, |
| u32 mib_val, u8 peer) |
| { |
| struct uic_command uic_cmd = {0}; |
| static const char *const action[] = { |
| "dme-set", |
| "dme-peer-set" |
| }; |
| const char *set = action[!!peer]; |
| int ret; |
| int retries = UFS_UIC_COMMAND_RETRIES; |
| |
| uic_cmd.command = peer ? |
| UIC_CMD_DME_PEER_SET : UIC_CMD_DME_SET; |
| uic_cmd.argument1 = attr_sel; |
| uic_cmd.argument2 = UIC_ARG_ATTR_TYPE(attr_set); |
| uic_cmd.argument3 = mib_val; |
| |
| do { |
| /* for peer attributes we retry upon failure */ |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); |
| if (ret) |
| dev_dbg(hba->dev, "%s: attr-id 0x%x val 0x%x error code %d\n", |
| set, UIC_GET_ATTR_ID(attr_sel), mib_val, ret); |
| } while (ret && peer && --retries); |
| |
| if (ret) |
| dev_err(hba->dev, "%s: attr-id 0x%x val 0x%x failed %d retries\n", |
| set, UIC_GET_ATTR_ID(attr_sel), mib_val, |
| UFS_UIC_COMMAND_RETRIES - retries); |
| |
| return ret; |
| } |
| |
| /** |
| * ufshcd_dme_get_attr - UIC command for DME_GET, DME_PEER_GET |
| * |
| */ |
| int ufshcd_dme_get_attr(struct ufs_hba *hba, u32 attr_sel, |
| u32 *mib_val, u8 peer) |
| { |
| struct uic_command uic_cmd = {0}; |
| static const char *const action[] = { |
| "dme-get", |
| "dme-peer-get" |
| }; |
| const char *get = action[!!peer]; |
| int ret; |
| int retries = UFS_UIC_COMMAND_RETRIES; |
| |
| uic_cmd.command = peer ? |
| UIC_CMD_DME_PEER_GET : UIC_CMD_DME_GET; |
| uic_cmd.argument1 = attr_sel; |
| |
| do { |
| /* for peer attributes we retry upon failure */ |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); |
| if (ret) |
| dev_dbg(hba->dev, "%s: attr-id 0x%x error code %d\n", |
| get, UIC_GET_ATTR_ID(attr_sel), ret); |
| } while (ret && peer && --retries); |
| |
| if (ret) |
| dev_err(hba->dev, "%s: attr-id 0x%x failed %d retries\n", |
| get, UIC_GET_ATTR_ID(attr_sel), |
| UFS_UIC_COMMAND_RETRIES - retries); |
| |
| if (mib_val && !ret) |
| *mib_val = uic_cmd.argument3; |
| |
| return ret; |
| } |
| |
| static int ufshcd_disable_tx_lcc(struct ufs_hba *hba, bool peer) |
| { |
| u32 tx_lanes, i, err = 0; |
| |
| if (!peer) |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), |
| &tx_lanes); |
| else |
| ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), |
| &tx_lanes); |
| for (i = 0; i < tx_lanes; i++) { |
| if (!peer) |
| err = ufshcd_dme_set(hba, |
| UIC_ARG_MIB_SEL(TX_LCC_ENABLE, |
| UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), |
| 0); |
| else |
| err = ufshcd_dme_peer_set(hba, |
| UIC_ARG_MIB_SEL(TX_LCC_ENABLE, |
| UIC_ARG_MPHY_TX_GEN_SEL_INDEX(i)), |
| 0); |
| if (err) { |
| dev_err(hba->dev, "%s: TX LCC Disable failed, peer = %d, lane = %d, err = %d", |
| __func__, peer, i, err); |
| break; |
| } |
| } |
| |
| return err; |
| } |
| |
| static inline int ufshcd_disable_device_tx_lcc(struct ufs_hba *hba) |
| { |
| return ufshcd_disable_tx_lcc(hba, true); |
| } |
| |
| /** |
| * ufshcd_dme_link_startup - Notify Unipro to perform link startup |
| * |
| */ |
| static int ufshcd_dme_link_startup(struct ufs_hba *hba) |
| { |
| struct uic_command uic_cmd = {0}; |
| int ret; |
| |
| uic_cmd.command = UIC_CMD_DME_LINK_STARTUP; |
| |
| ret = ufshcd_send_uic_cmd(hba, &uic_cmd); |
| if (ret) |
| dev_dbg(hba->dev, |
| "dme-link-startup: error code %d\n", ret); |
| return ret; |
| } |
| |
| /** |
| * ufshcd_disable_intr_aggr - Disables interrupt aggregation. |
| * |
| */ |
| static inline void ufshcd_disable_intr_aggr(struct ufs_hba *hba) |
| { |
| ufshcd_writel(hba, 0, REG_UTP_TRANSFER_REQ_INT_AGG_CONTROL); |
| } |
| |
| /** |
| * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY |
| */ |
| static inline int ufshcd_get_lists_status(u32 reg) |
| { |
| return !((reg & UFSHCD_STATUS_READY) == UFSHCD_STATUS_READY); |
| } |
| |
| /** |
| * ufshcd_enable_run_stop_reg - Enable run-stop registers, |
| * When run-stop registers are set to 1, it indicates the |
| * host controller that it can process the requests |
| */ |
| static void ufshcd_enable_run_stop_reg(struct ufs_hba *hba) |
| { |
| ufshcd_writel(hba, UTP_TASK_REQ_LIST_RUN_STOP_BIT, |
| REG_UTP_TASK_REQ_LIST_RUN_STOP); |
| ufshcd_writel(hba, UTP_TRANSFER_REQ_LIST_RUN_STOP_BIT, |
| REG_UTP_TRANSFER_REQ_LIST_RUN_STOP); |
| } |
| |
| /** |
| * ufshcd_enable_intr - enable interrupts |
| */ |
| static void ufshcd_enable_intr(struct ufs_hba *hba, u32 intrs) |
| { |
| u32 set = ufshcd_readl(hba, REG_INTERRUPT_ENABLE); |
| u32 rw; |
| |
| if (hba->version == UFSHCI_VERSION_10) { |
| rw = set & INTERRUPT_MASK_RW_VER_10; |
| set = rw | ((set ^ intrs) & intrs); |
| } else { |
| set |= intrs; |
| } |
| |
| ufshcd_writel(hba, set, REG_INTERRUPT_ENABLE); |
| |
| hba->intr_mask = set; |
| } |
| |
| /** |
| * ufshcd_make_hba_operational - Make UFS controller operational |
| * |
| * To bring UFS host controller to operational state, |
| * 1. Enable required interrupts |
| * 2. Configure interrupt aggregation |
| * 3. Program UTRL and UTMRL base address |
| * 4. Configure run-stop-registers |
| * |
| */ |
| static int ufshcd_make_hba_operational(struct ufs_hba *hba) |
| { |
| int err = 0; |
| u32 reg; |
| |
| /* Enable required interrupts */ |
| ufshcd_enable_intr(hba, UFSHCD_ENABLE_INTRS); |
| |
| /* Disable interrupt aggregation */ |
| ufshcd_disable_intr_aggr(hba); |
| |
| /* Configure UTRL and UTMRL base address registers */ |
| ufshcd_writel(hba, lower_32_bits((dma_addr_t)hba->utrdl), |
| REG_UTP_TRANSFER_REQ_LIST_BASE_L); |
| ufshcd_writel(hba, upper_32_bits((dma_addr_t)hba->utrdl), |
| REG_UTP_TRANSFER_REQ_LIST_BASE_H); |
| ufshcd_writel(hba, lower_32_bits((dma_addr_t)hba->utmrdl), |
| REG_UTP_TASK_REQ_LIST_BASE_L); |
| ufshcd_writel(hba, upper_32_bits((dma_addr_t)hba->utmrdl), |
| REG_UTP_TASK_REQ_LIST_BASE_H); |
| |
| /* |
| * UCRDY, UTMRLDY and UTRLRDY bits must be 1 |
| */ |
| reg = ufshcd_readl(hba, REG_CONTROLLER_STATUS); |
| if (!(ufshcd_get_lists_status(reg))) { |
| ufshcd_enable_run_stop_reg(hba); |
| } else { |
| dev_err(hba->dev, |
| "Host controller not ready to process requests"); |
| err = -EIO; |
| goto out; |
| } |
| |
| out: |
| return err; |
| } |
| |
| /** |
| * ufshcd_link_startup - Initialize unipro link startup |
