arch/arm/mach-socfpga/misc.c - github/trini/u-boot - Gitiles

 /*
  *  Copyright (C) 2012 Altera Corporation <www.altera.com>
  *
  * SPDX-License-Identifier:	GPL-2.0+
  */

 #include <common.h>
 #include <asm/io.h>
 #include <errno.h>
 #include <fdtdec.h>
 #include <libfdt.h>
 #include <altera.h>
 #include <miiphy.h>
 #include <netdev.h>
 #include <watchdog.h>
 #include <asm/arch/reset_manager.h>
 #include <asm/arch/scan_manager.h>
 #include <asm/arch/system_manager.h>
 #include <asm/arch/dwmmc.h>
 #include <asm/arch/nic301.h>
 #include <asm/arch/scu.h>
 #include <asm/pl310.h>

 #include <dt-bindings/reset/altr,rst-mgr.h>

 DECLARE_GLOBAL_DATA_PTR;

 static struct pl310_regs *const pl310 =
 	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
 static struct socfpga_system_manager *sysmgr_regs =
 	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
 static struct socfpga_reset_manager *reset_manager_base =
 	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
 static struct nic301_registers *nic301_regs =
 	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
 static struct scu_registers *scu_regs =
 	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;

 int dram_init(void)
 {
 	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
 	return 0;
 }

 void enable_caches(void)
 {
 #ifndef CONFIG_SYS_ICACHE_OFF
 	icache_enable();
 #endif
 #ifndef CONFIG_SYS_DCACHE_OFF
 	dcache_enable();
 #endif
 }

 /*
  * DesignWare Ethernet initialization
  */
 #ifdef CONFIG_ETH_DESIGNWARE
 static void dwmac_deassert_reset(const unsigned int of_reset_id)
 {
 	u32 physhift, reset;

 	if (of_reset_id == EMAC0_RESET) {
 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
 		reset = SOCFPGA_RESET(EMAC0);
 	} else if (of_reset_id == EMAC1_RESET) {
 		physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
 		reset = SOCFPGA_RESET(EMAC1);
 	} else {
 		printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
 		return;
 	}

 	/* Clearing emac0 PHY interface select to 0 */
 	clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
 		     SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);

 	/* configure to PHY interface select choosed */
 	setbits_le32(&sysmgr_regs->emacgrp_ctrl,
 		     SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift);

 	/* Release the EMAC controller from reset */
 	socfpga_per_reset(reset, 0);
 }

 int cpu_eth_init(bd_t *bis)
 {
 	const void *fdt = gd->fdt_blob;
 	struct fdtdec_phandle_args args;
 	int nodes[2];	/* Max. two GMACs */
 	int ret, count;
 	int i, node;

 	/* Put both GMACs into RESET state. */
 	socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
 	socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);

 	count = fdtdec_find_aliases_for_id(fdt, "ethernet",
 					   COMPAT_ALTERA_SOCFPGA_DWMAC,
 					   nodes, ARRAY_SIZE(nodes));
 	for (i = 0; i < count; i++) {
 		node = nodes[i];
 		if (node <= 0)
 			continue;

 		ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
 						     "#reset-cells", 1, 0,
 						     &args);
 		if (ret || (args.args_count != 1)) {
 			debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
 			continue;
 		}

 		dwmac_deassert_reset(args.args[0]);
 	}

 	return 0;
 }
 #endif

 #ifdef CONFIG_DWMMC
 /*
  * Initializes MMC controllers.
  * to override, implement board_mmc_init()
  */
 int cpu_mmc_init(bd_t *bis)
 {
 /*
  * FIXME: Temporarily define CONFIG_HPS_SDMMC_BUSWIDTH to prevent breakage
  *        due to missing patches in u-boot/master . The upcoming patch will
  *        switch this to OF probing, so this whole block will go away.
  */
 #define CONFIG_HPS_SDMMC_BUSWIDTH	8
 	return socfpga_dwmmc_init(SOCFPGA_SDMMC_ADDRESS,
 				  CONFIG_HPS_SDMMC_BUSWIDTH, 0);
 }
 #endif

