| // SPDX-License-Identifier: (GPL-2.0+ OR MIT) |
| /* |
| * Copyright (C) 2023 Martin Botka <martin.botka@somainline.org>. |
| */ |
| |
| /dts-v1/; |
| |
| #include "sun50i-h616.dtsi" |
| #include "sun50i-h616-cpu-opp.dtsi" |
| |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/leds/common.h> |
| |
| / { |
| aliases { |
| ethernet0 = &rtl8189ftv; |
| }; |
| |
| leds { |
| compatible = "gpio-leds"; |
| |
| led-0 { |
| function = LED_FUNCTION_STATUS; |
| color = <LED_COLOR_ID_GREEN>; |
| gpios = <&pio 7 5 GPIO_ACTIVE_HIGH>; /* PH5 */ |
| }; |
| }; |
| |
| reg_vcc5v: regulator-vcc5v { |
| /* board wide 5V supply from carrier boards */ |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc-5v"; |
| regulator-min-microvolt = <5000000>; |
| regulator-max-microvolt = <5000000>; |
| regulator-always-on; |
| }; |
| |
| reg_vcc33_wifi: vcc33-wifi { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc33-wifi"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| vin-supply = <®_vcc5v>; |
| }; |
| |
| reg_vcc_wifi_io: vcc-wifi-io { |
| compatible = "regulator-fixed"; |
| regulator-name = "vcc-wifi-io"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| vin-supply = <®_vcc33_wifi>; |
| }; |
| |
| wifi_pwrseq: wifi-pwrseq { |
| compatible = "mmc-pwrseq-simple"; |
| clocks = <&rtc 1>; |
| clock-names = "ext_clock"; |
| reset-gpios = <&pio 6 18 GPIO_ACTIVE_LOW>; /* PG18 */ |
| post-power-on-delay-ms = <200>; |
| }; |
| }; |
| |
| &cpu0 { |
| cpu-supply = <®_dcdc2>; |
| }; |
| |
| &mmc0 { |
| vmmc-supply = <®_dldo1>; |
| /* Card detection pin is not connected */ |
| broken-cd; |
| bus-width = <4>; |
| status = "okay"; |
| }; |
| |
| &mmc1 { |
| vmmc-supply = <®_vcc33_wifi>; |
| vqmmc-supply = <®_vcc_wifi_io>; |
| mmc-pwrseq = <&wifi_pwrseq>; |
| bus-width = <4>; |
| non-removable; |
| mmc-ddr-1_8v; |
| status = "okay"; |
| |
| rtl8189ftv: wifi@1 { |
| reg = <1>; |
| }; |
| }; |
| |
| &r_i2c { |
| status = "okay"; |
| |
| axp313a: pmic@36 { |
| compatible = "x-powers,axp313a"; |
| reg = <0x36>; |
| interrupt-controller; |
| #interrupt-cells = <1>; |
| |
| regulators { |
| reg_dcdc1: dcdc1 { |
| regulator-name = "vdd-gpu-sys"; |
| regulator-min-microvolt = <810000>; |
| regulator-max-microvolt = <990000>; |
| regulator-always-on; |
| }; |
| |
| reg_dcdc2: dcdc2 { |
| regulator-name = "vdd-cpu"; |
| regulator-min-microvolt = <810000>; |
| regulator-max-microvolt = <1100000>; |
| regulator-ramp-delay = <200>; |
| regulator-always-on; |
| }; |
| |
| reg_dcdc3: dcdc3 { |
| regulator-name = "vcc-dram"; |
| regulator-min-microvolt = <1350000>; |
| regulator-max-microvolt = <1500000>; |
| regulator-always-on; |
| }; |
| |
| reg_aldo1: aldo1 { |
| regulator-name = "vcc-1v8-pll"; |
| regulator-min-microvolt = <1800000>; |
| regulator-max-microvolt = <1800000>; |
| regulator-always-on; |
| }; |
| |
| reg_dldo1: dldo1 { |
| regulator-name = "vcc-3v3-io"; |
| regulator-min-microvolt = <3300000>; |
| regulator-max-microvolt = <3300000>; |
| regulator-always-on; |
| }; |
| }; |
| }; |
| }; |
| |
| &usbphy { |
| status = "okay"; |
| }; |