| */ |
| static int ufshcd_link_startup(struct ufs_hba *hba) |
| { |
| int ret; |
| int retries = DME_LINKSTARTUP_RETRIES; |
| bool link_startup_again = true; |
| |
| link_startup: |
| do { |
| ufshcd_ops_link_startup_notify(hba, PRE_CHANGE); |
| |
| ret = ufshcd_dme_link_startup(hba); |
| |
| /* check if device is detected by inter-connect layer */ |
| if (!ret && !ufshcd_is_device_present(hba)) { |
| dev_err(hba->dev, "%s: Device not present\n", __func__); |
| ret = -ENXIO; |
| goto out; |
| } |
| |
| /* |
| * DME link lost indication is only received when link is up, |
| * but we can't be sure if the link is up until link startup |
| * succeeds. So reset the local Uni-Pro and try again. |
| */ |
| if (ret && ufshcd_hba_enable(hba)) |
| goto out; |
| } while (ret && retries--); |
| |
| if (ret) |
| /* failed to get the link up... retire */ |
| goto out; |
| |
| if (link_startup_again) { |
| link_startup_again = false; |
| retries = DME_LINKSTARTUP_RETRIES; |
| goto link_startup; |
| } |
| |
| /* Mark that link is up in PWM-G1, 1-lane, SLOW-AUTO mode */ |
| ufshcd_init_pwr_info(hba); |
| |
| if (hba->quirks & UFSHCD_QUIRK_BROKEN_LCC) { |
| ret = ufshcd_disable_device_tx_lcc(hba); |
| if (ret) |
| goto out; |
| } |
| |
| /* Include any host controller configuration via UIC commands */ |
| ret = ufshcd_ops_link_startup_notify(hba, POST_CHANGE); |
| if (ret) |
| goto out; |
| |
| ret = ufshcd_make_hba_operational(hba); |
| out: |
| if (ret) |
| dev_err(hba->dev, "link startup failed %d\n", ret); |
| |
| return ret; |
| } |
| |
| /** |
| * ufshcd_hba_stop - Send controller to reset state |
| */ |
| static inline void ufshcd_hba_stop(struct ufs_hba *hba) |
| { |
| int err; |
| |
| ufshcd_writel(hba, CONTROLLER_DISABLE, REG_CONTROLLER_ENABLE); |
| err = ufshcd_wait_for_register(hba, REG_CONTROLLER_ENABLE, |
| CONTROLLER_ENABLE, CONTROLLER_DISABLE, |
| 10); |
| if (err) |
| dev_err(hba->dev, "%s: Controller disable failed\n", __func__); |
| } |
| |
| /** |
| * ufshcd_is_hba_active - Get controller state |
| */ |
| static inline bool ufshcd_is_hba_active(struct ufs_hba *hba) |
| { |
| return (ufshcd_readl(hba, REG_CONTROLLER_ENABLE) & CONTROLLER_ENABLE) |
| ? false : true; |
| } |
| |
| /** |
| * ufshcd_hba_start - Start controller initialization sequence |
| */ |
| static inline void ufshcd_hba_start(struct ufs_hba *hba) |
| { |
| ufshcd_writel(hba, CONTROLLER_ENABLE, REG_CONTROLLER_ENABLE); |
| } |
| |
| /** |
| * ufshcd_hba_enable - initialize the controller |
| */ |
| static int ufshcd_hba_enable(struct ufs_hba *hba) |
| { |
| int retry; |
| |
| if (!ufshcd_is_hba_active(hba)) |
| /* change controller state to "reset state" */ |
| ufshcd_hba_stop(hba); |
| |
| ufshcd_ops_hce_enable_notify(hba, PRE_CHANGE); |
| |
| /* start controller initialization sequence */ |
| ufshcd_hba_start(hba); |
| |
| /* |
| * To initialize a UFS host controller HCE bit must be set to 1. |
| * During initialization the HCE bit value changes from 1->0->1. |
| * When the host controller completes initialization sequence |
| * it sets the value of HCE bit to 1. The same HCE bit is read back |
| * to check if the controller has completed initialization sequence. |
| * So without this delay the value HCE = 1, set in the previous |
| * instruction might be read back. |
| * This delay can be changed based on the controller. |
| */ |
| mdelay(1); |
| |
| /* wait for the host controller to complete initialization */ |
| retry = 10; |
| while (ufshcd_is_hba_active(hba)) { |
| if (retry) { |
| retry--; |
| } else { |
| dev_err(hba->dev, "Controller enable failed\n"); |
| return -EIO; |
| } |
| mdelay(5); |
| } |
| |
| /* enable UIC related interrupts */ |
| ufshcd_enable_intr(hba, UFSHCD_UIC_MASK); |
| |
| ufshcd_ops_hce_enable_notify(hba, POST_CHANGE); |
| |
| return 0; |
| } |
| |
| /** |
| * ufshcd_host_memory_configure - configure local reference block with |
| * memory offsets |
| */ |
| static void ufshcd_host_memory_configure(struct ufs_hba *hba) |
| { |
| struct utp_transfer_req_desc *utrdlp; |
| dma_addr_t cmd_desc_dma_addr; |
| u16 response_offset; |
| u16 prdt_offset; |
| |
| utrdlp = hba->utrdl; |
| cmd_desc_dma_addr = (dma_addr_t)hba->ucdl; |
| |
| utrdlp->command_desc_base_addr_lo = |
| cpu_to_le32(lower_32_bits(cmd_desc_dma_addr)); |
| utrdlp->command_desc_base_addr_hi = |
| cpu_to_le32(upper_32_bits(cmd_desc_dma_addr)); |
| |
| response_offset = offsetof(struct utp_transfer_cmd_desc, response_upiu); |
| prdt_offset = offsetof(struct utp_transfer_cmd_desc, prd_table); |
| |
| utrdlp->response_upiu_offset = cpu_to_le16(response_offset >> 2); |
| utrdlp->prd_table_offset = cpu_to_le16(prdt_offset >> 2); |
| utrdlp->response_upiu_length = cpu_to_le16(ALIGNED_UPIU_SIZE >> 2); |
| |
| hba->ucd_req_ptr = (struct utp_upiu_req *)hba->ucdl; |
| hba->ucd_rsp_ptr = |
| (struct utp_upiu_rsp *)&hba->ucdl->response_upiu; |
| hba->ucd_prdt_ptr = |
| (struct ufshcd_sg_entry *)&hba->ucdl->prd_table; |
| } |
| |
| /** |
| * ufshcd_memory_alloc - allocate memory for host memory space data structures |
| */ |
| static int ufshcd_memory_alloc(struct ufs_hba *hba) |
| { |
| /* Allocate one Transfer Request Descriptor |
| * Should be aligned to 1k boundary. |
| */ |
| hba->utrdl = memalign(1024, sizeof(struct utp_transfer_req_desc)); |
| if (!hba->utrdl) { |
| dev_err(hba->dev, "Transfer Descriptor memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| /* Allocate one Command Descriptor |
| * Should be aligned to 1k boundary. |
| */ |
| hba->ucdl = memalign(1024, sizeof(struct utp_transfer_cmd_desc)); |
| if (!hba->ucdl) { |
| dev_err(hba->dev, "Command descriptor memory allocation failed\n"); |
| return -ENOMEM; |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ufshcd_get_intr_mask - Get the interrupt bit mask |
| */ |
| static inline u32 ufshcd_get_intr_mask(struct ufs_hba *hba) |
| { |
| u32 intr_mask = 0; |
| |
| switch (hba->version) { |
| case UFSHCI_VERSION_10: |
| intr_mask = INTERRUPT_MASK_ALL_VER_10; |
| break; |
| case UFSHCI_VERSION_11: |
| case UFSHCI_VERSION_20: |
| intr_mask = INTERRUPT_MASK_ALL_VER_11; |
| break; |
| case UFSHCI_VERSION_21: |
