| /* |
| * (C) Copyright 2011 |
| * Linaro |
| * Linus Walleij <linus.walleij@linaro.org> |
| * Register definitions for the External Bus Interface (EBI) |
| * found in the ARM Integrator AP and CP reference designs |
| * |
| * SPDX-License-Identifier: GPL-2.0+ |
| */ |
| |
| #ifndef __ARM_EBI_H |
| #define __ARM_EBI_H |
| |
| #define EBI_BASE 0x12000000 |
| |
| #define EBI_CSR0_REG 0x00 /* CS0 = Boot ROM */ |
| #define EBI_CSR1_REG 0x04 /* CS1 = Flash */ |
| #define EBI_CSR2_REG 0x08 /* CS2 = SSRAM */ |
| #define EBI_CSR3_REG 0x0C /* CS3 = Expansion memory */ |
| /* |
| * The four upper bits are the waitstates for each chip select |
| * 0x00 = 2 cycles, 0x10 = 3 cycles, ... 0xe0 = 16 cycles, 0xf0 = 16 cycles |
| */ |
| #define EBI_CSR_WAIT_MASK 0xF0 |
| /* Whether memory is synchronous or asynchronous */ |
| #define EBI_CSR_SYNC_MASK 0xF7 |
| #define EBI_CSR_ASYNC 0x00 |
| #define EBI_CSR_SYNC 0x08 |
| /* Whether memory is write enabled or not */ |
| #define EBI_CSR_WREN_MASK 0xFB |
| #define EBI_CSR_WREN_DISABLE 0x00 |
| #define EBI_CSR_WREN_ENABLE 0x04 |
| /* Memory bit width for each chip select */ |
| #define EBI_CSR_MEMSIZE_MASK 0xFC |
| #define EBI_CSR_MEMSIZE_8BIT 0x00 |
| #define EBI_CSR_MEMSIZE_16BIT 0x01 |
| #define EBI_CSR_MEMSIZE_32BIT 0x02 |
| |
| /* |
| * The lock register need to be written with 0xa05f before anything in the |
| * EBI can be changed. |
| */ |
| #define EBI_LOCK_REG 0x20 |
| #define EBI_UNLOCK_MAGIC 0xA05F |
| |
| #endif |