| // SPDX-License-Identifier: GPL-2.0+ |
| /* |
| * K2G EVM : Board initialization |
| * |
| * (C) Copyright 2015 |
| * Texas Instruments Incorporated, <www.ti.com> |
| */ |
| #include <common.h> |
| #include <env.h> |
| #include <init.h> |
| #include <asm/arch/clock.h> |
| #include <asm/ti-common/keystone_net.h> |
| #include <asm/arch/psc_defs.h> |
| #include <asm/arch/mmc_host_def.h> |
| #include <fdtdec.h> |
| #include <i2c.h> |
| #include <remoteproc.h> |
| #include "mux-k2g.h" |
| #include "../common/board_detect.h" |
| |
| #define K2G_GP_AUDIO_CODEC_ADDRESS 0x1B |
| |
| const unsigned int sysclk_array[MAX_SYSCLK] = { |
| 19200000, |
| 24000000, |
| 25000000, |
| 26000000, |
| }; |
| |
| unsigned int get_external_clk(u32 clk) |
| { |
| unsigned int clk_freq; |
| u8 sysclk_index = get_sysclk_index(); |
| |
| switch (clk) { |
| case sys_clk: |
| clk_freq = sysclk_array[sysclk_index]; |
| break; |
| case pa_clk: |
| clk_freq = sysclk_array[sysclk_index]; |
| break; |
| case tetris_clk: |
| clk_freq = sysclk_array[sysclk_index]; |
| break; |
| case ddr3a_clk: |
| clk_freq = sysclk_array[sysclk_index]; |
| break; |
| case uart_clk: |
| clk_freq = sysclk_array[sysclk_index]; |
| break; |
| default: |
| clk_freq = 0; |
| break; |
| } |
| |
| return clk_freq; |
| } |
| |
| int speeds[DEVSPEED_NUMSPDS] = { |
| SPD400, |
| SPD600, |
| SPD800, |
| SPD900, |
| SPD1000, |
| SPD900, |
| SPD800, |
| SPD600, |
| SPD400, |
| SPD200, |
| }; |
| |
| static int dev_speeds[DEVSPEED_NUMSPDS] = { |
| SPD600, |
| SPD800, |
| SPD900, |
| SPD1000, |
| SPD900, |
| SPD800, |
| SPD600, |
| SPD400, |
| }; |
| |
| static struct pll_init_data main_pll_config[MAX_SYSCLK][NUM_SPDS] = { |
| [SYSCLK_19MHz] = { |
| [SPD400] = {MAIN_PLL, 125, 3, 2}, |
| [SPD600] = {MAIN_PLL, 125, 2, 2}, |
| [SPD800] = {MAIN_PLL, 250, 3, 2}, |
| [SPD900] = {MAIN_PLL, 187, 2, 2}, |
| [SPD1000] = {MAIN_PLL, 104, 1, 2}, |
| }, |
| [SYSCLK_24MHz] = { |
| [SPD400] = {MAIN_PLL, 100, 3, 2}, |
| [SPD600] = {MAIN_PLL, 300, 6, 2}, |
| [SPD800] = {MAIN_PLL, 200, 3, 2}, |
| [SPD900] = {MAIN_PLL, 75, 1, 2}, |
| [SPD1000] = {MAIN_PLL, 250, 3, 2}, |
| }, |
| [SYSCLK_25MHz] = { |
| [SPD400] = {MAIN_PLL, 32, 1, 2}, |
| [SPD600] = {MAIN_PLL, 48, 1, 2}, |
| [SPD800] = {MAIN_PLL, 64, 1, 2}, |
| [SPD900] = {MAIN_PLL, 72, 1, 2}, |
| [SPD1000] = {MAIN_PLL, 80, 1, 2}, |
| }, |
| [SYSCLK_26MHz] = { |
| [SPD400] = {MAIN_PLL, 400, 13, 2}, |
| [SPD600] = {MAIN_PLL, 230, 5, 2}, |
| [SPD800] = {MAIN_PLL, 123, 2, 2}, |
| [SPD900] = {MAIN_PLL, 69, 1, 2}, |
| [SPD1000] = {MAIN_PLL, 384, 5, 2}, |
| }, |
| }; |
| |
| static struct pll_init_data tetris_pll_config[MAX_SYSCLK][NUM_SPDS] = { |
