arch/arm/mach-keystone/clock.c - github/trini/u-boot - Gitiles

 /*
  * Keystone2: pll initialization
  *
  * (C) Copyright 2012-2014
  *     Texas Instruments Incorporated, <www.ti.com>
  *
  * SPDX-License-Identifier:     GPL-2.0+
  */

 #include <common.h>
 #include <asm/arch/clock.h>
 #include <asm/arch/clock_defs.h>

 /* DEV and ARM speed definitions as specified in DEVSPEED register */
 int __weak speeds[DEVSPEED_NUMSPDS] = {
 	SPD1000,
 	SPD1200,
 	SPD1350,
 	SPD1400,
 	SPD1500,
 	SPD1400,
 	SPD1350,
 	SPD1200,
 	SPD1000,
 	SPD800,
 };

 const struct keystone_pll_regs keystone_pll_regs[] = {
 	[CORE_PLL]	= {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
 	[PASS_PLL]	= {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
 	[TETRIS_PLL]	= {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
 	[DDR3A_PLL]	= {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
 	[DDR3B_PLL]	= {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
 };

 static void wait_for_completion(const struct pll_init_data *data)
 {
 	int i;
 	for (i = 0; i < 100; i++) {
 		sdelay(450);
 		if (!(pllctl_reg_read(data->pll, stat) & PLLSTAT_GOSTAT_MASK))
 			break;
 	}
 }

 static inline void bypass_main_pll(const struct pll_init_data *data)
 {
 	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC_MASK |
 			   PLLCTL_PLLEN_MASK);

 	/* 4 cycles of reference clock CLKIN*/
 	sdelay(340);
 }

 static void configure_mult_div(const struct pll_init_data *data)
 {
 	u32 pllm, plld, bwadj;

 	pllm = data->pll_m - 1;
 	plld = (data->pll_d - 1) & CFG_PLLCTL0_PLLD_MASK;

 	/* Program Multiplier */
 	if (data->pll == MAIN_PLL)
 		pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);

 	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
 			CFG_PLLCTL0_PLLM_MASK,
 			pllm << CFG_PLLCTL0_PLLM_SHIFT);

 	/* Program BWADJ */
 	bwadj = (data->pll_m - 1) >> 1; /* Divide pllm by 2 */
 	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
 			CFG_PLLCTL0_BWADJ_MASK,
 			(bwadj << CFG_PLLCTL0_BWADJ_SHIFT) &
 			CFG_PLLCTL0_BWADJ_MASK);
 	bwadj = bwadj >> CFG_PLLCTL0_BWADJ_BITS;
 	clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
 			CFG_PLLCTL1_BWADJ_MASK, bwadj);

 	/* Program Divider */
 	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
 			CFG_PLLCTL0_PLLD_MASK, plld);
 }

 void configure_main_pll(const struct pll_init_data *data)
 {
 	u32 tmp, pllod, i, alnctl_val = 0;
 	u32 *offset;

 	pllod = data->pll_od - 1;

 	/* 100 micro sec for stabilization */
 	sdelay(210000);

 	tmp = pllctl_reg_read(data->pll, secctl);

 	/* Check for Bypass */
 	if (tmp & SECCTL_BYPASS_MASK) {
 		setbits_le32(keystone_pll_regs[data->pll].reg1,
 			     CFG_PLLCTL1_ENSAT_MASK);

 		bypass_main_pll(data);

 		/* Powerdown and powerup Main Pll */
 		pllctl_reg_setbits(data->pll, secctl, SECCTL_BYPASS_MASK);
 		pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
 		/* 5 micro sec */
 		sdelay(21000);

 		pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
 	} else {
 		bypass_main_pll(data);
 	}

 	configure_mult_div(data);

 	/* Program Output Divider */
 	pllctl_reg_rmw(data->pll, secctl, SECCTL_OP_DIV_MASK,
 		       ((pllod << SECCTL_OP_DIV_SHIFT) & SECCTL_OP_DIV_MASK));

