blob: db386eac01f5ae7395989f0d9d1533ea56883cfd [file] [log] [blame]
#ifndef __MINI2440_BOARD_CONF_H__
#define __MINI2440_BOARD_CONF_H__
/* PLL Parameters */
#define CLKDIVN_VAL 7
#define M_MDIV 0x7f
#define M_PDIV 0x2
#define M_SDIV 0x1
#define U_M_MDIV 0x38
#define U_M_PDIV 0x2
#define U_M_SDIV 0x2
/* BWSCON */
#define DW8 0x0
#define DW16 0x1
#define DW32 0x2
#define WAIT (0x1<<2)
#define UBLB (0x1<<3)
#define B1_BWSCON (DW32)
#define B2_BWSCON (DW16)
#define B3_BWSCON (DW16 + WAIT + UBLB)
#define B4_BWSCON (DW16 + WAIT + UBLB)
#define B5_BWSCON (DW16)
#define B6_BWSCON (DW32)
#define B7_BWSCON (DW32)
/*
* Bank Configuration
*/
#define B0_Tacs 0x0 /* 0clk */
#define B0_Tcos 0x0 /* 0clk */
#define B0_Tacc 0x7 /* 14clk */
#define B0_Tcoh 0x0 /* 0clk */
#define B0_Tah 0x0 /* 0clk */
#define B0_Tacp 0x0 /* 0clk */
#define B0_PMC 0x0 /* normal */
#define B1_Tacs 0x0
#define B1_Tcos 0x0
#define B1_Tacc 0x7
#define B1_Tcoh 0x0
#define B1_Tah 0x0
#define B1_Tacp 0x0
#define B1_PMC 0x0
#define B2_Tacs 0x0
#define B2_Tcos 0x0
#define B2_Tacc 0x7
#define B2_Tcoh 0x0
#define B2_Tah 0x0
#define B2_Tacp 0x0
#define B2_PMC 0x0
#define B3_Tacs 0x0
#define B3_Tcos 0x3 /* 4clk */
#define B3_Tacc 0x7
#define B3_Tcoh 0x1 /* 1clk */
#define B3_Tah 0x3 /* 4clk */
#define B3_Tacp 0x0
#define B3_PMC 0x0
#define B4_Tacs 0x0
#define B4_Tcos 0x3
#define B4_Tacc 0x7
#define B4_Tcoh 0x1
#define B4_Tah 0x3
#define B4_Tacp 0x0
#define B4_PMC 0x0
#define B5_Tacs 0x0
#define B5_Tcos 0x0
#define B5_Tacc 0x7
#define B5_Tcoh 0x0
#define B5_Tah 0x0
#define B5_Tacp 0x0
#define B5_PMC 0x0
/*
* SDRAM Configuration
*/
#define SDRAM_MT 0x3 /* SDRAM */
#define SDRAM_Trcd 0x0 /* 2clk */
#define SDRAM_SCAN_9 0x1 /* 9bit */
#define SDRAM_SCAN_10 0x2 /* 10bit */
#define SDRAM_64MB ((SDRAM_MT<<15) + (SDRAM_Trcd<<2) + (SDRAM_SCAN_9))
/*
* Refresh Parameter
*/
#define REFEN 0x1 /* Refresh enable */
#define TREFMD 0x0 /* CBR(CAS before RAS)/Auto refresh */
#define Trp 0x1 /* 3clk */
#define Trc 0x3 /* 7clk */
#define Tchr 0x0 /* unused */
#define REFCNT 1012 /* period=10.37us, HCLK=100Mhz, (2048 + 1-10.37*100) */
/*
* MRSR Parameter
*/
#define BL 0x0
#define BT 0x0
#define CL 0x3 /* 3 clocks */
#define TM 0x0
#define WBL 0x0
/*
* BankSize Parameter
*/
#define BK76MAP 0x2 /* 128MB/128MB */
#define SCLK_EN 0x1 /* SCLK active */
#define SCKE_EN 0x1 /* SDRAM power down mode enable */
#define BURST_EN 0x1 /* Burst enable */
/*
* Register values
*/
#define BANK_CONF ((0 + (B1_BWSCON<<4) + (B2_BWSCON<<8) + (B3_BWSCON<<12) + \
(B4_BWSCON<<16) + (B5_BWSCON<<20) + (B6_BWSCON<<24) + \
(B7_BWSCON<<28)))
#define B0_CONF ((B0_Tacs<<13) + (B0_Tcos<<11) + (B0_Tacc<<8) + \
(B0_Tcoh<<6) + (B0_Tah<<4) + (B0_Tacp<<2) + (B0_PMC))
#define B1_CONF ((B1_Tacs<<13) + (B1_Tcos<<11) + (B1_Tacc<<8) + \
(B1_Tcoh<<6) + (B1_Tah<<4) + (B1_Tacp<<2) + (B1_PMC))
#define B2_CONF ((B2_Tacs<<13) + (B2_Tcos<<11) + (B2_Tacc<<8) + \
(B2_Tcoh<<6) + (B2_Tah<<4) + (B2_Tacp<<2) + (B2_PMC))
#define B3_CONF ((B3_Tacs<<13) + (B3_Tcos<<11) + (B3_Tacc<<8) + \
(B3_Tcoh<<6) + (B3_Tah<<4) + (B3_Tacp<<2) + (B3_PMC))
#define B4_CONF ((B4_Tacs<<13) + (B4_Tcos<<11) + (B4_Tacc<<8) + \
(B4_Tcoh<<6) + (B4_Tah<<4) + (B4_Tacp<<2) + (B4_PMC))
#define B5_CONF ((B5_Tacs<<13) + (B5_Tcos<<11) + (B5_Tacc<<8) + \
(B5_Tcoh<<6) + (B5_Tah<<4) + (B5_Tacp<<2) + (B5_PMC))
#define MEM_TIMING (REFEN<<23) + (TREFMD<<22) + (Trp<<20) + \
(Trc<<18) + (Tchr<<16) + REFCNT
#define BANKSIZE_CONF (BK76MAP) + (SCLK_EN<<4) + (SCKE_EN<<5) + (BURST_EN<<7)
#define B6_MRSR (CL<<4)
#define B7_MRSR (CL<<4)
#endif