| [SYSCLK_19MHz] = { |
| [SPD200] = {TETRIS_PLL, 625, 6, 10}, |
| [SPD400] = {TETRIS_PLL, 125, 1, 6}, |
| [SPD600] = {TETRIS_PLL, 125, 1, 4}, |
| [SPD800] = {TETRIS_PLL, 333, 2, 4}, |
| [SPD900] = {TETRIS_PLL, 187, 2, 2}, |
| [SPD1000] = {TETRIS_PLL, 104, 1, 2}, |
| }, |
| [SYSCLK_24MHz] = { |
| [SPD200] = {TETRIS_PLL, 250, 3, 10}, |
| [SPD400] = {TETRIS_PLL, 100, 1, 6}, |
| [SPD600] = {TETRIS_PLL, 100, 1, 4}, |
| [SPD800] = {TETRIS_PLL, 400, 3, 4}, |
| [SPD900] = {TETRIS_PLL, 75, 1, 2}, |
| [SPD1000] = {TETRIS_PLL, 250, 3, 2}, |
| }, |
| [SYSCLK_25MHz] = { |
| [SPD200] = {TETRIS_PLL, 80, 1, 10}, |
| [SPD400] = {TETRIS_PLL, 96, 1, 6}, |
| [SPD600] = {TETRIS_PLL, 96, 1, 4}, |
| [SPD800] = {TETRIS_PLL, 128, 1, 4}, |
| [SPD900] = {TETRIS_PLL, 72, 1, 2}, |
| [SPD1000] = {TETRIS_PLL, 80, 1, 2}, |
| }, |
| [SYSCLK_26MHz] = { |
| [SPD200] = {TETRIS_PLL, 307, 4, 10}, |
| [SPD400] = {TETRIS_PLL, 369, 4, 6}, |
| [SPD600] = {TETRIS_PLL, 369, 4, 4}, |
| [SPD800] = {TETRIS_PLL, 123, 1, 4}, |
| [SPD900] = {TETRIS_PLL, 69, 1, 2}, |
| [SPD1000] = {TETRIS_PLL, 384, 5, 2}, |
| }, |
| }; |
| |
| static struct pll_init_data uart_pll_config[MAX_SYSCLK] = { |
| [SYSCLK_19MHz] = {UART_PLL, 160, 1, 8}, |
| [SYSCLK_24MHz] = {UART_PLL, 128, 1, 8}, |
| [SYSCLK_25MHz] = {UART_PLL, 768, 5, 10}, |
| [SYSCLK_26MHz] = {UART_PLL, 384, 13, 2}, |
| }; |
| |
| static struct pll_init_data nss_pll_config[MAX_SYSCLK] = { |
| [SYSCLK_19MHz] = {NSS_PLL, 625, 6, 2}, |
| [SYSCLK_24MHz] = {NSS_PLL, 250, 3, 2}, |
| [SYSCLK_25MHz] = {NSS_PLL, 80, 1, 2}, |
| [SYSCLK_26MHz] = {NSS_PLL, 1000, 13, 2}, |
| }; |
| |
| static struct pll_init_data ddr3_pll_config_800[MAX_SYSCLK] = { |
| [SYSCLK_19MHz] = {DDR3A_PLL, 167, 1, 16}, |
| [SYSCLK_24MHz] = {DDR3A_PLL, 133, 1, 16}, |
| [SYSCLK_25MHz] = {DDR3A_PLL, 128, 1, 16}, |
| [SYSCLK_26MHz] = {DDR3A_PLL, 123, 1, 16}, |
| }; |
| |
| static struct pll_init_data ddr3_pll_config_1066[MAX_SYSCLK] = { |
| [SYSCLK_19MHz] = {DDR3A_PLL, 194, 1, 14}, |
| [SYSCLK_24MHz] = {DDR3A_PLL, 156, 1, 14}, |
| [SYSCLK_25MHz] = {DDR3A_PLL, 149, 1, 14}, |
| [SYSCLK_26MHz] = {DDR3A_PLL, 144, 1, 14}, |
| }; |
| |
| struct pll_init_data *get_pll_init_data(int pll) |
| { |
| int speed; |
| struct pll_init_data *data = NULL; |
| u8 sysclk_index = get_sysclk_index(); |
| |
| switch (pll) { |
| case MAIN_PLL: |
| speed = get_max_dev_speed(dev_speeds); |
| data = &main_pll_config[sysclk_index][speed]; |
| break; |
| case TETRIS_PLL: |
| speed = get_max_arm_speed(speeds); |
| data = &tetris_pll_config[sysclk_index][speed]; |
| break; |
| case NSS_PLL: |
| data = &nss_pll_config[sysclk_index]; |