 	/* Program PLLDIVn */
 	wait_for_completion(data);
 	for (i = 0; i < PLLDIV_MAX; i++) {
 		if (i < 3)
 			offset = pllctl_reg(data->pll, div1) + i;
 		else
 			offset = pllctl_reg(data->pll, div4) + (i - 3);

 		if (divn_val[i] != -1) {
 			__raw_writel(divn_val[i] | PLLDIV_ENABLE_MASK, offset);
 			alnctl_val |= BIT(i);
 		}
 	}

 	if (alnctl_val) {
 		pllctl_reg_setbits(data->pll, alnctl, alnctl_val);
 		/*
 		 * Set GOSET bit in PLLCMD to initiate the GO operation
 		 * to change the divide
 		 */
 		pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GOSTAT_MASK);
 		wait_for_completion(data);
 	}

 	/* Reset PLL */
 	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
 	sdelay(21000);	/* Wait for a minimum of 7 us*/
 	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
 	sdelay(105000);	/* Wait for PLL Lock time (min 50 us) */

 	/* Enable PLL */
 	pllctl_reg_clrbits(data->pll, secctl, SECCTL_BYPASS_MASK);
 	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN_MASK);
 }

 void configure_secondary_pll(const struct pll_init_data *data)
 {
 	int pllod = data->pll_od - 1;

 	/* Enable Bypass mode */
 	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_ENSAT_MASK);
 	setbits_le32(keystone_pll_regs[data->pll].reg0,
 		     CFG_PLLCTL0_BYPASS_MASK);

 	/* Enable Glitch free bypass for ARM PLL */
 	if (cpu_is_k2hk() && data->pll == TETRIS_PLL)
 		clrbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);

 	configure_mult_div(data);

 	/* Program Output Divider */
 	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
 			CFG_PLLCTL0_CLKOD_MASK,
 			(pllod << CFG_PLLCTL0_CLKOD_SHIFT) &
 			CFG_PLLCTL0_CLKOD_MASK);

 	/* Reset PLL */
 	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
 	/* Wait for 5 micro seconds */
 	sdelay(21000);

 	/* Select the Output of PASS PLL as input to PASS */
 	if (data->pll == PASS_PLL)
 		setbits_le32(keystone_pll_regs[data->pll].reg1,
 			     CFG_PLLCTL1_PAPLL_MASK);

 	/* Select the Output of ARM PLL as input to ARM */
 	if (data->pll == TETRIS_PLL)
 		setbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);

 	clrbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
 	/* Wait for 500 * REFCLK cucles * (PLLD + 1) */
 	sdelay(105000);

 	/* Switch to PLL mode */
 	clrbits_le32(keystone_pll_regs[data->pll].reg0,
 		     CFG_PLLCTL0_BYPASS_MASK);
 }

 void init_pll(const struct pll_init_data *data)
 {
 	if (data->pll == MAIN_PLL)
 		configure_main_pll(data);
 	else
 		configure_secondary_pll(data);

 	/*
 	 * This is required to provide a delay between multiple
 	 * consequent PPL configurations
 	 */
 	sdelay(210000);
 }

 void init_plls(void)
 {
 	struct pll_init_data *data;
 	int pll;

 	for (pll = MAIN_PLL; pll < MAX_PLL_COUNT; pll++) {
 		data = get_pll_init_data(pll);
 		if (data)
 			init_pll(data);
 	}
 }

 static int get_max_speed(u32 val, u32 speed_supported)
 {
 	int speed;

 	/* Left most setbit gives the speed */
 	for (speed = DEVSPEED_NUMSPDS; speed >= 0; speed--) {
 		if ((val & BIT(speed)) & speed_supported)
 			return speeds[speed];
 	}