| default: |
| intr_mask = INTERRUPT_MASK_ALL_VER_21; |
| break; |
| } |
| |
| return intr_mask; |
| } |
| |
| /** |
| * ufshcd_get_ufs_version - Get the UFS version supported by the HBA |
| */ |
| static inline u32 ufshcd_get_ufs_version(struct ufs_hba *hba) |
| { |
| return ufshcd_readl(hba, REG_UFS_VERSION); |
| } |
| |
| /** |
| * ufshcd_get_upmcrs - Get the power mode change request status |
| */ |
| static inline u8 ufshcd_get_upmcrs(struct ufs_hba *hba) |
| { |
| return (ufshcd_readl(hba, REG_CONTROLLER_STATUS) >> 8) & 0x7; |
| } |
| |
| /** |
| * ufshcd_prepare_req_desc_hdr() - Fills the requests header |
| * descriptor according to request |
| */ |
| static void ufshcd_prepare_req_desc_hdr(struct utp_transfer_req_desc *req_desc, |
| u32 *upiu_flags, |
| enum dma_data_direction cmd_dir) |
| { |
| u32 data_direction; |
| u32 dword_0; |
| |
| if (cmd_dir == DMA_FROM_DEVICE) { |
| data_direction = UTP_DEVICE_TO_HOST; |
| *upiu_flags = UPIU_CMD_FLAGS_READ; |
| } else if (cmd_dir == DMA_TO_DEVICE) { |
| data_direction = UTP_HOST_TO_DEVICE; |
| *upiu_flags = UPIU_CMD_FLAGS_WRITE; |
| } else { |
| data_direction = UTP_NO_DATA_TRANSFER; |
| *upiu_flags = UPIU_CMD_FLAGS_NONE; |
| } |
| |
| dword_0 = data_direction | (0x1 << UPIU_COMMAND_TYPE_OFFSET); |
| |
| /* Enable Interrupt for command */ |
| dword_0 |= UTP_REQ_DESC_INT_CMD; |
| |
| /* Transfer request descriptor header fields */ |
| req_desc->header.dword_0 = cpu_to_le32(dword_0); |
| /* dword_1 is reserved, hence it is set to 0 */ |
| req_desc->header.dword_1 = 0; |
| /* |
| * assigning invalid value for command status. Controller |
| * updates OCS on command completion, with the command |
| * status |
| */ |
| req_desc->header.dword_2 = |
| cpu_to_le32(OCS_INVALID_COMMAND_STATUS); |
| /* dword_3 is reserved, hence it is set to 0 */ |
| req_desc->header.dword_3 = 0; |
| |
| req_desc->prd_table_length = 0; |
| } |
| |
| static void ufshcd_prepare_utp_query_req_upiu(struct ufs_hba *hba, |
| u32 upiu_flags) |
| { |
| struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr; |
| struct ufs_query *query = &hba->dev_cmd.query; |
| u16 len = be16_to_cpu(query->request.upiu_req.length); |
| |
| /* Query request header */ |
| ucd_req_ptr->header.dword_0 = |
| UPIU_HEADER_DWORD(UPIU_TRANSACTION_QUERY_REQ, |
| upiu_flags, 0, TASK_TAG); |
| ucd_req_ptr->header.dword_1 = |
| UPIU_HEADER_DWORD(0, query->request.query_func, |
| 0, 0); |
| |
| /* Data segment length only need for WRITE_DESC */ |
| if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) |
| ucd_req_ptr->header.dword_2 = |
| UPIU_HEADER_DWORD(0, 0, (len >> 8), (u8)len); |
| else |
| ucd_req_ptr->header.dword_2 = 0; |
| |
| /* Copy the Query Request buffer as is */ |
| memcpy(&ucd_req_ptr->qr, &query->request.upiu_req, QUERY_OSF_SIZE); |
| |
| /* Copy the Descriptor */ |
| if (query->request.upiu_req.opcode == UPIU_QUERY_OPCODE_WRITE_DESC) |
| memcpy(ucd_req_ptr + 1, query->descriptor, len); |
| |
| memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); |
| } |
| |
| static inline void ufshcd_prepare_utp_nop_upiu(struct ufs_hba *hba) |
| { |
| struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr; |
| |
| memset(ucd_req_ptr, 0, sizeof(struct utp_upiu_req)); |
| |
| /* command descriptor fields */ |
| ucd_req_ptr->header.dword_0 = |
| UPIU_HEADER_DWORD(UPIU_TRANSACTION_NOP_OUT, 0, 0, 0x1f); |
| /* clear rest of the fields of basic header */ |
| ucd_req_ptr->header.dword_1 = 0; |
| ucd_req_ptr->header.dword_2 = 0; |
| |
| memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); |
| } |
| |
| /** |
| * ufshcd_comp_devman_upiu - UFS Protocol Information Unit(UPIU) |
| * for Device Management Purposes |
| */ |
| static int ufshcd_comp_devman_upiu(struct ufs_hba *hba, |
| enum dev_cmd_type cmd_type) |
| { |
| u32 upiu_flags; |
| int ret = 0; |
| struct utp_transfer_req_desc *req_desc = hba->utrdl; |
| |
| hba->dev_cmd.type = cmd_type; |
| |
| ufshcd_prepare_req_desc_hdr(req_desc, &upiu_flags, DMA_NONE); |
| switch (cmd_type) { |
| case DEV_CMD_TYPE_QUERY: |
| ufshcd_prepare_utp_query_req_upiu(hba, upiu_flags); |
| break; |
| case DEV_CMD_TYPE_NOP: |
| ufshcd_prepare_utp_nop_upiu(hba); |
| break; |
| default: |
| ret = -EINVAL; |
| } |
| |
| return ret; |
| } |
| |
| static int ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) |
| { |
| unsigned long start; |
| u32 intr_status; |
| u32 enabled_intr_status; |
| |
| ufshcd_writel(hba, 1 << task_tag, REG_UTP_TRANSFER_REQ_DOOR_BELL); |
| |
| start = get_timer(0); |
| do { |
| intr_status = ufshcd_readl(hba, REG_INTERRUPT_STATUS); |
| enabled_intr_status = intr_status & hba->intr_mask; |
| ufshcd_writel(hba, intr_status, REG_INTERRUPT_STATUS); |
| |
| if (get_timer(start) > QUERY_REQ_TIMEOUT) { |
| dev_err(hba->dev, |
| "Timedout waiting for UTP response\n"); |
| |
| return -ETIMEDOUT; |
| } |
| |
| if (enabled_intr_status & UFSHCD_ERROR_MASK) { |
| dev_err(hba->dev, "Error in status:%08x\n", |
| enabled_intr_status); |
| |
| return -1; |
| } |
| } while (!(enabled_intr_status & UTP_TRANSFER_REQ_COMPL)); |
| |
| return 0; |
| } |
| |
| /** |
| * ufshcd_get_req_rsp - returns the TR response transaction type |
| */ |
| static inline int ufshcd_get_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) |
| { |
| return be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24; |
| } |
| |
| /** |
| * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status |
| * |
| */ |
| static inline int ufshcd_get_tr_ocs(struct ufs_hba *hba) |
| { |
| return le32_to_cpu(hba->utrdl->header.dword_2) & MASK_OCS; |
| } |
| |
| static inline int ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr) |
| { |
| return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; |
| } |
| |
| static int ufshcd_check_query_response(struct ufs_hba *hba) |
| { |
| struct ufs_query_res *query_res = &hba->dev_cmd.query.response; |
| |
| /* Get the UPIU response */ |
| query_res->response = ufshcd_get_rsp_upiu_result(hba->ucd_rsp_ptr) >> |
| UPIU_RSP_CODE_OFFSET; |
| return query_res->response; |
| } |
| |
| /** |
| * ufshcd_copy_query_response() - Copy the Query Response and the data |