| break; |
| case UART_PLL: |
| data = &uart_pll_config[sysclk_index]; |
| break; |
| case DDR3_PLL: |
| if (cpu_revision() & CPU_66AK2G1x) { |
| speed = get_max_arm_speed(speeds); |
| if (speed == SPD1000) |
| data = &ddr3_pll_config_1066[sysclk_index]; |
| else |
| data = &ddr3_pll_config_800[sysclk_index]; |
| } else { |
| data = &ddr3_pll_config_800[sysclk_index]; |
| } |
| break; |
| default: |
| data = NULL; |
| } |
| |
| return data; |
| } |
| |
| s16 divn_val[16] = { |
| -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1, -1 |
| }; |
| |
| #if defined(CONFIG_MMC) |
| int board_mmc_init(bd_t *bis) |
| { |
| if (psc_enable_module(KS2_LPSC_MMC)) { |
| printf("%s module enabled failed\n", __func__); |
| return -1; |
| } |
| |
| if (board_is_k2g_gp() || board_is_k2g_g1()) |
| omap_mmc_init(0, 0, 0, -1, -1); |
| |
| omap_mmc_init(1, 0, 0, -1, -1); |
| return 0; |
| } |
| #endif |
| |
| #if defined(CONFIG_MULTI_DTB_FIT) |
| int board_fit_config_name_match(const char *name) |
| { |
| bool eeprom_read = board_ti_was_eeprom_read(); |
| |
| if (!strcmp(name, "keystone-k2g-generic") && !eeprom_read) |
| return 0; |
| else if (!strcmp(name, "keystone-k2g-evm") && |
| (board_ti_is("66AK2GGP") || board_ti_is("66AK2GG1"))) |
| return 0; |
| else if (!strcmp(name, "keystone-k2g-ice") && board_ti_is("66AK2GIC")) |
| return 0; |
| else |
| return -1; |
| } |
| #endif |
| |
| #if defined(CONFIG_DTB_RESELECT) |
| static int k2g_alt_board_detect(void) |
| { |
| #ifndef CONFIG_DM_I2C |
| int rc; |
| |
| rc = i2c_set_bus_num(1); |
| if (rc) |
| return rc; |
| |
| rc = i2c_probe(K2G_GP_AUDIO_CODEC_ADDRESS); |
| if (rc) |
| return rc; |
| #else |
| struct udevice *bus, *dev; |
| int rc; |
| |
| rc = uclass_get_device_by_seq(UCLASS_I2C, 1, &bus); |
| if (rc) |
| return rc; |
| rc = dm_i2c_probe(bus, K2G_GP_AUDIO_CODEC_ADDRESS, 0, &dev); |
| if (rc) |
| return rc; |
| #endif |
| ti_i2c_eeprom_am_set("66AK2GGP", "1.0X"); |
| |
| return 0; |
| } |
| |
| static void k2g_reset_mux_config(void) |
| { |
| /* Unlock the reset mux register */ |
| clrbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK); |
| |
| /* Configure BOOTCFG_RSTMUX8 for WDT event to cause a device reset */ |
| clrsetbits_le32(KS2_RSTMUX8, RSTMUX_OMODE8_MASK, |
| RSTMUX_OMODE8_DEV_RESET << RSTMUX_OMODE8_SHIFT); |
| |
| /* lock the reset mux register to prevent any spurious writes. */ |
| setbits_le32(KS2_RSTMUX8, RSTMUX_LOCK8_MASK); |
| } |
| |
| int embedded_dtb_select(void) |
| { |
| int rc; |
| rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, |
| CONFIG_EEPROM_CHIP_ADDRESS); |
| if (rc) { |
| rc = k2g_alt_board_detect(); |