 	/* If no bit is set, use SPD800 */
 	return SPD800;
 }

 static inline u32 read_efuse_bootrom(void)
 {
 	if (cpu_is_k2hk() && (cpu_revision() <= 1))
 		return __raw_readl(KS2_REV1_DEVSPEED);
 	else
 		return __raw_readl(KS2_EFUSE_BOOTROM);
 }

 int get_max_arm_speed(void)
 {
 	u32 armspeed = read_efuse_bootrom();

 	armspeed = (armspeed & DEVSPEED_ARMSPEED_MASK) >>
 		    DEVSPEED_ARMSPEED_SHIFT;

 	return get_max_speed(armspeed, ARM_SUPPORTED_SPEEDS);
 }

 int get_max_dev_speed(void)
 {
 	u32 devspeed = read_efuse_bootrom();

 	devspeed = (devspeed & DEVSPEED_DEVSPEED_MASK) >>
 		    DEVSPEED_DEVSPEED_SHIFT;

 	return get_max_speed(devspeed, DEV_SUPPORTED_SPEEDS);
 }

 /**
  * pll_freq_get - get pll frequency
  * @pll:	pll identifier
  */
 static unsigned long pll_freq_get(int pll)
 {
 	unsigned long mult = 1, prediv = 1, output_div = 2;
 	unsigned long ret;
 	u32 tmp, reg;

 	if (pll == MAIN_PLL) {
 		ret = external_clk[sys_clk];
 		if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN_MASK) {
 			/* PLL mode */
 			tmp = __raw_readl(KS2_MAINPLLCTL0);
 			prediv = (tmp & CFG_PLLCTL0_PLLD_MASK) + 1;
 			mult = ((tmp & CFG_PLLCTL0_PLLM_HI_MASK) >>
 				CFG_PLLCTL0_PLLM_SHIFT |
 				(pllctl_reg_read(pll, mult) &
 				 PLLM_MULT_LO_MASK)) + 1;
 			output_div = ((pllctl_reg_read(pll, secctl) &
 				       SECCTL_OP_DIV_MASK) >>
 				       SECCTL_OP_DIV_SHIFT) + 1;

 			ret = ret / prediv / output_div * mult;
 		}
 	} else {
 		switch (pll) {
 		case PASS_PLL:
 			ret = external_clk[pa_clk];
 			reg = KS2_PASSPLLCTL0;
 			break;
 		case TETRIS_PLL:
 			ret = external_clk[tetris_clk];
 			reg = KS2_ARMPLLCTL0;
 			break;
 		case DDR3A_PLL:
 			ret = external_clk[ddr3a_clk];
 			reg = KS2_DDR3APLLCTL0;
 			break;
 		case DDR3B_PLL:
 			ret = external_clk[ddr3b_clk];
 			reg = KS2_DDR3BPLLCTL0;
 			break;
 		default:
 			return 0;
 		}

 		tmp = __raw_readl(reg);

 		if (!(tmp & CFG_PLLCTL0_BYPASS_MASK)) {
 			/* Bypass disabled */
 			prediv = (tmp & CFG_PLLCTL0_PLLD_MASK) + 1;
 			mult = ((tmp & CFG_PLLCTL0_PLLM_MASK) >>
 				CFG_PLLCTL0_PLLM_SHIFT) + 1;
 			output_div = ((tmp & CFG_PLLCTL0_CLKOD_MASK) >>
 				      CFG_PLLCTL0_CLKOD_SHIFT) + 1;
 			ret = ((ret / prediv) * mult) / output_div;
 		}
 	}

 	return ret;
 }

 unsigned long clk_get_rate(unsigned int clk)
 {
 	unsigned long freq = 0;

