| // SPDX-License-Identifier: GPL-2.0 |
| /* |
| * Copyright (C) 2024 Intel Corporation <www.intel.com> |
| */ |
| |
| /dts-v1/; |
| #include <dt-bindings/reset/altr,rst-mgr-agx5.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/clock/agilex5-clock.h> |
| |
| / { |
| compatible = "intel,socfpga-agilex"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| reserved-memory { |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| service_reserved: svcbuffer@0 { |
| compatible = "shared-dma-pool"; |
| reg = <0x0 0x0 0x0 0x1000000>; |
| alignment = <0x1000>; |
| no-map; |
| }; |
| }; |
| |
| cpus { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| cpu0: cpu@0 { |
| compatible = "arm,cortex-a55"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x0>; |
| }; |
| |
| cpu1: cpu@1 { |
| compatible = "arm,cortex-a55"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x1>; |
| }; |
| |
| cpu2: cpu@2 { |
| compatible = "arm,cortex-a76"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x2>; |
| }; |
| |
| cpu3: cpu@3 { |
| compatible = "arm,cortex-a76"; |
| device_type = "cpu"; |
| enable-method = "psci"; |
| reg = <0x3>; |
| }; |
| }; |
| |
| pmu { |
| compatible = "arm,armv8-pmuv3"; |
| interrupts = <0 170 4>, |
| <0 171 4>, |
| <0 172 4>, |
| <0 173 4>; |
| interrupt-affinity = <&cpu0>, |
| <&cpu1>, |
| <&cpu2>, |
| <&cpu3>; |
| interrupt-parent = <&intc>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-0.2"; |
| method = "smc"; |
| }; |
| |
| intc: intc@fffc1000 { |
| compatible = "arm,gic-400", "arm,cortex-a15-gic"; |
| #interrupt-cells = <3>; |
| interrupt-controller; |
| reg = <0x0 0x1d000000 0x0 0x10000>; |
| }; |
| |
| soc { |
| #address-cells = <1>; |
| #size-cells = <1>; |
| compatible = "simple-bus"; |
| device_type = "soc"; |
| interrupt-parent = <&intc>; |
| ranges = <0 0 0 0xffffffff>; |
| |
| base_fpga_region { |
| #address-cells = <0x1>; |
| #size-cells = <0x1>; |
| compatible = "fpga-region"; |
| fpga-mgr = <&fpga_mgr>; |
| }; |
| |
| clkmgr: clock-controller@10d10000 { |
| compatible = "intel,agilex5-clkmgr"; |
| reg = <0x10d10000 0x1000>; |
| #clock-cells = <1>; |
| }; |
| |
| clocks { |
| cb_intosc_hs_div2_clk: cb-intosc-hs-div2-clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| cb_intosc_ls_clk: cb-intosc-ls-clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| f2s_free_clk: f2s-free-clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| osc1: osc1 { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| }; |
| |
| qspi_clk: qspi-clk { |
| #clock-cells = <0>; |
| compatible = "fixed-clock"; |
| clock-frequency = <200000000>; |
| }; |
| }; |
| gmac0: ethernet@10810000 { |
| compatible = "intel,socfpga-dwxgmac", "snps,dwxgmac-2.10", "snps,dwxgmac"; |
| reg = <0x10810000 0x3500>; |
| interrupts = <0 190 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00]; |
| resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>; |
| reset-names = "stmmaceth", "stmmaceth-ocp"; |
| tx-fifo-depth = <32768>; |
| rx-fifo-depth = <16384>; |
| iommus = <&smmu 1>; |
| altr,sysmgr-syscon = <&sysmgr 0x44 0>; |
| clocks = <&clkmgr AGILEX5_EMAC0_CLK>; |
| clock-names = "stmmaceth"; |
| status = "disabled"; |
| }; |
| |
| gmac1: ethernet@10820000 { |
| compatible = "intel,socfpga-dwxgmac", "snps,dwxgmac-2.10", "snps,dwxgmac"; |
| reg = <0x10820000 0x3500>; |
| interrupts = <0 207 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00]; |
| resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>; |
| reset-names = "stmmaceth", "stmmaceth-ocp"; |
| tx-fifo-depth = <32768>; |
| rx-fifo-depth = <16384>; |
| iommus = <&smmu 2>; |
| altr,sysmgr-syscon = <&sysmgr 0x48 0>; |
| clocks = <&clkmgr AGILEX5_EMAC1_CLK>; |
| clock-names = "stmmaceth"; |
| status = "disabled"; |
| }; |
| |
| gmac2: ethernet@10830000 { |
| compatible = "intel,socfpga-dwxgmac", "snps,dwxgmac-2.10", "snps,dwxgmac"; |
| reg = <0x10830000 0x3500>; |
| interrupts = <0 224 4>; |
| interrupt-names = "macirq"; |
| mac-address = [00 00 00 00 00 00]; |
| resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>; |
| reset-names = "stmmaceth", "stmmaceth-ocp"; |
| tx-fifo-depth = <32768>; |
| rx-fifo-depth = <16384>; |
| iommus = <&smmu 3>; |
| altr,sysmgr-syscon = <&sysmgr 0x4c 0>; |
| clocks = <&clkmgr AGILEX5_EMAC2_CLK>; |
| clock-names = "stmmaceth"; |
| status = "disabled"; |
| }; |
| |
| gpio0: gpio@10c03200 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0x10c03200 0x80>; |
| resets = <&rst GPIO0_RESET>; |
| status = "disabled"; |
| |
| porta: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <24>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 110 4>; |
| }; |
| }; |
| |
| gpio1: gpio@10c03300 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,dw-apb-gpio"; |
| reg = <0x10c03300 0x80>; |
| resets = <&rst GPIO1_RESET>; |
| status = "disabled"; |
| |
| portb: gpio-controller@0 { |
| compatible = "snps,dw-apb-gpio-port"; |
| gpio-controller; |
| #gpio-cells = <2>; |
| snps,nr-gpios = <24>; |
| reg = <0>; |
| interrupt-controller; |
| #interrupt-cells = <2>; |
| interrupts = <0 111 4>; |
| }; |
| }; |
| |
| i2c0: i2c@10c02800 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x10c02800 0x100>; |
| interrupts = <0 103 4>; |
| resets = <&rst I2C0_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@10c02900 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x10c02900 0x100>; |
| interrupts = <0 104 4>; |
| resets = <&rst I2C1_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@10c02a00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x10c02a00 0x100>; |
| interrupts = <0 105 4>; |
| resets = <&rst I2C2_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@10c02b00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x10c02b00 0x100>; |
| interrupts = <0 106 4>; |
| resets = <&rst I2C3_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@10c02c00 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "snps,designware-i2c"; |
| reg = <0x10c02c00 0x100>; |
| interrupts = <0 107 4>; |
| resets = <&rst I2C4_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| status = "disabled"; |
| }; |
| |
| i3c0: i3c@10da0000 { |
| compatible = "snps,dw-i3c-master-1.00a"; |
| reg = <0x10da0000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0 164 4>; |
| resets = <&rst I3C0_RESET>; |
| max_devices = <11>; |
| clocks = <&clkmgr AGILEX5_L4_MP_CLK>; |
| status = "disabled"; |
| }; |
| |
| i3c1: i3c@10da1000 { |
| compatible = "snps,dw-i3c-master-1.00a"; |
| reg = <0x10da1000 0x1000>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| interrupts = <0 165 4>; |
| resets = <&rst I3C1_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_MP_CLK>; |
| max_devices = <11>; |
| status = "disabled"; |
| }; |
| |
| combophy0: combophy@0 { |
| #phy-cells = <0>; |
| phy-type = <1>; |
| compatible = "cdns,combophy"; |
| reg = <0x10808000 0x1000>; |