 struct {
 	const char	*mode;
 	const char	*name;
 } bsel_str[] = {
 	{ "rsvd", "Reserved", },
 	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
 	{ "nand", "NAND Flash (1.8V)", },
 	{ "nand", "NAND Flash (3.0V)", },
 	{ "sd", "SD/MMC External Transceiver (1.8V)", },
 	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
 	{ "qspi", "QSPI Flash (1.8V)", },
 	{ "qspi", "QSPI Flash (3.0V)", },
 };

 static const struct {
 	const u16	pn;
 	const char	*name;
 	const char	*var;
 } const socfpga_fpga_model[] = {
 	/* Cyclone V E */
 	{ 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
 	{ 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
 	{ 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
 	{ 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
 	{ 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
 	/* Cyclone V GX/GT */
 	{ 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
 	{ 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
 	{ 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
 	{ 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
 	{ 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
 	/* Cyclone V SE/SX/ST */
 	{ 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
 	{ 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
 	{ 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
 	{ 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
 	/* Arria V */
 	{ 0x2d03, "Arria V, D5", "av_d5" },
 };

 static int socfpga_fpga_id(const bool print_id)
 {
 	const u32 altera_mi = 0x6e;
 	const u32 id = scan_mgr_get_fpga_id();

 	const u32 lsb = id & 0x00000001;
 	const u32 mi = (id >> 1) & 0x000007ff;
 	const u32 pn = (id >> 12) & 0x0000ffff;
 	const u32 version = (id >> 28) & 0x0000000f;
 	int i;

 	if ((mi != altera_mi) || (lsb != 1)) {
 		printf("FPGA:  Not Altera chip ID\n");
 		return -EINVAL;
 	}

 	for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
 		if (pn == socfpga_fpga_model[i].pn)
 			break;

 	if (i == ARRAY_SIZE(socfpga_fpga_model)) {
 		printf("FPGA:  Unknown Altera chip, ID 0x%08x\n", id);
 		return -EINVAL;
 	}

 	if (print_id)
 		printf("FPGA:  Altera %s, version 0x%01x\n",
 		       socfpga_fpga_model[i].name, version);
 	return i;
 }

 /*
  * Print CPU information
  */
 #if defined(CONFIG_DISPLAY_CPUINFO)
 int print_cpuinfo(void)
 {
 	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
 	puts("CPU:   Altera SoCFPGA Platform\n");
 	socfpga_fpga_id(1);
 	printf("BOOT:  %s\n", bsel_str[bsel].name);
 	return 0;
 }
 #endif

 #ifdef CONFIG_ARCH_MISC_INIT
 int arch_misc_init(void)
 {
 	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
 	const int fpga_id = socfpga_fpga_id(0);
 	setenv("bootmode", bsel_str[bsel].mode);
 	if (fpga_id >= 0)
 		setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
 	return 0;
 }
 #endif

 #if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
 defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
 int overwrite_console(void)
 {
 	return 0;
 }
 #endif

 #ifdef CONFIG_FPGA
 /*
  * FPGA programming support for SoC FPGA Cyclone V
  */
 static Altera_desc altera_fpga[] = {
 	{
 		/* Family */
 		Altera_SoCFPGA,
 		/* Interface type */
 		fast_passive_parallel,
 		/* No limitation as additional data will be ignored */
 		-1,
 		/* No device function table */
 		NULL,
 		/* Base interface address specified in driver */
 		NULL,
 		/* No cookie implementation */
 		0
 	},
 };

