| /* |
| * Copyright (c) 2011 The Chromium OS Authors. |
| * |
| * Patched for AX88772B by Antmicro Ltd <www.antmicro.com> |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <dm.h> |
| #include <usb.h> |
| #include <malloc.h> |
| #include <linux/mii.h> |
| #include "usb_ether.h" |
| |
| /* ASIX AX8817X based USB 2.0 Ethernet Devices */ |
| |
| #define AX_CMD_SET_SW_MII 0x06 |
| #define AX_CMD_READ_MII_REG 0x07 |
| #define AX_CMD_WRITE_MII_REG 0x08 |
| #define AX_CMD_SET_HW_MII 0x0a |
| #define AX_CMD_READ_EEPROM 0x0b |
| #define AX_CMD_READ_RX_CTL 0x0f |
| #define AX_CMD_WRITE_RX_CTL 0x10 |
| #define AX_CMD_WRITE_IPG0 0x12 |
| #define AX_CMD_READ_NODE_ID 0x13 |
| #define AX_CMD_WRITE_NODE_ID 0x14 |
| #define AX_CMD_READ_PHY_ID 0x19 |
| #define AX_CMD_WRITE_MEDIUM_MODE 0x1b |
| #define AX_CMD_WRITE_GPIOS 0x1f |
| #define AX_CMD_SW_RESET 0x20 |
| #define AX_CMD_SW_PHY_SELECT 0x22 |
| |
| #define AX_SWRESET_CLEAR 0x00 |
| #define AX_SWRESET_PRTE 0x04 |
| #define AX_SWRESET_PRL 0x08 |
| #define AX_SWRESET_IPRL 0x20 |
| #define AX_SWRESET_IPPD 0x40 |
| |
| #define AX88772_IPG0_DEFAULT 0x15 |
| #define AX88772_IPG1_DEFAULT 0x0c |
| #define AX88772_IPG2_DEFAULT 0x12 |
| |
| /* AX88772 & AX88178 Medium Mode Register */ |
| #define AX_MEDIUM_PF 0x0080 |
| #define AX_MEDIUM_JFE 0x0040 |
| #define AX_MEDIUM_TFC 0x0020 |
| #define AX_MEDIUM_RFC 0x0010 |
| #define AX_MEDIUM_ENCK 0x0008 |
| #define AX_MEDIUM_AC 0x0004 |
| #define AX_MEDIUM_FD 0x0002 |
| #define AX_MEDIUM_GM 0x0001 |
| #define AX_MEDIUM_SM 0x1000 |
| #define AX_MEDIUM_SBP 0x0800 |
| #define AX_MEDIUM_PS 0x0200 |
| #define AX_MEDIUM_RE 0x0100 |
| |
| #define AX88178_MEDIUM_DEFAULT \ |
| (AX_MEDIUM_PS | AX_MEDIUM_FD | AX_MEDIUM_AC | \ |
| AX_MEDIUM_RFC | AX_MEDIUM_TFC | AX_MEDIUM_JFE | \ |
| AX_MEDIUM_RE) |
| |
| #define AX88772_MEDIUM_DEFAULT \ |
| (AX_MEDIUM_FD | AX_MEDIUM_RFC | \ |
| AX_MEDIUM_TFC | AX_MEDIUM_PS | \ |
| AX_MEDIUM_AC | AX_MEDIUM_RE) |
| |
| /* AX88772 & AX88178 RX_CTL values */ |
| #define AX_RX_CTL_RH2M 0x0200 /* 32-bit aligned RX IP header */ |
| #define AX_RX_CTL_RH1M 0x0100 /* Enable RX header format type 1 */ |
| #define AX_RX_CTL_SO 0x0080 |
| #define AX_RX_CTL_AB 0x0008 |
| #define AX_RX_HEADER_DEFAULT (AX_RX_CTL_RH1M | AX_RX_CTL_RH2M) |
| |
| #define AX_DEFAULT_RX_CTL \ |
| (AX_RX_CTL_SO | AX_RX_CTL_AB) |
| |
| /* GPIO 2 toggles */ |
| #define AX_GPIO_GPO2EN 0x10 /* GPIO2 Output enable */ |
| #define AX_GPIO_GPO_2 0x20 /* GPIO2 Output value */ |
| #define AX_GPIO_RSE 0x80 /* Reload serial EEPROM */ |
| |
| /* local defines */ |
| #define ASIX_BASE_NAME "asx" |
| #define USB_CTRL_SET_TIMEOUT 5000 |
| #define USB_CTRL_GET_TIMEOUT 5000 |
| #define USB_BULK_SEND_TIMEOUT 5000 |
| #define USB_BULK_RECV_TIMEOUT 5000 |
| |
| #define AX_RX_URB_SIZE 2048 |
| #define PHY_CONNECT_TIMEOUT 5000 |
| |
| /* asix_flags defines */ |
| #define FLAG_NONE 0 |
| #define FLAG_TYPE_AX88172 (1U << 0) |
| #define FLAG_TYPE_AX88772 (1U << 1) |
| #define FLAG_TYPE_AX88772B (1U << 2) |
| #define FLAG_EEPROM_MAC (1U << 3) /* initial mac address in eeprom */ |
| |
| #define ASIX_USB_VENDOR_ID 0x0b95 |
| #define AX88772B_USB_PRODUCT_ID 0x772b |
| |
| /* driver private */ |
| struct asix_private { |
| int flags; |
| #ifdef CONFIG_DM_ETH |