| * descriptor |
| */ |
| static int ufshcd_copy_query_response(struct ufs_hba *hba) |
| { |
| struct ufs_query_res *query_res = &hba->dev_cmd.query.response; |
| |
| memcpy(&query_res->upiu_res, &hba->ucd_rsp_ptr->qr, QUERY_OSF_SIZE); |
| |
| /* Get the descriptor */ |
| if (hba->dev_cmd.query.descriptor && |
| hba->ucd_rsp_ptr->qr.opcode == UPIU_QUERY_OPCODE_READ_DESC) { |
| u8 *descp = (u8 *)hba->ucd_rsp_ptr + |
| GENERAL_UPIU_REQUEST_SIZE; |
| u16 resp_len; |
| u16 buf_len; |
| |
| /* data segment length */ |
| resp_len = be32_to_cpu(hba->ucd_rsp_ptr->header.dword_2) & |
| MASK_QUERY_DATA_SEG_LEN; |
| buf_len = |
| be16_to_cpu(hba->dev_cmd.query.request.upiu_req.length); |
| if (likely(buf_len >= resp_len)) { |
| memcpy(hba->dev_cmd.query.descriptor, descp, resp_len); |
| } else { |
| dev_warn(hba->dev, |
| "%s: Response size is bigger than buffer", |
| __func__); |
| return -EINVAL; |
| } |
| } |
| |
| return 0; |
| } |
| |
| /** |
| * ufshcd_exec_dev_cmd - API for sending device management requests |
| */ |
| static int ufshcd_exec_dev_cmd(struct ufs_hba *hba, enum dev_cmd_type cmd_type, |
| int timeout) |
| { |
| int err; |
| int resp; |
| |
| err = ufshcd_comp_devman_upiu(hba, cmd_type); |
| if (err) |
| return err; |
| |
| err = ufshcd_send_command(hba, TASK_TAG); |
| if (err) |
| return err; |
| |
| err = ufshcd_get_tr_ocs(hba); |
| if (err) { |
| dev_err(hba->dev, "Error in OCS:%d\n", err); |
| return -EINVAL; |
| } |
| |
| resp = ufshcd_get_req_rsp(hba->ucd_rsp_ptr); |
| switch (resp) { |
| case UPIU_TRANSACTION_NOP_IN: |
| break; |
| case UPIU_TRANSACTION_QUERY_RSP: |
| err = ufshcd_check_query_response(hba); |
| if (!err) |
| err = ufshcd_copy_query_response(hba); |
| break; |
| case UPIU_TRANSACTION_REJECT_UPIU: |
| /* TODO: handle Reject UPIU Response */ |
| err = -EPERM; |
| dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n", |
| __func__); |
| break; |
| default: |
| err = -EINVAL; |
| dev_err(hba->dev, "%s: Invalid device management cmd response: %x\n", |
| __func__, resp); |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ufshcd_init_query() - init the query response and request parameters |
| */ |
| static inline void ufshcd_init_query(struct ufs_hba *hba, |
| struct ufs_query_req **request, |
| struct ufs_query_res **response, |
| enum query_opcode opcode, |
| u8 idn, u8 index, u8 selector) |
| { |
| *request = &hba->dev_cmd.query.request; |
| *response = &hba->dev_cmd.query.response; |
| memset(*request, 0, sizeof(struct ufs_query_req)); |
| memset(*response, 0, sizeof(struct ufs_query_res)); |
| (*request)->upiu_req.opcode = opcode; |
| (*request)->upiu_req.idn = idn; |
| (*request)->upiu_req.index = index; |
| (*request)->upiu_req.selector = selector; |
| } |
| |
| /** |
| * ufshcd_query_flag() - API function for sending flag query requests |
| */ |
| int ufshcd_query_flag(struct ufs_hba *hba, enum query_opcode opcode, |
| enum flag_idn idn, bool *flag_res) |
| { |
| struct ufs_query_req *request = NULL; |
| struct ufs_query_res *response = NULL; |
| int err, index = 0, selector = 0; |
| int timeout = QUERY_REQ_TIMEOUT; |
| |
| ufshcd_init_query(hba, &request, &response, opcode, idn, index, |
| selector); |
| |
| switch (opcode) { |
| case UPIU_QUERY_OPCODE_SET_FLAG: |
| case UPIU_QUERY_OPCODE_CLEAR_FLAG: |
| case UPIU_QUERY_OPCODE_TOGGLE_FLAG: |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; |
| break; |
| case UPIU_QUERY_OPCODE_READ_FLAG: |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; |
| if (!flag_res) { |
| /* No dummy reads */ |
| dev_err(hba->dev, "%s: Invalid argument for read request\n", |
| __func__); |
| err = -EINVAL; |
| goto out; |
| } |
| break; |
| default: |
| dev_err(hba->dev, |
| "%s: Expected query flag opcode but got = %d\n", |
| __func__, opcode); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, timeout); |
| |
| if (err) { |
| dev_err(hba->dev, |
| "%s: Sending flag query for idn %d failed, err = %d\n", |
| __func__, idn, err); |
| goto out; |
| } |
| |
| if (flag_res) |
| *flag_res = (be32_to_cpu(response->upiu_res.value) & |
| MASK_QUERY_UPIU_FLAG_LOC) & 0x1; |
| |
| out: |
| return err; |
| } |
| |
| static int ufshcd_query_flag_retry(struct ufs_hba *hba, |
| enum query_opcode opcode, |
| enum flag_idn idn, bool *flag_res) |
| { |
| int ret; |
| int retries; |
| |
| for (retries = 0; retries < QUERY_REQ_RETRIES; retries++) { |
| ret = ufshcd_query_flag(hba, opcode, idn, flag_res); |
| if (ret) |
| dev_dbg(hba->dev, |
| "%s: failed with error %d, retries %d\n", |
| __func__, ret, retries); |
| else |
| break; |
| } |
| |
| if (ret) |
| dev_err(hba->dev, |
| "%s: query attribute, opcode %d, idn %d, failed with error %d after %d retires\n", |
| __func__, opcode, idn, ret, retries); |
| return ret; |
| } |
| |
| static int __ufshcd_query_descriptor(struct ufs_hba *hba, |
| enum query_opcode opcode, |
| enum desc_idn idn, u8 index, u8 selector, |
| u8 *desc_buf, int *buf_len) |
| { |
| struct ufs_query_req *request = NULL; |
| struct ufs_query_res *response = NULL; |
| int err; |
| |
| if (!desc_buf) { |
| dev_err(hba->dev, "%s: descriptor buffer required for opcode 0x%x\n", |
| __func__, opcode); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| if (*buf_len < QUERY_DESC_MIN_SIZE || *buf_len > QUERY_DESC_MAX_SIZE) { |
| dev_err(hba->dev, "%s: descriptor buffer size (%d) is out of range\n", |
| __func__, *buf_len); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| ufshcd_init_query(hba, &request, &response, opcode, idn, index, |
| selector); |
| hba->dev_cmd.query.descriptor = desc_buf; |
| request->upiu_req.length = cpu_to_be16(*buf_len); |
| |
| switch (opcode) { |
| case UPIU_QUERY_OPCODE_WRITE_DESC: |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_WRITE_REQUEST; |
| break; |
| case UPIU_QUERY_OPCODE_READ_DESC: |
| request->query_func = UPIU_QUERY_FUNC_STANDARD_READ_REQUEST; |
| break; |
| default: |
| dev_err(hba->dev, "%s: Expected query descriptor opcode but got = 0x%.2x\n", |
| __func__, opcode); |
| err = -EINVAL; |
| goto out; |
| } |
| |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_QUERY, QUERY_REQ_TIMEOUT); |
| |
