| // SPDX-License-Identifier: GPL-2.0-or-later |
| /* |
| * Copyright (C) 2021 PHYTEC Messtechnik GmbH |
| * Author: Teresa Remmet <t.remmet@phytec.de> |
| */ |
| |
| / { |
| binman: binman { |
| }; |
| |
| #ifdef CONFIG_OPTEE |
| firmware { |
| optee { |
| compatible = "linaro,optee-tz"; |
| method = "smc"; |
| }; |
| }; |
| #endif |
| }; |
| |
| #ifdef CONFIG_FSL_CAAM |
| &crypto { |
| bootph-pre-ram; |
| }; |
| #endif |
| |
| &soc { |
| bootph-all; |
| bootph-pre-ram; |
| }; |
| |
| &clk { |
| bootph-pre-ram; |
| bootph-all; |
| /delete-property/ assigned-clocks; |
| /delete-property/ assigned-clock-parents; |
| /delete-property/ assigned-clock-rates; |
| }; |
| |
| &osc_32k { |
| bootph-pre-ram; |
| bootph-all; |
| }; |
| |
| &osc_24m { |
| bootph-pre-ram; |
| bootph-all; |
| }; |
| |
| &aips1 { |
| bootph-pre-ram; |
| bootph-all; |
| }; |
| |
| &aips2 { |
| bootph-pre-ram; |
| }; |
| |
| &aips3 { |
| bootph-pre-ram; |
| spba-bus@30800000 { |
| bootph-pre-ram; |
| }; |
| }; |
| |
| &iomuxc { |
| bootph-pre-ram; |
| }; |
| |
| #ifdef CONFIG_FSL_CAAM |
| &sec_jr0 { |
| bootph-pre-ram; |
| }; |
| |
| &sec_jr1 { |
| bootph-pre-ram; |
| }; |
| |
| &sec_jr2 { |
| bootph-pre-ram; |
| }; |
| #endif |
| |
| &binman { |
| filename = "flash.bin"; |
| section { |
| pad-byte = <0x00>; |
| |
| #ifdef CONFIG_IMX_HAB |
| nxp-imx8mcst@0 { |
| filename = "u-boot-spl-mkimage.signed.bin"; |
| nxp,loader-address = <CONFIG_SPL_TEXT_BASE>; |
| nxp,unlock; |
| args; /* Needed by mkimage etype superclass */ |
| #endif |
| |
| binman_imx_spl: nxp-imx8mimage { |
| filename = "u-boot-spl-mkimage.bin"; |
| nxp,boot-from = "sd"; |
| nxp,rom-version = <2>; |
| nxp,loader-address = <CONFIG_SPL_TEXT_BASE>; |
| args; /* Needed by mkimage etype superclass */ |
| |
| section { |
| filename = "u-boot-spl-ddr.bin"; |
| pad-byte = <0xff>; |
| align-size = <4>; |
| align = <4>; |
| |
| u-boot-spl { |
| align-end = <4>; |
| }; |
| |
| ddr-1d-imem-fw { |
| filename = "lpddr4_pmu_train_1d_imem_202006.bin"; |
| type = "blob-ext"; |
| align-end = <4>; |
| }; |
| |
| ddr-1d-dmem-fw { |
| filename = "lpddr4_pmu_train_1d_dmem_202006.bin"; |
| type = "blob-ext"; |
| align-end = <4>; |
| }; |
| |
| ddr-2d-imem-fw { |
| filename = "lpddr4_pmu_train_2d_imem_202006.bin"; |
| type = "blob-ext"; |
| align-end = <4>; |
| }; |
| |
| ddr-2d-dmem-fw { |
| filename = "lpddr4_pmu_train_2d_dmem_202006.bin"; |
| type = "blob-ext"; |
| align-end = <4>; |
| }; |
| }; |
| }; |
| #ifdef CONFIG_IMX_HAB |
| }; |
| |
| nxp-imx8mcst@1 { |
| filename = "u-boot-fit.signed.bin"; |
| nxp,loader-address = <CONFIG_SPL_LOAD_FIT_ADDRESS>; |
| offset = <0x58000>; |
| args; /* Needed by mkimage etype superclass */ |
| #endif |
| |
| binman_imx_fit: fit { |
| description = "Configuration to load ATF before U-Boot"; |
| #ifndef CONFIG_IMX_HAB |
| fit,external-offset = <CONFIG_FIT_EXTERNAL_OFFSET>; |
| #endif |
| fit,fdt-list = "of-list"; |
| #address-cells = <1>; |
| offset = <0x58000>; |
| |
| images { |
| uboot { |
| description = "U-Boot (64-bit)"; |
| type = "standalone"; |
| arch = "arm64"; |
| compression = "none"; |
| load = <CONFIG_TEXT_BASE>; |
| |
| uboot_blob: blob-ext { |
| filename = "u-boot-nodtb.bin"; |
| }; |
| }; |
| |
| #ifndef CONFIG_ARMV8_PSCI |
| atf { |
| description = "ARM Trusted Firmware"; |
| type = "firmware"; |
| arch = "arm64"; |
| compression = "none"; |
| load = <0x970000>; |
| entry = <0x970000>; |
| |
| atf_blob: atf-blob { |
| filename = "bl31.bin"; |
| type = "atf-bl31"; |
| }; |
| }; |
| #endif |
| |
| @fdt-SEQ { |
| description = "NAME"; |
| type = "flat_dt"; |
| compression = "none"; |
| |
| blob-ext { |
| filename = "u-boot.dtb"; |
| }; |
| }; |
| }; |
| |
| configurations { |
| default = "@config-DEFAULT-SEQ"; |
| |
| @config-SEQ { |
| description = "NAME"; |
| fdt = "fdt-SEQ"; |
| firmware = "uboot"; |
| #ifndef CONFIG_ARMV8_PSCI |
| loadables = "atf"; |
| #endif |
| }; |
| }; |
| }; |
| #ifdef CONFIG_IMX_HAB |
| }; |
| #endif |
| }; |
| }; |