 /* add device descriptor to FPGA device table */
 static void socfpga_fpga_add(void)
 {
 	int i;
 	fpga_init();
 	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
 		fpga_add(fpga_altera, &altera_fpga[i]);
 }
 #else
 static inline void socfpga_fpga_add(void) {}
 #endif

 int arch_cpu_init(void)
 {
 #ifdef CONFIG_HW_WATCHDOG
 	/*
 	 * In case the watchdog is enabled, make sure to (re-)configure it
 	 * so that the defined timeout is valid. Otherwise the SPL (Perloader)
 	 * timeout value is still active which might too short for Linux
 	 * booting.
 	 */
 	hw_watchdog_init();
 #else
 	/*
 	 * If the HW watchdog is NOT enabled, make sure it is not running,
 	 * for example because it was enabled in the preloader. This might
 	 * trigger a watchdog-triggered reboot of Linux kernel later.
 	 * Toggle watchdog reset, so watchdog in not running state.
 	 */
 	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
 	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
 #endif

 	return 0;
 }

 /*
  * Convert all NIC-301 AMBA slaves from secure to non-secure
  */
 static void socfpga_nic301_slave_ns(void)
 {
 	writel(0x1, &nic301_regs->lwhps2fpgaregs);
 	writel(0x1, &nic301_regs->hps2fpgaregs);
 	writel(0x1, &nic301_regs->acp);
 	writel(0x1, &nic301_regs->rom);
 	writel(0x1, &nic301_regs->ocram);
 	writel(0x1, &nic301_regs->sdrdata);
 }

 static uint32_t iswgrp_handoff[8];

 int arch_early_init_r(void)
 {
 	int i;

 	/*
 	 * Write magic value into magic register to unlock support for
 	 * issuing warm reset. The ancient kernel code expects this
 	 * value to be written into the register by the bootloader, so
 	 * to support that old code, we write it here instead of in the
 	 * reset_cpu() function just before reseting the CPU.
 	 */
 	writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);

 	for (i = 0; i < 8; i++)	/* Cache initial SW setting regs */
 		iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);

 	socfpga_bridges_reset(1);
 	socfpga_nic301_slave_ns();

 	/*
 	 * Private components security:
 	 * U-Boot : configure private timer, global timer and cpu component
 	 * access as non secure for kernel stage (as required by Linux)
 	 */
 	setbits_le32(&scu_regs->sacr, 0xfff);

 	/* Configure the L2 controller to make SDRAM start at 0 */
 #ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
 	writel(0x2, &nic301_regs->remap);
 #else
 	writel(0x1, &nic301_regs->remap);	/* remap.mpuzero */
 	writel(0x1, &pl310->pl310_addr_filter_start);
 #endif

 	/* Add device descriptor to FPGA device table */
 	socfpga_fpga_add();

 #ifdef CONFIG_DESIGNWARE_SPI
 	/* Get Designware SPI controller out of reset */
 	socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
 	socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
 #endif

 	return 0;
 }

 static void socfpga_sdram_apply_static_cfg(void)
 {
 	const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
 	const uint32_t applymask = 0x8;
 	uint32_t val = readl(staticcfg) | applymask;

 	/*
 	 * SDRAM staticcfg register specific:
 	 * When applying the register setting, the CPU must not access
 	 * SDRAM. Luckily for us, we can abuse i-cache here to help us
 	 * circumvent the SDRAM access issue. The idea is to make sure
 	 * that the code is in one full i-cache line by branching past
 	 * it and back. Once it is in the i-cache, we execute the core
 	 * of the code and apply the register settings.
 	 *
 	 * The code below uses 7 instructions, while the Cortex-A9 has
 	 * 32-byte cachelines, thus the limit is 8 instructions total.
 	 */
 	asm volatile(
 		".align	5			\n"
 		"	b	2f		\n"
 		"1:	str	%0,	[%1]	\n"
 		"	dsb			\n"
 		"	isb			\n"
 		"	b	3f		\n"
 		"2:	b	1b		\n"
 		"3:	nop			\n"
 	: : "r"(val), "r"(staticcfg) : "memory", "cc");
 }

 int do_bridge(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
 	if (argc != 2)
 		return CMD_RET_USAGE;

 	argv++;

 	switch (*argv[0]) {
 	case 'e':	/* Enable */
 		writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
 		socfpga_sdram_apply_static_cfg();
 		writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
 		writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
 		writel(iswgrp_handoff[1], &nic301_regs->remap);
 		break;
 	case 'd':	/* Disable */
 		writel(0, &sysmgr_regs->fpgaintfgrp_module);
 		writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
 		socfpga_sdram_apply_static_cfg();
 		writel(0, &reset_manager_base->brg_mod_reset);
 		writel(1, &nic301_regs->remap);
 		break;
 	default:
 		return CMD_RET_USAGE;
 	}