| if (err) { |
| dev_err(hba->dev, "%s: opcode 0x%.2x for idn %d failed, index %d, err = %d\n", |
| __func__, opcode, idn, index, err); |
| goto out; |
| } |
| |
| hba->dev_cmd.query.descriptor = NULL; |
| *buf_len = be16_to_cpu(response->upiu_res.length); |
| |
| out: |
| return err; |
| } |
| |
| /** |
| * ufshcd_query_descriptor_retry - API function for sending descriptor requests |
| */ |
| int ufshcd_query_descriptor_retry(struct ufs_hba *hba, enum query_opcode opcode, |
| enum desc_idn idn, u8 index, u8 selector, |
| u8 *desc_buf, int *buf_len) |
| { |
| int err; |
| int retries; |
| |
| for (retries = QUERY_REQ_RETRIES; retries > 0; retries--) { |
| err = __ufshcd_query_descriptor(hba, opcode, idn, index, |
| selector, desc_buf, buf_len); |
| if (!err || err == -EINVAL) |
| break; |
| } |
| |
| return err; |
| } |
| |
| /** |
| * ufshcd_read_desc_length - read the specified descriptor length from header |
| */ |
| static int ufshcd_read_desc_length(struct ufs_hba *hba, enum desc_idn desc_id, |
| int desc_index, int *desc_length) |
| { |
| int ret; |
| u8 header[QUERY_DESC_HDR_SIZE]; |
| int header_len = QUERY_DESC_HDR_SIZE; |
| |
| if (desc_id >= QUERY_DESC_IDN_MAX) |
| return -EINVAL; |
| |
| ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, |
| desc_id, desc_index, 0, header, |
| &header_len); |
| |
| if (ret) { |
| dev_err(hba->dev, "%s: Failed to get descriptor header id %d", |
| __func__, desc_id); |
| return ret; |
| } else if (desc_id != header[QUERY_DESC_DESC_TYPE_OFFSET]) { |
| dev_warn(hba->dev, "%s: descriptor header id %d and desc_id %d mismatch", |
| __func__, header[QUERY_DESC_DESC_TYPE_OFFSET], |
| desc_id); |
| ret = -EINVAL; |
| } |
| |
| *desc_length = header[QUERY_DESC_LENGTH_OFFSET]; |
| |
| return ret; |
| } |
| |
| static void ufshcd_init_desc_sizes(struct ufs_hba *hba) |
| { |
| int err; |
| |
| err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_DEVICE, 0, |
| &hba->desc_size.dev_desc); |
| if (err) |
| hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE; |
| |
| err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_POWER, 0, |
| &hba->desc_size.pwr_desc); |
| if (err) |
| hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE; |
| |
| err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_INTERCONNECT, 0, |
| &hba->desc_size.interc_desc); |
| if (err) |
| hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE; |
| |
| err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_CONFIGURATION, 0, |
| &hba->desc_size.conf_desc); |
| if (err) |
| hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE; |
| |
| err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_UNIT, 0, |
| &hba->desc_size.unit_desc); |
| if (err) |
| hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE; |
| |
| err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_GEOMETRY, 0, |
| &hba->desc_size.geom_desc); |
| if (err) |
| hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE; |
| |
| err = ufshcd_read_desc_length(hba, QUERY_DESC_IDN_HEALTH, 0, |
| &hba->desc_size.hlth_desc); |
| if (err) |
| hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE; |
| } |
| |
| /** |
| * ufshcd_map_desc_id_to_length - map descriptor IDN to its length |
| * |
| */ |
| int ufshcd_map_desc_id_to_length(struct ufs_hba *hba, enum desc_idn desc_id, |
| int *desc_len) |
| { |
| switch (desc_id) { |
| case QUERY_DESC_IDN_DEVICE: |
| *desc_len = hba->desc_size.dev_desc; |
| break; |
| case QUERY_DESC_IDN_POWER: |
| *desc_len = hba->desc_size.pwr_desc; |
| break; |
| case QUERY_DESC_IDN_GEOMETRY: |
| *desc_len = hba->desc_size.geom_desc; |
| break; |
| case QUERY_DESC_IDN_CONFIGURATION: |
| *desc_len = hba->desc_size.conf_desc; |
| break; |
| case QUERY_DESC_IDN_UNIT: |
| *desc_len = hba->desc_size.unit_desc; |
| break; |
| case QUERY_DESC_IDN_INTERCONNECT: |
| *desc_len = hba->desc_size.interc_desc; |
| break; |
| case QUERY_DESC_IDN_STRING: |
| *desc_len = QUERY_DESC_MAX_SIZE; |
| break; |
| case QUERY_DESC_IDN_HEALTH: |
| *desc_len = hba->desc_size.hlth_desc; |
| break; |
| case QUERY_DESC_IDN_RFU_0: |
| case QUERY_DESC_IDN_RFU_1: |
| *desc_len = 0; |
| break; |
| default: |
| *desc_len = 0; |
| return -EINVAL; |
| } |
| return 0; |
| } |
| EXPORT_SYMBOL(ufshcd_map_desc_id_to_length); |
| |
| /** |
| * ufshcd_read_desc_param - read the specified descriptor parameter |
| * |
| */ |
| int ufshcd_read_desc_param(struct ufs_hba *hba, enum desc_idn desc_id, |
| int desc_index, u8 param_offset, u8 *param_read_buf, |
| u8 param_size) |
| { |
| int ret; |
| u8 *desc_buf; |
| int buff_len; |
| bool is_kmalloc = true; |
| |
| /* Safety check */ |
| if (desc_id >= QUERY_DESC_IDN_MAX || !param_size) |
| return -EINVAL; |
| |
| /* Get the max length of descriptor from structure filled up at probe |
| * time. |
| */ |
| ret = ufshcd_map_desc_id_to_length(hba, desc_id, &buff_len); |
| |
| /* Sanity checks */ |
| if (ret || !buff_len) { |
| dev_err(hba->dev, "%s: Failed to get full descriptor length", |
| __func__); |
| return ret; |
| } |
| |
| /* Check whether we need temp memory */ |
| if (param_offset != 0 || param_size < buff_len) { |
| desc_buf = kmalloc(buff_len, GFP_KERNEL); |
| if (!desc_buf) |
| return -ENOMEM; |
| } else { |
| desc_buf = param_read_buf; |
| is_kmalloc = false; |
| } |
| |
| /* Request for full descriptor */ |
| ret = ufshcd_query_descriptor_retry(hba, UPIU_QUERY_OPCODE_READ_DESC, |
| desc_id, desc_index, 0, desc_buf, |
| &buff_len); |
| |
| if (ret) { |
| dev_err(hba->dev, "%s: Failed reading descriptor. desc_id %d, desc_index %d, param_offset %d, ret %d", |
| __func__, desc_id, desc_index, param_offset, ret); |
| goto out; |
| } |
| |
| /* Sanity check */ |
| if (desc_buf[QUERY_DESC_DESC_TYPE_OFFSET] != desc_id) { |
| dev_err(hba->dev, "%s: invalid desc_id %d in descriptor header", |
| __func__, desc_buf[QUERY_DESC_DESC_TYPE_OFFSET]); |
| ret = -EINVAL; |
| goto out; |
| } |
| |
| /* Check wherher we will not copy more data, than available */ |
| if (is_kmalloc && param_size > buff_len) |
| param_size = buff_len; |
| |
| if (is_kmalloc) |
| memcpy(param_read_buf, &desc_buf[param_offset], param_size); |
| out: |