| struct ueth_data ueth; |
| #endif |
| }; |
| |
| #ifndef CONFIG_DM_ETH |
| /* local vars */ |
| static int curr_eth_dev; /* index for name of next device detected */ |
| #endif |
| |
| /* |
| * Asix infrastructure commands |
| */ |
| static int asix_write_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| int len; |
| |
| debug("asix_write_cmd() cmd=0x%02x value=0x%04x index=0x%04x " |
| "size=%d\n", cmd, value, index, size); |
| |
| len = usb_control_msg( |
| dev->pusb_dev, |
| usb_sndctrlpipe(dev->pusb_dev, 0), |
| cmd, |
| USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| data, |
| size, |
| USB_CTRL_SET_TIMEOUT); |
| |
| return len == size ? 0 : -1; |
| } |
| |
| static int asix_read_cmd(struct ueth_data *dev, u8 cmd, u16 value, u16 index, |
| u16 size, void *data) |
| { |
| int len; |
| |
| debug("asix_read_cmd() cmd=0x%02x value=0x%04x index=0x%04x size=%d\n", |
| cmd, value, index, size); |
| |
| len = usb_control_msg( |
| dev->pusb_dev, |
| usb_rcvctrlpipe(dev->pusb_dev, 0), |
| cmd, |
| USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, |
| value, |
| index, |
| data, |
| size, |
| USB_CTRL_GET_TIMEOUT); |
| return len == size ? 0 : -1; |
| } |
| |
| static inline int asix_set_sw_mii(struct ueth_data *dev) |
| { |
| int ret; |
| |
| ret = asix_write_cmd(dev, AX_CMD_SET_SW_MII, 0x0000, 0, 0, NULL); |
| if (ret < 0) |
| debug("Failed to enable software MII access\n"); |
| return ret; |
| } |
| |
| static inline int asix_set_hw_mii(struct ueth_data *dev) |
| { |
| int ret; |
| |
| ret = asix_write_cmd(dev, AX_CMD_SET_HW_MII, 0x0000, 0, 0, NULL); |
| if (ret < 0) |
| debug("Failed to enable hardware MII access\n"); |
| return ret; |
| } |
| |
| static int asix_mdio_read(struct ueth_data *dev, int phy_id, int loc) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1); |
| |
| asix_set_sw_mii(dev); |
| asix_read_cmd(dev, AX_CMD_READ_MII_REG, phy_id, (__u16)loc, 2, res); |
| asix_set_hw_mii(dev); |
| |
| debug("asix_mdio_read() phy_id=0x%02x, loc=0x%02x, returns=0x%04x\n", |
| phy_id, loc, le16_to_cpu(*res)); |
| |
| return le16_to_cpu(*res); |
| } |
| |
| static void |
| asix_mdio_write(struct ueth_data *dev, int phy_id, int loc, int val) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(__le16, res, 1); |
| *res = cpu_to_le16(val); |
| |
| debug("asix_mdio_write() phy_id=0x%02x, loc=0x%02x, val=0x%04x\n", |
| phy_id, loc, val); |
| asix_set_sw_mii(dev); |
| asix_write_cmd(dev, AX_CMD_WRITE_MII_REG, phy_id, (__u16)loc, 2, res); |
| asix_set_hw_mii(dev); |
| } |
| |
| /* |
| * Asix "high level" commands |
| */ |
| static int asix_sw_reset(struct ueth_data *dev, u8 flags) |
| { |
| int ret; |
| |
| ret = asix_write_cmd(dev, AX_CMD_SW_RESET, flags, 0, 0, NULL); |
| if (ret < 0) |
| debug("Failed to send software reset: %02x\n", ret); |
| else |
| udelay(150 * 1000); |
| |
| return ret; |
| } |
| |
| static inline int asix_get_phy_addr(struct ueth_data *dev) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(u8, buf, 2); |
| |
| int ret = asix_read_cmd(dev, AX_CMD_READ_PHY_ID, 0, 0, 2, buf); |
| |
| debug("asix_get_phy_addr()\n"); |
| |
| if (ret < 0) { |
| debug("Error reading PHYID register: %02x\n", ret); |
| goto out; |
| } |
