board/eXalion/eXalion.c - github/trini/u-boot - Gitiles

 /*
  * (C) Copyright 2000-2004
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * (C) Copyright 2002
  * Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
  *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License as
  * published by the Free Software Foundation; either version 2 of
  * the License, or (at your option) any later version.
  *
  * This program is distributed in the hope that it will be useful,
  * but WITHOUT ANY WARRANTY; without even the implied warranty of
  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
  * MA 02111-1307 USA
  */

 #include <common.h>
 #include <mpc824x.h>
 #include <asm/processor.h>
 #include <asm/io.h>
 #include <pci.h>
 #include <ide.h>
 #include <netdev.h>
 #include "piix_pci.h"
 #include "eXalion.h"

 int checkboard (void)
 {
 	ulong busfreq = get_bus_freq (0);
 	char buf[32];

 	printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
 	printf ("Built: %s at %s\n", __DATE__, __TIME__);
 	printf ("Local Bus:  %s MHz\n", strmhz (buf, busfreq));

 	return 0;
 }

 int checkflash (void)
 {
 	printf ("checkflash\n");
 	flash_init ();
 	return (0);
 }

 phys_size_t initdram (int board_type)
 {
 	int i, cnt;
 	volatile uchar *base = CONFIG_SYS_SDRAM_BASE;
 	volatile ulong *addr;
 	ulong save[32];
 	ulong val, ret = 0;

 	for (i = 0, cnt = (CONFIG_SYS_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
 	     cnt >>= 1) {
 		addr = (volatile ulong *) base + cnt;
 		save[i++] = *addr;
 		*addr = ~cnt;
 	}

 	addr = (volatile ulong *) base;
 	save[i] = *addr;
 	*addr = 0;

 	if (*addr != 0) {
 		*addr = save[i];
 		goto Done;
 	}

 	for (cnt = 1; cnt <= CONFIG_SYS_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
 		addr = (volatile ulong *) base + cnt;
 		val = *addr;
 		*addr = save[--i];
 		if (val != ~cnt) {
 			ulong new_bank0_end = cnt * sizeof (long) - 1;
 			ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
 			ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);

 			mear1 = (mear1 & 0xFFFFFF00) |
 				((new_bank0_end & MICR_ADDR_MASK) >>
 				 MICR_ADDR_SHIFT);
 			emear1 = (emear1 & 0xFFFFFF00) |
 				((new_bank0_end & MICR_ADDR_MASK) >>
 				 MICR_EADDR_SHIFT);
 			mpc824x_mpc107_setreg (MEAR1, mear1);
 			mpc824x_mpc107_setreg (EMEAR1, emear1);

 			ret = cnt * sizeof (long);
 			goto Done;
 		}
 	}

 	ret = CONFIG_SYS_MAX_RAM_SIZE;
       Done:
 	return ret;
 }

 int misc_init_r (void)
 {
 	pci_dev_t bdf;
 	u32 val32;
 	u8 val8;

 	puts ("ISA:   ");
 	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_ISA_DEV_ID, 0);
 	if (bdf == -1) {
 		puts ("Unable to find PIIX4 ISA bridge !\n");
 		hang ();
 	}

 	/* set device for normal ISA instead EIO */
 	pci_read_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, &val32);
 	val32 |= 0x00000001;
 	pci_write_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, val32);
 	printf ("PIIX4 ISA bridge (%d,%d,%d)\n", PCI_BUS (bdf),
 		PCI_DEV (bdf), PCI_FUNC (bdf));

 	puts ("ISA:   ");
 	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_IDE_DEV_ID, 0);
 	if (bdf == -1) {
 		puts ("Unable to find PIIX4 IDE controller !\n");
 		hang ();
 	}

 	/* Init BMIBA register  */
 	/* pci_read_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, &val32); */
 	/* val32 |= 0x1000; */
 	/* pci_write_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, val32); */

 	/* Enable BUS master and IO access  */
 	val32 = PCI_COMMAND_MASTER | PCI_COMMAND_IO;
 	pci_write_config_dword (bdf, PCI_COMMAND, val32);

 	/* Set latency  */
 	pci_read_config_byte (bdf, PCI_LATENCY_TIMER, &val8);
 	val8 = 0x40;
 	pci_write_config_byte (bdf, PCI_LATENCY_TIMER, val8);

