| /* |
| **===================================================================== |
| ** |
| ** Copyright (C) 2000, 2001, 2002, 2003 |
| ** The LEOX team <team@leox.org>, http://www.leox.org |
| ** |
| ** LEOX.org is about the development of free hardware and software resources |
| ** for system on chip. |
| ** |
| ** Description: U-Boot port on the LEOX's ELPT860 CPU board |
| ** ~~~~~~~~~~~ |
| ** |
| **===================================================================== |
| ** |
| ** This program is free software; you can redistribute it and/or |
| ** modify it under the terms of the GNU General Public License as |
| ** published by the Free Software Foundation; either version 2 of |
| ** the License, or (at your option) any later version. |
| ** |
| ** This program is distributed in the hope that it will be useful, |
| ** but WITHOUT ANY WARRANTY; without even the implied warranty of |
| ** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| ** GNU General Public License for more details. |
| ** |
| ** You should have received a copy of the GNU General Public License |
| ** along with this program; if not, write to the Free Software |
| ** Foundation, Inc., 59 Temple Place, Suite 330, Boston, |
| ** MA 02111-1307 USA |
| ** |
| **===================================================================== |
| */ |
| |
| /* |
| ** Note 1: In this file, you have to provide the following variable: |
| ** ------ |
| ** flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS] |
| ** 'flash_info_t' structure is defined into 'include/flash.h' |
| ** and defined as extern into 'common/cmd_flash.c' |
| ** |
| ** Note 2: In this file, you have to provide the following functions: |
| ** ------ |
| ** unsigned long flash_init(void) |
| ** called from 'board_init_r()' into 'common/board.c' |
| ** |
| ** void flash_print_info(flash_info_t *info) |
| ** called from 'do_flinfo()' into 'common/cmd_flash.c' |
| ** |
| ** int flash_erase(flash_info_t *info, |
| ** int s_first, |
| ** int s_last) |
| ** called from 'do_flerase()' & 'flash_sect_erase()' into 'common/cmd_flash.c' |
| ** |
| ** int write_buff (flash_info_t *info, |
| ** uchar *src, |
| ** ulong addr, |
| ** ulong cnt) |
| ** called from 'flash_write()' into 'common/cmd_flash.c' |
| */ |
| |
| #include <common.h> |
| #include <mpc8xx.h> |
| |
| |
| #ifndef CONFIG_ENV_ADDR |
| # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) |
| #endif |
| |
| flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ |
| |
| /*----------------------------------------------------------------------- |
| * Internal Functions |
| */ |
| static void flash_get_offsets (ulong base, flash_info_t *info); |
| static ulong flash_get_size (volatile unsigned char *addr, flash_info_t *info); |
| |
| static int write_word (flash_info_t *info, ulong dest, ulong data); |
| static int write_byte (flash_info_t *info, ulong dest, uchar data); |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| unsigned long |
| flash_init (void) |
| { |
| volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR; |
| volatile memctl8xx_t *memctl = &immap->im_memctl; |
| unsigned long size_b0; |
| int i; |
| |
| /* Init: no FLASHes known */ |
| for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) |
| { |
| flash_info[i].flash_id = FLASH_UNKNOWN; |
| } |
| |
| /* Static FLASH Bank configuration here - FIXME XXX */ |
| |
| size_b0 = flash_get_size ((volatile unsigned char *)FLASH_BASE0_PRELIM, |
| &flash_info[0]); |
| |
| if ( flash_info[0].flash_id == FLASH_UNKNOWN ) |
| { |
| printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n", |
| size_b0, size_b0<<20); |
| } |
| |
| /* Remap FLASH according to real size */ |
| memctl->memc_or0 = CONFIG_SYS_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK); |
| memctl->memc_br0 = (CONFIG_SYS_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_PS_8 | BR_V; |
| |
| /* Re-do sizing to get full correct info */ |
| size_b0 = flash_get_size ((volatile unsigned char *)CONFIG_SYS_FLASH_BASE, |
| &flash_info[0]); |
| |
| flash_get_offsets (CONFIG_SYS_FLASH_BASE, &flash_info[0]); |
| |
| #if CONFIG_SYS_MONITOR_BASE >= CONFIG_SYS_FLASH_BASE |
| /* monitor protection ON by default */ |
| flash_protect (FLAG_PROTECT_SET, |
| CONFIG_SYS_MONITOR_BASE, |
| CONFIG_SYS_MONITOR_BASE + monitor_flash_len-1, |
| &flash_info[0]); |
| #endif |
| |
| #ifdef CONFIG_ENV_IS_IN_FLASH |
| /* ENV protection ON by default */ |
| flash_protect(FLAG_PROTECT_SET, |
| CONFIG_ENV_ADDR, |
| CONFIG_ENV_ADDR + CONFIG_ENV_SIZE-1, |
| &flash_info[0]); |
| #endif |
| |
| flash_info[0].size = size_b0; |
| |
| return (size_b0); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| static void |
| flash_get_offsets (ulong base, |
| flash_info_t *info) |
| { |
| int i; |
| |
| #define SECTOR_64KB 0x00010000 |
| |
| /* set up sector start adress table */ |
| for (i = 0; i < info->sector_count; i++) |
| { |
| info->start[i] = base + (i * SECTOR_64KB); |
| } |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| void |
| flash_print_info (flash_info_t *info) |
| { |
| int i; |
| |
| if ( info->flash_id == FLASH_UNKNOWN ) |
| { |
| printf ("missing or unknown FLASH type\n"); |
| return; |
| } |
| |
| switch ( info->flash_id & FLASH_VENDMASK ) |
| { |
| case FLASH_MAN_AMD: printf ("AMD "); break; |
| case FLASH_MAN_FUJ: printf ("FUJITSU "); break; |
| case FLASH_MAN_STM: printf ("STM (Thomson) "); break; |
| default: printf ("Unknown Vendor "); break; |
| } |
| |
| switch ( info->flash_id & FLASH_TYPEMASK ) |
| { |
| case FLASH_AM040: printf ("AM29F040 (4 Mbits)\n"); |
| break; |
| default: printf ("Unknown Chip Type\n"); |
| break; |
| } |
| |
| printf (" Size: %ld KB in %d Sectors\n", |
| info->size >> 10, info->sector_count); |
| |
| printf (" Sector Start Addresses:"); |
| for (i=0; i<info->sector_count; ++i) |
| { |
| if ((i % 5) == 0) |
| printf ("\n "); |
| printf (" %08lX%s", |
| info->start[i], |
| info->protect[i] ? " (RO)" : " " |
| ); |
| } |
| printf ("\n"); |
| |
| return; |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| /* |
| * The following code cannot be run from FLASH! |
| */ |
| |
| static ulong |
| flash_get_size (volatile unsigned char *addr, |
| flash_info_t *info) |
| { |
| short i; |
| uchar value; |
| ulong base = (ulong)addr; |
| |
| /* Write auto select command: read Manufacturer ID */ |
| addr[0x0555] = 0xAA; |
| addr[0x02AA] = 0x55; |
| addr[0x0555] = 0x90; |
| |
| value = addr[0]; |
| |
| switch ( value ) |
| { |
| /* case AMD_MANUFACT: */ |
| case 0x01: |
| info->flash_id = FLASH_MAN_AMD; |
| break; |
| /* case FUJ_MANUFACT: */ |
| case 0x04: |
| info->flash_id = FLASH_MAN_FUJ; |
| break; |
| /* case STM_MANUFACT: */ |
| case 0x20: |
| info->flash_id = FLASH_MAN_STM; |
| break; |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| info->sector_count = 0; |
| info->size = 0; |
| return (0); /* no or unknown flash */ |
| } |
| |
| value = addr[1]; /* device ID */ |
| |
| switch ( value ) |
| { |
| case STM_ID_F040B: |
| case AMD_ID_F040B: |
| info->flash_id += FLASH_AM040; /* 4 Mbits = 512k * 8 */ |
| info->sector_count = 8; |