| debug("asix_get_phy_addr() returning 0x%02x%02x\n", buf[0], buf[1]); |
| ret = buf[1]; |
| |
| out: |
| return ret; |
| } |
| |
| static int asix_write_medium_mode(struct ueth_data *dev, u16 mode) |
| { |
| int ret; |
| |
| debug("asix_write_medium_mode() - mode = 0x%04x\n", mode); |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_MEDIUM_MODE, mode, |
| 0, 0, NULL); |
| if (ret < 0) { |
| debug("Failed to write Medium Mode mode to 0x%04x: %02x\n", |
| mode, ret); |
| } |
| return ret; |
| } |
| |
| static u16 asix_read_rx_ctl(struct ueth_data *dev) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(__le16, v, 1); |
| |
| int ret = asix_read_cmd(dev, AX_CMD_READ_RX_CTL, 0, 0, 2, v); |
| |
| if (ret < 0) |
| debug("Error reading RX_CTL register: %02x\n", ret); |
| else |
| ret = le16_to_cpu(*v); |
| return ret; |
| } |
| |
| static int asix_write_rx_ctl(struct ueth_data *dev, u16 mode) |
| { |
| int ret; |
| |
| debug("asix_write_rx_ctl() - mode = 0x%04x\n", mode); |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_RX_CTL, mode, 0, 0, NULL); |
| if (ret < 0) { |
| debug("Failed to write RX_CTL mode to 0x%04x: %02x\n", |
| mode, ret); |
| } |
| return ret; |
| } |
| |
| static int asix_write_gpio(struct ueth_data *dev, u16 value, int sleep) |
| { |
| int ret; |
| |
| debug("asix_write_gpio() - value = 0x%04x\n", value); |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_GPIOS, value, 0, 0, NULL); |
| if (ret < 0) { |
| debug("Failed to write GPIO value 0x%04x: %02x\n", |
| value, ret); |
| } |
| if (sleep) |
| udelay(sleep * 1000); |
| |
| return ret; |
| } |
| |
| static int asix_write_hwaddr_common(struct ueth_data *dev, uint8_t *enetaddr) |
| { |
| int ret; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN); |
| |
| memcpy(buf, enetaddr, ETH_ALEN); |
| |
| ret = asix_write_cmd(dev, AX_CMD_WRITE_NODE_ID, 0, 0, ETH_ALEN, buf); |
| if (ret < 0) |
| debug("Failed to set MAC address: %02x\n", ret); |
| |
| return ret; |
| } |
| |
| /* |
| * mii commands |
| */ |
| |
| /* |
| * mii_nway_restart - restart NWay (autonegotiation) for this interface |
| * |
| * Returns 0 on success, negative on error. |
| */ |
| static int mii_nway_restart(struct ueth_data *dev) |
| { |
| int bmcr; |
| int r = -1; |
| |
| /* if autoneg is off, it's an error */ |
| bmcr = asix_mdio_read(dev, dev->phy_id, MII_BMCR); |
| |
| if (bmcr & BMCR_ANENABLE) { |
| bmcr |= BMCR_ANRESTART; |
| asix_mdio_write(dev, dev->phy_id, MII_BMCR, bmcr); |
| r = 0; |
| } |
| |
| return r; |
| } |
| |
| static int asix_read_mac_common(struct ueth_data *dev, |
| struct asix_private *priv, uint8_t *enetaddr) |
| { |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, buf, ETH_ALEN); |
| int i; |
| |
| if (priv->flags & FLAG_EEPROM_MAC) { |
| for (i = 0; i < (ETH_ALEN >> 1); i++) { |
| if (asix_read_cmd(dev, AX_CMD_READ_EEPROM, |
| 0x04 + i, 0, 2, buf) < 0) { |
| debug("Failed to read SROM address 04h.\n"); |
| return -1; |
| } |
| memcpy(enetaddr + i * 2, buf, 2); |
| } |
| } else { |
| if (asix_read_cmd(dev, AX_CMD_READ_NODE_ID, 0, 0, ETH_ALEN, buf) |
| < 0) { |
| debug("Failed to read MAC address.\n"); |
| return -1; |
| } |
| memcpy(enetaddr, buf, ETH_ALEN); |
| } |
| |
| return 0; |
| } |
| |
