| /* |
| * [origin: Linux kernel drivers/watchdog/at91sam9_wdt.c] |
| * |
| * Watchdog driver for Atmel AT91SAM9x processors. |
| * |
| * Copyright (C) 2008 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> |
| * Copyright (C) 2008 Renaud CERRATO r.cerrato@til-technologies.fr |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| /* |
| * The Watchdog Timer Mode Register can be only written to once. If the |
| * timeout need to be set from U-Boot, be sure that the bootstrap doesn't |
| * write to this register. Inform Linux to it too |
| */ |
| |
| #include <common.h> |
| #include <watchdog.h> |
| #include <asm/arch/hardware.h> |
| #include <asm/io.h> |
| #include <asm/arch/at91_wdt.h> |
| |
| /* |
| * AT91SAM9 watchdog runs a 12bit counter @ 256Hz, |
| * use this to convert a watchdog |
| * value from/to milliseconds. |
| */ |
| #define ms_to_ticks(t) (((t << 8) / 1000) - 1) |
| #define ticks_to_ms(t) (((t + 1) * 1000) >> 8) |
| |
| /* Hardware timeout in seconds */ |
| #if !defined(CONFIG_AT91_HW_WDT_TIMEOUT) |
| #define WDT_HW_TIMEOUT 2 |
| #else |
| #define WDT_HW_TIMEOUT CONFIG_AT91_HW_WDT_TIMEOUT |
| #endif |
| |
| /* |
| * Set the watchdog time interval in 1/256Hz (write-once) |
| * Counter is 12 bit. |
| */ |
| static int at91_wdt_settimeout(unsigned int timeout) |
| { |
| unsigned int reg; |
| at91_wdt_t *wd = (at91_wdt_t *) ATMEL_BASE_WDT; |
| |
| /* Check if disabled */ |
| if (readl(&wd->mr) & AT91_WDT_MR_WDDIS) { |
| printf("sorry, watchdog is disabled\n"); |
| return -1; |
| } |
| |
| /* |
| * All counting occurs at SLOW_CLOCK / 128 = 256 Hz |
| * |
| * Since WDV is a 12-bit counter, the maximum period is |
| * 4096 / 256 = 16 seconds. |
| */ |
| |
| reg = AT91_WDT_MR_WDRSTEN /* causes watchdog reset */ |
| | AT91_WDT_MR_WDDBGHLT /* disabled in debug mode */ |
| | AT91_WDT_MR_WDD(0xfff) /* restart at any time */ |
| | AT91_WDT_MR_WDV(timeout); /* timer value */ |
| |
| writel(reg, &wd->mr); |
| |
| return 0; |
| } |
| |
| void hw_watchdog_reset(void) |
| { |
| at91_wdt_t *wd = (at91_wdt_t *) ATMEL_BASE_WDT; |
| writel(AT91_WDT_CR_WDRSTT | AT91_WDT_CR_KEY, &wd->cr); |
| } |
| |
| void hw_watchdog_init(void) |
| { |
| /* 16 seconds timer, resets enabled */ |
| at91_wdt_settimeout(ms_to_ticks(WDT_HW_TIMEOUT * 1000)); |
| } |