| /* |
| * Memory Setup stuff - taken from blob memsetup.S |
| * |
| * Copyright (C) 2009 Samsung Electronics |
| * Kyungmin Park <kyungmin.park@samsung.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <config.h> |
| #include <version.h> |
| #include <asm/arch/cpu.h> |
| #include <asm/arch/clock.h> |
| #include <asm/arch/power.h> |
| |
| /* |
| * Register usages: |
| * |
| * r5 has zero always |
| * r7 has S5PC100 GPIO base, 0xE0300000 |
| * r8 has real GPIO base, 0xE0300000, 0xE0200000 at S5PC100, S5PC110 repectively |
| * r9 has Mobile DDR size, 1 means 1GiB, 2 means 2GiB and so on |
| */ |
| |
| .globl lowlevel_init |
| lowlevel_init: |
| mov r11, lr |
| |
| /* r5 has always zero */ |
| mov r5, #0 |
| |
| ldr r7, =S5PC100_GPIO_BASE |
| ldr r8, =S5PC100_GPIO_BASE |
| /* Read CPU ID */ |
| ldr r2, =S5PC110_PRO_ID |
| ldr r0, [r2] |
| mov r1, #0x00010000 |
| and r0, r0, r1 |
| cmp r0, r5 |
| beq 100f |
| ldr r8, =S5PC110_GPIO_BASE |
| 100: |
| /* Turn on KEY_LED_ON [GPJ4(1)] XMSMWEN */ |
| cmp r7, r8 |
| beq skip_check_didle @ Support C110 only |
| |
| ldr r0, =S5PC110_RST_STAT |
| ldr r1, [r0] |
| and r1, r1, #0x000D0000 |
| cmp r1, #(0x1 << 19) @ DEEPIDLE_WAKEUP |
| beq didle_wakeup |
| cmp r7, r8 |
| |
| skip_check_didle: |
| addeq r0, r8, #0x280 @ S5PC100_GPIO_J4 |
| addne r0, r8, #0x2C0 @ S5PC110_GPIO_J4 |
| ldr r1, [r0, #0x0] @ GPIO_CON_OFFSET |
| bic r1, r1, #(0xf << 4) @ 1 * 4-bit |
| orr r1, r1, #(0x1 << 4) |
| str r1, [r0, #0x0] @ GPIO_CON_OFFSET |
| |
| ldr r1, [r0, #0x4] @ GPIO_DAT_OFFSET |
| bic r1, r1, #(1 << 1) |
| str r1, [r0, #0x4] @ GPIO_DAT_OFFSET |
| |
| /* Don't setup at s5pc100 */ |
| beq 100f |
| |
| /* |
| * Initialize Async Register Setting for EVT1 |
| * Because we are setting EVT1 as the default value of EVT0, |
| * setting EVT0 as well does not make things worse. |
| * Thus, for the simplicity, we set for EVT0, too |
| * |
| * The "Async Registers" are: |
| * 0xE0F0_0000 |
| * 0xE1F0_0000 |
| * 0xF180_0000 |
| * 0xF190_0000 |
| * 0xF1A0_0000 |
| * 0xF1B0_0000 |
| * 0xF1C0_0000 |
| * 0xF1D0_0000 |
| * 0xF1E0_0000 |
| * 0xF1F0_0000 |
| * 0xFAF0_0000 |
| */ |
| ldr r0, =0xe0f00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xe1f00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1800000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1900000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1a00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1b00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1c00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1d00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1e00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xf1f00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| ldr r0, =0xfaf00000 |
| ldr r1, [r0] |
| bic r1, r1, #0x1 |