| resets = <&rst COMBOPHY_RESET>; |
| reset-names = "reset"; |
| status = "disabled"; |
| }; |
| |
| mmc: mmc0@10808000 { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| compatible = "cdns,sd4hc"; |
| reg = <0x10808000 0x1000>; |
| interrupts = <0 96 4>; |
| phys = <&combophy0>; |
| phy-names = "combo-phy"; |
| clocks = <&clkmgr AGILEX5_L4_MP_CLK>, |
| <&clkmgr AGILEX5_SDMMC_CLK>; |
| clock-names = "biu", "ciu"; |
| fifo-depth = <0x800>; |
| resets = <&rst SDMMC_RESET>; |
| reset-names = "reset"; |
| iommus = <&smmu 5>; |
| status = "disabled"; |
| }; |
| |
| ocram: sram@00000000 { |
| compatible = "mmio-sram"; |
| reg = <0x00000000 0x200000>; |
| }; |
| |
| rst: rstmgr@10d11000 { |
| #reset-cells = <1>; |
| compatible = "altr,stratix10-rst-mgr"; |
| reg = <0x10d11000 0x1000>; |
| }; |
| |
| smmu: iommu@16000000 { |
| compatible = "arm,mmu-500", "arm,smmu-v2"; |
| reg = <0x16000000 0x40000>; |
| #global-interrupts = <2>; |
| #iommu-cells = <1>; |
| interrupt-parent = <&intc>; |
| interrupts = <0 128 4>, /* Global Secure Fault */ |
| <0 129 4>, /* Global Non-secure Fault */ |
| /* Non-secure Context Interrupts (32) */ |
| <0 138 4>, <0 139 4>, <0 140 4>, <0 141 4>, |
| <0 142 4>, <0 143 4>, <0 144 4>, <0 145 4>, |
| <0 146 4>, <0 147 4>, <0 148 4>, <0 149 4>, |
| <0 150 4>, <0 151 4>, <0 152 4>, <0 153 4>, |
| <0 154 4>, <0 155 4>, <0 156 4>, <0 157 4>, |
| <0 158 4>, <0 159 4>, <0 160 4>, <0 161 4>, |
| <0 162 4>, <0 163 4>, <0 164 4>, <0 165 4>, |
| <0 166 4>, <0 167 4>, <0 168 4>, <0 169 4>; |
| stream-match-mask = <0x7ff0>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@10da4000 { |
| compatible = "intel,agilex-spi", |
| "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x10da4000 0x1000>; |
| interrupts = <0 99 4>; |
| resets = <&rst SPIM0_RESET>; |
| reg-io-width = <4>; |
| num-cs = <4>; |
| clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@10da5000 { |
| compatible = "intel,agilex-spi", |
| "snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x10da5000 0x1000>; |
| interrupts = <0 100 4>; |
| resets = <&rst SPIM1_RESET>; |
| reg-io-width = <4>; |
| num-cs = <4>; |
| clocks = <&clkmgr AGILEX5_L4_MAIN_CLK>; |
| status = "disabled"; |
| }; |
| |
| sysmgr: sysmgr@10d12000 { |
| compatible = "altr,sys-mgr-s10","altr,sys-mgr"; |
| reg = <0x10d12000 0x500>; |
| }; |
| |
| /* Local timer */ |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <1 13 0xf08>, |
| <1 14 0xf08>, |
| <1 11 0xf08>, |
| <1 10 0xf08>; |
| }; |
| |
| timer0: timer0@10c03000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 113 4>; |
| reg = <0x10c03000 0x100>; |
| resets = <&rst SPTIMER0_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| clock-names = "timer"; |
| status = "disabled"; |
| }; |
| |
| timer1: timer1@10c03100 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 114 4>; |
| reg = <0x10c03100 0x100>; |
| resets = <&rst SPTIMER1_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| clock-names = "timer"; |
| status = "disabled"; |
| }; |
| |
| timer2: timer2@10d00000 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 115 4>; |
| reg = <0x10d00000 0x100>; |
| resets = <&rst L4SYSTIMER0_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| clock-names = "timer"; |
| status = "disabled"; |
| }; |
| |
| timer3: timer3@10d00100 { |
| compatible = "snps,dw-apb-timer"; |
| interrupts = <0 116 4>; |
| reg = <0x10d00100 0x100>; |