 	/* Enable Primary ATA/IDE  */
 	pci_read_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, &val32);
 	/* val32 = 0xa307a307; */
 	val32 = 0x00008000;
 	pci_write_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, val32);


 	printf ("PIIX4 IDE controller (%d,%d,%d)\n", PCI_BUS (bdf),
 		PCI_DEV (bdf), PCI_FUNC (bdf));

 	/* Try to get FAT working... */
 	/* fat_register_read(ide_read); */


 	return (0);
 }

 /*
  * Show/Init PCI devices on the specified bus number.
  */

 void pci_eXalion_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
 {
 	unsigned char line;

 	switch (PCI_DEV (dev)) {
 	case 16:
 		line = PCI_INT_A;
 		break;
 	case 17:
 		line = PCI_INT_B;
 		break;
 	case 18:
 		line = PCI_INT_C;
 		break;
 	case 19:
 		line = PCI_INT_D;
 		break;
 #if defined (CONFIG_MPC8245)
 	case 20:
 		line = PCI_INT_A;
 		break;
 	case 21:
 		line = PCI_INT_B;
 		break;
 	case 22:
 		line = PCI_INT_NA;
 		break;
 #endif
 	default:
 		line = PCI_INT_A;
 		break;
 	}
 	pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, line);
 }


 /*
  * Initialize PCI Devices, report devices found.
  */
 #ifndef CONFIG_PCI_PNP
 #if defined (CONFIG_MPC8240)
 static struct pci_config_table pci_eXalion_config_table[] = {
 	{
 	 /* Intel 82559ER ethernet controller */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
 	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
 				     PCI_ENET0_MEMADDR,
 				     PCI_COMMAND_MEMORY |
 				     PCI_COMMAND_MASTER}},
 	{
 	 /* Intel 82371AB PIIX4 PCI to ISA bridge */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
 	 pci_cfgfunc_config_device, {0,
 				     0,
 				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
 	{
 	 /* Intel 82371AB PIIX4 IDE controller */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x01,
 	 pci_cfgfunc_config_device, {0,
 				     0,
 				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
 	{}
 };
 #elif defined (CONFIG_MPC8245)
 static struct pci_config_table pci_eXalion_config_table[] = {
 	{
 	 /* Intel 82559ER ethernet controller */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 17, 0x00,
 	 pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
 				     PCI_ENET0_MEMADDR,
 				     PCI_COMMAND_MEMORY |
 				     PCI_COMMAND_MASTER}},
 	{
 	 /* Intel 82559ER ethernet controller */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
 	 pci_cfgfunc_config_device, {PCI_ENET1_IOADDR,
 				     PCI_ENET1_MEMADDR,
 				     PCI_COMMAND_MEMORY |
 				     PCI_COMMAND_MASTER}},
 	{
 	 /* Broadcom BCM5690 Gigabit switch */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
 	 pci_cfgfunc_config_device, {PCI_ENET2_IOADDR,
 				     PCI_ENET2_MEMADDR,
 				     PCI_COMMAND_MEMORY |
 				     PCI_COMMAND_MASTER}},
 	{
 	 /* Broadcom BCM5690 Gigabit switch */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 21, 0x00,
 	 pci_cfgfunc_config_device, {PCI_ENET3_IOADDR,
 				     PCI_ENET3_MEMADDR,
 				     PCI_COMMAND_MEMORY |
 				     PCI_COMMAND_MASTER}},
 	{
 	 /* Intel 82371AB PIIX4 PCI to ISA bridge */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x00,
 	 pci_cfgfunc_config_device, {0,
 				     0,
 				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
 	{
 	 /* Intel 82371AB PIIX4 IDE controller */
 	 PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x01,
 	 pci_cfgfunc_config_device, {0,
 				     0,
 				     PCI_COMMAND_IO | PCI_COMMAND_MASTER}},
 	{}
 };
 #else
 #error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
 #endif

 #endif /* #ifndef CONFIG_PCI_PNP */

 struct pci_controller hose = {
 #ifndef CONFIG_PCI_PNP
 	config_table:pci_eXalion_config_table,
 	fixup_irq:pci_eXalion_fixup_irq,
 #endif
 };

 void pci_init_board (void)
 {
 	pci_mpc824x_init (&hose);
 }

 int board_eth_init(bd_t *bis)
 {
 	return pci_eth_init(bis);
 }
	/*
	* (C) Copyright 2000-2004
	* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
	*
	* (C) Copyright 2002
	* Torsten Demke, FORCE Computers GmbH. torsten.demke@fci.com
	*
	* See file CREDITS for list of people who contributed to this
	* project.
	*
	* This program is free software; you can redistribute it and/or
	* modify it under the terms of the GNU General Public License as
	* published by the Free Software Foundation; either version 2 of
	* the License, or (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License
	* along with this program; if not, write to the Free Software
	* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
	* MA 02111-1307 USA
	*/