| str r1, [r0] |
| |
| /* |
| * Diable ABB block to reduce sleep current at low temperature |
| * Note that it's hidden register setup don't modify it |
| */ |
| ldr r0, =0xE010C300 |
| ldr r1, =0x00800000 |
| str r1, [r0] |
| |
| 100: |
| /* IO retension release */ |
| ldreq r0, =S5PC100_OTHERS @ 0xE0108200 |
| ldrne r0, =S5PC110_OTHERS @ 0xE010E000 |
| ldr r1, [r0] |
| ldreq r2, =(1 << 31) @ IO_RET_REL |
| ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) |
| orr r1, r1, r2 |
| /* Do not release retention here for S5PC110 */ |
| streq r1, [r0] |
| |
| /* Disable Watchdog */ |
| ldreq r0, =S5PC100_WATCHDOG_BASE @ 0xEA200000 |
| ldrne r0, =S5PC110_WATCHDOG_BASE @ 0xE2700000 |
| str r5, [r0] |
| |
| /* setting SRAM */ |
| ldreq r0, =S5PC100_SROMC_BASE |
| ldrne r0, =S5PC110_SROMC_BASE |
| ldr r1, =0x9 |
| str r1, [r0] |
| |
| /* S5PC100 has 3 groups of interrupt sources */ |
| ldreq r0, =S5PC100_VIC0_BASE @ 0xE4000000 |
| ldrne r0, =S5PC110_VIC0_BASE @ 0xF2000000 |
| add r1, r0, #0x00100000 |
| add r2, r0, #0x00200000 |
| |
| /* Disable all interrupts (VIC0, VIC1 and VIC2) */ |
| mvn r3, #0x0 |
| str r3, [r0, #0x14] @ INTENCLEAR |
| str r3, [r1, #0x14] @ INTENCLEAR |
| str r3, [r2, #0x14] @ INTENCLEAR |
| |
| /* Set all interrupts as IRQ */ |
| str r5, [r0, #0xc] @ INTSELECT |
| str r5, [r1, #0xc] @ INTSELECT |
| str r5, [r2, #0xc] @ INTSELECT |
| |
| /* Pending Interrupt Clear */ |
| str r5, [r0, #0xf00] @ INTADDRESS |
| str r5, [r1, #0xf00] @ INTADDRESS |
| str r5, [r2, #0xf00] @ INTADDRESS |
| |
| /* for UART */ |
| bl uart_asm_init |
| |
| bl internal_ram_init |
| |
| cmp r7, r8 |
| /* Clear wakeup status register */ |
| ldreq r0, =S5PC100_WAKEUP_STAT |
| ldrne r0, =S5PC110_WAKEUP_STAT |
| ldr r1, [r0] |
| str r1, [r0] |
| |
| /* IO retension release */ |
| ldreq r0, =S5PC100_OTHERS @ 0xE0108200 |
| ldrne r0, =S5PC110_OTHERS @ 0xE010E000 |
| ldr r1, [r0] |
| ldreq r2, =(1 << 31) @ IO_RET_REL |
| ldrne r2, =((1 << 31) | (1 << 30) | (1 << 29) | (1 << 28)) |
| orr r1, r1, r2 |
| str r1, [r0] |
| |
| b 1f |
| |
| didle_wakeup: |
| /* Wait when APLL is locked */ |
| ldr r0, =0xE0100100 @ S5PC110_APLL_CON |
| lockloop: |
| ldr r1, [r0] |
| and r1, r1, #(1 << 29) |
| cmp r1, #(1 << 29) |
| bne lockloop |
| |
| ldr r0, =S5PC110_INFORM0 |
| ldr r1, [r0] |
| mov pc, r1 |
| nop |
| nop |
| nop |
| nop |
| nop |
| |
| 1: |
| mov lr, r11 |
| mov pc, lr |
| |
| /* |
| * system_clock_init: Initialize core clock and bus clock. |
| * void system_clock_init(void) |
| */ |
| system_clock_init: |
| ldr r0, =S5PC110_CLOCK_BASE @ 0xE0100000 |
| |
| /* Check S5PC100 */ |
| cmp r7, r8 |
| bne 110f |
| 100: |
| /* Set Lock Time */ |
| ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 |
| str r1, [r0, #0x000] @ S5PC100_APLL_LOCK |
| str r1, [r0, #0x004] @ S5PC100_MPLL_LOCK |
