| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright 2022 Gateworks Corporation |
| */ |
| |
| /dts-v1/; |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/input/linux-event-codes.h> |
| #include <dt-bindings/leds/common.h> |
| |
| #include "imx8mp.dtsi" |
| |
| / { |
| model = "Gateworks Venice GW74xx i.MX8MP board"; |
| compatible = "gateworks,imx8mp-gw74xx", "fsl,imx8mp"; |
| |
| aliases { |
| ethernet0 = &eqos; |
| ethernet1 = &fec; |
| ethernet2 = &lan1; |
| ethernet3 = &lan2; |
| ethernet4 = &lan3; |
| ethernet5 = &lan4; |
| ethernet6 = &lan5; |
| }; |
| |
| chosen { |
| stdout-path = &uart2; |
| }; |
| |
| memory@40000000 { |
| device_type = "memory"; |
| reg = <0x0 0x40000000 0 0x80000000>; |
| }; |
| |
| gpio-keys { |
| compatible = "gpio-keys"; |
| |
| key-0 { |
| label = "user_pb"; |
| gpios = <&gpio 2 GPIO_ACTIVE_LOW>; |
| linux,code = <BTN_0>; |
| }; |
| |
| key-1 { |
| label = "user_pb1x"; |
| linux,code = <BTN_1>; |
| interrupt-parent = <&gsc>; |
| interrupts = <0>; |
| }; |
| |
| key-2 { |
| label = "key_erased"; |
| linux,code = <BTN_2>; |
| interrupt-parent = <&gsc>; |
| interrupts = <1>; |
| }; |
| |
| key-3 { |
| label = "eeprom_wp"; |
| linux,code = <BTN_3>; |
| interrupt-parent = <&gsc>; |
| interrupts = <2>; |
| }; |
| |
| key-4 { |
| label = "tamper"; |
| linux,code = <BTN_4>; |
| interrupt-parent = <&gsc>; |
| interrupts = <5>; |
| }; |
| |
| key-5 { |
| label = "switch_hold"; |
| linux,code = <BTN_5>; |
| interrupt-parent = <&gsc>; |
| interrupts = <7>; |
| }; |
| }; |
| |
| led-controller { |
| compatible = "gpio-leds"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_gpio_leds>; |
| |
| led-0 { |
| function = LED_FUNCTION_HEARTBEAT; |
| color = <LED_COLOR_ID_GREEN>; |
| gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>; |
| default-state = "on"; |
| linux,default-trigger = "heartbeat"; |
| }; |
| |
| led-1 { |
| function = LED_FUNCTION_STATUS; |
| color = <LED_COLOR_ID_RED>; |
| gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>; |
| default-state = "off"; |
| }; |
| }; |
| |
| pps { |
| compatible = "pps-gpio"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pps>; |
| gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; |
| }; |
| |
| reg_usb2_vbus: regulator-usb2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_usb2>; |
| compatible = "regulator-fixed"; |
| regulator-name = "usb_usb2_vbus"; |
| gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| }; |
| |
| reg_can2_stby: regulator-can2-stby { |
| compatible = "regulator-fixed"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_can>; |
| regulator-name = "can2_stby"; |
| gpio = <&gpio3 19 GPIO_ACTIVE_HIGH>; |
| enable-active-high; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| }; |
| |
| reg_wifi_en: regulator-wifi-en { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_reg_wifi>; |
| compatible = "regulator-fixed"; |
| regulator-name = "wl"; |
| gpio = <&gpio3 9 GPIO_ACTIVE_HIGH>; |
| startup-delay-us = <100>; |
| enable-active-high; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| }; |
| }; |
| |
| /* off-board header */ |
| &ecspi2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_spi2>; |
| cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>; |
| status = "okay"; |
| }; |
| |
| &eqos { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_eqos>; |
| phy-mode = "rgmii-id"; |
| phy-handle = <ðphy0>; |
| status = "okay"; |
| |
| mdio { |
| compatible = "snps,dwmac-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| ethphy0: ethernet-phy@0 { |
| compatible = "ethernet-phy-ieee802.3-c22"; |
| reg = <0x0>; |
| }; |
| }; |
| }; |
| |
| &fec { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_fec>; |
| phy-mode = "rgmii-id"; |
| local-mac-address = [00 00 00 00 00 00]; |
| status = "okay"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| |
| &flexcan2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_flexcan2>; |
| xceiver-supply = <®_can2_stby>; |
| status = "okay"; |
| }; |
| |
| &gpio1 { |
| gpio-line-names = |
| "", "", "", "", "", "", "", "", |