| static int asix_basic_reset(struct ueth_data *dev) |
| { |
| int embd_phy; |
| u16 rx_ctl; |
| |
| if (asix_write_gpio(dev, |
| AX_GPIO_RSE | AX_GPIO_GPO_2 | AX_GPIO_GPO2EN, 5) < 0) |
| return -1; |
| |
| /* 0x10 is the phy id of the embedded 10/100 ethernet phy */ |
| embd_phy = ((asix_get_phy_addr(dev) & 0x1f) == 0x10 ? 1 : 0); |
| if (asix_write_cmd(dev, AX_CMD_SW_PHY_SELECT, |
| embd_phy, 0, 0, NULL) < 0) { |
| debug("Select PHY #1 failed\n"); |
| return -1; |
| } |
| |
| if (asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL) < 0) |
| return -1; |
| |
| if (asix_sw_reset(dev, AX_SWRESET_CLEAR) < 0) |
| return -1; |
| |
| if (embd_phy) { |
| if (asix_sw_reset(dev, AX_SWRESET_IPRL) < 0) |
| return -1; |
| } else { |
| if (asix_sw_reset(dev, AX_SWRESET_PRTE) < 0) |
| return -1; |
| } |
| |
| rx_ctl = asix_read_rx_ctl(dev); |
| debug("RX_CTL is 0x%04x after software reset\n", rx_ctl); |
| if (asix_write_rx_ctl(dev, 0x0000) < 0) |
| return -1; |
| |
| rx_ctl = asix_read_rx_ctl(dev); |
| debug("RX_CTL is 0x%04x setting to 0x0000\n", rx_ctl); |
| |
| dev->phy_id = asix_get_phy_addr(dev); |
| if (dev->phy_id < 0) |
| debug("Failed to read phy id\n"); |
| |
| asix_mdio_write(dev, dev->phy_id, MII_BMCR, BMCR_RESET); |
| asix_mdio_write(dev, dev->phy_id, MII_ADVERTISE, |
| ADVERTISE_ALL | ADVERTISE_CSMA); |
| mii_nway_restart(dev); |
| |
| if (asix_write_medium_mode(dev, AX88772_MEDIUM_DEFAULT) < 0) |
| return -1; |
| |
| if (asix_write_cmd(dev, AX_CMD_WRITE_IPG0, |
| AX88772_IPG0_DEFAULT | AX88772_IPG1_DEFAULT, |
| AX88772_IPG2_DEFAULT, 0, NULL) < 0) { |
| debug("Write IPG,IPG1,IPG2 failed\n"); |
| return -1; |
| } |
| |
| return 0; |
| } |
| |
| static int asix_init_common(struct ueth_data *dev, uint8_t *enetaddr) |
| { |
| int timeout = 0; |
| #define TIMEOUT_RESOLUTION 50 /* ms */ |
| int link_detected; |
| u32 ctl = AX_DEFAULT_RX_CTL; |
| |
| debug("** %s()\n", __func__); |
| |
| if ((dev->pusb_dev->descriptor.idVendor == ASIX_USB_VENDOR_ID) && |
| (dev->pusb_dev->descriptor.idProduct == AX88772B_USB_PRODUCT_ID)) |
| ctl |= AX_RX_HEADER_DEFAULT; |
| |
| if (asix_write_rx_ctl(dev, ctl) < 0) |
| goto out_err; |
| |
| if (asix_write_hwaddr_common(dev, enetaddr) < 0) |
| goto out_err; |
| |
| do { |
| link_detected = asix_mdio_read(dev, dev->phy_id, MII_BMSR) & |
| BMSR_LSTATUS; |
| if (!link_detected) { |
| if (timeout == 0) |
| printf("Waiting for Ethernet connection... "); |
| udelay(TIMEOUT_RESOLUTION * 1000); |
| timeout += TIMEOUT_RESOLUTION; |
| } |
| } while (!link_detected && timeout < PHY_CONNECT_TIMEOUT); |
| if (link_detected) { |
| if (timeout != 0) |
| printf("done.\n"); |
| } else { |
| printf("unable to connect.\n"); |
| goto out_err; |
| } |
| |
| /* |
| * Wait some more to avoid timeout on first transfer |
| * (e.g. EHCI timed out on TD - token=0x8008d80) |
| */ |
| mdelay(25); |
| |
| return 0; |
| out_err: |
| return -1; |
| } |
| |
| static int asix_send_common(struct ueth_data *dev, void *packet, int length) |
| { |
| int err; |
| u32 packet_len; |
| int actual_len; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, msg, |
| PKTSIZE + sizeof(packet_len)); |
| |
| debug("** %s(), len %d\n", __func__, length); |
| |
| packet_len = (((length) ^ 0x0000ffff) << 16) + (length); |