 	switch (clk) {
 	case core_pll_clk:
 		freq = pll_freq_get(CORE_PLL);
 		break;
 	case pass_pll_clk:
 		freq = pll_freq_get(PASS_PLL);
 		break;
 	case tetris_pll_clk:
 		if (!cpu_is_k2e())
 			freq = pll_freq_get(TETRIS_PLL);
 		break;
 	case ddr3a_pll_clk:
 		freq = pll_freq_get(DDR3A_PLL);
 		break;
 	case ddr3b_pll_clk:
 		if (cpu_is_k2hk())
 			freq = pll_freq_get(DDR3B_PLL);
 		break;
 	case sys_clk0_1_clk:
 	case sys_clk0_clk:
 		freq = pll_freq_get(CORE_PLL) / pll0div_read(1);
 		break;
 	case sys_clk1_clk:
 	return pll_freq_get(CORE_PLL) / pll0div_read(2);
 		break;
 	case sys_clk2_clk:
 		freq = pll_freq_get(CORE_PLL) / pll0div_read(3);
 		break;
 	case sys_clk3_clk:
 		freq = pll_freq_get(CORE_PLL) / pll0div_read(4);
 		break;
 	case sys_clk0_2_clk:
 		freq = clk_get_rate(sys_clk0_clk) / 2;
 		break;
 	case sys_clk0_3_clk:
 		freq = clk_get_rate(sys_clk0_clk) / 3;
 		break;
 	case sys_clk0_4_clk:
 		freq = clk_get_rate(sys_clk0_clk) / 4;
 		break;
 	case sys_clk0_6_clk:
 		freq = clk_get_rate(sys_clk0_clk) / 6;
 		break;
 	case sys_clk0_8_clk:
 		freq = clk_get_rate(sys_clk0_clk) / 8;
 		break;
 	case sys_clk0_12_clk:
 		freq = clk_get_rate(sys_clk0_clk) / 12;
 		break;
 	case sys_clk0_24_clk:
 		freq = clk_get_rate(sys_clk0_clk) / 24;
 		break;
 	case sys_clk1_3_clk:
 		freq = clk_get_rate(sys_clk1_clk) / 3;
 		break;
 	case sys_clk1_4_clk:
 		freq = clk_get_rate(sys_clk1_clk) / 4;
 		break;
 	case sys_clk1_6_clk:
 		freq = clk_get_rate(sys_clk1_clk) / 6;
 		break;
 	case sys_clk1_12_clk:
 		freq = clk_get_rate(sys_clk1_clk) / 12;
 		break;
 	default:
 		break;
 	}

 	return freq;
 }
	/*
	* Keystone2: pll initialization
	*
	* (C) Copyright 2012-2014
	* Texas Instruments Incorporated, <www.ti.com>
	*
	* SPDX-License-Identifier: GPL-2.0+
	*/

	#include <common.h>
	#include <asm/arch/clock.h>
	#include <asm/arch/clock_defs.h>

	/* DEV and ARM speed definitions as specified in DEVSPEED register */
	int __weak speeds[DEVSPEED_NUMSPDS] = {
	SPD1000,
	SPD1200,
	SPD1350,
	SPD1400,
	SPD1500,
	SPD1400,
	SPD1350,
	SPD1200,
	SPD1000,
	SPD800,
	};

	const struct keystone_pll_regs keystone_pll_regs[] = {
	[CORE_PLL] = {KS2_MAINPLLCTL0, KS2_MAINPLLCTL1},
	[PASS_PLL] = {KS2_PASSPLLCTL0, KS2_PASSPLLCTL1},
	[TETRIS_PLL] = {KS2_ARMPLLCTL0, KS2_ARMPLLCTL1},
	[DDR3A_PLL] = {KS2_DDR3APLLCTL0, KS2_DDR3APLLCTL1},
	[DDR3B_PLL] = {KS2_DDR3BPLLCTL0, KS2_DDR3BPLLCTL1},
	};

	static void wait_for_completion(const struct pll_init_data *data)
	{
	int i;
	for (i = 0; i < 100; i++) {
	sdelay(450);
	if (!(pllctl_reg_read(data->pll, stat) & PLLSTAT_GOSTAT_MASK))
	break;
	}
	}

	static inline void bypass_main_pll(const struct pll_init_data *data)
	{
	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLENSRC_MASK \|
	PLLCTL_PLLEN_MASK);

	/* 4 cycles of reference clock CLKIN*/
	sdelay(340);
	}

	static void configure_mult_div(const struct pll_init_data *data)
	{
	u32 pllm, plld, bwadj;

	pllm = data->pll_m - 1;
	plld = (data->pll_d - 1) & CFG_PLLCTL0_PLLD_MASK;

