| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * Copyright (C) 2016 Freescale Semiconductor, Inc. |
| */ |
| |
| #include <common.h> |
| #include <log.h> |
| #include <asm/io.h> |
| #include <asm/mach-imx/sys_proto.h> |
| #include <command.h> |
| #include <elf.h> |
| #include <imx_sip.h> |
| #include <linux/arm-smccc.h> |
| #include <linux/compiler.h> |
| #include <cpu_func.h> |
| |
| /* Just to avoid build error */ |
| #if CONFIG_IS_ENABLED(IMX8M) |
| #define SRC_M4C_NON_SCLR_RST_MASK BIT(0) |
| #define SRC_M4_ENABLE_MASK BIT(0) |
| #define SRC_M4_REG_OFFSET 0 |
| #endif |
| |
| const __weak struct rproc_att hostmap[] = { }; |
| |
| static const struct rproc_att *get_host_mapping(unsigned long auxcore) |
| { |
| const struct rproc_att *mmap = hostmap; |
| |
| while (mmap && mmap->size) { |
| if (mmap->da <= auxcore && |
| mmap->da + mmap->size > auxcore) |
| return mmap; |
| mmap++; |
| } |
| |
| return NULL; |
| } |
| |
| /* |
| * A very simple elf loader for the auxilary core, assumes the image |
| * is valid, returns the entry point address. |
| * Translates load addresses in the elf file to the U-Boot address space. |
| */ |
| static unsigned long load_elf_image_m_core_phdr(unsigned long addr) |
| { |
| Elf32_Ehdr *ehdr; /* ELF header structure pointer */ |
| Elf32_Phdr *phdr; /* Program header structure pointer */ |
| int i; |
| |
| ehdr = (Elf32_Ehdr *)addr; |
| phdr = (Elf32_Phdr *)(addr + ehdr->e_phoff); |
| |
| /* Load each program header */ |
| for (i = 0; i < ehdr->e_phnum; ++i, ++phdr) { |
| const struct rproc_att *mmap = get_host_mapping(phdr->p_paddr); |
| void *dst, *src; |
| |
| if (phdr->p_type != PT_LOAD) |
| continue; |
| |
| if (!mmap) { |
| printf("Invalid aux core address: %08x", |
| phdr->p_paddr); |
| return 0; |
| } |
| |
| dst = (void *)(ulong)(phdr->p_paddr - mmap->da) + mmap->sa; |
| src = (void *)addr + phdr->p_offset; |
| |
| debug("Loading phdr %i to 0x%p (%i bytes)\n", |
| i, dst, phdr->p_filesz); |
| |
| if (phdr->p_filesz) |
| memcpy(dst, src, phdr->p_filesz); |
| if (phdr->p_filesz != phdr->p_memsz) |
| memset(dst + phdr->p_filesz, 0x00, |
| phdr->p_memsz - phdr->p_filesz); |
| flush_cache((unsigned long)dst & |
| ~(CONFIG_SYS_CACHELINE_SIZE - 1), |
| ALIGN(phdr->p_filesz, CONFIG_SYS_CACHELINE_SIZE)); |
| } |
| |
| return ehdr->e_entry; |
| } |
| |
| int arch_auxiliary_core_up(u32 core_id, ulong addr) |
| { |
| ulong stack, pc; |
| |
| if (!addr) |
| return -EINVAL; |
| |
| /* |
| * handling ELF64 binaries |
| * isn't supported yet. |
| */ |
| if (valid_elf_image(addr)) { |
| stack = 0x0; |
| pc = load_elf_image_m_core_phdr(addr); |
| if (!pc) |
| return CMD_RET_FAILURE; |
| |
| } else { |
| /* |
| * Assume binary file with vector table at the beginning. |
| * Cortex-M4 vector tables start with the stack pointer (SP) |
| * and reset vector (initial PC). |
| */ |
| stack = *(u32 *)addr; |
| pc = *(u32 *)(addr + 4); |
| } |
| |
| printf("## Starting auxiliary core stack = 0x%08lX, pc = 0x%08lX...\n", |
| stack, pc); |
| |
| /* Set the stack and pc to M4 bootROM */ |
| writel(stack, M4_BOOTROM_BASE_ADDR); |
| writel(pc, M4_BOOTROM_BASE_ADDR + 4); |
| |
| flush_dcache_all(); |
| |
| /* Enable M4 */ |
| if (CONFIG_IS_ENABLED(IMX8M)) { |
| arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_START, 0, 0, 0, 0, 0, 0, NULL); |
| } else { |
| clrsetbits_le32(SRC_BASE_ADDR + SRC_M4_REG_OFFSET, |
| SRC_M4C_NON_SCLR_RST_MASK, SRC_M4_ENABLE_MASK); |
| } |
| |
| return 0; |
| } |
| |
| int arch_auxiliary_core_check_up(u32 core_id) |
| { |
| struct arm_smccc_res res; |
| unsigned int val; |
| |
| if (CONFIG_IS_ENABLED(IMX8M)) { |
| arm_smccc_smc(IMX_SIP_SRC, IMX_SIP_SRC_M4_STARTED, 0, 0, 0, 0, 0, 0, &res); |
| return res.a0; |
| } |
| |
| val = readl(SRC_BASE_ADDR + SRC_M4_REG_OFFSET); |
| |
| if (val & SRC_M4C_NON_SCLR_RST_MASK) |
| return 0; /* assert in reset */ |
| |
| return 1; |
| } |
| |
| /* |
| * To i.MX6SX and i.MX7D, the image supported by bootaux needs |
| * the reset vector at the head for the image, with SP and PC |
| * as the first two words. |
| * |
| * Per the cortex-M reference manual, the reset vector of M4 needs |
| * to exist at 0x0 (TCMUL). The PC and SP are the first two addresses |
| * of that vector. So to boot M4, the A core must build the M4's reset |
| * vector with getting the PC and SP from image and filling them to |
| * TCMUL. When M4 is kicked, it will load the PC and SP by itself. |
| * The TCMUL is mapped to (M4_BOOTROM_BASE_ADDR) at A core side for |
| * accessing the M4 TCMUL. |
| */ |
| static int do_bootaux(struct cmd_tbl *cmdtp, int flag, int argc, |
| char *const argv[]) |
| { |
| ulong addr; |
| int ret, up; |
| |
| if (argc < 2) |
| return CMD_RET_USAGE; |
| |
| up = arch_auxiliary_core_check_up(0); |
| if (up) { |
| printf("## Auxiliary core is already up\n"); |
| return CMD_RET_SUCCESS; |
| } |
| |
| addr = hextoul(argv[1], NULL); |
| |
| if (!addr) |
| return CMD_RET_FAILURE; |
| |
| ret = arch_auxiliary_core_up(0, addr); |
| if (ret) |
| return CMD_RET_FAILURE; |
| |
| return CMD_RET_SUCCESS; |
| } |
| |
| U_BOOT_CMD( |
| bootaux, CONFIG_SYS_MAXARGS, 1, do_bootaux, |
| "Start auxiliary core", |
| "" |
| ); |