| cpu_to_le32s(&packet_len); |
| |
| memcpy(msg, &packet_len, sizeof(packet_len)); |
| memcpy(msg + sizeof(packet_len), (void *)packet, length); |
| |
| err = usb_bulk_msg(dev->pusb_dev, |
| usb_sndbulkpipe(dev->pusb_dev, dev->ep_out), |
| (void *)msg, |
| length + sizeof(packet_len), |
| &actual_len, |
| USB_BULK_SEND_TIMEOUT); |
| debug("Tx: len = %zu, actual = %u, err = %d\n", |
| length + sizeof(packet_len), actual_len, err); |
| |
| return err; |
| } |
| |
| #ifndef CONFIG_DM_ETH |
| /* |
| * Asix callbacks |
| */ |
| static int asix_init(struct eth_device *eth, bd_t *bd) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| |
| return asix_init_common(dev, eth->enetaddr); |
| } |
| |
| static int asix_send(struct eth_device *eth, void *packet, int length) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| |
| return asix_send_common(dev, packet, length); |
| } |
| |
| static int asix_recv(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| ALLOC_CACHE_ALIGN_BUFFER(unsigned char, recv_buf, AX_RX_URB_SIZE); |
| unsigned char *buf_ptr; |
| int err; |
| int actual_len; |
| u32 packet_len; |
| |
| debug("** %s()\n", __func__); |
| |
| err = usb_bulk_msg(dev->pusb_dev, |
| usb_rcvbulkpipe(dev->pusb_dev, dev->ep_in), |
| (void *)recv_buf, |
| AX_RX_URB_SIZE, |
| &actual_len, |
| USB_BULK_RECV_TIMEOUT); |
| debug("Rx: len = %u, actual = %u, err = %d\n", AX_RX_URB_SIZE, |
| actual_len, err); |
| if (err != 0) { |
| debug("Rx: failed to receive\n"); |
| return -1; |
| } |
| if (actual_len > AX_RX_URB_SIZE) { |
| debug("Rx: received too many bytes %d\n", actual_len); |
| return -1; |
| } |
| |
| buf_ptr = recv_buf; |
| while (actual_len > 0) { |
| /* |
| * 1st 4 bytes contain the length of the actual data as two |
| * complementary 16-bit words. Extract the length of the data. |
| */ |
| if (actual_len < sizeof(packet_len)) { |
| debug("Rx: incomplete packet length\n"); |
| return -1; |
| } |
| memcpy(&packet_len, buf_ptr, sizeof(packet_len)); |
| le32_to_cpus(&packet_len); |
| if (((~packet_len >> 16) & 0x7ff) != (packet_len & 0x7ff)) { |
| debug("Rx: malformed packet length: %#x (%#x:%#x)\n", |
| packet_len, (~packet_len >> 16) & 0x7ff, |
| packet_len & 0x7ff); |
| return -1; |
| } |
| packet_len = packet_len & 0x7ff; |
| if (packet_len > actual_len - sizeof(packet_len)) { |
| debug("Rx: too large packet: %d\n", packet_len); |
| return -1; |
| } |
| |
| if ((dev->pusb_dev->descriptor.idVendor == |
| ASIX_USB_VENDOR_ID) && |
| (dev->pusb_dev->descriptor.idProduct == |
| AX88772B_USB_PRODUCT_ID)) |
| buf_ptr += 2; |
| |
| /* Notify net stack */ |
| net_process_received_packet(buf_ptr + sizeof(packet_len), |
| packet_len); |
| |
| /* Adjust for next iteration. Packets are padded to 16-bits */ |
| if (packet_len & 1) |
| packet_len++; |
| actual_len -= sizeof(packet_len) + packet_len; |
| buf_ptr += sizeof(packet_len) + packet_len; |
| } |
| |
| return err; |
| } |
| |
| static void asix_halt(struct eth_device *eth) |
| { |
| debug("** %s()\n", __func__); |
| } |
| |
| static int asix_write_hwaddr(struct eth_device *eth) |
| { |
| struct ueth_data *dev = (struct ueth_data *)eth->priv; |
| |
| return asix_write_hwaddr_common(dev, eth->enetaddr); |
| } |
| |
| /* |
| * Asix probing functions |