| "", "", "dio0", "", "dio1", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio2 { |
| gpio-line-names = |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "pcie3_wdis#", "", "", "pcie1_wdis@", "pcie2_wdis#", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio3 { |
| gpio-line-names = |
| "m2_gdis#", "", "", "", "", "", "", "m2_rst#", |
| "", "", "", "", "", "", "", "", |
| "m2_off#", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &gpio4 { |
| gpio-line-names = |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "m2_wdis#", "", "", "", |
| "", "", "", "", "", "", "", "uart_rs485"; |
| }; |
| |
| &gpio5 { |
| gpio-line-names = |
| "uart_half", "uart_term", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", "", |
| "", "", "", "", "", "", "", ""; |
| }; |
| |
| &i2c1 { |
| clock-frequency = <100000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c1>; |
| status = "okay"; |
| |
| gsc: gsc@20 { |
| compatible = "gw,gsc"; |
| reg = <0x20>; |
| pinctrl-0 = <&pinctrl_gsc>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <20 IRQ_TYPE_EDGE_FALLING>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| adc { |
| compatible = "gw,gsc-adc"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| channel@6 { |
| gw,mode = <0>; |
| reg = <0x06>; |
| label = "temp"; |
| }; |
| |
| channel@8 { |
| gw,mode = <1>; |
| reg = <0x08>; |
| label = "vdd_bat"; |
| }; |
| |
| channel@82 { |
| gw,mode = <2>; |
| reg = <0x82>; |
| label = "vdd_adc1"; |
| gw,voltage-divider-ohms = <10000 10000>; |
| }; |
| |
| channel@84 { |
| gw,mode = <2>; |
| reg = <0x84>; |
| label = "vdd_adc2"; |
| gw,voltage-divider-ohms = <10000 10000>; |
| }; |
| |
| channel@86 { |
| gw,mode = <2>; |
| reg = <0x86>; |
| label = "vdd_vin"; |
| gw,voltage-divider-ohms = <22100 1000>; |
| }; |
| |
| channel@88 { |
| gw,mode = <2>; |
| reg = <0x88>; |
| label = "vdd_3p3"; |
| gw,voltage-divider-ohms = <10000 10000>; |
| }; |
| |
| channel@8c { |
| gw,mode = <2>; |
| reg = <0x8c>; |
| label = "vdd_2p5"; |
| gw,voltage-divider-ohms = <10000 10000>; |
| }; |
| |
| channel@90 { |
| gw,mode = <2>; |
| reg = <0x90>; |
| label = "vdd_soc"; |
| }; |
| |
| channel@92 { |
| gw,mode = <2>; |
| reg = <0x92>; |
| label = "vdd_arm"; |
| }; |
| |
| channel@98 { |
| gw,mode = <2>; |
| reg = <0x98>; |
| label = "vdd_1p8"; |
| }; |
| |
| channel@9a { |
| gw,mode = <2>; |
| reg = <0x9a>; |
| label = "vdd_1p2"; |
| }; |
| |
| channel@9c { |
| gw,mode = <2>; |
| reg = <0x9c>; |
| label = "vdd_dram"; |
| }; |
| |
| channel@a2 { |
| gw,mode = <2>; |
| reg = <0xa2>; |
| label = "vdd_gsc"; |
| gw,voltage-divider-ohms = <10000 10000>; |
| }; |
| }; |
| }; |
| |
| gpio: gpio@23 { |
| compatible = "nxp,pca9555"; |
| reg = <0x23>; |
| gpio-controller; |
| #gpio-cells = <2>; |
| interrupt-parent = <&gsc>; |
| interrupts = <4>; |
| }; |
| |
| pmic@25 { |
| compatible = "nxp,pca9450c"; |
| reg = <0x25>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_pmic>; |
| interrupt-parent = <&gpio3>; |
| interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| |
| regulators { |
| BUCK1 { |
| regulator-name = "BUCK1"; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <1000000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <3125>; |
| }; |
| |
| BUCK2 { |
| regulator-name = "BUCK2"; |
| regulator-min-microvolt = <720000>; |
| regulator-max-microvolt = <1025000>; |
| regulator-boot-on; |
| regulator-always-on; |
| regulator-ramp-delay = <3125>; |
| nxp,dvs-run-voltage = <950000>; |
| nxp,dvs-standby-voltage = <850000>; |
| }; |
| |
| BUCK4 { |
| regulator-name = "BUCK4"; |
| regulator-min-microvolt = <3000000>; |
| regulator-max-microvolt = <3600000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| BUCK5 { |
| regulator-name = "BUCK5"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <1950000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| BUCK6 { |
| regulator-name = "BUCK6"; |
| regulator-min-microvolt = <1045000>; |
| regulator-max-microvolt = <1155000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| LDO1 { |