| resets = <&rst L4SYSTIMER1_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| clock-names = "timer"; |
| status = "disabled"; |
| }; |
| |
| uart0: serial0@10c02000 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x10c02000 0x100>; |
| interrupts = <0 108 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| resets = <&rst UART0_RESET>; |
| status = "disabled"; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| clock-frequency = <100000000>; |
| }; |
| |
| uart1: serial1@10c02100 { |
| compatible = "snps,dw-apb-uart"; |
| reg = <0x10c02100 0x100>; |
| interrupts = <0 109 4>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| resets = <&rst UART1_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SP_CLK>; |
| status = "disabled"; |
| }; |
| |
| usbphy0: usbphy@0 { |
| #phy-cells = <0>; |
| compatible = "usb-nop-xceiv"; |
| clocks = <&clkmgr AGILEX5_USB_CLK>; |
| status = "disabled"; |
| }; |
| |
| usb0: usb@10b00000 { |
| compatible = "snps,dwc2"; |
| reg = <0x10b00000 0x40000>; |
| interrupts = <0 93 4>; |
| phys = <&usbphy0>; |
| phy-names = "usb2-phy"; |
| resets = <&rst USB0_RESET>, <&rst USB0_OCP_RESET>; |
| reset-names = "dwc2", "dwc2-ecc"; |
| clocks = <&clkmgr AGILEX5_USB_CLK>; |
| iommus = <&smmu 6>; |
| status = "disabled"; |
| }; |
| |
| usb31: usb31@11000000 { |
| compatible = "snps,dwc3"; |
| reg = <0x11000000 0x100000>; |
| resets = <&rst USB1_RESET>; |
| phys = <&usbphy0>, <&usbphy0>; |
| phy-names = "usb2-phy", "usb3-phy"; |
| dr_mode = "host"; |
| maximum-speed = "super-speed"; |
| snps,dis_u2_susphy_quirk; |
| status = "disabled"; |
| }; |
| |
| watchdog0: watchdog@10d00200 { |
| compatible = "snps,dw-wdt"; |
| reg = <0x10d00200 0x100>; |
| interrupts = <0 117 4>; |
| resets = <&rst WATCHDOG0_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| status = "disabled"; |
| }; |
| |
| watchdog1: watchdog@10d00300 { |
| compatible = "snps,dw-wdt"; |
| reg = <0x10d00300 0x100>; |
| interrupts = <0 118 4>; |
| resets = <&rst WATCHDOG1_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| status = "disabled"; |
| }; |
| |
| watchdog2: watchdog@10d00400 { |
| compatible = "snps,dw-wdt"; |
| reg = <0x10d00400 0x100>; |
| interrupts = <0 125 4>; |
| resets = <&rst WATCHDOG2_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| status = "disabled"; |
| }; |
| |
| watchdog3: watchdog@10d00500 { |
| compatible = "snps,dw-wdt"; |
| reg = <0x10d00500 0x100>; |
| interrupts = <0 126 4>; |
| resets = <&rst WATCHDOG3_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| status = "disabled"; |
| }; |
| |
| watchdog4: watchdog@10d00600 { |
| compatible = "snps,dw-wdt"; |
| reg = <0x10d00600 0x100>; |
| interrupts = <0 175 4>; |
| resets = <&rst WATCHDOG4_RESET>; |
| clocks = <&clkmgr AGILEX5_L4_SYS_FREE_CLK>; |
| status = "disabled"; |
| }; |
| |
| /* QSPI address not available yet */ |
| qspi: spi@108d2000 { |
| compatible = "cdns,qspi-nor"; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| reg = <0x108d2000 0x100>, |
| <0x10900000 0x100000>; |
| interrupts = <0 3 4>; |
| cdns,fifo-depth = <128>; |
| cdns,fifo-width = <4>; |
| cdns,trigger-address = <0x00000000>; |
| clocks = <&qspi_clk>; |
| |
| status = "disabled"; |
| }; |
| |
| firmware { |
| svc { |
| compatible = "intel,stratix10-svc"; |
| method = "smc"; |
| memory-region = <&service_reserved>; |
| |
| fpga_mgr: fpga-mgr { |
| compatible = "intel,stratix10-soc-fpga-mgr"; |
| }; |
| }; |
| }; |
| }; |
| }; |