| */ |
| void asix_eth_before_probe(void) |
| { |
| curr_eth_dev = 0; |
| } |
| |
| struct asix_dongle { |
| unsigned short vendor; |
| unsigned short product; |
| int flags; |
| }; |
| |
| static const struct asix_dongle asix_dongles[] = { |
| { 0x05ac, 0x1402, FLAG_TYPE_AX88772 }, /* Apple USB Ethernet Adapter */ |
| { 0x07d1, 0x3c05, FLAG_TYPE_AX88772 }, /* D-Link DUB-E100 H/W Ver B1 */ |
| { 0x2001, 0x1a02, FLAG_TYPE_AX88772 }, /* D-Link DUB-E100 H/W Ver C1 */ |
| /* Cables-to-Go USB Ethernet Adapter */ |
| { 0x0b95, 0x772a, FLAG_TYPE_AX88772 }, |
| { 0x0b95, 0x7720, FLAG_TYPE_AX88772 }, /* Trendnet TU2-ET100 V3.0R */ |
| { 0x0b95, 0x1720, FLAG_TYPE_AX88172 }, /* SMC */ |
| { 0x0db0, 0xa877, FLAG_TYPE_AX88772 }, /* MSI - ASIX 88772a */ |
| { 0x13b1, 0x0018, FLAG_TYPE_AX88172 }, /* Linksys 200M v2.1 */ |
| { 0x1557, 0x7720, FLAG_TYPE_AX88772 }, /* 0Q0 cable ethernet */ |
| /* DLink DUB-E100 H/W Ver B1 Alternate */ |
| { 0x2001, 0x3c05, FLAG_TYPE_AX88772 }, |
| /* ASIX 88772B */ |
| { 0x0b95, 0x772b, FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC }, |
| { 0x0b95, 0x7e2b, FLAG_TYPE_AX88772B }, |
| { 0x0000, 0x0000, FLAG_NONE } /* END - Do not remove */ |
| }; |
| |
| /* Probe to see if a new device is actually an asix device */ |
| int asix_eth_probe(struct usb_device *dev, unsigned int ifnum, |
| struct ueth_data *ss) |
| { |
| struct usb_interface *iface; |
| struct usb_interface_descriptor *iface_desc; |
| int ep_in_found = 0, ep_out_found = 0; |
| int i; |
| |
| /* let's examine the device now */ |
| iface = &dev->config.if_desc[ifnum]; |
| iface_desc = &dev->config.if_desc[ifnum].desc; |
| |
| for (i = 0; asix_dongles[i].vendor != 0; i++) { |
| if (dev->descriptor.idVendor == asix_dongles[i].vendor && |
| dev->descriptor.idProduct == asix_dongles[i].product) |
| /* Found a supported dongle */ |
| break; |
| } |
| |
| if (asix_dongles[i].vendor == 0) |
| return 0; |
| |
| memset(ss, 0, sizeof(struct ueth_data)); |
| |
| /* At this point, we know we've got a live one */ |
| debug("\n\nUSB Ethernet device detected: %#04x:%#04x\n", |
| dev->descriptor.idVendor, dev->descriptor.idProduct); |
| |
| /* Initialize the ueth_data structure with some useful info */ |
| ss->ifnum = ifnum; |
| ss->pusb_dev = dev; |
| ss->subclass = iface_desc->bInterfaceSubClass; |
| ss->protocol = iface_desc->bInterfaceProtocol; |
| |
| /* alloc driver private */ |
| ss->dev_priv = calloc(1, sizeof(struct asix_private)); |
| if (!ss->dev_priv) |
| return 0; |
| |
| ((struct asix_private *)ss->dev_priv)->flags = asix_dongles[i].flags; |
| |
| /* |
| * We are expecting a minimum of 3 endpoints - in, out (bulk), and |
| * int. We will ignore any others. |
| */ |
| for (i = 0; i < iface_desc->bNumEndpoints; i++) { |
| /* is it an BULK endpoint? */ |
| if ((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_BULK) { |
| u8 ep_addr = iface->ep_desc[i].bEndpointAddress; |
| if (ep_addr & USB_DIR_IN) { |
| if (!ep_in_found) { |
| ss->ep_in = ep_addr & |
| USB_ENDPOINT_NUMBER_MASK; |
| ep_in_found = 1; |
| } |
| } else { |
| if (!ep_out_found) { |
| ss->ep_out = ep_addr & |
| USB_ENDPOINT_NUMBER_MASK; |
| ep_out_found = 1; |
| } |
| } |
| } |
| |
| /* is it an interrupt endpoint? */ |
