| /* |
| * ET1011C PHY driver |
| * |
| * Derived from Linux kernel driver by Chaithrika U S |
| * Copyright (C) 2013, Texas Instruments, Incorporated - http://www.ti.com/ |
| * |
| * This program is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of |
| * the License, or (at your option) any later version. |
| * |
| * This program is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| */ |
| #include <config.h> |
| #include <phy.h> |
| |
| #define ET1011C_CONFIG_REG (0x16) |
| #define ET1011C_TX_FIFO_MASK (0x3 << 12) |
| #define ET1011C_TX_FIFO_DEPTH_8 (0x0 << 12) |
| #define ET1011C_TX_FIFO_DEPTH_16 (0x1 << 12) |
| #define ET1011C_INTERFACE_MASK (0x7 << 0) |
| #define ET1011C_GMII_INTERFACE (0x2 << 0) |
| #define ET1011C_SYS_CLK_EN (0x1 << 4) |
| #define ET1011C_TX_CLK_EN (0x1 << 5) |
| |
| #define ET1011C_STATUS_REG (0x1A) |
| #define ET1011C_DUPLEX_STATUS (0x1 << 7) |
| #define ET1011C_SPEED_MASK (0x3 << 8) |
| #define ET1011C_SPEED_1000 (0x2 << 8) |
| #define ET1011C_SPEED_100 (0x1 << 8) |
| #define ET1011C_SPEED_10 (0x0 << 8) |
| |
| static int et1011c_config(struct phy_device *phydev) |
| { |
| int ctl = 0; |
| ctl = phy_read(phydev, MDIO_DEVAD_NONE, MII_BMCR); |
| if (ctl < 0) |
| return ctl; |
| ctl &= ~(BMCR_FULLDPLX | BMCR_SPEED100 | BMCR_SPEED1000 | |
| BMCR_ANENABLE); |
| /* First clear the PHY */ |
| phy_write(phydev, MDIO_DEVAD_NONE, MII_BMCR, ctl | BMCR_RESET); |
| |
| return genphy_config_aneg(phydev); |
| } |
| |
| static int et1011c_parse_status(struct phy_device *phydev) |
| { |
| int mii_reg; |
| int speed; |
| |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_STATUS_REG); |
| |
| if (mii_reg & ET1011C_DUPLEX_STATUS) |
| phydev->duplex = DUPLEX_FULL; |
| else |
| phydev->duplex = DUPLEX_HALF; |
| |
| speed = mii_reg & ET1011C_SPEED_MASK; |
| switch (speed) { |
| case ET1011C_SPEED_1000: |
| phydev->speed = SPEED_1000; |
| mii_reg = phy_read(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG); |
| mii_reg &= ~ET1011C_TX_FIFO_MASK; |
| phy_write(phydev, MDIO_DEVAD_NONE, ET1011C_CONFIG_REG, |
| mii_reg | |
| ET1011C_GMII_INTERFACE | |
| ET1011C_SYS_CLK_EN | |
| #ifdef CONFIG_PHY_ET1011C_TX_CLK_FIX |
| ET1011C_TX_CLK_EN | |
| #endif |
| ET1011C_TX_FIFO_DEPTH_16); |
| break; |
| case ET1011C_SPEED_100: |
| phydev->speed = SPEED_100; |
| break; |
| case ET1011C_SPEED_10: |
| phydev->speed = SPEED_10; |
| break; |
| } |
| |
| return 0; |
| } |
| |
| static int et1011c_startup(struct phy_device *phydev) |
| { |
| genphy_update_link(phydev); |
| et1011c_parse_status(phydev); |
| return 0; |
| } |
| |
| static struct phy_driver et1011c_driver = { |
| .name = "ET1011C", |
| .uid = 0x0282f014, |
| .mask = 0xfffffff0, |
| .features = PHY_GBIT_FEATURES, |
| .config = &et1011c_config, |
| .startup = &et1011c_startup, |
| }; |
| |
| int phy_et1011c_init(void) |
| { |
| phy_register(&et1011c_driver); |
| |
| return 0; |
| } |