| if (is_kmalloc) |
| kfree(desc_buf); |
| return ret; |
| } |
| |
| /* replace non-printable or non-ASCII characters with spaces */ |
| static inline void ufshcd_remove_non_printable(uint8_t *val) |
| { |
| if (!val) |
| return; |
| |
| if (*val < 0x20 || *val > 0x7e) |
| *val = ' '; |
| } |
| |
| /** |
| * ufshcd_uic_pwr_ctrl - executes UIC commands (which affects the link power |
| * state) and waits for it to take effect. |
| * |
| */ |
| static int ufshcd_uic_pwr_ctrl(struct ufs_hba *hba, struct uic_command *cmd) |
| { |
| unsigned long start = 0; |
| u8 status; |
| int ret; |
| |
| ret = ufshcd_send_uic_cmd(hba, cmd); |
| if (ret) { |
| dev_err(hba->dev, |
| "pwr ctrl cmd 0x%x with mode 0x%x uic error %d\n", |
| cmd->command, cmd->argument3, ret); |
| |
| return ret; |
| } |
| |
| start = get_timer(0); |
| do { |
| status = ufshcd_get_upmcrs(hba); |
| if (get_timer(start) > UFS_UIC_CMD_TIMEOUT) { |
| dev_err(hba->dev, |
| "pwr ctrl cmd 0x%x failed, host upmcrs:0x%x\n", |
| cmd->command, status); |
| ret = (status != PWR_OK) ? status : -1; |
| break; |
| } |
| } while (status != PWR_LOCAL); |
| |
| return ret; |
| } |
| |
| /** |
| * ufshcd_uic_change_pwr_mode - Perform the UIC power mode change |
| * using DME_SET primitives. |
| */ |
| static int ufshcd_uic_change_pwr_mode(struct ufs_hba *hba, u8 mode) |
| { |
| struct uic_command uic_cmd = {0}; |
| int ret; |
| |
| uic_cmd.command = UIC_CMD_DME_SET; |
| uic_cmd.argument1 = UIC_ARG_MIB(PA_PWRMODE); |
| uic_cmd.argument3 = mode; |
| ret = ufshcd_uic_pwr_ctrl(hba, &uic_cmd); |
| |
| return ret; |
| } |
| |
| static |
| void ufshcd_prepare_utp_scsi_cmd_upiu(struct ufs_hba *hba, |
| struct scsi_cmd *pccb, u32 upiu_flags) |
| { |
| struct utp_upiu_req *ucd_req_ptr = hba->ucd_req_ptr; |
| unsigned int cdb_len; |
| |
| /* command descriptor fields */ |
| ucd_req_ptr->header.dword_0 = |
| UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND, upiu_flags, |
| pccb->lun, TASK_TAG); |
| ucd_req_ptr->header.dword_1 = |
| UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI, 0, 0, 0); |
| |
| /* Total EHS length and Data segment length will be zero */ |
| ucd_req_ptr->header.dword_2 = 0; |
| |
| ucd_req_ptr->sc.exp_data_transfer_len = cpu_to_be32(pccb->datalen); |
| |
| cdb_len = min_t(unsigned short, pccb->cmdlen, UFS_CDB_SIZE); |
| memset(ucd_req_ptr->sc.cdb, 0, UFS_CDB_SIZE); |
| memcpy(ucd_req_ptr->sc.cdb, pccb->cmd, cdb_len); |
| |
| memset(hba->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp)); |
| } |
| |
| static inline void prepare_prdt_desc(struct ufshcd_sg_entry *entry, |
| unsigned char *buf, ulong len) |
| { |
| entry->size = cpu_to_le32(len) | GENMASK(1, 0); |
| entry->base_addr = cpu_to_le32(lower_32_bits((unsigned long)buf)); |
| entry->upper_addr = cpu_to_le32(upper_32_bits((unsigned long)buf)); |
| } |
| |
| static void prepare_prdt_table(struct ufs_hba *hba, struct scsi_cmd *pccb) |
| { |
| struct utp_transfer_req_desc *req_desc = hba->utrdl; |
| struct ufshcd_sg_entry *prd_table = hba->ucd_prdt_ptr; |
| ulong datalen = pccb->datalen; |
| int table_length; |
| u8 *buf; |
| int i; |
| |
| if (!datalen) { |
| req_desc->prd_table_length = 0; |
| return; |
| } |
| |
| table_length = DIV_ROUND_UP(pccb->datalen, MAX_PRDT_ENTRY); |
| buf = pccb->pdata; |
| i = table_length; |
| while (--i) { |
| prepare_prdt_desc(&prd_table[table_length - i - 1], buf, |
| MAX_PRDT_ENTRY - 1); |
| buf += MAX_PRDT_ENTRY; |
| datalen -= MAX_PRDT_ENTRY; |
| } |
| |
| prepare_prdt_desc(&prd_table[table_length - i - 1], buf, datalen - 1); |
| |
| req_desc->prd_table_length = table_length; |
| } |
| |
| static int ufs_scsi_exec(struct udevice *scsi_dev, struct scsi_cmd *pccb) |
| { |
| struct ufs_hba *hba = dev_get_uclass_priv(scsi_dev->parent); |
| struct utp_transfer_req_desc *req_desc = hba->utrdl; |
| u32 upiu_flags; |
| int ocs, result = 0; |
| u8 scsi_status; |
| |
| ufshcd_prepare_req_desc_hdr(req_desc, &upiu_flags, pccb->dma_dir); |
| ufshcd_prepare_utp_scsi_cmd_upiu(hba, pccb, upiu_flags); |
| prepare_prdt_table(hba, pccb); |
| |
| ufshcd_send_command(hba, TASK_TAG); |
| |
| ocs = ufshcd_get_tr_ocs(hba); |
| switch (ocs) { |
| case OCS_SUCCESS: |
| result = ufshcd_get_req_rsp(hba->ucd_rsp_ptr); |
| switch (result) { |
| case UPIU_TRANSACTION_RESPONSE: |
| result = ufshcd_get_rsp_upiu_result(hba->ucd_rsp_ptr); |
| |
| scsi_status = result & MASK_SCSI_STATUS; |
| if (scsi_status) |
| return -EINVAL; |
| |
| break; |
| case UPIU_TRANSACTION_REJECT_UPIU: |
| /* TODO: handle Reject UPIU Response */ |
| dev_err(hba->dev, |
| "Reject UPIU not fully implemented\n"); |
| return -EINVAL; |
| default: |
| dev_err(hba->dev, |
| "Unexpected request response code = %x\n", |
| result); |
| return -EINVAL; |
| } |
| break; |
| default: |
| dev_err(hba->dev, "OCS error from controller = %x\n", ocs); |
| return -EINVAL; |
| } |
| |
| return 0; |
| } |
| |
| static inline int ufshcd_read_desc(struct ufs_hba *hba, enum desc_idn desc_id, |
| int desc_index, u8 *buf, u32 size) |
| { |
| return ufshcd_read_desc_param(hba, desc_id, desc_index, 0, buf, size); |
| } |
| |
| static int ufshcd_read_device_desc(struct ufs_hba *hba, u8 *buf, u32 size) |
| { |
| return ufshcd_read_desc(hba, QUERY_DESC_IDN_DEVICE, 0, buf, size); |
| } |
| |
| /** |
| * ufshcd_read_string_desc - read string descriptor |
| * |
| */ |
| int ufshcd_read_string_desc(struct ufs_hba *hba, int desc_index, |
| u8 *buf, u32 size, bool ascii) |
| { |
| int err = 0; |
| |
| err = ufshcd_read_desc(hba, QUERY_DESC_IDN_STRING, desc_index, buf, |
| size); |
| |
| if (err) { |
| dev_err(hba->dev, "%s: reading String Desc failed after %d retries. err = %d\n", |
| __func__, QUERY_REQ_RETRIES, err); |
| goto out; |
| } |
| |
| if (ascii) { |
| int desc_len; |
| int ascii_len; |
| int i; |
| u8 *buff_ascii; |
| |
| desc_len = buf[0]; |
| /* remove header and divide by 2 to move from UTF16 to UTF8 */ |
| ascii_len = (desc_len - QUERY_DESC_HDR_SIZE) / 2 + 1; |
| if (size < ascii_len + QUERY_DESC_HDR_SIZE) { |
| dev_err(hba->dev, "%s: buffer allocated size is too small\n", |
| __func__); |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| buff_ascii = kmalloc(ascii_len, GFP_KERNEL); |