| regulator-name = "LDO1"; |
| regulator-min-microvolt = <1650000>; |
| regulator-max-microvolt = <1950000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| LDO3 { |
| regulator-name = "LDO3"; |
| regulator-min-microvolt = <1710000>; |
| regulator-max-microvolt = <1890000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| |
| LDO5 { |
| regulator-name = "LDO5"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-boot-on; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| |
| eeprom@50 { |
| compatible = "atmel,24c02"; |
| reg = <0x50>; |
| pagesize = <16>; |
| }; |
| |
| eeprom@51 { |
| compatible = "atmel,24c02"; |
| reg = <0x51>; |
| pagesize = <16>; |
| }; |
| |
| eeprom@52 { |
| compatible = "atmel,24c02"; |
| reg = <0x52>; |
| pagesize = <16>; |
| }; |
| |
| eeprom@53 { |
| compatible = "atmel,24c02"; |
| reg = <0x53>; |
| pagesize = <16>; |
| }; |
| |
| rtc@68 { |
| compatible = "dallas,ds1672"; |
| reg = <0x68>; |
| }; |
| }; |
| |
| &i2c2 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c2>; |
| status = "okay"; |
| |
| accelerometer@19 { |
| compatible = "st,lis2de12"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_accel>; |
| reg = <0x19>; |
| st,drdy-int-pin = <1>; |
| interrupt-parent = <&gpio1>; |
| interrupts = <7 IRQ_TYPE_LEVEL_LOW>; |
| interrupt-names = "INT1"; |
| }; |
| |
| switch: switch@5f { |
| compatible = "microchip,ksz9897"; |
| reg = <0x5f>; |
| pinctrl-0 = <&pinctrl_ksz>; |
| interrupt-parent = <&gpio4>; |
| interrupts = <29 IRQ_TYPE_EDGE_FALLING>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| lan1: port@0 { |
| reg = <0>; |
| label = "lan1"; |
| local-mac-address = [00 00 00 00 00 00]; |
| phy-handle = <&sw_phy0>; |
| phy-mode = "internal"; |
| }; |
| |
| lan2: port@1 { |
| reg = <1>; |
| label = "lan2"; |
| local-mac-address = [00 00 00 00 00 00]; |
| phy-handle = <&sw_phy1>; |
| phy-mode = "internal"; |
| }; |
| |
| lan3: port@2 { |
| reg = <2>; |
| label = "lan3"; |
| local-mac-address = [00 00 00 00 00 00]; |
| phy-handle = <&sw_phy2>; |
| phy-mode = "internal"; |
| }; |
| |
| lan4: port@3 { |
| reg = <3>; |
| label = "lan4"; |
| local-mac-address = [00 00 00 00 00 00]; |
| phy-handle = <&sw_phy3>; |
| phy-mode = "internal"; |
| }; |
| |
| lan5: port@4 { |
| reg = <4>; |
| label = "lan5"; |
| local-mac-address = [00 00 00 00 00 00]; |
| phy-handle = <&sw_phy4>; |
| phy-mode = "internal"; |
| }; |
| |
| port@6 { |
| reg = <6>; |
| label = "cpu"; |
| ethernet = <&fec>; |
| phy-mode = "rgmii-id"; |
| |
| fixed-link { |
| speed = <1000>; |
| full-duplex; |
| }; |
| }; |
| }; |
| |
| mdios { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| mdio@0 { |
| reg = <0>; |
| compatible = "microchip,ksz-mdio"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| sw_phy0: ethernet-phy@0 { |
| reg = <0x0>; |
| }; |
| |
| sw_phy1: ethernet-phy@1 { |
| reg = <0x1>; |
| }; |
| |
| sw_phy2: ethernet-phy@2 { |
| reg = <0x2>; |
| }; |
| |
| sw_phy3: ethernet-phy@3 { |
| reg = <0x3>; |
| }; |
| |
| sw_phy4: ethernet-phy@4 { |
| reg = <0x4>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| /* off-board header */ |
| &i2c3 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c3>; |
| status = "okay"; |
| }; |
| |
| /* off-board header */ |
| &i2c4 { |
| clock-frequency = <400000>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_i2c4>; |
| status = "okay"; |
| }; |
| |
| /* GPS / off-board header */ |
| &uart1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart1>; |
| status = "okay"; |
| }; |
| |
| /* RS232 console */ |
| &uart2 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart2>; |
| status = "okay"; |
| }; |
| |
| &uart4 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_uart4>; |
| status = "okay"; |
| }; |
| |
| /* USB1 - Type C front panel */ |
| &usb3_phy0 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_usb1>; |
| status = "okay"; |
| }; |
| |
| &usb3_0 { |
| fsl,over-current-active-low; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_0 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| /* USB2 - USB3.0 Hub */ |
| &usb3_phy1 { |