 	return 0;
 }

 U_BOOT_CMD(
 	bridge, 2, 1, do_bridge,
 	"SoCFPGA HPS FPGA bridge control",
 	"enable  - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
 	"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
 	""
 );
	/*
	* Copyright (C) 2012 Altera Corporation <www.altera.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <asm/io.h>
	#include <errno.h>
	#include <fdtdec.h>
	#include <libfdt.h>
	#include <altera.h>
	#include <miiphy.h>
	#include <netdev.h>
	#include <watchdog.h>
	#include <asm/arch/reset_manager.h>
	#include <asm/arch/scan_manager.h>
	#include <asm/arch/system_manager.h>
	#include <asm/arch/dwmmc.h>
	#include <asm/arch/nic301.h>
	#include <asm/arch/scu.h>
	#include <asm/pl310.h>

	#include <dt-bindings/reset/altr,rst-mgr.h>

	DECLARE_GLOBAL_DATA_PTR;

	static struct pl310_regs *const pl310 =
	(struct pl310_regs *)CONFIG_SYS_PL310_BASE;
	static struct socfpga_system_manager *sysmgr_regs =
	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
	static struct socfpga_reset_manager *reset_manager_base =
	(struct socfpga_reset_manager *)SOCFPGA_RSTMGR_ADDRESS;
	static struct nic301_registers *nic301_regs =
	(struct nic301_registers *)SOCFPGA_L3REGS_ADDRESS;
	static struct scu_registers *scu_regs =
	(struct scu_registers *)SOCFPGA_MPUSCU_ADDRESS;

	int dram_init(void)
	{
	gd->ram_size = get_ram_size((long *)PHYS_SDRAM_1, PHYS_SDRAM_1_SIZE);
	return 0;
	}

	void enable_caches(void)
	{
	#ifndef CONFIG_SYS_ICACHE_OFF
	icache_enable();
	#endif
	#ifndef CONFIG_SYS_DCACHE_OFF
	dcache_enable();
	#endif
	}

	/*
	* DesignWare Ethernet initialization
	*/
	#ifdef CONFIG_ETH_DESIGNWARE
	static void dwmac_deassert_reset(const unsigned int of_reset_id)
	{
	u32 physhift, reset;

	if (of_reset_id == EMAC0_RESET) {
	physhift = SYSMGR_EMACGRP_CTRL_PHYSEL0_LSB;
	reset = SOCFPGA_RESET(EMAC0);
	} else if (of_reset_id == EMAC1_RESET) {
	physhift = SYSMGR_EMACGRP_CTRL_PHYSEL1_LSB;
	reset = SOCFPGA_RESET(EMAC1);
	} else {
	printf("GMAC: Invalid reset ID (%i)!\n", of_reset_id);
	return;
	}

	/* Clearing emac0 PHY interface select to 0 */
	clrbits_le32(&sysmgr_regs->emacgrp_ctrl,
	SYSMGR_EMACGRP_CTRL_PHYSEL_MASK << physhift);

	/* configure to PHY interface select choosed */
	setbits_le32(&sysmgr_regs->emacgrp_ctrl,
	SYSMGR_EMACGRP_CTRL_PHYSEL_ENUM_RGMII << physhift);

	/* Release the EMAC controller from reset */
	socfpga_per_reset(reset, 0);
	}

	int cpu_eth_init(bd_t *bis)
	{
	const void *fdt = gd->fdt_blob;
	struct fdtdec_phandle_args args;
	int nodes[2]; /* Max. two GMACs */
	int ret, count;
	int i, node;

