| /* |
| * Copyright 2009-2013 Freescale Semiconductor, Inc. |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #include <common.h> |
| #include <command.h> |
| #include <i2c.h> |
| #include <netdev.h> |
| #include <linux/compiler.h> |
| #include <asm/mmu.h> |
| #include <asm/processor.h> |
| #include <asm/immap_85xx.h> |
| #include <asm/fsl_law.h> |
| #include <asm/fsl_serdes.h> |
| #include <asm/fsl_portals.h> |
| #include <asm/fsl_liodn.h> |
| #include <fm_eth.h> |
| #include "t208xrdb.h" |
| #include "cpld.h" |
| |
| DECLARE_GLOBAL_DATA_PTR; |
| |
| int checkboard(void) |
| { |
| struct cpu_type *cpu = gd->arch.cpu; |
| static const char *freq[3] = {"100.00MHZ", "125.00MHz", "156.25MHZ"}; |
| |
| printf("Board: %sRDB, ", cpu->name); |
| printf("Board rev: 0x%02x CPLD ver: 0x%02x, boot from ", |
| CPLD_READ(hw_ver), CPLD_READ(sw_ver)); |
| |
| #ifdef CONFIG_SDCARD |
| puts("SD/MMC\n"); |
| #elif CONFIG_SPIFLASH |
| puts("SPI\n"); |
| #else |
| u8 reg; |
| |
| reg = CPLD_READ(flash_csr); |
| |
| if (reg & CPLD_BOOT_SEL) { |
| puts("NAND\n"); |
| } else { |
| reg = ((reg & CPLD_LBMAP_MASK) >> CPLD_LBMAP_SHIFT); |
| printf("NOR vBank%d\n", reg); |
| } |
| #endif |
| |
| puts("SERDES Reference Clocks:\n"); |
| printf("SD1_CLK1=%s, SD1_CLK2=%s\n", freq[2], freq[0]); |
| printf("SD2_CLK1=%s, SD2_CLK2=%s\n", freq[0], freq[0]); |
| |
| return 0; |
| } |
| |
| int board_early_init_r(void) |
| { |
| const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; |
| int flash_esel = find_tlb_idx((void *)flashbase, 1); |
| /* |
| * Remap Boot flash + PROMJET region to caching-inhibited |
| * so that flash can be erased properly. |
| */ |
| |
| /* Flush d-cache and invalidate i-cache of any FLASH data */ |
| flush_dcache(); |
| invalidate_icache(); |
| if (flash_esel == -1) { |
| /* very unlikely unless something is messed up */ |
| puts("Error: Could not find TLB for FLASH BASE\n"); |
| flash_esel = 2; /* give our best effort to continue */ |
| } else { |
| /* invalidate existing TLB entry for flash + promjet */ |
| disable_tlb(flash_esel); |
| } |
| |
| set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, |
| MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, |
| 0, flash_esel, BOOKE_PAGESZ_256M, 1); |
| |
| set_liodns(); |
| #ifdef CONFIG_SYS_DPAA_QBMAN |
| setup_portals(); |
| #endif |
| |
| return 0; |
| } |
| |
| unsigned long get_board_sys_clk(void) |
| { |
| return CONFIG_SYS_CLK_FREQ; |
| } |
| |
| unsigned long get_board_ddr_clk(void) |
| { |
| return CONFIG_DDR_CLK_FREQ; |
| } |
| |
| int misc_init_r(void) |
| { |
| return 0; |
| } |
| |
| int ft_board_setup(void *blob, bd_t *bd) |
| { |
| phys_addr_t base; |
| phys_size_t size; |
| |
| ft_cpu_setup(blob, bd); |
| |
| base = getenv_bootm_low(); |
| size = getenv_bootm_size(); |
| |
| fdt_fixup_memory(blob, (u64)base, (u64)size); |
| |
| #ifdef CONFIG_PCI |
| pci_of_setup(blob, bd); |
| #endif |
| |
| fdt_fixup_liodn(blob); |
| fdt_fixup_dr_usb(blob, bd); |
| |
| #ifdef CONFIG_SYS_DPAA_FMAN |
| fdt_fixup_fman_ethernet(blob); |
| fdt_fixup_board_enet(blob); |
| #endif |
| |
| return 0; |
| } |