| str r1, [r0, #0x008] @ S5PC100_EPLL_LOCK |
| str r1, [r0, #0x00C] @ S5PC100_HPLL_LOCK |
| |
| /* S5P_APLL_CON */ |
| ldr r1, =0x81bc0400 @ SDIV 0, PDIV 4, MDIV 444 (1333MHz) |
| str r1, [r0, #0x100] |
| /* S5P_MPLL_CON */ |
| ldr r1, =0x80590201 @ SDIV 1, PDIV 2, MDIV 89 (267MHz) |
| str r1, [r0, #0x104] |
| /* S5P_EPLL_CON */ |
| ldr r1, =0x80870303 @ SDIV 3, PDIV 3, MDIV 135 (67.5MHz) |
| str r1, [r0, #0x108] |
| /* S5P_HPLL_CON */ |
| ldr r1, =0x80600603 @ SDIV 3, PDIV 6, MDIV 96 |
| str r1, [r0, #0x10C] |
| |
| ldr r1, [r0, #0x300] |
| ldr r2, =0x00003fff |
| bic r1, r1, r2 |
| ldr r2, =0x00011301 |
| |
| orr r1, r1, r2 |
| str r1, [r0, #0x300] |
| ldr r1, [r0, #0x304] |
| ldr r2, =0x00011110 |
| orr r1, r1, r2 |
| str r1, [r0, #0x304] |
| ldr r1, =0x00000001 |
| str r1, [r0, #0x308] |
| |
| /* Set Source Clock */ |
| ldr r1, =0x00001111 @ A, M, E, HPLL Muxing |
| str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 |
| |
| b 200f |
| 110: |
| ldr r0, =0xE010C000 @ S5PC110_PWR_CFG |
| |
| /* Set OSC_FREQ value */ |
| ldr r1, =0xf |
| str r1, [r0, #0x100] @ S5PC110_OSC_FREQ |
| |
| /* Set MTC_STABLE value */ |
| ldr r1, =0xffffffff |
| str r1, [r0, #0x110] @ S5PC110_MTC_STABLE |
| |
| /* Set CLAMP_STABLE value */ |
| ldr r1, =0x3ff03ff |
| str r1, [r0, #0x114] @ S5PC110_CLAMP_STABLE |
| |
| ldr r0, =S5PC110_CLOCK_BASE @ 0xE0100000 |
| |
| /* Set Clock divider */ |
| ldr r1, =0x14131330 @ 1:1:4:4, 1:4:5 |
| str r1, [r0, #0x300] |
| ldr r1, =0x11110111 @ UART[3210]: MMC[3210] |
| str r1, [r0, #0x310] |
| |
| /* Set Lock Time */ |
| ldr r1, =0x2cf @ Locktime : 30us |
| str r1, [r0, #0x000] @ S5PC110_APLL_LOCK |
| ldr r1, =0xe10 @ Locktime : 0xe10 = 3600 |
| str r1, [r0, #0x008] @ S5PC110_MPLL_LOCK |
| str r1, [r0, #0x010] @ S5PC110_EPLL_LOCK |
| str r1, [r0, #0x020] @ S5PC110_VPLL_LOCK |
| |
| /* S5PC110_APLL_CON */ |
| ldr r1, =0x80C80601 @ 800MHz |
| str r1, [r0, #0x100] |
| /* S5PC110_MPLL_CON */ |
| ldr r1, =0x829B0C01 @ 667MHz |
| str r1, [r0, #0x108] |
| /* S5PC110_EPLL_CON */ |
| ldr r1, =0x80600602 @ 96MHz VSEL 0 P 6 M 96 S 2 |
| str r1, [r0, #0x110] |
| /* S5PC110_VPLL_CON */ |
| ldr r1, =0x806C0603 @ 54MHz |
| str r1, [r0, #0x120] |
| |
| /* Set Source Clock */ |
| ldr r1, =0x10001111 @ A, M, E, VPLL Muxing |
| str r1, [r0, #0x200] @ S5PC1XX_CLK_SRC0 |
| |
| /* OneDRAM(DMC0) clock setting */ |
| ldr r1, =0x01000000 @ ONEDRAM_SEL[25:24] 1 SCLKMPLL |
| str r1, [r0, #0x218] @ S5PC110_CLK_SRC6 |
| ldr r1, =0x30000000 @ ONEDRAM_RATIO[31:28] 3 + 1 |
| str r1, [r0, #0x318] @ S5PC110_CLK_DIV6 |
| |
| /* XCLKOUT = XUSBXTI 24MHz */ |
| add r2, r0, #0xE000 @ S5PC110_OTHERS |
| ldr r1, [r2] |
| orr r1, r1, #(0x3 << 8) @ CLKOUT[9:8] 3 XUSBXTI |
| str r1, [r2] |
| |
| /* CLK_IP0 */ |
| ldr r1, =0x8fefeeb @ DMC[1:0] PDMA0[3] IMEM[5] |