| if (!buff_ascii) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| /* |
| * the descriptor contains string in UTF16 format |
| * we need to convert to utf-8 so it can be displayed |
| */ |
| utf16_to_utf8(buff_ascii, |
| (uint16_t *)&buf[QUERY_DESC_HDR_SIZE], ascii_len); |
| |
| /* replace non-printable or non-ASCII characters with spaces */ |
| for (i = 0; i < ascii_len; i++) |
| ufshcd_remove_non_printable(&buff_ascii[i]); |
| |
| memset(buf + QUERY_DESC_HDR_SIZE, 0, |
| size - QUERY_DESC_HDR_SIZE); |
| memcpy(buf + QUERY_DESC_HDR_SIZE, buff_ascii, ascii_len); |
| buf[QUERY_DESC_LENGTH_OFFSET] = ascii_len + QUERY_DESC_HDR_SIZE; |
| kfree(buff_ascii); |
| } |
| out: |
| return err; |
| } |
| |
| static int ufs_get_device_desc(struct ufs_hba *hba, |
| struct ufs_dev_desc *dev_desc) |
| { |
| int err; |
| size_t buff_len; |
| u8 model_index; |
| u8 *desc_buf; |
| |
| buff_len = max_t(size_t, hba->desc_size.dev_desc, |
| QUERY_DESC_MAX_SIZE + 1); |
| desc_buf = kmalloc(buff_len, GFP_KERNEL); |
| if (!desc_buf) { |
| err = -ENOMEM; |
| goto out; |
| } |
| |
| err = ufshcd_read_device_desc(hba, desc_buf, hba->desc_size.dev_desc); |
| if (err) { |
| dev_err(hba->dev, "%s: Failed reading Device Desc. err = %d\n", |
| __func__, err); |
| goto out; |
| } |
| |
| /* |
| * getting vendor (manufacturerID) and Bank Index in big endian |
| * format |
| */ |
| dev_desc->wmanufacturerid = desc_buf[DEVICE_DESC_PARAM_MANF_ID] << 8 | |
| desc_buf[DEVICE_DESC_PARAM_MANF_ID + 1]; |
| |
| model_index = desc_buf[DEVICE_DESC_PARAM_PRDCT_NAME]; |
| |
| /* Zero-pad entire buffer for string termination. */ |
| memset(desc_buf, 0, buff_len); |
| |
| err = ufshcd_read_string_desc(hba, model_index, desc_buf, |
| QUERY_DESC_MAX_SIZE, true/*ASCII*/); |
| if (err) { |
| dev_err(hba->dev, "%s: Failed reading Product Name. err = %d\n", |
| __func__, err); |
| goto out; |
| } |
| |
| desc_buf[QUERY_DESC_MAX_SIZE] = '\0'; |
| strlcpy(dev_desc->model, (char *)(desc_buf + QUERY_DESC_HDR_SIZE), |
| min_t(u8, desc_buf[QUERY_DESC_LENGTH_OFFSET], |
| MAX_MODEL_LEN)); |
| |
| /* Null terminate the model string */ |
| dev_desc->model[MAX_MODEL_LEN] = '\0'; |
| |
| out: |
| kfree(desc_buf); |
| return err; |
| } |
| |
| /** |
| * ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device |
| */ |
| static int ufshcd_get_max_pwr_mode(struct ufs_hba *hba) |
| { |
| struct ufs_pa_layer_attr *pwr_info = &hba->max_pwr_info.info; |
| |
| if (hba->max_pwr_info.is_valid) |
| return 0; |
| |
| pwr_info->pwr_tx = FAST_MODE; |
| pwr_info->pwr_rx = FAST_MODE; |
| pwr_info->hs_rate = PA_HS_MODE_B; |
| |
| /* Get the connected lane count */ |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDRXDATALANES), |
| &pwr_info->lane_rx); |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_CONNECTEDTXDATALANES), |
| &pwr_info->lane_tx); |
| |
| if (!pwr_info->lane_rx || !pwr_info->lane_tx) { |
| dev_err(hba->dev, "%s: invalid connected lanes value. rx=%d, tx=%d\n", |
| __func__, pwr_info->lane_rx, pwr_info->lane_tx); |
| return -EINVAL; |
| } |
| |
| /* |
| * First, get the maximum gears of HS speed. |
| * If a zero value, it means there is no HSGEAR capability. |
| * Then, get the maximum gears of PWM speed. |
| */ |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), &pwr_info->gear_rx); |
| if (!pwr_info->gear_rx) { |
| ufshcd_dme_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), |
| &pwr_info->gear_rx); |
| if (!pwr_info->gear_rx) { |
| dev_err(hba->dev, "%s: invalid max pwm rx gear read = %d\n", |
| __func__, pwr_info->gear_rx); |
| return -EINVAL; |
| } |
| pwr_info->pwr_rx = SLOW_MODE; |
| } |
| |
| ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXHSGEAR), |
| &pwr_info->gear_tx); |
| if (!pwr_info->gear_tx) { |
| ufshcd_dme_peer_get(hba, UIC_ARG_MIB(PA_MAXRXPWMGEAR), |
| &pwr_info->gear_tx); |
| if (!pwr_info->gear_tx) { |
| dev_err(hba->dev, "%s: invalid max pwm tx gear read = %d\n", |
| __func__, pwr_info->gear_tx); |
| return -EINVAL; |
| } |
| pwr_info->pwr_tx = SLOW_MODE; |
| } |
| |
| hba->max_pwr_info.is_valid = true; |
| return 0; |
| } |
| |
| static int ufshcd_change_power_mode(struct ufs_hba *hba, |
| struct ufs_pa_layer_attr *pwr_mode) |
| { |
| int ret; |
| |
| /* if already configured to the requested pwr_mode */ |
| if (pwr_mode->gear_rx == hba->pwr_info.gear_rx && |
| pwr_mode->gear_tx == hba->pwr_info.gear_tx && |
| pwr_mode->lane_rx == hba->pwr_info.lane_rx && |
| pwr_mode->lane_tx == hba->pwr_info.lane_tx && |
| pwr_mode->pwr_rx == hba->pwr_info.pwr_rx && |
| pwr_mode->pwr_tx == hba->pwr_info.pwr_tx && |
| pwr_mode->hs_rate == hba->pwr_info.hs_rate) { |
| dev_dbg(hba->dev, "%s: power already configured\n", __func__); |
| return 0; |
| } |
| |
| /* |
| * Configure attributes for power mode change with below. |
| * - PA_RXGEAR, PA_ACTIVERXDATALANES, PA_RXTERMINATION, |
| * - PA_TXGEAR, PA_ACTIVETXDATALANES, PA_TXTERMINATION, |
| * - PA_HSSERIES |
| */ |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXGEAR), pwr_mode->gear_rx); |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVERXDATALANES), |
| pwr_mode->lane_rx); |
| if (pwr_mode->pwr_rx == FASTAUTO_MODE || pwr_mode->pwr_rx == FAST_MODE) |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), TRUE); |
| else |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_RXTERMINATION), FALSE); |
| |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXGEAR), pwr_mode->gear_tx); |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_ACTIVETXDATALANES), |
| pwr_mode->lane_tx); |
| if (pwr_mode->pwr_tx == FASTAUTO_MODE || pwr_mode->pwr_tx == FAST_MODE) |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), TRUE); |
| else |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_TXTERMINATION), FALSE); |
| |
| if (pwr_mode->pwr_rx == FASTAUTO_MODE || |
| pwr_mode->pwr_tx == FASTAUTO_MODE || |
| pwr_mode->pwr_rx == FAST_MODE || |
| pwr_mode->pwr_tx == FAST_MODE) |
| ufshcd_dme_set(hba, UIC_ARG_MIB(PA_HSSERIES), |
| pwr_mode->hs_rate); |
| |
| ret = ufshcd_uic_change_pwr_mode(hba, pwr_mode->pwr_rx << 4 | |
| pwr_mode->pwr_tx); |
| |