	/* Put both GMACs into RESET state. */
	socfpga_per_reset(SOCFPGA_RESET(EMAC0), 1);
	socfpga_per_reset(SOCFPGA_RESET(EMAC1), 1);

	count = fdtdec_find_aliases_for_id(fdt, "ethernet",
	COMPAT_ALTERA_SOCFPGA_DWMAC,
	nodes, ARRAY_SIZE(nodes));
	for (i = 0; i < count; i++) {
	node = nodes[i];
	if (node <= 0)
	continue;

	ret = fdtdec_parse_phandle_with_args(fdt, node, "resets",
	"#reset-cells", 1, 0,
	&args);
	if (ret \|\| (args.args_count != 1)) {
	debug("GMAC%i: Failed to parse DT 'resets'!\n", i);
	continue;
	}

	dwmac_deassert_reset(args.args[0]);
	}

	return 0;
	}
	#endif

	#ifdef CONFIG_DWMMC
	/*
	* Initializes MMC controllers.
	* to override, implement board_mmc_init()
	*/
	int cpu_mmc_init(bd_t *bis)
	{
	/*
	* FIXME: Temporarily define CONFIG_HPS_SDMMC_BUSWIDTH to prevent breakage
	* due to missing patches in u-boot/master . The upcoming patch will
	* switch this to OF probing, so this whole block will go away.
	*/
	#define CONFIG_HPS_SDMMC_BUSWIDTH 8
	return socfpga_dwmmc_init(SOCFPGA_SDMMC_ADDRESS,
	CONFIG_HPS_SDMMC_BUSWIDTH, 0);
	}
	#endif

	struct {
	const char *mode;
	const char *name;
	} bsel_str[] = {
	{ "rsvd", "Reserved", },
	{ "fpga", "FPGA (HPS2FPGA Bridge)", },
	{ "nand", "NAND Flash (1.8V)", },
	{ "nand", "NAND Flash (3.0V)", },
	{ "sd", "SD/MMC External Transceiver (1.8V)", },
	{ "sd", "SD/MMC Internal Transceiver (3.0V)", },
	{ "qspi", "QSPI Flash (1.8V)", },
	{ "qspi", "QSPI Flash (3.0V)", },
	};

	static const struct {
	const u16 pn;
	const char *name;
	const char *var;
	} const socfpga_fpga_model[] = {
	/* Cyclone V E */
	{ 0x2b15, "Cyclone V, E/A2", "cv_e_a2" },
	{ 0x2b05, "Cyclone V, E/A4", "cv_e_a4" },
	{ 0x2b22, "Cyclone V, E/A5", "cv_e_a5" },
	{ 0x2b13, "Cyclone V, E/A7", "cv_e_a7" },
	{ 0x2b14, "Cyclone V, E/A9", "cv_e_a9" },
	/* Cyclone V GX/GT */
	{ 0x2b01, "Cyclone V, GX/C3", "cv_gx_c3" },
	{ 0x2b12, "Cyclone V, GX/C4", "cv_gx_c4" },
	{ 0x2b02, "Cyclone V, GX/C5 or GT/D5", "cv_gx_c5" },
	{ 0x2b03, "Cyclone V, GX/C7 or GT/D7", "cv_gx_c7" },
	{ 0x2b04, "Cyclone V, GX/C9 or GT/D9", "cv_gx_c9" },
	/* Cyclone V SE/SX/ST */
	{ 0x2d11, "Cyclone V, SE/A2 or SX/C2", "cv_se_a2" },
	{ 0x2d01, "Cyclone V, SE/A4 or SX/C4", "cv_se_a4" },
	{ 0x2d12, "Cyclone V, SE/A5 or SX/C5 or ST/D5", "cv_se_a5" },
	{ 0x2d02, "Cyclone V, SE/A6 or SX/C6 or ST/D6", "cv_se_a6" },
	/* Arria V */
	{ 0x2d03, "Arria V, D5", "av_d5" },
	};

	static int socfpga_fpga_id(const bool print_id)
	{
	const u32 altera_mi = 0x6e;
	const u32 id = scan_mgr_get_fpga_id();

	const u32 lsb = id & 0x00000001;
	const u32 mi = (id >> 1) & 0x000007ff;
	const u32 pn = (id >> 12) & 0x0000ffff;
	const u32 version = (id >> 28) & 0x0000000f;
	int i;

