blob: 5ba4770ebcbf779955492708c43dc0e4fc90825b [file] [log] [blame]
/*
* Copyright 2015 Freescale Semiconductor, Inc.
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <netdev.h>
#include <asm/io.h>
#include <asm/arch/fsl_serdes.h>
#include <asm/arch-fsl-lsch3/immap_lsch3.h>
#include <fsl_mdio.h>
#include <malloc.h>
#include <fm_eth.h>
#include <fsl-mc/ldpaa_wriop.h>
#include "../common/qixis.h"
#include "ls2085aqds_qixis.h"
#ifdef CONFIG_FSL_MC_ENET
/* - In LS2085A there are only 16 SERDES lanes, spread across 2 SERDES banks.
* Bank 1 -> Lanes A, B, C, D, E, F, G, H
* Bank 2 -> Lanes A,B, C, D, E, F, G, H
*/
/* Mapping of 16 SERDES lanes to LS2085A QDS board slots. A value of '0' here
* means that the mapping must be determined dynamically, or that the lane
* maps to something other than a board slot.
*/
static u8 lane_to_slot_fsm2[] = {
0, 0, 0, 0, 0, 0, 0, 0
};
/* On the Vitesse VSC8234XHG SGMII riser card there are 4 SGMII PHYs
* housed.
*/
static int riser_phy_addr[] = {
SGMII_CARD_PORT1_PHY_ADDR,
SGMII_CARD_PORT2_PHY_ADDR,
SGMII_CARD_PORT3_PHY_ADDR,
SGMII_CARD_PORT4_PHY_ADDR,
};
/* Slot2 does not have EMI connections */
#define EMI_NONE 0xFFFFFFFF
#define EMI1_SLOT1 0
#define EMI1_SLOT2 1
#define EMI1_SLOT3 2
#define EMI1_SLOT4 3
#define EMI1_SLOT5 4
#define EMI1_SLOT6 5
#define EMI2 6
#define SFP_TX 1
static const char * const mdio_names[] = {
"LS2085A_QDS_MDIO0",
"LS2085A_QDS_MDIO1",
"LS2085A_QDS_MDIO2",
"LS2085A_QDS_MDIO3",
"LS2085A_QDS_MDIO4",
"LS2085A_QDS_MDIO5",
DEFAULT_WRIOP_MDIO2_NAME,
};
struct ls2085a_qds_mdio {
u8 muxval;
struct mii_dev *realbus;
};
static const char *ls2085a_qds_mdio_name_for_muxval(u8 muxval)
{
return mdio_names[muxval];
}
struct mii_dev *mii_dev_for_muxval(u8 muxval)
{
struct mii_dev *bus;
const char *name = ls2085a_qds_mdio_name_for_muxval(muxval);
if (!name) {
printf("No bus for muxval %x\n", muxval);
return NULL;
}
bus = miiphy_get_dev_by_name(name);
if (!bus) {
printf("No bus by name %s\n", name);
return NULL;
}
return bus;
}
static void ls2085a_qds_enable_SFP_TX(u8 muxval)
{
u8 brdcfg9;
brdcfg9 = QIXIS_READ(brdcfg[9]);
brdcfg9 &= ~BRDCFG9_SFPTX_MASK;
brdcfg9 |= (muxval << BRDCFG9_SFPTX_SHIFT);
QIXIS_WRITE(brdcfg[9], brdcfg9);
}
static void ls2085a_qds_mux_mdio(u8 muxval)
{
u8 brdcfg4;
if (muxval <= 5) {
brdcfg4 = QIXIS_READ(brdcfg[4]);
brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
QIXIS_WRITE(brdcfg[4], brdcfg4);
}
}
static int ls2085a_qds_mdio_read(struct mii_dev *bus, int addr,
int devad, int regnum)
{
struct ls2085a_qds_mdio *priv = bus->priv;
ls2085a_qds_mux_mdio(priv->muxval);
return priv->realbus->read(priv->realbus, addr, devad, regnum);
}
static int ls2085a_qds_mdio_write(struct mii_dev *bus, int addr, int devad,
int regnum, u16 value)
{
struct ls2085a_qds_mdio *priv = bus->priv;
ls2085a_qds_mux_mdio(priv->muxval);
return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
}
static int ls2085a_qds_mdio_reset(struct mii_dev *bus)
{
struct ls2085a_qds_mdio *priv = bus->priv;
return priv->realbus->reset(priv->realbus);
}
static int ls2085a_qds_mdio_init(char *realbusname, u8 muxval)
{
struct ls2085a_qds_mdio *pmdio;
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate ls2085a_qds MDIO bus\n");
return -1;
}
pmdio = malloc(sizeof(*pmdio));
if (!pmdio) {
printf("Failed to allocate ls2085a_qds private data\n");
free(bus);
return -1;
}
bus->read = ls2085a_qds_mdio_read;
bus->write = ls2085a_qds_mdio_write;
bus->reset = ls2085a_qds_mdio_reset;
sprintf(bus->name, ls2085a_qds_mdio_name_for_muxval(muxval));
pmdio->realbus = miiphy_get_dev_by_name(realbusname);
if (!pmdio->realbus) {
printf("No bus with name %s\n", realbusname);
free(bus);
free(pmdio);
return -1;
}
pmdio->muxval = muxval;
bus->priv = pmdio;
return mdio_register(bus);
}
/*
* Initialize the dpmac_info array.