| if (ret) { |
| dev_err(hba->dev, |
| "%s: power mode change failed %d\n", __func__, ret); |
| |
| return ret; |
| } |
| |
| /* Copy new Power Mode to power info */ |
| memcpy(&hba->pwr_info, pwr_mode, sizeof(struct ufs_pa_layer_attr)); |
| |
| return ret; |
| } |
| |
| /** |
| * ufshcd_verify_dev_init() - Verify device initialization |
| * |
| */ |
| static int ufshcd_verify_dev_init(struct ufs_hba *hba) |
| { |
| int retries; |
| int err; |
| |
| for (retries = NOP_OUT_RETRIES; retries > 0; retries--) { |
| err = ufshcd_exec_dev_cmd(hba, DEV_CMD_TYPE_NOP, |
| NOP_OUT_TIMEOUT); |
| if (!err || err == -ETIMEDOUT) |
| break; |
| |
| dev_dbg(hba->dev, "%s: error %d retrying\n", __func__, err); |
| } |
| |
| if (err) |
| dev_err(hba->dev, "%s: NOP OUT failed %d\n", __func__, err); |
| |
| return err; |
| } |
| |
| /** |
| * ufshcd_complete_dev_init() - checks device readiness |
| */ |
| static int ufshcd_complete_dev_init(struct ufs_hba *hba) |
| { |
| int i; |
| int err; |
| bool flag_res = 1; |
| |
| err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_SET_FLAG, |
| QUERY_FLAG_IDN_FDEVICEINIT, NULL); |
| if (err) { |
| dev_err(hba->dev, |
| "%s setting fDeviceInit flag failed with error %d\n", |
| __func__, err); |
| goto out; |
| } |
| |
| /* poll for max. 1000 iterations for fDeviceInit flag to clear */ |
| for (i = 0; i < 1000 && !err && flag_res; i++) |
| err = ufshcd_query_flag_retry(hba, UPIU_QUERY_OPCODE_READ_FLAG, |
| QUERY_FLAG_IDN_FDEVICEINIT, |
| &flag_res); |
| |
| if (err) |
| dev_err(hba->dev, |
| "%s reading fDeviceInit flag failed with error %d\n", |
| __func__, err); |
| else if (flag_res) |
| dev_err(hba->dev, |
| "%s fDeviceInit was not cleared by the device\n", |
| __func__); |
| |
| out: |
| return err; |
| } |
| |
| static void ufshcd_def_desc_sizes(struct ufs_hba *hba) |
| { |
| hba->desc_size.dev_desc = QUERY_DESC_DEVICE_DEF_SIZE; |
| hba->desc_size.pwr_desc = QUERY_DESC_POWER_DEF_SIZE; |
| hba->desc_size.interc_desc = QUERY_DESC_INTERCONNECT_DEF_SIZE; |
| hba->desc_size.conf_desc = QUERY_DESC_CONFIGURATION_DEF_SIZE; |
| hba->desc_size.unit_desc = QUERY_DESC_UNIT_DEF_SIZE; |
| hba->desc_size.geom_desc = QUERY_DESC_GEOMETRY_DEF_SIZE; |
| hba->desc_size.hlth_desc = QUERY_DESC_HEALTH_DEF_SIZE; |
| } |
| |
| int ufs_start(struct ufs_hba *hba) |
| { |
| struct ufs_dev_desc card = {0}; |
| int ret; |
| |
| ret = ufshcd_link_startup(hba); |
| if (ret) |
| return ret; |
| |
| ret = ufshcd_verify_dev_init(hba); |
| if (ret) |
| return ret; |
| |
| ret = ufshcd_complete_dev_init(hba); |
| if (ret) |
| return ret; |
| |
| /* Init check for device descriptor sizes */ |
| ufshcd_init_desc_sizes(hba); |
| |
| ret = ufs_get_device_desc(hba, &card); |
| if (ret) { |
| dev_err(hba->dev, "%s: Failed getting device info. err = %d\n", |
| __func__, ret); |
| |
| return ret; |
| } |
| |
| if (ufshcd_get_max_pwr_mode(hba)) { |
| dev_err(hba->dev, |
| "%s: Failed getting max supported power mode\n", |
| __func__); |
| } else { |
| ret = ufshcd_change_power_mode(hba, &hba->max_pwr_info.info); |
| if (ret) { |
| dev_err(hba->dev, "%s: Failed setting power mode, err = %d\n", |
| __func__, ret); |
| |
| return ret; |
| } |
| |
| printf("Device at %s up at:", hba->dev->name); |
| ufshcd_print_pwr_info(hba); |
| } |
| |
| return 0; |
| } |
| |
| int ufshcd_probe(struct udevice *ufs_dev, struct ufs_hba_ops *hba_ops) |
| { |
| struct ufs_hba *hba = dev_get_uclass_priv(ufs_dev); |
| struct scsi_platdata *scsi_plat; |
| struct udevice *scsi_dev; |
| int err; |
| |
| device_find_first_child(ufs_dev, &scsi_dev); |
| if (!scsi_dev) |
| return -ENODEV; |
| |
| scsi_plat = dev_get_uclass_platdata(scsi_dev); |
| scsi_plat->max_id = UFSHCD_MAX_ID; |
| scsi_plat->max_lun = UFS_MAX_LUNS; |
| scsi_plat->max_bytes_per_req = UFS_MAX_BYTES; |
| |
| hba->dev = ufs_dev; |
| hba->ops = hba_ops; |
| hba->mmio_base = (void *)dev_read_addr(ufs_dev); |
| |
| /* Set descriptor lengths to specification defaults */ |
| ufshcd_def_desc_sizes(hba); |
| |
| ufshcd_ops_init(hba); |
| |
| /* Read capabilties registers */ |
| hba->capabilities = ufshcd_readl(hba, REG_CONTROLLER_CAPABILITIES); |
| |
| /* Get UFS version supported by the controller */ |
| hba->version = ufshcd_get_ufs_version(hba); |
| if (hba->version != UFSHCI_VERSION_10 && |
| hba->version != UFSHCI_VERSION_11 && |
| hba->version != UFSHCI_VERSION_20 && |
| hba->version != UFSHCI_VERSION_21) |
| dev_err(hba->dev, "invalid UFS version 0x%x\n", |
| hba->version); |
| |
| /* Get Interrupt bit mask per version */ |
| hba->intr_mask = ufshcd_get_intr_mask(hba); |
| |
| /* Allocate memory for host memory space */ |
| err = ufshcd_memory_alloc(hba); |
| if (err) { |
| dev_err(hba->dev, "Memory allocation failed\n"); |
| return err; |
| } |
| |
| /* Configure Local data structures */ |
| ufshcd_host_memory_configure(hba); |
| |
| /* |
| * In order to avoid any spurious interrupt immediately after |
| * registering UFS controller interrupt handler, clear any pending UFS |
| * interrupt status and disable all the UFS interrupts. |
| */ |
| ufshcd_writel(hba, ufshcd_readl(hba, REG_INTERRUPT_STATUS), |
| REG_INTERRUPT_STATUS); |
| ufshcd_writel(hba, 0, REG_INTERRUPT_ENABLE); |
| |
| err = ufshcd_hba_enable(hba); |
| if (err) { |
| dev_err(hba->dev, "Host controller enable failed\n"); |
| return err; |
| } |
| |
| err = ufs_start(hba); |
| if (err) |
| return err; |
| |
| return 0; |
| } |
| |
| int ufs_scsi_bind(struct udevice *ufs_dev, struct udevice **scsi_devp) |
| { |
| int ret = device_bind_driver(ufs_dev, "ufs_scsi", "ufs_scsi", |
| scsi_devp); |
| |
| return ret; |
| } |
| |
| static struct scsi_ops ufs_ops = { |
| .exec = ufs_scsi_exec, |
| }; |
| |
| int ufs_probe_dev(int index) |
| { |
| struct udevice *dev; |
| |
| return uclass_get_device(UCLASS_UFS, index, &dev); |
| } |
| |
| int ufs_probe(void) |
| { |
| struct udevice *dev; |
| int ret, i; |
| |
| for (i = 0;; i++) { |
| ret = uclass_get_device(UCLASS_UFS, i, &dev); |
| if (ret == -ENODEV) |
| break; |
| } |
| |
| return 0; |
| } |
| |
| U_BOOT_DRIVER(ufs_scsi) = { |
| .id = UCLASS_SCSI, |
| .name = "ufs_scsi", |
| .ops = &ufs_ops, |
| }; |