	/* Program Multiplier */
	if (data->pll == MAIN_PLL)
	pllctl_reg_write(data->pll, mult, pllm & PLLM_MULT_LO_MASK);

	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
	CFG_PLLCTL0_PLLM_MASK,
	pllm << CFG_PLLCTL0_PLLM_SHIFT);

	/* Program BWADJ */
	bwadj = (data->pll_m - 1) >> 1; /* Divide pllm by 2 */
	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
	CFG_PLLCTL0_BWADJ_MASK,
	(bwadj << CFG_PLLCTL0_BWADJ_SHIFT) &
	CFG_PLLCTL0_BWADJ_MASK);
	bwadj = bwadj >> CFG_PLLCTL0_BWADJ_BITS;
	clrsetbits_le32(keystone_pll_regs[data->pll].reg1,
	CFG_PLLCTL1_BWADJ_MASK, bwadj);

	/* Program Divider */
	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
	CFG_PLLCTL0_PLLD_MASK, plld);
	}

	void configure_main_pll(const struct pll_init_data *data)
	{
	u32 tmp, pllod, i, alnctl_val = 0;
	u32 *offset;

	pllod = data->pll_od - 1;

	/* 100 micro sec for stabilization */
	sdelay(210000);

	tmp = pllctl_reg_read(data->pll, secctl);

	/* Check for Bypass */
	if (tmp & SECCTL_BYPASS_MASK) {
	setbits_le32(keystone_pll_regs[data->pll].reg1,
	CFG_PLLCTL1_ENSAT_MASK);

	bypass_main_pll(data);

	/* Powerdown and powerup Main Pll */
	pllctl_reg_setbits(data->pll, secctl, SECCTL_BYPASS_MASK);
	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
	/* 5 micro sec */
	sdelay(21000);

	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLPWRDN_MASK);
	} else {
	bypass_main_pll(data);
	}

	configure_mult_div(data);

	/* Program Output Divider */
	pllctl_reg_rmw(data->pll, secctl, SECCTL_OP_DIV_MASK,
	((pllod << SECCTL_OP_DIV_SHIFT) & SECCTL_OP_DIV_MASK));

	/* Program PLLDIVn */
	wait_for_completion(data);
	for (i = 0; i < PLLDIV_MAX; i++) {
	if (i < 3)
	offset = pllctl_reg(data->pll, div1) + i;
	else
	offset = pllctl_reg(data->pll, div4) + (i - 3);

	if (divn_val[i] != -1) {
	__raw_writel(divn_val[i] \| PLLDIV_ENABLE_MASK, offset);
	alnctl_val \|= BIT(i);
	}
	}

	if (alnctl_val) {
	pllctl_reg_setbits(data->pll, alnctl, alnctl_val);
	/*
	* Set GOSET bit in PLLCMD to initiate the GO operation
	* to change the divide
	*/
	pllctl_reg_setbits(data->pll, cmd, PLLSTAT_GOSTAT_MASK);
	wait_for_completion(data);
	}

	/* Reset PLL */
	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
	sdelay(21000); /* Wait for a minimum of 7 us*/
	pllctl_reg_clrbits(data->pll, ctl, PLLCTL_PLLRST_MASK);
	sdelay(105000); /* Wait for PLL Lock time (min 50 us) */

	/* Enable PLL */
	pllctl_reg_clrbits(data->pll, secctl, SECCTL_BYPASS_MASK);
	pllctl_reg_setbits(data->pll, ctl, PLLCTL_PLLEN_MASK);
	}

	void configure_secondary_pll(const struct pll_init_data *data)
	{
	int pllod = data->pll_od - 1;

	/* Enable Bypass mode */
	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_ENSAT_MASK);
	setbits_le32(keystone_pll_regs[data->pll].reg0,
	CFG_PLLCTL0_BYPASS_MASK);

	/* Enable Glitch free bypass for ARM PLL */
	if (cpu_is_k2hk() && data->pll == TETRIS_PLL)
	clrbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);

	configure_mult_div(data);