	if ((mi != altera_mi) \|\| (lsb != 1)) {
	printf("FPGA: Not Altera chip ID\n");
	return -EINVAL;
	}

	for (i = 0; i < ARRAY_SIZE(socfpga_fpga_model); i++)
	if (pn == socfpga_fpga_model[i].pn)
	break;

	if (i == ARRAY_SIZE(socfpga_fpga_model)) {
	printf("FPGA: Unknown Altera chip, ID 0x%08x\n", id);
	return -EINVAL;
	}

	if (print_id)
	printf("FPGA: Altera %s, version 0x%01x\n",
	socfpga_fpga_model[i].name, version);
	return i;
	}

	/*
	* Print CPU information
	*/
	#if defined(CONFIG_DISPLAY_CPUINFO)
	int print_cpuinfo(void)
	{
	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
	puts("CPU: Altera SoCFPGA Platform\n");
	socfpga_fpga_id(1);
	printf("BOOT: %s\n", bsel_str[bsel].name);
	return 0;
	}
	#endif

	#ifdef CONFIG_ARCH_MISC_INIT
	int arch_misc_init(void)
	{
	const u32 bsel = readl(&sysmgr_regs->bootinfo) & 0x7;
	const int fpga_id = socfpga_fpga_id(0);
	setenv("bootmode", bsel_str[bsel].mode);
	if (fpga_id >= 0)
	setenv("fpgatype", socfpga_fpga_model[fpga_id].var);
	return 0;
	}
	#endif

	#if defined(CONFIG_SYS_CONSOLE_IS_IN_ENV) && \
	defined(CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE)
	int overwrite_console(void)
	{
	return 0;
	}
	#endif

	#ifdef CONFIG_FPGA
	/*
	* FPGA programming support for SoC FPGA Cyclone V
	*/
	static Altera_desc altera_fpga[] = {
	{
	/* Family */
	Altera_SoCFPGA,
	/* Interface type */
	fast_passive_parallel,
	/* No limitation as additional data will be ignored */
	-1,
	/* No device function table */
	NULL,
	/* Base interface address specified in driver */
	NULL,
	/* No cookie implementation */
	0
	},
	};

	/* add device descriptor to FPGA device table */
	static void socfpga_fpga_add(void)
	{
	int i;
	fpga_init();
	for (i = 0; i < ARRAY_SIZE(altera_fpga); i++)
	fpga_add(fpga_altera, &altera_fpga[i]);
	}
	#else
	static inline void socfpga_fpga_add(void) {}
	#endif

	int arch_cpu_init(void)
	{
	#ifdef CONFIG_HW_WATCHDOG
	/*
	* In case the watchdog is enabled, make sure to (re-)configure it
	* so that the defined timeout is valid. Otherwise the SPL (Perloader)
	* timeout value is still active which might too short for Linux
	* booting.
	*/
	hw_watchdog_init();
	#else
	/*
	* If the HW watchdog is NOT enabled, make sure it is not running,
	* for example because it was enabled in the preloader. This might
	* trigger a watchdog-triggered reboot of Linux kernel later.
	* Toggle watchdog reset, so watchdog in not running state.
	*/
	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 1);
	socfpga_per_reset(SOCFPGA_RESET(L4WD0), 0);
	#endif

	return 0;
	}

	/*
	* Convert all NIC-301 AMBA slaves from secure to non-secure
	*/
	static void socfpga_nic301_slave_ns(void)
	{
	writel(0x1, &nic301_regs->lwhps2fpgaregs);
	writel(0x1, &nic301_regs->hps2fpgaregs);
	writel(0x1, &nic301_regs->acp);
	writel(0x1, &nic301_regs->rom);
	writel(0x1, &nic301_regs->ocram);
	writel(0x1, &nic301_regs->sdrdata);
	}

	static uint32_t iswgrp_handoff[8];

	int arch_early_init_r(void)
	{
	int i;