| info->size = 0x00080000; |
| break; |
| |
| default: |
| info->flash_id = FLASH_UNKNOWN; |
| return (0); /* => no or unknown flash */ |
| } |
| |
| /* set up sector start adress table */ |
| for (i = 0; i < info->sector_count; i++) |
| { |
| info->start[i] = base + (i * 0x00010000); |
| } |
| |
| /* check for protected sectors */ |
| for (i = 0; i < info->sector_count; i++) |
| { |
| /* read sector protection at sector address, (A7 .. A0) = 0x02 */ |
| /* D0 = 1 if protected */ |
| addr = (volatile unsigned char *)(info->start[i]); |
| info->protect[i] = addr[2] & 1; |
| } |
| |
| /* |
| * Prevent writes to uninitialized FLASH. |
| */ |
| if ( info->flash_id != FLASH_UNKNOWN ) |
| { |
| addr = (volatile unsigned char *)info->start[0]; |
| |
| *addr = 0xF0; /* reset bank */ |
| } |
| |
| return (info->size); |
| } |
| |
| |
| /*----------------------------------------------------------------------- |
| */ |
| |
| int |
| flash_erase (flash_info_t *info, |
| int s_first, |
| int s_last) |
| { |
| volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]); |
| int flag, prot, sect, l_sect; |
| ulong start, now, last; |
| |
| if ( (s_first < 0) || (s_first > s_last) ) |
| { |
| if ( info->flash_id == FLASH_UNKNOWN ) |
| { |
| printf ("- missing\n"); |
| } |
| else |
| { |
| printf ("- no sectors to erase\n"); |
| } |
| return ( 1 ); |
| } |
| |
| if ( (info->flash_id == FLASH_UNKNOWN) || |
| (info->flash_id > FLASH_AMD_COMP) ) |
| { |
| printf ("Can't erase unknown flash type %08lx - aborted\n", |
| info->flash_id); |
| return ( 1 ); |
| } |
| |
| prot = 0; |
| for (sect=s_first; sect<=s_last; ++sect) |
| { |
| if ( info->protect[sect] ) |
| { |
| prot++; |
| } |
| } |
| |
| if ( prot ) |
| { |
| printf ("- Warning: %d protected sectors will not be erased!\n", prot); |
| } |
| else |
| { |
| printf ("\n"); |
| } |
| |
| l_sect = -1; |
| |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr[0x0555] = 0xAA; |
| addr[0x02AA] = 0x55; |
| addr[0x0555] = 0x80; |
| addr[0x0555] = 0xAA; |
| addr[0x02AA] = 0x55; |
| |
| /* Start erase on unprotected sectors */ |
| for (sect = s_first; sect<=s_last; sect++) |
| { |
| if (info->protect[sect] == 0) /* not protected */ |
| { |
| addr = (volatile unsigned char *)(info->start[sect]); |
| addr[0] = 0x30; |
| l_sect = sect; |
| } |
| } |
| |
| /* re-enable interrupts if necessary */ |
| if ( flag ) |
| enable_interrupts(); |
| |
| /* wait at least 80us - let's wait 1 ms */ |
| udelay (1000); |
| |
| /* |
| * We wait for the last triggered sector |
| */ |
| if ( l_sect < 0 ) |
| goto DONE; |
| |
| start = get_timer (0); |
| last = start; |
| addr = (volatile unsigned char *)(info->start[l_sect]); |
| while ( (addr[0] & 0x80) != 0x80 ) |
| { |
| if ( (now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT ) |
| { |
| printf ("Timeout\n"); |
| return ( 1 ); |
| } |
| /* show that we're waiting */ |
| if ( (now - last) > 1000 ) /* every second */ |
| { |
| putc ('.'); |
| last = now; |
| } |
| } |
| |
| DONE: |
| /* reset to read mode */ |
| addr = (volatile unsigned char *)info->start[0]; |
| addr[0] = 0xF0; /* reset bank */ |
| |
| printf (" done\n"); |
| |
| return ( 0 ); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Copy memory to flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| |
| int |
| write_buff (flash_info_t *info, |
| uchar *src, |
| ulong addr, |
| ulong cnt) |
| { |
| ulong cp, wp, data; |
| uchar bdata; |
| int i, l, rc; |
| |
| if ( (info->flash_id & FLASH_TYPEMASK) == FLASH_AM040 ) |
| { |
| /* Width of the data bus: 8 bits */ |
| |
| wp = addr; |