*
*/
static void initialize_dpmac_to_slot(void)
{
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
int serdes2_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK)
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
switch (serdes1_prtcl) {
case 0x2A:
printf("qds: WRIOP: Supported SerDes Protocol 0x%02x\n",
serdes1_prtcl);
break;
default:
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
serdes1_prtcl);
break;
}
switch (serdes2_prtcl) {
case 0x07:
case 0x08:
printf("qds: WRIOP: Supported SerDes Protocol 0x%02x\n",
serdes2_prtcl);
lane_to_slot_fsm2[0] = EMI1_SLOT4;
lane_to_slot_fsm2[1] = EMI1_SLOT4;
lane_to_slot_fsm2[2] = EMI1_SLOT4;
lane_to_slot_fsm2[3] = EMI1_SLOT4;
/* No MDIO physical connection */
lane_to_slot_fsm2[4] = EMI1_SLOT6;
lane_to_slot_fsm2[5] = EMI1_SLOT6;
lane_to_slot_fsm2[6] = EMI1_SLOT6;
lane_to_slot_fsm2[7] = EMI1_SLOT6;
break;
default:
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
serdes2_prtcl);
break;
}
}
void ls2085a_handle_phy_interface_sgmii(int dpmac_id)
{
int lane, slot;
struct mii_dev *bus;
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
int serdes2_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_MASK)
>> FSL_CHASSIS3_RCWSR28_SRDS2_PRTCL_SHIFT;
switch (serdes1_prtcl) {
}
switch (serdes2_prtcl) {
case 0x07:
case 0x08:
lane = serdes_get_first_lane(FSL_SRDS_2, SGMII9 +
(dpmac_id - 9));
slot = lane_to_slot_fsm2[lane];
switch (++slot) {
case 1:
break;
case 3:
break;
case 4:
/* Slot housing a SGMII riser card? */
wriop_set_phy_address(dpmac_id,
riser_phy_addr[dpmac_id - 9]);
dpmac_info[dpmac_id].board_mux = EMI1_SLOT4;
bus = mii_dev_for_muxval(EMI1_SLOT4);
wriop_set_mdio(dpmac_id, bus);
dpmac_info[dpmac_id].phydev = phy_connect(
dpmac_info[dpmac_id].bus,
dpmac_info[dpmac_id].phy_addr,
NULL,
dpmac_info[dpmac_id].enet_if);
phy_config(dpmac_info[dpmac_id].phydev);
break;
case 5:
break;
case 6:
/* Slot housing a SGMII riser card? */
wriop_set_phy_address(dpmac_id,
riser_phy_addr[dpmac_id - 13]);
dpmac_info[dpmac_id].board_mux = EMI1_SLOT6;
bus = mii_dev_for_muxval(EMI1_SLOT6);
wriop_set_mdio(dpmac_id, bus);
break;
}
break;
default:
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
serdes2_prtcl);
break;
}
}
void ls2085a_handle_phy_interface_xsgmii(int i)
{
struct ccsr_gur __iomem *gur = (void *)CONFIG_SYS_FSL_GUTS_ADDR;
int serdes1_prtcl = (in_le32(&gur->rcwsr[28]) &
FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_MASK)
>> FSL_CHASSIS3_RCWSR28_SRDS1_PRTCL_SHIFT;
switch (serdes1_prtcl) {
case 0x2A:
/*
* XFI does not need a PHY to work, but to avoid U-boot use
* default PHY address which is zero to a MAC when it found
* a MAC has no PHY address, we give a PHY address to XFI
* MAC, and should not use a real XAUI PHY address, since
* MDIO can access it successfully, and then MDIO thinks
* the XAUI card is used for the XFI MAC, which will cause
* error.
*/
wriop_set_phy_address(i, i + 4);
ls2085a_qds_enable_SFP_TX(SFP_TX);
break;
default:
printf("qds: WRIOP: Unsupported SerDes Protocol 0x%02x\n",
serdes1_prtcl);
break;
}
}
#endif
int board_eth_init(bd_t *bis)
{
int error;
#ifdef CONFIG_FSL_MC_ENET
struct memac_mdio_info *memac_mdio0_info;
struct memac_mdio_info *memac_mdio1_info;
unsigned int i;
initialize_dpmac_to_slot();
memac_mdio0_info = (struct memac_mdio_info *)malloc(
sizeof(struct memac_mdio_info));
memac_mdio0_info->regs =
(struct memac_mdio_controller *)
CONFIG_SYS_FSL_WRIOP1_MDIO1;
memac_mdio0_info->name = DEFAULT_WRIOP_MDIO1_NAME;
/* Register the real MDIO1 bus */
fm_memac_mdio_init(bis, memac_mdio0_info);
memac_mdio1_info = (struct memac_mdio_info *)malloc(
sizeof(struct memac_mdio_info));
memac_mdio1_info->regs =
(struct memac_mdio_controller *)
CONFIG_SYS_FSL_WRIOP1_MDIO2;
memac_mdio1_info->name = DEFAULT_WRIOP_MDIO2_NAME;
/* Register the real MDIO2 bus */
fm_memac_mdio_init(bis, memac_mdio1_info);
/* Register the muxing front-ends to the MDIO buses */
ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT1);
ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT2);
ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT3);
ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT4);
ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT5);
ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO1_NAME, EMI1_SLOT6);
ls2085a_qds_mdio_init(DEFAULT_WRIOP_MDIO2_NAME, EMI2);
for (i = WRIOP1_DPMAC1; i < NUM_WRIOP_PORTS; i++) {
switch (wriop_get_enet_if(i)) {
case PHY_INTERFACE_MODE_QSGMII:
break;
case PHY_INTERFACE_MODE_SGMII:
ls2085a_handle_phy_interface_sgmii(i);
break;
case PHY_INTERFACE_MODE_XGMII:
ls2085a_handle_phy_interface_xsgmii(i);
break;
default:
break;
}
}
error = cpu_eth_init(bis);
#endif
error = pci_eth_init(bis);
return error;
}