| if (rc) { |
| printf("Unable to do board detection\n"); |
| return -1; |
| } |
| } |
| |
| fdtdec_setup(); |
| |
| k2g_mux_config(); |
| |
| k2g_reset_mux_config(); |
| |
| if (board_is_k2g_gp() || board_is_k2g_g1()) { |
| /* deassert FLASH_HOLD */ |
| clrbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_DIR_OFFSET, |
| BIT(9)); |
| setbits_le32(K2G_GPIO1_BANK2_BASE + K2G_GPIO_SETDATA_OFFSET, |
| BIT(9)); |
| } else if (board_is_k2g_ice()) { |
| /* GBE Phy workaround. For Phy to latch the input |
| * configuration, a GPIO reset is asserted at the |
| * Phy reset pin to latch configuration correctly after SoC |
| * reset. GPIO0 Pin 10 (Ball AA20) is used for this on ICE |
| * board. Just do a low to high transition. |
| */ |
| clrbits_le32(K2G_GPIO0_BANK0_BASE + K2G_GPIO_DIR_OFFSET, |
| BIT(10)); |
| setbits_le32(K2G_GPIO0_BANK0_BASE + K2G_GPIO_CLRDATA_OFFSET, |
| BIT(10)); |
| /* Delay just to get a transition to high */ |
| udelay(100); |
| setbits_le32(K2G_GPIO0_BANK0_BASE + K2G_GPIO_SETDATA_OFFSET, |
| BIT(10)); |
| } |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_BOARD_LATE_INIT |
| int board_late_init(void) |
| { |
| #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_TI_I2C_BOARD_DETECT) |
| int rc; |
| |
| rc = ti_i2c_eeprom_am_get(CONFIG_EEPROM_BUS_ADDRESS, |
| CONFIG_EEPROM_CHIP_ADDRESS); |
| if (rc) |
| printf("ti_i2c_eeprom_init failed %d\n", rc); |
| |
| board_ti_set_ethaddr(1); |
| #endif |
| |
| #ifdef CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG |
| if (board_is_k2g_gp()) |
| env_set("board_name", "66AK2GGP\0"); |
| else if (board_is_k2g_g1()) |
| env_set("board_name", "66AK2GG1\0"); |
| else if (board_is_k2g_ice()) |
| env_set("board_name", "66AK2GIC\0"); |
| #endif |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_BOARD_EARLY_INIT_F |
| int board_early_init_f(void) |
| { |
| init_plls(); |
| |
| k2g_mux_config(); |
| |
| return 0; |
| } |
| #endif |
| |
| #ifdef CONFIG_SPL_BUILD |
| void spl_init_keystone_plls(void) |
| { |
| init_plls(); |
| } |
| #endif |
| |
| #ifdef CONFIG_TI_SECURE_DEVICE |
| void board_pmmc_image_process(ulong pmmc_image, size_t pmmc_size) |
| { |
| int id = env_get_ulong("dev_pmmc", 10, 0); |
| int ret; |
| |
| if (!rproc_is_initialized()) |
| rproc_init(); |
| |
| ret = rproc_load(id, pmmc_image, pmmc_size); |
| printf("Load Remote Processor %d with data@addr=0x%08lx %u bytes:%s\n", |
| id, pmmc_image, pmmc_size, ret ? " Failed!" : " Success!"); |
| |
| if (!ret) |
| rproc_start(id); |
| } |
| |
| U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_PMMC, board_pmmc_image_process); |
| #endif |