	/*
	* Write magic value into magic register to unlock support for
	* issuing warm reset. The ancient kernel code expects this
	* value to be written into the register by the bootloader, so
	* to support that old code, we write it here instead of in the
	* reset_cpu() function just before reseting the CPU.
	*/
	writel(0xae9efebc, &sysmgr_regs->romcodegrp_warmramgrp_enable);

	for (i = 0; i < 8; i++) /* Cache initial SW setting regs */
	iswgrp_handoff[i] = readl(&sysmgr_regs->iswgrp_handoff[i]);

	socfpga_bridges_reset(1);
	socfpga_nic301_slave_ns();

	/*
	* Private components security:
	* U-Boot : configure private timer, global timer and cpu component
	* access as non secure for kernel stage (as required by Linux)
	*/
	setbits_le32(&scu_regs->sacr, 0xfff);

	/* Configure the L2 controller to make SDRAM start at 0 */
	#ifdef CONFIG_SOCFPGA_VIRTUAL_TARGET
	writel(0x2, &nic301_regs->remap);
	#else
	writel(0x1, &nic301_regs->remap); /* remap.mpuzero */
	writel(0x1, &pl310->pl310_addr_filter_start);
	#endif

	/* Add device descriptor to FPGA device table */
	socfpga_fpga_add();

	#ifdef CONFIG_DESIGNWARE_SPI
	/* Get Designware SPI controller out of reset */
	socfpga_per_reset(SOCFPGA_RESET(SPIM0), 0);
	socfpga_per_reset(SOCFPGA_RESET(SPIM1), 0);
	#endif

	return 0;
	}

	static void socfpga_sdram_apply_static_cfg(void)
	{
	const uint32_t staticcfg = SOCFPGA_SDR_ADDRESS + 0x505c;
	const uint32_t applymask = 0x8;
	uint32_t val = readl(staticcfg) \| applymask;

	/*
	* SDRAM staticcfg register specific:
	* When applying the register setting, the CPU must not access
	* SDRAM. Luckily for us, we can abuse i-cache here to help us
	* circumvent the SDRAM access issue. The idea is to make sure
	* that the code is in one full i-cache line by branching past
	* it and back. Once it is in the i-cache, we execute the core
	* of the code and apply the register settings.
	*
	* The code below uses 7 instructions, while the Cortex-A9 has
	* 32-byte cachelines, thus the limit is 8 instructions total.
	*/
	asm volatile(
	".align 5 \n"
	" b 2f \n"
	"1: str %0, [%1] \n"
	" dsb \n"
	" isb \n"
	" b 3f \n"
	"2: b 1b \n"
	"3: nop \n"
	: : "r"(val), "r"(staticcfg) : "memory", "cc");
	}

	int do_bridge(cmd_tbl_t cmdtp, int flag, int argc, char const argv[])
	{
	if (argc != 2)
	return CMD_RET_USAGE;

	argv++;

	switch (*argv[0]) {
	case 'e': /* Enable */
	writel(iswgrp_handoff[2], &sysmgr_regs->fpgaintfgrp_module);
	socfpga_sdram_apply_static_cfg();
	writel(iswgrp_handoff[3], SOCFPGA_SDR_ADDRESS + 0x5080);
	writel(iswgrp_handoff[0], &reset_manager_base->brg_mod_reset);
	writel(iswgrp_handoff[1], &nic301_regs->remap);
	break;
	case 'd': /* Disable */
	writel(0, &sysmgr_regs->fpgaintfgrp_module);
	writel(0, SOCFPGA_SDR_ADDRESS + 0x5080);
	socfpga_sdram_apply_static_cfg();
	writel(0, &reset_manager_base->brg_mod_reset);
	writel(1, &nic301_regs->remap);
	break;
	default:
	return CMD_RET_USAGE;
	}

	return 0;
	}

	U_BOOT_CMD(
	bridge, 2, 1, do_bridge,
	"SoCFPGA HPS FPGA bridge control",
	"enable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
	"bridge disable - Enable HPS-to-FPGA, FPGA-to-HPS, LWHPS-to-FPGA bridges\n"
	""
	);