| vbus-supply = <®_usb2_vbus>; |
| status = "okay"; |
| }; |
| |
| &usb3_1 { |
| fsl,permanently-attached; |
| fsl,disable-port-power-control; |
| status = "okay"; |
| }; |
| |
| &usb_dwc3_1 { |
| dr_mode = "host"; |
| status = "okay"; |
| }; |
| |
| /* eMMC */ |
| &usdhc3 { |
| assigned-clocks = <&clk IMX8MP_CLK_USDHC3>; |
| assigned-clock-rates = <400000000>; |
| pinctrl-names = "default", "state_100mhz", "state_200mhz"; |
| pinctrl-0 = <&pinctrl_usdhc3>; |
| pinctrl-1 = <&pinctrl_usdhc3_100mhz>; |
| pinctrl-2 = <&pinctrl_usdhc3_200mhz>; |
| bus-width = <8>; |
| non-removable; |
| status = "okay"; |
| }; |
| |
| &wdog1 { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_wdog>; |
| fsl,ext-reset-output; |
| status = "okay"; |
| }; |
| |
| &iomuxc { |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pinctrl_hog>; |
| |
| pinctrl_hog: hoggrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x40000041 /* DIO0 */ |
| MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11 0x40000041 /* DIO1 */ |
| MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14 0x40000041 /* M2SKT_OFF# */ |
| MX8MP_IOMUXC_SD2_DATA2__GPIO2_IO17 0x40000159 /* PCIE1_WDIS# */ |
| MX8MP_IOMUXC_SD2_DATA3__GPIO2_IO18 0x40000159 /* PCIE2_WDIS# */ |
| MX8MP_IOMUXC_SD2_CMD__GPIO2_IO14 0x40000159 /* PCIE3_WDIS# */ |
| MX8MP_IOMUXC_NAND_DATA00__GPIO3_IO06 0x40000041 /* M2SKT_RST# */ |
| MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18 0x40000159 /* M2SKT_WDIS# */ |
| MX8MP_IOMUXC_NAND_ALE__GPIO3_IO00 0x40000159 /* M2SKT_GDIS# */ |
| MX8MP_IOMUXC_SAI3_TXD__GPIO5_IO01 0x40000104 /* UART_TERM */ |
| MX8MP_IOMUXC_SAI3_TXFS__GPIO4_IO31 0x40000104 /* UART_RS485 */ |
| MX8MP_IOMUXC_SAI3_TXC__GPIO5_IO00 0x40000104 /* UART_HALF */ |
| >; |
| }; |
| |
| pinctrl_accel: accelgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x159 |
| >; |
| }; |
| |
| pinctrl_eqos: eqosgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x3 |
| MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x3 |
| MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x91 |
| MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x91 |
| MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x91 |
| MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x91 |
| MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x91 |
| MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x91 |
| MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x1f |
| MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x1f |
| MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x1f |
| MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x1f |
| MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x1f |
| MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x1f |
| MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30 0x141 /* RST# */ |
| MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28 0x159 /* IRQ# */ |
| >; |
| }; |
| |
| pinctrl_fec: fecgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x91 |
| MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x91 |
| MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x91 |
| MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x91 |
| MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x91 |
| MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x91 |
| MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x1f |
| MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x1f |
| MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x1f |
| MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x1f |
| MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x1f |
| MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x1f |
| MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x141 |
| MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x141 |
| >; |
| }; |
| |
| pinctrl_flexcan2: flexcan2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x154 |
| MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x154 |
| >; |
| }; |
| |
| pinctrl_gsc: gscgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x159 |