| |
| while ( cnt ) |
| { |
| bdata = *src++; |
| |
| if ( (rc = write_byte(info, wp, bdata)) != 0 ) |
| { |
| return (rc); |
| } |
| |
| ++wp; |
| --cnt; |
| } |
| |
| return ( 0 ); |
| } |
| else |
| { |
| /* Width of the data bus: 32 bits */ |
| |
| wp = (addr & ~3); /* get lower word aligned address */ |
| |
| /* |
| * handle unaligned start bytes |
| */ |
| if ( (l = addr - wp) != 0 ) |
| { |
| data = 0; |
| for (i=0, cp=wp; i<l; ++i, ++cp) |
| { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| for (; i<4 && cnt>0; ++i) |
| { |
| data = (data << 8) | *src++; |
| --cnt; |
| ++cp; |
| } |
| for (; cnt==0 && i<4; ++i, ++cp) |
| { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| if ( (rc = write_word(info, wp, data)) != 0 ) |
| { |
| return (rc); |
| } |
| wp += 4; |
| } |
| |
| /* |
| * handle word aligned part |
| */ |
| while ( cnt >= 4 ) |
| { |
| data = 0; |
| for (i=0; i<4; ++i) |
| { |
| data = (data << 8) | *src++; |
| } |
| if ( (rc = write_word(info, wp, data)) != 0 ) |
| { |
| return (rc); |
| } |
| wp += 4; |
| cnt -= 4; |
| } |
| |
| if ( cnt == 0 ) |
| { |
| return (0); |
| } |
| |
| /* |
| * handle unaligned tail bytes |
| */ |
| data = 0; |
| for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) |
| { |
| data = (data << 8) | *src++; |
| --cnt; |
| } |
| for (; i<4; ++i, ++cp) |
| { |
| data = (data << 8) | (*(uchar *)cp); |
| } |
| |
| return (write_word(info, wp, data)); |
| } |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a word to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int |
| write_word (flash_info_t *info, |
| ulong dest, |
| ulong data) |
| { |
| vu_long *addr = (vu_long*)(info->start[0]); |
| ulong start; |
| int flag; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ( (*((vu_long *)dest) & data) != data ) |
| { |
| return (2); |
| } |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr[0x0555] = 0x00AA00AA; |
| addr[0x02AA] = 0x00550055; |
| addr[0x0555] = 0x00A000A0; |
| |
| *((vu_long *)dest) = data; |
| |
| /* re-enable interrupts if necessary */ |
| if ( flag ) |
| enable_interrupts(); |
| |
| /* data polling for D7 */ |
| start = get_timer (0); |
| while ( (*((vu_long *)dest) & 0x00800080) != (data & 0x00800080) ) |
| { |
| if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) |
| { |
| return (1); |
| } |
| } |
| |
| return (0); |
| } |
| |
| /*----------------------------------------------------------------------- |
| * Write a byte to Flash, returns: |
| * 0 - OK |
| * 1 - write timeout |
| * 2 - Flash not erased |
| */ |
| static int |
| write_byte (flash_info_t *info, |
| ulong dest, |
| uchar data) |
| { |
| volatile unsigned char *addr = (volatile unsigned char *)(info->start[0]); |
| ulong start; |
| int flag; |
| |
| /* Check if Flash is (sufficiently) erased */ |
| if ( (*((volatile unsigned char *)dest) & data) != data ) |
| { |
| return (2); |
| } |
| /* Disable interrupts which might cause a timeout here */ |
| flag = disable_interrupts(); |
| |
| addr[0x0555] = 0xAA; |
| addr[0x02AA] = 0x55; |
| addr[0x0555] = 0xA0; |
| |
| *((volatile unsigned char *)dest) = data; |
| |
| /* re-enable interrupts if necessary */ |
| if ( flag ) |
| enable_interrupts(); |
| |
| /* data polling for D7 */ |
| start = get_timer (0); |
| while ( (*((volatile unsigned char *)dest) & 0x80) != (data & 0x80) ) |
| { |
| if ( get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT ) |
| { |
| return (1); |
| } |
| } |
| |
| return (0); |
| } |
| |
| /*----------------------------------------------------------------------- |
| */ |