| FREESCALE MX28EVK |
| ================== |
| |
| Supported hardware: only MX28EVK rev D is supported in U-boot. |
| |
| Files of the MX28EVK port |
| -------------------------- |
| |
| arch/arm/cpu/arm926ejs/mxs/ - The CPU support code for the Freescale i.MX28 |
| arch/arm/include/asm/arch-mxs/ - Header files for the Freescale i.MX28 |
| board/freescale/mx28evk/ - MX28EVK board specific files |
| include/configs/mx28evk.h - MX28EVK configuration file |
| |
| Jumper configuration |
| --------------------- |
| |
| To boot MX28EVK from an SD card, set the boot mode DIP switches as: |
| |
| * Boot Mode Select: 1 0 0 1 (Boot from SD card Slot 0 - U42) |
| * JTAG PSWITCH RESET: To the right (reset disabled) |
| * Battery Source: Down |
| * Wall 5V: Up |
| * VDD 5V: To the left (off) |
| * Hold Button: Down (off) |
| |
| Follow the instructions from doc/README.mx28_common to generate a bootable SD |
| card. |
| |
| Insert the SD card in slot 0, power up the board and U-boot will boot. |