	/* Program Output Divider */
	clrsetbits_le32(keystone_pll_regs[data->pll].reg0,
	CFG_PLLCTL0_CLKOD_MASK,
	(pllod << CFG_PLLCTL0_CLKOD_SHIFT) &
	CFG_PLLCTL0_CLKOD_MASK);

	/* Reset PLL */
	setbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
	/* Wait for 5 micro seconds */
	sdelay(21000);

	/* Select the Output of PASS PLL as input to PASS */
	if (data->pll == PASS_PLL)
	setbits_le32(keystone_pll_regs[data->pll].reg1,
	CFG_PLLCTL1_PAPLL_MASK);

	/* Select the Output of ARM PLL as input to ARM */
	if (data->pll == TETRIS_PLL)
	setbits_le32(KS2_MISC_CTRL, MISC_CTL1_ARM_PLL_EN);

	clrbits_le32(keystone_pll_regs[data->pll].reg1, CFG_PLLCTL1_RST_MASK);
	/* Wait for 500 * REFCLK cucles * (PLLD + 1) */
	sdelay(105000);

	/* Switch to PLL mode */
	clrbits_le32(keystone_pll_regs[data->pll].reg0,
	CFG_PLLCTL0_BYPASS_MASK);
	}

	void init_pll(const struct pll_init_data *data)
	{
	if (data->pll == MAIN_PLL)
	configure_main_pll(data);
	else
	configure_secondary_pll(data);

	/*
	* This is required to provide a delay between multiple
	* consequent PPL configurations
	*/
	sdelay(210000);
	}

	void init_plls(void)
	{
	struct pll_init_data *data;
	int pll;

	for (pll = MAIN_PLL; pll < MAX_PLL_COUNT; pll++) {
	data = get_pll_init_data(pll);
	if (data)
	init_pll(data);
	}
	}

	static int get_max_speed(u32 val, u32 speed_supported)
	{
	int speed;

	/* Left most setbit gives the speed */
	for (speed = DEVSPEED_NUMSPDS; speed >= 0; speed--) {
	if ((val & BIT(speed)) & speed_supported)
	return speeds[speed];
	}

	/* If no bit is set, use SPD800 */
	return SPD800;
	}

	static inline u32 read_efuse_bootrom(void)
	{
	if (cpu_is_k2hk() && (cpu_revision() <= 1))
	return __raw_readl(KS2_REV1_DEVSPEED);
	else
	return __raw_readl(KS2_EFUSE_BOOTROM);
	}

	int get_max_arm_speed(void)
	{
	u32 armspeed = read_efuse_bootrom();

	armspeed = (armspeed & DEVSPEED_ARMSPEED_MASK) >>
	DEVSPEED_ARMSPEED_SHIFT;

	return get_max_speed(armspeed, ARM_SUPPORTED_SPEEDS);
	}

	int get_max_dev_speed(void)
	{
	u32 devspeed = read_efuse_bootrom();

	devspeed = (devspeed & DEVSPEED_DEVSPEED_MASK) >>
	DEVSPEED_DEVSPEED_SHIFT;

	return get_max_speed(devspeed, DEV_SUPPORTED_SPEEDS);
	}

	/**
	* pll_freq_get - get pll frequency
	* @pll: pll identifier
	*/
	static unsigned long pll_freq_get(int pll)
	{
	unsigned long mult = 1, prediv = 1, output_div = 2;
	unsigned long ret;
	u32 tmp, reg;

	if (pll == MAIN_PLL) {
	ret = external_clk[sys_clk];
	if (pllctl_reg_read(pll, ctl) & PLLCTL_PLLEN_MASK) {
	/* PLL mode */
	tmp = __raw_readl(KS2_MAINPLLCTL0);
	prediv = (tmp & CFG_PLLCTL0_PLLD_MASK) + 1;
	mult = ((tmp & CFG_PLLCTL0_PLLM_HI_MASK) >>
	CFG_PLLCTL0_PLLM_SHIFT \|
	(pllctl_reg_read(pll, mult) &
	PLLM_MULT_LO_MASK)) + 1;
	output_div = ((pllctl_reg_read(pll, secctl) &
	SECCTL_OP_DIV_MASK) >>
	SECCTL_OP_DIV_SHIFT) + 1;