| >; |
| }; |
| |
| pinctrl_i2c1: i2c1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001c3 |
| MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_i2c2: i2c2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001c3 |
| MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_i2c3: i2c3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL 0x400001c3 |
| MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_i2c4: i2c4grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001c3 |
| MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001c3 |
| >; |
| }; |
| |
| pinctrl_ksz: kszgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29 0x159 /* IRQ# */ |
| MX8MP_IOMUXC_SAI3_MCLK__GPIO5_IO02 0x141 /* RST# */ |
| >; |
| }; |
| |
| pinctrl_gpio_leds: ledgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD2_DATA0__GPIO2_IO15 0x19 |
| MX8MP_IOMUXC_SD2_DATA1__GPIO2_IO16 0x19 |
| >; |
| }; |
| |
| pinctrl_pmic: pmicgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07 0x141 |
| >; |
| }; |
| |
| pinctrl_pps: ppsgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12 0x141 |
| >; |
| }; |
| |
| pinctrl_reg_can: regcangrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x154 |
| >; |
| }; |
| |
| pinctrl_reg_usb2: regusb2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x141 |
| >; |
| }; |
| |
| pinctrl_reg_wifi: regwifigrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_DATA03__GPIO3_IO09 0x119 |
| >; |
| }; |
| |
| pinctrl_sai2: sai2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC |
| MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00 |
| MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK |
| MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK |
| >; |
| }; |
| |
| pinctrl_spi2: spi2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x82 |
| MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x82 |
| MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x82 |
| MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x140 |
| >; |
| }; |
| |
| pinctrl_uart1: uart1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX 0x140 |
| MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_uart2: uart2grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX 0x140 |
| MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_uart4: uart4grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140 |
| MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140 |
| >; |
| }; |
| |
| pinctrl_usb1: usb1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO13__USB1_OTG_OC 0x140 |
| MX8MP_IOMUXC_GPIO1_IO10__USB1_OTG_ID 0x140 |
| >; |
| }; |
| |
| pinctrl_usdhc1: usdhc1grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK 0x190 |
| MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2 0x1d0 |
| MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3 0x1d0 |
| >; |
| }; |
| |
| pinctrl_usdhc3: usdhc3grp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x190 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d0 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d0 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d0 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d0 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d0 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d0 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x190 |
| >; |
| }; |
| |
| pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x194 |
| >; |
| }; |
| |
| pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x196 |
| MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d6 |
| MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d6 |
| MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d6 |
| MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d6 |
| MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d6 |
| MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d6 |
| MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x196 |
| >; |
| }; |
| |
| pinctrl_wdog: wdoggrp { |
| fsl,pins = < |
| MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x166 |
| >; |
| }; |
| }; |