| if ((iface->ep_desc[i].bmAttributes & |
| USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_INT) { |
| ss->ep_int = iface->ep_desc[i].bEndpointAddress & |
| USB_ENDPOINT_NUMBER_MASK; |
| ss->irqinterval = iface->ep_desc[i].bInterval; |
| } |
| } |
| debug("Endpoints In %d Out %d Int %d\n", |
| ss->ep_in, ss->ep_out, ss->ep_int); |
| |
| /* Do some basic sanity checks, and bail if we find a problem */ |
| if (usb_set_interface(dev, iface_desc->bInterfaceNumber, 0) || |
| !ss->ep_in || !ss->ep_out || !ss->ep_int) { |
| debug("Problems with device\n"); |
| return 0; |
| } |
| dev->privptr = (void *)ss; |
| return 1; |
| } |
| |
| int asix_eth_get_info(struct usb_device *dev, struct ueth_data *ss, |
| struct eth_device *eth) |
| { |
| struct asix_private *priv = (struct asix_private *)ss->dev_priv; |
| |
| if (!eth) { |
| debug("%s: missing parameter.\n", __func__); |
| return 0; |
| } |
| sprintf(eth->name, "%s%d", ASIX_BASE_NAME, curr_eth_dev++); |
| eth->init = asix_init; |
| eth->send = asix_send; |
| eth->recv = asix_recv; |
| eth->halt = asix_halt; |
| if (!(priv->flags & FLAG_TYPE_AX88172)) |
| eth->write_hwaddr = asix_write_hwaddr; |
| eth->priv = ss; |
| |
| if (asix_basic_reset(ss)) |
| return 0; |
| |
| /* Get the MAC address */ |
| if (asix_read_mac_common(ss, priv, eth->enetaddr)) |
| return 0; |
| debug("MAC %pM\n", eth->enetaddr); |
| |
| return 1; |
| } |
| #endif |
| |
| #ifdef CONFIG_DM_ETH |
| static int asix_eth_start(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| struct asix_private *priv = dev_get_priv(dev); |
| |
| return asix_init_common(&priv->ueth, pdata->enetaddr); |
| } |
| |
| void asix_eth_stop(struct udevice *dev) |
| { |
| debug("** %s()\n", __func__); |
| } |
| |
| int asix_eth_send(struct udevice *dev, void *packet, int length) |
| { |
| struct asix_private *priv = dev_get_priv(dev); |
| |
| return asix_send_common(&priv->ueth, packet, length); |
| } |
| |
| int asix_eth_recv(struct udevice *dev, int flags, uchar **packetp) |
| { |
| struct asix_private *priv = dev_get_priv(dev); |
| struct ueth_data *ueth = &priv->ueth; |
| uint8_t *ptr; |
| int ret, len; |
| u32 packet_len; |
| |
| len = usb_ether_get_rx_bytes(ueth, &ptr); |
| debug("%s: first try, len=%d\n", __func__, len); |
| if (!len) { |
| if (!(flags & ETH_RECV_CHECK_DEVICE)) |
| return -EAGAIN; |
| ret = usb_ether_receive(ueth, AX_RX_URB_SIZE); |
| if (ret == -EAGAIN) |
| return ret; |
| |
| len = usb_ether_get_rx_bytes(ueth, &ptr); |
| debug("%s: second try, len=%d\n", __func__, len); |
| } |
| |
| /* |
| * 1st 4 bytes contain the length of the actual data as two |
| * complementary 16-bit words. Extract the length of the data. |
| */ |
| if (len < sizeof(packet_len)) { |
| debug("Rx: incomplete packet length\n"); |
| goto err; |
| } |
| memcpy(&packet_len, ptr, sizeof(packet_len)); |
| le32_to_cpus(&packet_len); |
| if (((~packet_len >> 16) & 0x7ff) != (packet_len & 0x7ff)) { |
| debug("Rx: malformed packet length: %#x (%#x:%#x)\n", |
| packet_len, (~packet_len >> 16) & 0x7ff, |
| packet_len & 0x7ff); |
| goto err; |
| } |
| packet_len = packet_len & 0x7ff; |
| if (packet_len > len - sizeof(packet_len)) { |
| debug("Rx: too large packet: %d\n", packet_len); |
| goto err; |