	ret = ret / prediv / output_div * mult;
	}
	} else {
	switch (pll) {
	case PASS_PLL:
	ret = external_clk[pa_clk];
	reg = KS2_PASSPLLCTL0;
	break;
	case TETRIS_PLL:
	ret = external_clk[tetris_clk];
	reg = KS2_ARMPLLCTL0;
	break;
	case DDR3A_PLL:
	ret = external_clk[ddr3a_clk];
	reg = KS2_DDR3APLLCTL0;
	break;
	case DDR3B_PLL:
	ret = external_clk[ddr3b_clk];
	reg = KS2_DDR3BPLLCTL0;
	break;
	default:
	return 0;
	}

	tmp = __raw_readl(reg);

	if (!(tmp & CFG_PLLCTL0_BYPASS_MASK)) {
	/* Bypass disabled */
	prediv = (tmp & CFG_PLLCTL0_PLLD_MASK) + 1;
	mult = ((tmp & CFG_PLLCTL0_PLLM_MASK) >>
	CFG_PLLCTL0_PLLM_SHIFT) + 1;
	output_div = ((tmp & CFG_PLLCTL0_CLKOD_MASK) >>
	CFG_PLLCTL0_CLKOD_SHIFT) + 1;
	ret = ((ret / prediv) * mult) / output_div;
	}
	}

	return ret;
	}

	unsigned long clk_get_rate(unsigned int clk)
	{
	unsigned long freq = 0;

	switch (clk) {
	case core_pll_clk:
	freq = pll_freq_get(CORE_PLL);
	break;
	case pass_pll_clk:
	freq = pll_freq_get(PASS_PLL);
	break;
	case tetris_pll_clk:
	if (!cpu_is_k2e())
	freq = pll_freq_get(TETRIS_PLL);
	break;
	case ddr3a_pll_clk:
	freq = pll_freq_get(DDR3A_PLL);
	break;
	case ddr3b_pll_clk:
	if (cpu_is_k2hk())
	freq = pll_freq_get(DDR3B_PLL);
	break;
	case sys_clk0_1_clk:
	case sys_clk0_clk:
	freq = pll_freq_get(CORE_PLL) / pll0div_read(1);
	break;
	case sys_clk1_clk:
	return pll_freq_get(CORE_PLL) / pll0div_read(2);
	break;
	case sys_clk2_clk:
	freq = pll_freq_get(CORE_PLL) / pll0div_read(3);
	break;
	case sys_clk3_clk:
	freq = pll_freq_get(CORE_PLL) / pll0div_read(4);
	break;
	case sys_clk0_2_clk:
	freq = clk_get_rate(sys_clk0_clk) / 2;
	break;
	case sys_clk0_3_clk:
	freq = clk_get_rate(sys_clk0_clk) / 3;
	break;
	case sys_clk0_4_clk:
	freq = clk_get_rate(sys_clk0_clk) / 4;
	break;
	case sys_clk0_6_clk:
	freq = clk_get_rate(sys_clk0_clk) / 6;
	break;
	case sys_clk0_8_clk:
	freq = clk_get_rate(sys_clk0_clk) / 8;
	break;
	case sys_clk0_12_clk:
	freq = clk_get_rate(sys_clk0_clk) / 12;
	break;
	case sys_clk0_24_clk:
	freq = clk_get_rate(sys_clk0_clk) / 24;
	break;
	case sys_clk1_3_clk:
	freq = clk_get_rate(sys_clk1_clk) / 3;
	break;
	case sys_clk1_4_clk:
	freq = clk_get_rate(sys_clk1_clk) / 4;
	break;
	case sys_clk1_6_clk:
	freq = clk_get_rate(sys_clk1_clk) / 6;
	break;
	case sys_clk1_12_clk:
	freq = clk_get_rate(sys_clk1_clk) / 12;
	break;
	default:
	break;
	}

	return freq;
	}