| str r1, [r0, #0x460] @ S5PC110_CLK_IP0 |
| |
| /* CLK_IP1 */ |
| ldr r1, =0xe9fdf0f9 @ FIMD[0] USBOTG[16] |
| @ NANDXL[24] |
| str r1, [r0, #0x464] @ S5PC110_CLK_IP1 |
| |
| /* CLK_IP2 */ |
| ldr r1, =0xf75f7fc @ CORESIGHT[8] MODEM[9] |
| @ HOSTIF[10] HSMMC0[16] |
| @ HSMMC2[18] VIC[27:24] |
| str r1, [r0, #0x468] @ S5PC110_CLK_IP2 |
| |
| /* CLK_IP3 */ |
| ldr r1, =0x8eff038c @ I2C[8:6] |
| @ SYSTIMER[16] UART0[17] |
| @ UART1[18] UART2[19] |
| @ UART3[20] WDT[22] |
| @ PWM[23] GPIO[26] SYSCON[27] |
| str r1, [r0, #0x46c] @ S5PC110_CLK_IP3 |
| |
| /* CLK_IP4 */ |
| ldr r1, =0xfffffff1 @ CHIP_ID[0] TZPC[8:5] |
| str r1, [r0, #0x470] @ S5PC110_CLK_IP3 |
| |
| 200: |
| /* wait at least 200us to stablize all clock */ |
| mov r2, #0x10000 |
| 1: subs r2, r2, #1 |
| bne 1b |
| |
| mov pc, lr |
| |
| internal_ram_init: |
| ldreq r0, =0xE3800000 |
| ldrne r0, =0xF1500000 |
| ldr r1, =0x0 |
| str r1, [r0] |
| |
| mov pc, lr |
| |
| /* |
| * uart_asm_init: Initialize UART's pins |
| */ |
| uart_asm_init: |
| /* set GPIO to enable UART0-UART4 */ |
| mov r0, r8 |
| ldr r1, =0x22222222 |
| str r1, [r0, #0x0] @ S5PC100_GPIO_A0_OFFSET |
| ldr r1, =0x00002222 |
| str r1, [r0, #0x20] @ S5PC100_GPIO_A1_OFFSET |
| |
| /* Check S5PC100 */ |
| cmp r7, r8 |
| bne 110f |
| |
| /* UART_SEL GPK0[5] at S5PC100 */ |
| add r0, r8, #0x2A0 @ S5PC100_GPIO_K0_OFFSET |
| ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET |
| bic r1, r1, #(0xf << 20) @ 20 = 5 * 4-bit |
| orr r1, r1, #(0x1 << 20) @ Output |
| str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET |
| |
| ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET |
| bic r1, r1, #(0x3 << 10) @ 10 = 5 * 2-bit |
| orr r1, r1, #(0x2 << 10) @ Pull-up enabled |
| str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET |
| |
| ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET |
| orr r1, r1, #(1 << 5) @ 5 = 5 * 1-bit |
| str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET |
| |
| b 200f |
| 110: |
| /* |
| * Note that the following address |
| * 0xE020'0360 is reserved address at S5PC100 |
| */ |
| /* UART_SEL MP0_5[7] at S5PC110 */ |
| add r0, r8, #0x360 @ S5PC110_GPIO_MP0_5_OFFSET |
| ldr r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET |
| bic r1, r1, #(0xf << 28) @ 28 = 7 * 4-bit |
| orr r1, r1, #(0x1 << 28) @ Output |
| str r1, [r0, #0x0] @ S5PC1XX_GPIO_CON_OFFSET |
| |
| ldr r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET |
| bic r1, r1, #(0x3 << 14) @ 14 = 7 * 2-bit |
| orr r1, r1, #(0x2 << 14) @ Pull-up enabled |
| str r1, [r0, #0x8] @ S5PC1XX_GPIO_PULL_OFFSET |
| |
| ldr r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET |
| orr r1, r1, #(1 << 7) @ 7 = 7 * 1-bit |
| str r1, [r0, #0x4] @ S5PC1XX_GPIO_DAT_OFFSET |
| 200: |
| mov pc, lr |