	#include <common.h>
	#include <mpc824x.h>
	#include <asm/processor.h>
	#include <asm/io.h>
	#include <pci.h>
	#include <ide.h>
	#include <netdev.h>
	#include "piix_pci.h"
	#include "eXalion.h"

	int checkboard (void)
	{
	ulong busfreq = get_bus_freq (0);
	char buf[32];

	printf ("Board: eXalion MPC824x - CHRP (MAP B)\n");
	printf ("Built: %s at %s\n", __DATE__, __TIME__);
	printf ("Local Bus: %s MHz\n", strmhz (buf, busfreq));

	return 0;
	}

	int checkflash (void)
	{
	printf ("checkflash\n");
	flash_init ();
	return (0);
	}

	phys_size_t initdram (int board_type)
	{
	int i, cnt;
	volatile uchar *base = CONFIG_SYS_SDRAM_BASE;
	volatile ulong *addr;
	ulong save[32];
	ulong val, ret = 0;

	for (i = 0, cnt = (CONFIG_SYS_MAX_RAM_SIZE / sizeof (long)) >> 1; cnt > 0;
	cnt >>= 1) {
	addr = (volatile ulong *) base + cnt;
	save[i++] = *addr;
	*addr = ~cnt;
	}

	addr = (volatile ulong *) base;
	save[i] = *addr;
	*addr = 0;

	if (*addr != 0) {
	*addr = save[i];
	goto Done;
	}

	for (cnt = 1; cnt <= CONFIG_SYS_MAX_RAM_SIZE / sizeof (long); cnt <<= 1) {
	addr = (volatile ulong *) base + cnt;
	val = *addr;
	*addr = save[--i];
	if (val != ~cnt) {
	ulong new_bank0_end = cnt * sizeof (long) - 1;
	ulong mear1 = mpc824x_mpc107_getreg (MEAR1);
	ulong emear1 = mpc824x_mpc107_getreg (EMEAR1);

	mear1 = (mear1 & 0xFFFFFF00) \|
	((new_bank0_end & MICR_ADDR_MASK) >>
	MICR_ADDR_SHIFT);
	emear1 = (emear1 & 0xFFFFFF00) \|
	((new_bank0_end & MICR_ADDR_MASK) >>
	MICR_EADDR_SHIFT);
	mpc824x_mpc107_setreg (MEAR1, mear1);
	mpc824x_mpc107_setreg (EMEAR1, emear1);

	ret = cnt * sizeof (long);
	goto Done;
	}
	}

	ret = CONFIG_SYS_MAX_RAM_SIZE;
	Done:
	return ret;
	}

	int misc_init_r (void)
	{
	pci_dev_t bdf;
	u32 val32;
	u8 val8;

	puts ("ISA: ");
	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_ISA_DEV_ID, 0);
	if (bdf == -1) {
	puts ("Unable to find PIIX4 ISA bridge !\n");
	hang ();
	}

	/* set device for normal ISA instead EIO */
	pci_read_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, &val32);
	val32 \|= 0x00000001;
	pci_write_config_dword (bdf, PCI_CFG_PIIX4_GENCFG, val32);
	printf ("PIIX4 ISA bridge (%d,%d,%d)\n", PCI_BUS (bdf),
	PCI_DEV (bdf), PCI_FUNC (bdf));

	puts ("ISA: ");
	bdf = pci_find_device (PIIX4_VENDOR_ID, PIIX4_IDE_DEV_ID, 0);
	if (bdf == -1) {
	puts ("Unable to find PIIX4 IDE controller !\n");
	hang ();
	}

	/* Init BMIBA register */
	/* pci_read_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, &val32); */
	/* val32 \|= 0x1000; */
	/* pci_write_config_dword(bdf, PCI_CFG_PIIX4_BMIBA, val32); */

	/* Enable BUS master and IO access */
	val32 = PCI_COMMAND_MASTER \| PCI_COMMAND_IO;
	pci_write_config_dword (bdf, PCI_COMMAND, val32);