| } |
| |
| *packetp = ptr + sizeof(packet_len); |
| return packet_len; |
| |
| err: |
| usb_ether_advance_rxbuf(ueth, -1); |
| return -EINVAL; |
| } |
| |
| static int asix_free_pkt(struct udevice *dev, uchar *packet, int packet_len) |
| { |
| struct asix_private *priv = dev_get_priv(dev); |
| |
| if (packet_len & 1) |
| packet_len++; |
| usb_ether_advance_rxbuf(&priv->ueth, sizeof(u32) + packet_len); |
| |
| return 0; |
| } |
| |
| int asix_write_hwaddr(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| struct asix_private *priv = dev_get_priv(dev); |
| |
| if (priv->flags & FLAG_TYPE_AX88172) |
| return -ENOSYS; |
| |
| return asix_write_hwaddr_common(&priv->ueth, pdata->enetaddr); |
| } |
| |
| static int asix_eth_probe(struct udevice *dev) |
| { |
| struct eth_pdata *pdata = dev_get_platdata(dev); |
| struct asix_private *priv = dev_get_priv(dev); |
| struct ueth_data *ss = &priv->ueth; |
| int ret; |
| |
| priv->flags = dev->driver_data; |
| ret = usb_ether_register(dev, ss, AX_RX_URB_SIZE); |
| if (ret) |
| return ret; |
| |
| ret = asix_basic_reset(ss); |
| if (ret) |
| goto err; |
| |
| /* Get the MAC address */ |
| ret = asix_read_mac_common(ss, priv, pdata->enetaddr); |
| if (ret) |
| goto err; |
| debug("MAC %pM\n", pdata->enetaddr); |
| |
| return 0; |
| |
| err: |
| return usb_ether_deregister(ss); |
| } |
| |
| static const struct eth_ops asix_eth_ops = { |
| .start = asix_eth_start, |
| .send = asix_eth_send, |
| .recv = asix_eth_recv, |
| .free_pkt = asix_free_pkt, |
| .stop = asix_eth_stop, |
| .write_hwaddr = asix_write_hwaddr, |
| }; |
| |
| U_BOOT_DRIVER(asix_eth) = { |
| .name = "asix_eth", |
| .id = UCLASS_ETH, |
| .probe = asix_eth_probe, |
| .ops = &asix_eth_ops, |
| .priv_auto_alloc_size = sizeof(struct asix_private), |
| .platdata_auto_alloc_size = sizeof(struct eth_pdata), |
| }; |
| |
| static const struct usb_device_id asix_eth_id_table[] = { |
| /* Apple USB Ethernet Adapter */ |
| { USB_DEVICE(0x05ac, 0x1402), .driver_info = FLAG_TYPE_AX88772 }, |
| /* D-Link DUB-E100 H/W Ver B1 */ |
| { USB_DEVICE(0x07d1, 0x3c05), .driver_info = FLAG_TYPE_AX88772 }, |
| /* D-Link DUB-E100 H/W Ver C1 */ |
| { USB_DEVICE(0x2001, 0x1a02), .driver_info = FLAG_TYPE_AX88772 }, |
| /* Cables-to-Go USB Ethernet Adapter */ |
| { USB_DEVICE(0x0b95, 0x772a), .driver_info = FLAG_TYPE_AX88772 }, |
| /* Trendnet TU2-ET100 V3.0R */ |
| { USB_DEVICE(0x0b95, 0x7720), .driver_info = FLAG_TYPE_AX88772 }, |
| /* SMC */ |
| { USB_DEVICE(0x0b95, 0x1720), .driver_info = FLAG_TYPE_AX88172 }, |
| /* MSI - ASIX 88772a */ |
| { USB_DEVICE(0x0db0, 0xa877), .driver_info = FLAG_TYPE_AX88772 }, |
| /* Linksys 200M v2.1 */ |
| { USB_DEVICE(0x13b1, 0x0018), .driver_info = FLAG_TYPE_AX88172 }, |
| /* 0Q0 cable ethernet */ |
| { USB_DEVICE(0x1557, 0x7720), .driver_info = FLAG_TYPE_AX88772 }, |
| /* DLink DUB-E100 H/W Ver B1 Alternate */ |
| { USB_DEVICE(0x2001, 0x3c05), .driver_info = FLAG_TYPE_AX88772 }, |
| /* ASIX 88772B */ |
| { USB_DEVICE(0x0b95, 0x772b), |
| .driver_info = FLAG_TYPE_AX88772B | FLAG_EEPROM_MAC }, |
| { USB_DEVICE(0x0b95, 0x7e2b), .driver_info = FLAG_TYPE_AX88772B }, |
| { } /* Terminating entry */ |
| }; |
| |
| U_BOOT_USB_DEVICE(asix_eth, asix_eth_id_table); |
| #endif |