	/* Set latency */
	pci_read_config_byte (bdf, PCI_LATENCY_TIMER, &val8);
	val8 = 0x40;
	pci_write_config_byte (bdf, PCI_LATENCY_TIMER, val8);

	/* Enable Primary ATA/IDE */
	pci_read_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, &val32);
	/* val32 = 0xa307a307; */
	val32 = 0x00008000;
	pci_write_config_dword (bdf, PCI_CFG_PIIX4_IDETIM, val32);


	printf ("PIIX4 IDE controller (%d,%d,%d)\n", PCI_BUS (bdf),
	PCI_DEV (bdf), PCI_FUNC (bdf));

	/* Try to get FAT working... */
	/* fat_register_read(ide_read); */


	return (0);
	}

	/*
	* Show/Init PCI devices on the specified bus number.
	*/

	void pci_eXalion_fixup_irq (struct pci_controller *hose, pci_dev_t dev)
	{
	unsigned char line;

	switch (PCI_DEV (dev)) {
	case 16:
	line = PCI_INT_A;
	break;
	case 17:
	line = PCI_INT_B;
	break;
	case 18:
	line = PCI_INT_C;
	break;
	case 19:
	line = PCI_INT_D;
	break;
	#if defined (CONFIG_MPC8245)
	case 20:
	line = PCI_INT_A;
	break;
	case 21:
	line = PCI_INT_B;
	break;
	case 22:
	line = PCI_INT_NA;
	break;
	#endif
	default:
	line = PCI_INT_A;
	break;
	}
	pci_hose_write_config_byte (hose, dev, PCI_INTERRUPT_LINE, line);
	}


	/*
	* Initialize PCI Devices, report devices found.
	*/
	#ifndef CONFIG_PCI_PNP
	#if defined (CONFIG_MPC8240)
	static struct pci_config_table pci_eXalion_config_table[] = {
	{
	/* Intel 82559ER ethernet controller */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
	pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
	PCI_ENET0_MEMADDR,
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER}},
	{
	/* Intel 82371AB PIIX4 PCI to ISA bridge */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
	pci_cfgfunc_config_device, {0,
	0,
	PCI_COMMAND_IO \| PCI_COMMAND_MASTER}},
	{
	/* Intel 82371AB PIIX4 IDE controller */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x01,
	pci_cfgfunc_config_device, {0,
	0,
	PCI_COMMAND_IO \| PCI_COMMAND_MASTER}},
	{}
	};
	#elif defined (CONFIG_MPC8245)
	static struct pci_config_table pci_eXalion_config_table[] = {
	{
	/* Intel 82559ER ethernet controller */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 17, 0x00,
	pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
	PCI_ENET0_MEMADDR,
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER}},
	{
	/* Intel 82559ER ethernet controller */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 18, 0x00,
	pci_cfgfunc_config_device, {PCI_ENET1_IOADDR,
	PCI_ENET1_MEMADDR,
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER}},
	{
	/* Broadcom BCM5690 Gigabit switch */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 20, 0x00,
	pci_cfgfunc_config_device, {PCI_ENET2_IOADDR,
	PCI_ENET2_MEMADDR,
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER}},
	{
	/* Broadcom BCM5690 Gigabit switch */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 21, 0x00,
	pci_cfgfunc_config_device, {PCI_ENET3_IOADDR,
	PCI_ENET3_MEMADDR,
	PCI_COMMAND_MEMORY \|
	PCI_COMMAND_MASTER}},
	{
	/* Intel 82371AB PIIX4 PCI to ISA bridge */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x00,
	pci_cfgfunc_config_device, {0,
	0,
	PCI_COMMAND_IO \| PCI_COMMAND_MASTER}},
	{
	/* Intel 82371AB PIIX4 IDE controller */
	PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, 0x00, 22, 0x01,
	pci_cfgfunc_config_device, {0,
	0,
	PCI_COMMAND_IO \| PCI_COMMAND_MASTER}},
	{}
	};
	#else
	#error Specific type of MPC824x must be defined (i.e. CONFIG_MPC8240)
	#endif

	#endif /* #ifndef CONFIG_PCI_PNP */

	struct pci_controller hose = {
	#ifndef CONFIG_PCI_PNP
	config_table:pci_eXalion_config_table,
	fixup_irq:pci_eXalion_fixup_irq,
	#endif
	};

	void pci_init_board (void)
	{
	pci_mpc824x_init (&hose);
	}

	int board_eth_init(bd_t *bis)
	{
	return pci_eth_init(bis);
	}